C - series endpoints and the SRV record

Similar Questions

• connected as long as User1 I can only access the srv record (Explorer) - execute / run as he is denied (the path not found or insufficient rights)

  Original title: denied enforcement program

  Configuration:
  -Win server 2003 standard (in the Working Group)
  -Portable Acer Aspire 5100, Windowx XP Home Edition sp3

  Problem:
  On laptop, there are 3 users: administrator (administrators), (power user) User1 and User2 (user).
  Logged on as administrator or User2 I can access the server disk, run the executable SRV drive etc, but connected as
  User1, I can only access the srv record (Explorer) - execute / run as it is denied (the path not found or)
  insufficient rights). The same phenomenon occurs even if User1 receives administrator rights.
  On the server side there is no restriction or limitation to User1 (because it's in the group, where
  any member of this group (also User2) has no problem). Logging as User1 on others
  PC there is no problem.
  Grateful for any suggestions / help.
  Marjan

  Hello

  Try to take possession of the file or program and check.

• My MSN account was blocked and the other recorded with her email address is no longer active so I can't get a verification code.

  My msn account was blocked and the other recorded with her email address is no longer active so I can't get a verification code. What should I do?

  Hi Harryjenkins,

  I suggest you to contact MSN support for assistance on this issue:

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  You can also visit the site mentioned below and check if it helps:

  http://windowslivehelp.com/solution.aspx?SolutionID=283b059b-d26d-41f9-ae3d-03a07afcb4ad

   

  I hope this helps.

• How to save a calendar I created with the photo and the dates recorded on separate pages?

  How to save a calendar I created in photoshop with the photo and the dates recorded in the form of two separate pages?  When I save in pdf or jpeg, they are automatically save 1 pg with dates and photos on a single page.  This is causing problems when I print.

  Hi there, in which case your printer is not very large, you can also trim down the two versions and print them as separate documents.

  (1) create a guide where you want to split the pages by clicking on the rule (hit control R if they are not displayed) and dragging to the desired location.

  Create the Guide to make it so be precise in the way which divide you your page, and so that no part of the image will be repeated or lost.

  

  (2) select the Cropping tool and adjust the area of culture at half top of your agenda, using the guide you have just made to align with the right place. Press return to complete the harvest.

  

  (3) go in file > save as the. Name the file something like calendar_top and select the desired file format. Press "Save".

  

  (4) once you return to your calendar file, go to the history Panel and select 'Guide to flirting This will bring you to step before you cropped the image.

  

  

  (5) repeat the steps as before to the bottom half of the schedule, once more, using the guide to help you make your growing area.

  

  

  

  Then you would just print each of the two pages individually. The images does not appear in a single document, but if you have Acrobat you could combine the files.

  I hope this helps!

• Format the first and the last record of query result

  Hello
  I have the following query
  
  < tt > select 1 seq, "This is the first record" data from dual union of all the
  Select 2, 'Data ' | tNom tab Union all
  Select 3, "It was last last record" double
  order by 1 < /tt >
  
  When I have the coil this summary to a listfile with col seq noprint option I get:
  
  This is the first record
  Data MLA_ACCESS_LIST
  Data MLA_APPLICATIONS
  Data MLA_VPD_PCK
  Data MLA_VPD_TABLES
  It was the last last record
  
  But I want to:
  
  It's first record MLA_ACCESS_LIST
  Data MLA_APPLICATIONS
  Data MLA_VPD_PCK
  MLA_VPD_TABLES it was save finally last record
  
  I tried with 1 statement with the use of lead and lag, because first and last record stand the other result record. But I get ORA-30484: lack of specification of the window for this function
  
  Is this possible with 1 statement or am I've sentenced to modify the results by myself?
  
  Thank you Auke

  Select row_number() case above (tNom control)
  When 1 then 'it's the first record
  end | tNom |
  -case row_number() over (order by desc tNom)
  When 1 then 'it was the last record. "
  end
  tab
  order by tNom

  HTH

• Series T and the new piece of Intel i7

  I like my laptop T series and I want to get a new one, but I'll wait until the new i7 chip is available. I have this laptop for 5 years now and it still works well, but it's getting a little slower so I thought I would upgrade. See how long I like to keep my machines I want to ensure I get the last chip. Do you know when or if you plan to move to the new fastest chip?

  New series spread since January/February. No idea if it will be i7.

  I bought a T400 with a P8800 with discounts that Lenovo is running and a 20% reduction recently and it is good. I added an SSD drive and makes the biggest difference.  I would ask enhanced before the new i7 graphics if I had to make the request (thr ATI 3400 line is 3 generations ago).

• What is the difference between a Apple Watch Series II and the Nike Apple Watch?

  I am interested in buying an Apple Watch, but I don't really understand what are the difference between the two.

  Hello

  Information about the models of series 2 Apple Watch (including Apple Watch Nike +) are available here:

  https://www.Apple.com/watch/

• Will I lose my google account or microsoft word or email and the email records if I reset firefox?

