Cannot display the properties of field point

Similar Questions

• Cannot display the properties of Amplitude and level controls

  I'm new to LabVIEW and just installed ver 8.6 on my machine. When I open the TutorialGenAnalyzeDisp1.vi, the run button is disabled. When I double click on the Amplitude and measures of level, I get a dialog box says "cannot display properties. If I click on the run button, I get an error message: "errors of block diagram / Subvi 'Amplitude and level measurements': Subvi is not executable."

  I have the LabVIEW base development system. Is it possible that I don't have that element in my library or an installation problem? I look forward to re - install LabVIEW. It took over 3 hours to install.

  Hi jdai

  The Amplitude and the level of the Express VI measures is included in LabVIEW complete edition and professional development systems, not in the database. So, as you think, you do not have some of the elements necessary for the execution of this VI.

  Best regards

  David

  NISW

• Cannot display the properties of the desktop printer

  I have Windows 7 SP1 and Office 2007.

  I just bought a new HP Officejet Pro 276dw.  Installation was fine and I can print from all Office applications.  What I can't do though, is change the printing of any of the applications properties.

  I click the icon 'Print' (or ctrl + P) and the dialog box opens.  Can I change the number of copies, etc., but if I click on properties of the application (Word, Excel etc.) "freezing".

  If I try to close I get the message that a dialog box is open (it is not)

  The only way I can close the program must force via the Task Manager.

  I also found that if I click on seek a printer (even if it is displayed) I get The Active Directory Domain Services is currently unavailable.

  I can access the printer properties via the HP desktop icon, but it's very slow.

  Connection is made by residential wireless Group, but I also tried a usb connection and the result is the same.

  My Epson previous (a deceased) worked very well and no problems to access the properties.

  Help all very warmly received.

  Thank you

  Pls check:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/HPNetworkcommunicator-exe-we-need-a-solution-now/TD-p/1051357

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/HP-network-software-causing-slow-computer-need-help/TD-p/2621721

  Some of the suggestion, it might help (such as disabling function scanning office etc.). He is continually questioning and interrogation of the registry that might be causing delays.

• Internet Explorer cannot display the Web page - trying to restore as soon as possible a system restore point

  I get Internet Explorer cannot display the webpage message on my cell phone.

  I can get my desktop to connect to the internet, so it is not an ISP issue.  The laptop can see the router so it's not the question.

  I ran the network diagnostic and that did nothing.  I call my ISP helpdesk and they said it was a known issue with Vista after last update.  Therefore, they suggested that I tried to do a system restore to an earlier point.

  I tried to do this, but the system comes back and says that he did not work properly and gives an error unspecified as to why it did not work.

  Was the ISP Helpdesk right what I try next?

  Thank you

  Mark

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• When my friend l. a automatic updates for Windows Vista, it can no longer browse the web, well connected (as evidenced by Skype and diagnostics) the message "internet explore cannot display the page" coming up. Is there a way to fix this?

  Explore cannot display the page
  Vista updates
  Restart

  Hello

  Welcome to Microsoft Windows Vista Forums.

  I suggest you follow these steps:

  Method 1: See if you can view another Web page

  To do this, follow these steps:

  Start Internet Explorer.

  In the top of the browser address bar, enter one of the following addresses:

  http://www.Microsoft.com

  http://www.MSN.com

  http://support.Microsoft.com

  If you do not receive a similar error message after entering one of these addresses in the address bar, contact the owner of the Web site where you see the problem. The website is maybe temporarily unavailable or other problems.
   
  If you receive the same error message, go to the next method.

  Method 2: Run the Network Diagnostics tool in Internet Explorer

  To do this, follow these steps:

  Start Internet Explorer, and then try to access the Web page that displays the error message.

  On the page that displays an Internet Explorer error message, click diagnose connection problems . The Network Diagnostics tool will run. When the tool has finished, it will notify if you one of the following results:

  He was unable to find a problem.

  It has detected a problem. In addition, the tool will provide guidance on the next steps to take to resolve the problem.

  Note Users of Internet Explorer 6, click on detect network settings

  Click IP address , and note the IP address. You may have to it for future troubleshooting.

  Follow the steps in the Network Diagnostics tool to fix any connection problems.

  Start Internet Explorer.

  If you receive the same error message, go to the next method.

  Method 3: Use the delete browsing history

  If resetting the modem or the router has not resolved the problem, delete your browsing history might help. Follow these steps to delete your temporary Internet files, history and form data:

  Internet Explore 7

  Start Internet Explorer.

  On the Tools menu, click delete browsing history .

  Select the check box next to Temporary Internet files .

  Select the check box next to the history .

  Select the check box next to form data .

  Select the check box next to Cookies .

  At the bottom of the window, click delete .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  Internet Explorer 6

  Start Internet Explorer.

  On the Tools menu, click Internet Options .

  In the Temporary Internet files section, click delete files and then click to select the text box delete all offline content , and then click OK .

  In the history section, click clear history , and then click Yes .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  If you receive the same error message, go to the next method.

