c:windows\system32\dbghelp.dll.

Similar Questions

• "c:\windows\system32\dbghelp.dll" "not designed to run on windows or it contains an error.

  Original title: c:\windows\system32\dbghelp.dll

  In the few weeks whenever I turn on my computer, try to save a document in Notepad or listen to music on windows media player, I get this error message "bad image" which appears again about 5 times in a row until it disappears eventually.

  "c:\windows\system32\dbghelp.dll" "not designed to run on windows or it contains an error" he cites that< a="" lot,="" i="" don't="" know="" how="" to="" stop="" this...="">

  Another question is, apparently, that my Security Center is turned off, but when I try to turn it on, nothing happens - no windows/web page opens. The two are related?

  How can I fix these problems?

  Hi Pyrcia,

  1. you remember to make changes to the computer before this problem?

  Step 1:

  You can try to run a SFC scan to check all corrupted files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2: You can check the status of the Security Center service.

  a. Click Start, type services.msc in the search bar and press ENTER.

  Note: If UAC (User Account Control) window is prompted for permission to continue, please click on continue.

  b. double-click the Security Center service and switch to the general tab.

  c. change the startup type to automatic, and then click on apply.

  d. Click Start, and then click OK.

  Step 3:

  You can also check out the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer.

  Microsoft safety scanner

  Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.

  Hope this information is useful.

• Windows Media Player does not not error is... C:\windows\system32\dbghelp.dll

  tried to reinstall, restore, restore, deletion and microsoft fix what I can think

  Hello

  • What were the changes made before the problem occurred?
  • What is the exact error message that you receive?
  • This occurs only with Windows media player?
  You can view these methods:
  Method 1:

  You can try to run a SFC scan to check all corrupted files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  
  http://support.Microsoft.com/kb/929833

  Method 2:

  I recommend you perform the clean boot.

  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  You can also check out the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.

  Hope this information is useful.

• Since my last windows update, whenever I open firefox, I get an error message saying BAD IMAGE on the C:\windows\system32\WRusr.dll file. Can you help me?

  The message I get is:

  "C:\WINDOWS\SYSTEM32\WRusr.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your administrator or the provider of support software. »

  I can't open Mozilla firefox more. I tried reinstalling 3 times already.

  I have reintalled webroot and everything seems fine now.

• C:\Windows\System32\wship6.dll is not designed to run on Windows or it contains an error.

  I can't open windows live mail and other programs that also many installers will not work for this reason.

  I get the following error:

  wlmail.exe - incorrect Image

  C:\Windows\System32\wship6.dll is not designed to run on
  Windows or it contains an error. Try to install the program using the
  the original installation media or contact your system administrator or
  the Publisher of the software to support

  I had to click OK 4 or 5 times to make it go away

  Many installers will not work because of this.

  System information:

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD A6 - 3400 M APU with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5610
  Graphics card: AMD Radeon (TM) HD 6520 G, 512 MB
  Hard disks: C: Total - Mo 595354, Free - Mo 401604; Total D: - 14820 MB, free - 1647 MB; F: total - 99 MB, free - 89 MB; G: total - Mo 953867, Free - 877240 MB;
  Motherboard: Hewlett-Packard, 358B
  Antivirus: Norton Internet Security, updated and activated

  Here's what I did to remedy:

  I had to replace the \wship6.dll c:\windows\sysWOW64 file not the file c:\windows\system32\wship6.dll

  I had to start Windows Recovery Environment, load the command prompt and replace the file c:\windows\sysWOW64\wship6.dll to a system of work w7 (I used an iso oem and 7zip)

  ( 1 copy the file in a place should be on my boot drive (c :) in my case))

  2 . restart your computer , press and hold F8 as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you will need to start over; to do this, hold the Windows logon prompt appears, and then stop and restart your computer.

  3 . Select repair your computer and press enter.