  Increase the grip on my firefox ("not responding" sometimes "the script is not responding"). Last night the mozilla would not respond to my email, so I opted to close the session. What a mistake. I lost all my email, some of them, business correspondence. Will I lose my Google account, e-mail and files written or my program Microsoft Word or Internet Explorer if I "reset"? I'll wait for a response before as I have "reset". Thank you for your service. Sincerely.

  This support article describes what refresh: Refresh Firefox – reset settings and Add-ons.

  But to answer your specific questions:

  I'm going to lose my...

  • Google account: No. If Firefox don't forget your Google password, you can log into your account and save it again.
  • E-mail: No. your email is not stored in Firefox, it is either stored on the e-mail service provider's website or a separate e-mail program, or both.
  • writing files: I'm not sure what this is. If you are using an add-on to create/save these files, then it is possible that the files will be gone after a refresh because the data associated with the modules are removed. However, if you have created these files in any other way, they should not be affected.
  • Microsoft Word program: No.. A Firefox Refresh does not affect the Microsoft applications.
  • Internet Explorer: No.. A Firefox Refresh does not affect the Microsoft applications.

  I noticed that you mentioned a "Reset". Windows has a reset function. I'm only talking about Firefox built in refreshment and not resetting Windows.

• Change the wallpaper off the admin account and the background recording does not

  Hello

  I'm having a problem with my background. Whenever I try to put a picture on my computer as background will not be set that image as it is, and when I put a picture of the internet as a background it will fix but don't stay once I restart the computer. This is the case EVERY TIME.

  After seeing this happen several times I went to control panel > appearance and personalization > change wallpaper. What I get on this page is a simple line, "this feature has been disabled, please contact your administrator." The problem is I AM the administrator and I have never changed the parameters of the Office to act like that, and I certainly never turn off any of the display settings.

  I scoured these forums and I've seen people who have similar problems (but not admin issues I'm having and not the problem with the setting of a local image) and have tried some of the solutions, including going in the ease of access settings > make computer easier to see and to erase the settings is unchecked.

  Help, please!

  All the solutions I am about to propose involve not to change the registry. Since it is to change the registry I recommend that you first create a point in http://www.howtogeek.com/howto/windows-vista/create-a-restore-point-for-windows-vistas-system-restore/ restoration system AND back up the registry as follows: http://www.adamsdvds.co.uk/tutorials/vista/regedit/backup.php.  I also want to warn to do at your own risk and peril - I have not tried these procedures myself, so I can't speak to their effectiveness or what other impact that may lead to changes.  But if you do the safety precautions backup two above, you should be able to recover in case this does not work or something you want starts to occur.  The decision (and risk) is your enttirely.

  Here is an article with a possible solution: http://www.pchell.com/support/desktopwallpaper.shtml.

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Here's another registry solution that I found in a forum:

  Remove after your system using Regedit registry entry. Disconnect and reconnect.

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "Wallpaper"=""

  You should be able to change your background now.

  ===================================================================================================================

  Here's yet another article on how to solve the problem with yet another type of editing the registry: http://www.tech-pro.net/how-to-change-desktop-wallpaper.html.

  I hope that one of these options help.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What happened to my outlook contacts and the old records of e-mail? I installed windows 7 and poof, they went?

  None

  Hi a user angry windows 7.

  Thanks for posting. Your Outlook Express file is still in the computer. Click Start > in Serach files and folders type *.dbx (if outlook express) *.pst (if outlook). Allows to search and it should shoot to the top of your email.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• VCSE and SRV records

  Hello world

  I have a general question about the SRV records and just need a bit of clarification. I have a client who has registered a domain for their express VCS, (tp.example.com). When I do a dns lookup it brings back the correct public ip address of the vcse. Now, I'll be confuring this system few however I don't know anything about SRV records.

  What I should allow the client to pass the SRV records relevant to their ISP for their external dns host?

  The public domain of customers is also identical to their internal domain. Im guessing the correct SRV records must be added to their server DNS internal too?

  Thanks for your help

  PS Si there is a good guide on adding files, srv etc then ide grateful if you could send me the link. Thanks again

  As we do not know your deployment it's hard to say, as if you have a cluster internally

  you use SRV records to sign up customers to allow failover. But who would most likely be

  some additional DNS entries and not necessarily the same as outside.

  If the systems are registered in their own country, they can work very well with no SRV record for the video domain.

  For external connectivity SRV records are more important.

  If you have a provider maintains the entries external DNS is the question put in place

  the SRV records.

  Please remember useful frequency responses and identify useful or correct answers.

• VCS-E SRV Records for several regions of the

  I have a region of production with a cluster of 2 highways and a test with one Highway area.

  Since I've implemented the first test area, I SRV records in place for Highway test:

  Here is an example of 1...

  _sip._tcp.example.com. 86400 IN SRV 10 10 5060 testvcsx.example.com

  How do I set up the SRV records for the production cluster using the same domain (example.com) but still be able to separate my production and test records, call the traffic, etc.?

  Hi André,.

  somehow, he must distinguish between prod and test platform.

