VCSE and SRV records

Similar Questions

• Question VCSE Bind9 Dns Srv record

  Hi all

  I recently put in place a solution of VCS Express in my area, but I need your help to solve my problem of dns.

  My infrastructure is:

  1 VCSE optional NIC for dmz 2 and natted with the public IP address

  VCSC lan subnet 1

  Everything works fine, covered call, record (Movi) from the outside, call SIP/h.323 IP or dns, interoperability... Everything is ok

  My question are dial endpoint not registered.

  When I call to outsite in:

  [email protected] / * /, working (I create a processing rule to convert the IP to the domain)

  [email protected] / * / work but the search rule failed in agreement with my search rule

  [email protected] / * / Is not no incomig call

  I suspect that there is a misconfiguration of the dns.
  We use servers DNS Bind9 as authoritative for our area

  I configured according to deployment guides, SRV records and has to point my public IP

  I try to question my DNS from the outside, nslookup and utility dig, query returns OK

  I do not know well Bind9 and I don't understand why calls are not received in the form [email protected] / * /

  I am attaching a sample of my DNS zone file

  $TTL 86400; 1 day
  @ IN SOA ns1.mydomain.com. root.mydomain.com.)
  2011072147; Series AAAAMMJJNN
  7200; Refresh every 2 hours
  7200; Try again every 2 hours
  7200; They expire after 2 hours
  14400); Minimum TTL of 4 hours

  IN NS ns1.mydomain.com.
  IN NS ns2.mydomain.com.
  IN NS ns3.mydomain.com.

  mydomain.com. IN NS ns1.mydomain.com.       "After you have created this entry, the call to [email protected] / * / began to operate.
  mydomain.com. IN A X.X.X.X
  ns1 IN A X.X.X.X
  NS2 IN A X.X.X.X
  NS3 IN A X.X.X.X
  vcse IN A X.X.X.X
  _h323cs._tcp.mydomain.com.                   86400 IN SRV 1720 10 10 vcse.mydomain.com.
  _h323ls._udp.mydomain.com.                   86400 IN SRV 10 10 1719 vcse.mydomain.com.
  _sip._tcp.mydomain.com.                      86400 IN SRV 10 10 5060 vcse.mydomain.com.
  _sip._udp.mydomain.com.                      86400 IN SRV 10 10 5060 vcse.mydomain.com.
  _sips._tcp.mydomain.com.                     vcse.mydomain.com 86400 IN SRV 10 10 5061.
  _sips._tls.mydomain.com.                     vcse.mydomain.com 86400 IN SRV 10 10 5061.
  _sip._tls.mydomain.com.                      vcse.mydomain.com 86400 IN SRV 10 10 5061.

  ; This article is for the test

  ; mydomain.com. NAPTR 50 50 "s" "SIP + D2T" "" _sips._tcp.mydomain.com.
  ; mydomain.com. NAPTR 90 50 "s" "SIP + D2T" "" _sip._tcp.mydomain.com.
  ; mydomain.com. NAPTR 100 50 "s" "SIP + D2U" "" _sip._udp.mydomain.com.

  any idea is appreciated!

  Sorry for my English

  Concerning

  Giorgio,

  Please check your PM it seems that you have a typo in your SRV records.

  -Andreas

• C - series endpoints and the SRV record

  We just put our two VCS clustered and set our end points to save with a domain name of cluster.  The SRV is setup and works great on our MXP units, but the series C do not search the DNS record and fail to register.  What is the difference between the process of lookkup between the units?

  xstat h323

  * s h.323 Gatekeeper status: rejected

  * s h.323 Gatekeeper address:

  * s h.323 Gatekeeper Port: 0

  * s h.323 Gatekeeper reason: "a DNS lookup failed.

  What are your SRV records for the cluster, you may have a misconfigured.