  Method 4: Use the Internet Explorer (No Add-ons) mode

  To do this, click Start , point to programs , point to Accessories , point to System Tools and then click Internet Explorer (No Add-ons) .

  Note The Internet Explorer (No Add-ons) mode is only available for Internet Explorer 7 and Internet Explorer 8.

  If this resolves the problem, follow these steps to isolate the browser add-on that is causing the problem:

  Click Tools and then click Internet Options .

  Click on the programs tab, and then click Manage Add-ons .

  Click an add-on in the name list, and then click disable .

  Repeat step 3 until you identify the add-on that is causing the problem.

  If the methods in the "Resolution" section General did not resolve your issue, you can try to use the methods in the "Advanced Troubleshooting" section If you are not comfortable with advanced troubleshooting, you can ask for help or contact support. For information about how to contact support, please visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/OAS/default.aspx?PRID=12357

  For more information follow the link below:

  http://support.Microsoft.com/kb/956196

  Hope this information is helpful

  Suresh G

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message "the website has encountered a problem and cannot display the page" when you try to install Windows XP SP3 update

  Original title: cannot use Windows Update to install Windows XP SP3

  I have done a complete reinstallation of Windows XP Pro from the original disc and managed to update to SP2.  However, when I tried to upgrade to SP3, I got an error that "the site has encountered a problem and cannot display the page.  I tried all the suggested fixes that I can find.

  During the last attempt, I discovered that several dll is missing.  Here's the msxml6.dll, wups2.dll, c:\windows\system32\wucltux.dll and c:\windows\system32\wuwebv.dll.  If they are critical, where can I find them, and how do I get support.

  In addition, mshtml.dll is available, but the DllRegisterServer could not find an entry point.  Is this critical?

  In any case, I still can I install Microsoft Update or download/install SP3.

  The computer is an IBM R50e laptop.

  Thanks for any help you can give.

  Try to run this tool to windows update. This will help to re-register the dll

  After its done. try again and do the update

  hope this helps

• After the removal of the malware "IE cannot display the webpage" - a user only

  After removing various malware with Symantec Endpoint Protection 11, MalwareBytes 1.46 and the Microsoft Malicious Software Removal Tool, the user who received the malware (all detected instances are found on their profile or in the system restore points) can not access all the Web sites with IE 7:

  "IE cannot display the webpage."

  The administrator account, or another standard account have the problem.

  I tried to open IE with 'no Add-ons' when you are connected to the consumer - same result.

  I have reset the Internet Explorer settings on the tab 'Advanced' Internet Explorer (inetcpl.cpl) - same result.

  Once more, the other two users can access Internet without problem.

  The 'user' can access the network otherwise - e-mail, drives mapped to the server, etc...

  One option: delete and re-create the profile of the user in question.

  But before resorting to that, is there another option?

  If I deleted Internet Explorer components in his profile, would they be recreated (correctly)?

  System Restore is not an option, because the troubleshooting procedure indicated that we should delete because they could just bring back the malware. And indeed, the malware has been detected in several snapshots.

  Have you tried to double check the proxy in Internet Explorer?

  Try going to the Internet Option-> setting connection and LAN, check the setting and be sure to correctly configure other users.

  You can also try to contact Symantec Support for more help with this problem.

• Internet Explore cannot display the page

  Hi all

  I m new to this and I need a little help that one when I connect to a Web page, he says internet explore cannot display the page. Any ideas how I can fix this problem? Be grateful for any help.
  Thank you all.

  First question;
  Haven't you set up the modem or the router correctly?

  Maybe your connection to the ISP (Internet service provider) was not set properly and so you are not able to connect to internet!

  Have you tried to connect to the internet with other computers?

  Reading your post I n t think that there is something wrong with the laptop

• Why teststand cannot display the ASCII character which number up to 128?

  Hi all

  I encountered a problem on an application for ASCII characters, why teststand cannot display the ASCII character which number up to 128?

  For example: an expression Local.xx = Chr (164).

  XX--> chain, can't do the correct string.

  An idea for this?

  OS: WinXP, SP1 Teststand2012.

  Thank you very much.

  TestStand uses encodings multibyte code page, that you have defined for the operating system-based. If you are using a code page that requires multibyte characters, you should also make sure that you have the Options of Station-> location-> parameter Regcognize multi-byte characters is enabled.

  On Windows 7, at least, the code page of the operating system setting is located in the control panel "Region and language" in the "Administration" tab where it says "language for non-Unicode programs".

  Hope this helps,

  -Doug

• HP laptop Pavilion G6 Windows 8 64-bit says cannot display the web page

  Windows Mobile 8 HP Pavilion G6 64-bit it says its connected to network & has internet access but when I try to access it repeat myself"cannot display the webpage" Ive checked all the cables, modem, router and restarted to refresh the signal without success. Called my service providerCox all troubleshooting can be done via phone again once nothing. Cox thought it was the modem so they sent a technician to replace it with a new one and still nothing. However I have no problem with my older Acer laptop, it must be the Hp laptop that has the problem. It just stopped working suddenly. Fine went looking for something and when I came back it just started doing this. What could be wrong? This is not only about a year old and only 1 user "" I use it for school, so I'm very cautious with it never dropped or spilled something on it. I don't even take it. He remains at home on the desktop. At McAfee with all updates except windows 8.1. Help!