  I would say to leave the field of prod to be like (referring to your example) example.com and trying to be test.example.com

  The answer DNS SRV is a recordset in the format:

  _ service. _ Protocol... TTL class SRV priority weight Port target

  When the target is a record setting the destination and for a cluster, it may be FULL of the cluster domain name.

  so if you have a cluster as prod and autonomous as a test, you can implement it like this:

  _sip._tcp.example.com. 86400 IN SRV 10 10 5060 vcscluster.example.com

  and you test domain is resolved by:

  _sip._tcp.test.example.com. 86400 IN SRV 10 10 5060 testvcsx.test.example.com

  Best regards, Ahmad

• Where is the sound recorder small application and notes on Z2?

  any of you have an idea where it is?

  I've got my xperia Z this apps but on Z2, I do not find

  @dm841

  Can u download the apks of notes and the second recorder?
  I don't have them either.

  .402 TW version

  Update: ok, found the note, here u go guys

  http://docs.Google.com/file/d/0B2ONZFOkl3m7bUh0RVF5MjBETDQ/edit

  Install it as a regular application.

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• Question on DNS entries for the grouping and the call

  Hey all,.

  We test a bunch of highway that has been placed in its own subdomian DNS (for example)

  cluster.Domaine.com

  With DNS entries:

  SRV

  _sips._tcp.cluster.domain.com. 86400 IN SRV 5061 1 1 Expressway1.cluster.domain.com.

  _sips._tcp.cluster.domain.com. 86400 IN SRV 5061 1 1 Expressway2.cluster.domain.com.

  _sip._tcp.cluster.domain.com. 86400 IN SRV 1 1 5060 Expressway1.cluster.domain.com.

  _sip._tcp.cluster.domain.com. 86400 IN SRV 1 1 5060 Expressway2.cluster.domain.com.

  _h323ls._udp.cluster.domain.com. 86400 IN SRV 1 1 1719 Expressway1.cluster.domain.com.

  _h323ls._udp.cluster.domain.com. 86400 IN SRV 1 1 1719 Expressway2.cluster.domain.com.

  _h323cs._tcp.cluster.domain.com. 86400 IN SRV 1 1 1720 Expressway1.cluster.domain.com.

  _h323cs._tcp.cluster.domain.com. 86400 IN SRV 1 1 1720 Expressway2.cluster.domain.com.

  _h323rs._udp.cluster.domain.com. 86400 IN SRV 1 1 1719 Expressway1.cluster.domain.com.

  _h323rs._udp.clusterdomain.com. 86400 IN SRV 1 1 1719 Expressway2.cluster.domain.com.

  A

  Expressway1.cluster.domain.com. IN a x.x.x.x (address IP Expressway1)

  Expressway2.cluster.domain.com. IN a x.x.x.x (address IP of Expressway2)

  However, I would actual calls placed to the root domain

  domain.com

  But with these entries DNS pointing to the subdomain of cluster, or I point to the individual counterparts of the cluster (see above). My feeling is that what I should do to the cluster so I need update DNS entries for the main domain if the peer of the cluster changes, such as:

  SRV

  _sips._tcp.domain.com. Cluster.Domaine.com IN SRV 0 0 5061 3600.

  _sip._tcp.domain.com. Cluster.Domaine.com IN SRV 0 0 5060 3600.

  But is this correct?

  Post edited by: Chris Swinney

  Comment added to records showing that they point to

  Hi Chris, how are you?

  If I remember correct SRV RFC which would be an error because no recursive search of srv would get,

  the address at the end of the srv record must be an a record (so also no CNAME).

  In your scenario, you can use:

  _sips._tcp.domain.com. 86400 IN SRV 5061 1 1 Expressway1.cluster.domain.com.

  _sips._tcp.domain.com. 86400 IN SRV 5061 1 1 Expressway2.cluster.domain.com.

  _sip._tcp.domain.com. 86400 IN SRV 1 1 5060 Expressway1.cluster.domain.com.

  _sip._tcp.domain.com. 86400 IN SRV 1 1 5060 Expressway2.cluster.domain.com.

  _h323ls._udp.domain.com. 86400 IN SRV 1 1 1719 Expressway1.cluster.domain.com.

  _h323ls._udp.domain.com. 86400 IN SRV 1 1 1719 Expressway2.cluster.domain.com.

  _h323cs._tcp.domain.com. 86400 IN SRV 1 1 1720 Expressway1.cluster.domain.com.

  _h323cs._tcp.domain.com. 86400 IN SRV 1 1 1720 Expressway2.cluster.domain.com.

  _h323rs._udp.domain.com. 86400 IN SRV 1 1 1719 Expressway1.cluster.domain.com.

  _h323rs._udp.domain.com. 86400 IN SRV 1 1 1719 Expressway2.cluster.domain.com.

  h323cs and rs cannot be used (cs is if you dial the field directly without user @ from the beginning)

  RS is used for registration, most of the configurations that I saw live fine without it...

  BTW, if it is a copy paste, replace your alone there is an error in the last entry of rs, it lacks one. between the two

  cluster and field.

  Btw2, I would set a record also has to be cluster.domaine.com at least one of the VCS, it's

  very convenient for endpoints no or wrong to support srv records.