  4 . Select the option for command line

  type 5 bcdedit | find "osdevice" (note that there is a space after bcdedit and | and also find) that will tell you what drive letter to use to access your startup drive (d: in my case)

  type 6 the drive letter followed by a: (d: in my case) and press enter , the guest must pass to < DriveLetter >: (in my case d:)

  type 7 copy < your place should be > wship6.dll windows\syswow64\wship.dll (replace < your place should be > with the full path to where you place the file) (note the space between the .dll and windows)

  If this does not work, you may need to replace syswow64 system32 in all the above instructions

• c:\windows\system32\fltlib.dll seems to be corrupted

  My C:\windows\system32\fltlib.dll seems to be corrupted. This prevents my Panda Antivirus to start a service and that the Panda.

  I spoke with tech support Panda as well, but we have not found a solution.
  Now I wonder, how can I retrieve the original dll-file and save it.

  Can I copy from another PC (not Toshiba) and it works on my laptop?
  I hate the idea of recovering the Vista set to its original.

  Please advice,
  ESA Viitala

  > Can I copy from another PC (not Toshiba) and it works on my laptop?
  Hmm don't think this would work I would recommend to set the operating system to start point of time using system restore point or to use the recovery disk to reinstall the OS on the laptop and the laptop back to factory settings.

• Satellite A300 - w c:\windows\system32\rpcnet.dll and rpcnet.exe recognized as Trojans

  Hello

  while I was scene analysis antivirus on the laptop Satellite A300-15 b, my software recognized w c:\windows\system32\rpcnet.dll and rpcnet.exe as Trojans and deleted. These files are essential?
  How can I get back them? If someone of you cannot answer, I'd appreciate any help.

  Hemoth

  What anti-virus software are you using and have you updated to the latest list of detection of virus/trojan?
  To retrieve these files, you can use the windows repair console, which can be entered by pressing the F8 key before the windows operating system starts.
  Will take you to a list where you repair or somehow mode called option.

  If this does not work, you can try using recovery media.

• RES://C:\Windows\system32\mmcndmgr.dll/views.htm (error not found)

  HI, I am unable to solve this help please me...

  RES://C:\Windows\system32\mmcndmgr.dll/views.htm (error not found)
  By these Services on the server are not begin in 2008r2

  
  (1) group policy

  (2) Service Control Manager

  (3) the Client DNS events

  (4) browser

  (5) Kerberos security

  All the above services do not solve & due to this FSMO roles are
  not work & unable repeated files.

  Please help me on this point, it's to create a big problem for me here.

  Hi Varun,

  I suggest that you post this question in the Windows Server 2008 support TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.

• Error C:\Windows\System32\MMDevApi.dll

  Original title: System change plots Microsoft Windows

  WHEN CONNECTING FROM THE TOP HAS A MESSAGE... Several problems with C:\Windows\System32\MMDevApi.dll...it, and I can't solve

  Can someone help me?

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  3. when exactly you get the error message?

  4. what you try to connect?

  I suggest you check out the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If the problem is not resolved, please provide more information to help you best.

• I can't in windows at all and a bad picture slui.exe message comes up saying that c:\windows\system32\rpcrtremot.dll is not designed to run on Windows. What is the devil?

  Computer went bad after several problems, but after that I tried to do a restore, went up the wrong at worst... start, computer can not go beyond error message saying Windows\system32\RpcRtRemote.dll... What is with all these DLLs in endangered or get damaged.

  Hi Hurigeorge,

  ·         You're able to boot in safe mode?

  ·         Since when are you facing this problem?

  ·         You did it last changes before the show?

  Method 1:

  Step 1: I suggest to start in safe mode, please see the articles below:

  What is safe mode?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: I recommend you perform the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Try the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope that helps!

• FreeCell stopped loading: 'no graphics device adapted not found' and c:\windows\system32\aticfx64.dll is not designed to...

  I got my video card to RMA and then all of a sudden, after I installed the latest drivers (ASUS EAH5970) I ge the messages:

  1 c:\windows\system32\aticfx64.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or support software provider.

  2. no suitable graphics devices found

  3. "unable to detect a supported video card" ("Dragon Age: Origins" when starting)

  All these games have been working well in advance.

  Hello!

  You can uninstall then re - install video drivers, using Windows Control Panel and the option of 'Programs and features' to uninstall the ATI video drivers, reboot and then install the latest drivers from here: http://support.amd.com/us/gpudownload/Pages/index.aspx

  Best Katy

• OK to remove c:\windows\system32\uiautomationcore.dll to solve the CTD of Flight Simulator?