• connected as long as User1 I can only access the srv record (Explorer) - execute / run as he is denied (the path not found or insufficient rights)

  Original title: denied enforcement program

  Configuration:
  -Win server 2003 standard (in the Working Group)
  -Portable Acer Aspire 5100, Windowx XP Home Edition sp3

  Problem:
  On laptop, there are 3 users: administrator (administrators), (power user) User1 and User2 (user).
  Logged on as administrator or User2 I can access the server disk, run the executable SRV drive etc, but connected as
  User1, I can only access the srv record (Explorer) - execute / run as it is denied (the path not found or)
  insufficient rights). The same phenomenon occurs even if User1 receives administrator rights.
  On the server side there is no restriction or limitation to User1 (because it's in the group, where
  any member of this group (also User2) has no problem). Logging as User1 on others
  PC there is no problem.
  Grateful for any suggestions / help.
  Marjan

  Hello

  Try to take possession of the file or program and check.

• A & QUESTION SRV RECORD

  I have a real?

  Have a network of VCS X8.2.2 of two cluster control.

  I was running a three server cluster, but due to latency issues took the VCS3, I deleted from the cluster and makes it independent.

  I removed the intellectual property of the counterpart of cluster list also.  That was months ago.

  Problem is this morning when systems checking, I noticed that one of my VTC systems was recorded on the single VCS3 media... Problem is in the system in the H.323 call control settings, I have the SRV cluster name and not the IP address of the VCS3 yet he him?

  I don't want any system recorded in the autonomous VCS3 and want to keep the name of the SRV cluster in the area... ???  I changed the doorman affecting intellectual property SRV record and he also recorded for the VCS3...?

  What could be causing this to happen?  Also, the priority is set to one on all of the SRV records.

  VR

  Chet

  I suppose that you in fact removed the old SRV records and replaced by a new that has not listed of VCS - C3?

  If you want to ensure that no system is able to register with that specific VCS, define a strategy of 'Decline' record for the sub-area of default and all other Subzones, you might have on this VCS.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• VCS-E SRV Records for several regions of the

  I have a region of production with a cluster of 2 highways and a test with one Highway area.

  Since I've implemented the first test area, I SRV records in place for Highway test:

  Here is an example of 1...

  _sip._tcp.example.com. 86400 IN SRV 10 10 5060 testvcsx.example.com

  How do I set up the SRV records for the production cluster using the same domain (example.com) but still be able to separate my production and test records, call the traffic, etc.?

  Hi André,.

  somehow, he must distinguish between prod and test platform.

  I would say to leave the field of prod to be like (referring to your example) example.com and trying to be test.example.com

  The answer DNS SRV is a recordset in the format:

  _ service. _ Protocol... TTL class SRV priority weight Port target

  When the target is a record setting the destination and for a cluster, it may be FULL of the cluster domain name.

  so if you have a cluster as prod and autonomous as a test, you can implement it like this:

  _sip._tcp.example.com. 86400 IN SRV 10 10 5060 vcscluster.example.com

  and you test domain is resolved by:

  _sip._tcp.test.example.com. 86400 IN SRV 10 10 5060 testvcsx.test.example.com

  Best regards, Ahmad

• Question about components entering the SIP/h.323 and SRV

  We have our VCS - E put in place for entrants and outbout call to the internet.  We have an SRV record for SIP and H323 audience.

  The SRV record lists the SIP/h.323 services for ourdomain.com, redirecting to video.ourdomain.com.

  I have some problems however;

  When testing with a client of Polycom that does not work with SRV or that has a different implementation of it, we have to deal (alias) @video.ourdomain.com.

  When you use Cisco Jabber (free), it only works when you dial (alias) @ourdomain.com but don't touch our VCS-E at all when you dial (alias) @video.ourdomain.com.  We can compose (alias) @our-public-IP of Jabber OK.

  Cisco Jabber doesn't use regularly debriefed if SRV is not available?

  Optimally all would support SRV, I have to accept that some people that we connect will not support it and I would like to be able to give the same dial in URI to everyone.

  Do I need to register an SRV record for video.ourdomain.com (I don't know yet if we record SRV for subdomains)? Or if I want the same dial in details any material they use, I have to give @public-IP (aka)?

  Cisco 'free version' never took in charge a record search as far as I know.

  The only reason for which you can use on the version "on-prem" is because the VCS-E can be configured to do this, not the customer.