  Hi Help_LynnsHP,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g7-1263nr Notebook and not being is not able to connect to the Internet. You have stated that you have McAfee, which is a firewall protection and or viruses. Have you tried disabling McAfee? Have you tried another browser? Here is a link to show you how do to troubleshoot Internet Explorer for Windows 8. You could try a System Restore.

  System Restore can restore settings that do not allow you to connect to the Internet.

  I hope this helps.

  Thank you.

• Error - because of unidentified problem, Windows cannot display the firewall settings

  Original title: Firewall Windows are not accessible to stop?

  Recently installed MSE.  Now, I can't launch Samsung Allshare to view files on the Samsung TV.  Firewall Windows is not accessible to stop temporarily so that Allshare can run.  All that is shown is "Because of problem not identified, Windows cannot display the firewall settings."  It seems that MSE has hidden and I can't determine how to communicate with them without going through the process of uninstalling and re-installing.

  Hello

  1 Windows operating system you are using?

  2. when exactly you get the error message?

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  If the problem is not resolved, please provide more information to help you best.

• Cannot display the error using Netflix page in Windows Media Center

  Hello I use Windows Vista Home Premium and Windows Media Center. I watched titles on Netflix in the past successfully in Windows Media Center, but today I get this error when I click to play a title:

  Cannot display the page. Windows Media Center cannot open the page.  Contact technical support for the program.

  And so here I am.

  I see all of the titles on my queue when I click on the Netflix icon, so obviously I am connected and connect, but cannot actually look at all the titles.

  Thanks for your help

  What is the error you get when you try to watch Netflix from the browser?
  What browser do you use?

  Go to start, all programs, Microsoft Silverlight and open Microsoft Silverlight.

  The tab of the Configuration window About, let us know which Version you have installed.
  Go to the Read tab, and then make sure that the enabled for playback of content protected.
  Then go to the Application Storage tab, select the Netflix web site from the list and then click on Remove to remove it. There may be more than one listed Netflix website, for each of them.

  After the changes, try once again, Netflix in Media Center and browser.

  You can also try reinstalling Silverlight by going to start, Control Panel, uninstall a program, select Microsoft Silverlight, and then click on uninstall and cross the guests. After uninstalling to joinhttp://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx and reinstall Silverlight.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code: 0X80072EFF (cannot display the Web page)

  My pc is no longer updates windows, nor do an update error code manual 0x80072eff that my pc is proteceted by full protection of Virgin Media and analysis of viruses etc. See the there are no problem I get message internet Explorer cannot display this webpage.  When I try to update via the web site address microst update I get the following message:

  [Error number: 0x80072EFF]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  George,

  0x80072EFF = ERROR_INTERNET_CONNECTION_Reset

  Reading * carefully *-not just browse the page and start following the steps.

  You may encounter temporary connection Errors when you use Windows Update

  -or-

  Microsoft Update to install updates:

  http://support.Microsoft.com/kb/836941

• error code: 0 x 80070002: MS updates__The site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  Hello

  Look in Control Panel - updates of Windows to see what is the KB and post it here. You can indeed
  There no need and do a right click on it and HIDE it. Let us know what is the update, so that we can
  help advise.

  Also, if you don't need it you can try to download it here.

  Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

  If you need to fix the error:

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Or - these two (above and below must be the same)

  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents:

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  missing volume control

  volume control was gone. I tried to go into my control panel to use it, but I get an error that says:

  "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  I have lost my Windows XP disc in a move and can't reinstall the file to a disk, how to fix this?

  When you use certain features sounds and Audio devices, you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

  It seems that the c:\windows\system32\sndvol32.exe file is missing.

  This may occur if your antivirus/antimalware application thinks the file is suspicious and quarantines (effectively delete) the file.  You can replace the missing file with a backup copy of the file that is in another folder on your system.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Assuming that Windows is installed on your C drive...

  We know that XP keeps copies of critical system files in the following folder:

  c:\Windows\System32\dllcache

  Using the Explorer, search for or navigate to the following folder:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe file, right-click, choose copy (it copies the file to the Windows Clipboard).

  If your Solution Explorer settings are not set to display file extensions, you will see only a file called 'sndvol32' which has an icon that looks like to the volume control slider (this is the file you need).

  If the file is missing in the dllcache folder, look for a copy of the file in this folder:

  c:\windows\ServicePackFiles\i386

  Browsing from a level in the following folder:

  c:\Windows\System32

  Right-click on an empty area in the window of c:\windows\system32 and choose Paste to paste in the missing file where it belongs.

  Answered in the affirmative if invited to replace the existing file.

  Now try your features sounds and Audio devices.

  Note that run sfc/scannow will not replace the missing file because it is not this that sfc/scannow does.