  To ignore completely the DNS and the support of all comers, you will indeed give [email protected] / * /-E_IP_address, that said, as far as H.323 goes you will get a few old systems or systems with the old firmware, Polycom Polycom and LifeSize that only support ip_address ##Alias - so a transformation should be put in place to allow these establishments.

  And Yes, you can configure an SRV for subdomains.

  /Jens

• VCS SRV records

  Hello

  I have a VCS server that I want the installer in the DMZ for dialing outside/inside URI, the domain name is the same as our domain registration of MEX, what SRV records name, I need to create local or DNS ISP and publish in DNS ISP so each time than other companies wants to do a videoconference toour internal users or TP endpoint they can reach.

  Thank you

  Question 1...

  Areas, Subzones and political service are not determined by where you place the VCS. As suggested earlier, VCS - e is placed in the DMZ. To find out how set up areas of the document that I have attached. But there are examples.

  Question 2.

  If the other company has a VCS-E which is accessible from the internet, all you need to do, is create a DNS zone and a search rule that says call not for my domain, send to DNS zone. Again the example is in the document that I sent you.

  If you want a direct connection to the company then you will need to create an area of neighbor and rule which will send all calls to this search field for this company.

• Motorway E overlap in srv records

  Hello

  In a design of the Express way, using a cluster of Highway MRA for registration and another cluster for B2B call (and jabberGuest).
  We use the domain name "example.com".
  This means that clients jabber and video endpoint use the URI as [email protected] / * / your registration through cluster MRA.
  If outside the appeals of a jabber client or a videoendpoint on the "example.com" domain call must pass through the pole B2B.
  Question:
  The sips 5061 SRV records must be made on the domain 'example.com' but where it should point the MRA cluster or Cluster B2B?

  Henry

  For ARM, you only need the SRV tip collab.  According to the Expressway Administrator's guide, it is said of SIP SRV record is not necessary for mobile and remove access.  The SIP SRV should point to your cluster B2B Expressway, for incoming calls.

• Why are some of my black and blue records?

  On the left of Thunderbird is a list of user accounts and of records. Some of them are blue and some are black. Why is this? What does take to activate an account or a folder to the dark blue?

  Blue indicates a new unread message. Once you open the folder to view the headers, it changes to "BOLD" black before I read the messages.

• iOS 9.2 cannot download the CNN app and voice recorder on iPhone 5 s

  I have a 5 iPhone with iOS 9.2 on it from now. Apple customer service had updated me to iOS to iOS 9.2 9.1 thought, it would solve this problem, but it didn't. I tried all day download the CNN app and voice recorder app on my phone. It will be partially download and then say ' cannot download this article, please try again later ' with the option 'Retry' or 'done '. No matter what are the options I've done, I still turn in this with CNN and recorder of the word and I installed the new iOS 9.2 software and reset the settings. And by doing all this, I managed to download a set of cards from the APP store and software updates on the handle of my time and my iMessage.

  Apple had no idea why this happens, do any of you?

  Given that I was able to download other software and updates, my account is ok, my password is ok until it could it be?

  Everyone knows about this problem?

  Thank you

  Martha

  The applications in question may be being replaced on the server. I have just wait and try again later. I don't know what dictaphone app you are talking about.

• How to acquire with NiScope at different sampling frequencies and lengths Records?

  I need to acquire the data of 2 channels of the NI PXI-5114 map two different sampling frequencies high, at the same time. Also, I put 2 different record length. Is this possible?

  I understand that 'Vertical' settings can be configured for individual chains because the function 'Vertical niScope Configure' has 'channels of entry with which we can assign the desired channel. But for horizontal settings such as "min sampling rate" and the record min length, I could not find such an option to specify the channel. Would it not common to both channels?

  I hope that the device is capable of simultaneous sampling and therefore channels can be configured individually to different sampling rate.

  Hi AJ_CS,

  Why do you have to be distinct from sampling frequencies on channels separated from the digitizer even?  What different sampling rate do you want?

  But for horizontal settings such as "min sampling rate" and the record min length, I could not find such an option to specify the channel. Would it not common to both channels?

  You do not have an option to configure the settings of hoirizontal on a channel by channel basis because this concept does not exist in the traditional sense of the use of a scope.  Compatible with the concept of IVI, an oscilloscope traditional benchtop will have only a button or a set of buttons for setting the parameters of synchronization of the unit.  There is therefore no horizontal configuration to separate channels on the scanners NOR.

  I hope that the device is capable of simultaneous sampling and therefore channels can be configured individually to different sampling rate.

  Similar to a traditional benchtop oscilloscpe, the device is capable of simultaneous sampling.  But as mentioned above, the channels can not be configured for different sampling frequencies high.

  However, you can ignore data that you think is not relevant.  For example, if you assign 100MS/s CH0 and CH1 to 50 MS/s, then you throw all other samples.

  Alternatively, you can use separate scanners (a channel on each digitizer) and configure them to taste at different rates.  You can set frequencies of sampling on scanners NOR separated and even synchronize them with TClk.

  -Andrew

• Webcams for video and audio recording

  Hi team,

  I'm new to Microsoft webcams and I am looking to buy a good webcam.  I have the following questions & requirements...

  (1) is the webcam (Microsoft Life Cam HD - 3000) capable of recording audio and video images over distances of 7-8 feet from the source for a period of at least 2 hours?

  (2) are the video and audio, free software or licensed from the webcam as the videos will be uploaded to youtube?  Also the audio must be of good quality.

  (3) I have a small budget for webcams is there any other non-Microsoft Life Cam HD webcams - 3000 Webcam that can do this?

  (4) which is the best MS webcam for video and audio recording that Microsoft offer?

  (5) I have a lenovo w520 (laptop) and a windows 7 (OS).  Microsoft webcams do work on this configuration?

  (6) are there service centers available in India (Bangalore) for the support of these products? Also is there warranty on the product.

  (7) do you need a tripod or stand to place these webcams on?

  Hello

  Thanks for posting the query on Microsoft Community. Sorry for the delay.

  If I understand correctly you want to buy a good quality with low budget webcam. I suggest you go through the link below to select and buy a webcam that works for you.

  With the help of a webcam:

  http://Windows.Microsoft.com/en-us/Windows7/using-webcam

  The Microsoft HD - 3000 cam Life is compatible with Windows 7. Check the link for more information below.

  http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Type=Hardware&Name=Microsoft+LifeCam+Cinema+HD+Webcam&ModelOrVersion=&Vendor=Microsoft&Locale=1033%2C2057%2C3081%2C4105%2C16393&LastSearchTerm=Microsoft%2BLife%2BCam%2BHD%2B-3000%

  2 b & BreadcrumbPath = Microsoft + life + Cam + HD + 3000 + & TempOsid = Windows + 7

  To install Microsoft Life Cam HD - 3000, you can check the link below.

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-cinema/H5D-00013#support

  If you have any further questions, contact the Hardware Support team.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• BlackBerry Smartphones Just accepts updates my Blackberry Desktop and all THE Photo and video recorded on the Media Manager went

  Hello! I just accepted updates my Blackberry Desktop includes all Blackberry Desktop manager treats me like a new. And freaked out as all THE Photo and video recorded on the old Media Manager Media Manager are worth more than 3 years gone-Its photos and videos that I have stored on the Blackberry Desktop that existed before the update

  Really freaked out because these photos are irrepalcable would appreciate advice thanks

  Hello

  Have you checked to see if the pictures are found in your Documents folder by browsing until then on your computer system?

  What version of the Desktop software update you? Select the [?] is the top right and select "on BlackBerry Desktop Software. Version 7.1.0. ? or 7.0.0. ? or 6.1.0. ?

• Do we need to purchase the license to upgrade the VCS, VCSe and TMS?

  Hello

  We need to get a new license when upgraded version of VCS, VCSe and TMS?

  Hi Kelvin,

  xxx. OVA files are package files to deploy the VCS on virtualize platforms.

  Release key are required to upgrade the VCS for major updates. for p. ex. upgrade of x 6 x 7 software version worm.

  However for improvements minor as x7.2 to x7.2.2 these are the released hotfix version or bux fixes release and you don't need a license for this upgrade.

  in any case if you your devices are less covered by valid contract you can get the license key anytime just contact cisco license team on "[email protected] / * /" and they should be able to provide the necessary license.

  Rgds

  Alok