  A large number of users of Microsoft Flight Simulator in Windows 7 seems to be having the same problem, which crashes to desktop. In the thread following the removal of c:\windows\system32\uiautomationcore.dll has been proposed as the "solution" to this problem: http://social.technet.microsoft.com/Forums/en-US/w7itproappcompat/thread/fb1808ff-92f0-478b-9826-f2ed6fbeae97

  Assuming that it is indeed the case, is it possible with impunity? (or at least with acceptable suffer, keep in mind that a lot of people have invested a lot of time and efford - and money - in Flight Simulator).

  You can rename it, and if you have any problems, then name again.
   
  Steve
   
  "PeterBDa" wrote in message News: 405ee0e1-30e8-4e61-a4a1-5ab2d7478cfc...

  No, the c:\windows\system32\uiautomationcore.dll is part of Windows and should not be deleted or modified.

  I appreciate it. However its seems that various people (many?) removed, and their system keeps going (and still works for Microsoft Flight Simulator), so this is appararently not essential. The consequence of not removing no seems to be not being able to use an application that you may have bought the computer to use in the first place. I hope that a response with a nuance more is possible.

• duplicates wuauclt.exe & c:\windows\system32\wuaueng.dll (need both?)

  Hello
  I am running xp pro sp3 with MSE (v. 1.77.1038.0). I had CATrust AV until a few weeks ago. I'm on a domain network. We have not required WU to run all the time.

  I have issues with wuauclt.exe slow down my computer. All of a sudden, I hear the beginning of the computer running through the process and everything slows down. (5 minutes to open an email of 5 KB)

  I * think * my problem is that there are 2 versions of wuauclt.exe & c:\windows\system32\wuaueng.dll on my computer. They appear as wuauclt.exe and wuauclt1.exe.  wuauclt1.exe and c:\windows\system32\wuaueng.dll files are version 5.8.0.2469.

  Running the MSE analysis does not turn to the top of any spyware. I tried just to remove the old version, but they appear immediately as if the registry grows this version instead.

  After reviewing the record, I see that everything related to Microsoft.Update.AutoUpdate has two entrances:
  That is to say
  HKEY_CLASSES_ROOT\Microsoft.update.AutoUpdate
  HKEY_CLASSES_ROOT\Microsoft.update.AutoUpdate.1

  Could this be the thing slow down my machine? If this is not the case, what would it be? If so how can I get rid of the duplicates offending (and shocking!)?
  Thank you
  Ian

  I can assure you that Windows uses only the wuauclt.exe file now and it is quite normal to find a copy of wuauclt1.exe in %windows%\System32 <=this> .

  It is quite normal to find wuauclt.exe in the Task Manager. Processes tab shortly after starting your computer and so he can be executed for 10 to 20 minutes later (especially if Microsoft Update [1] is your source of default update).

  That being said, the current automatic updates of running in the background has not such a detrimental effect on performance (e.g., 5 minutes to open an email 5 KB) when it is executed, unless the computer is low on resources (low power).

  See if the boot minimum technical troubleshooting help you nail that other background process could contribute to the slowdown.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  How do advanced clean boot troubleshooting in Windows XP
  http://support.Microsoft.com/kb/316434

  Need help? Start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xpperformance/threads

  ===================
  [1] "... What are the differences between the Windows updates and Microsoft Updates?

  "While Windows Update provides updates specifically for Windows, Microsoft Update expands the service to download and install updates for other software from Microsoft, such as Microsoft Office and Windows Live... »

  Source: http://www.microsoft.com/windows/downloads/windowsupdate/FAQ.mspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• c:\windows\system32\powrprof.dll has stopped working or has an error.

  I tried to open a session, but a popeed of message saying c:\windows\system32\powrprof.dll has stopped working or has an error. I'm not sure what this means or what past... I did not any changes to my computer lately.

  How can I fix?

  You forgot to specify what system you use, if it's Windows XP, Vista, Windows 7, or even Windows 98.

  Powrprof.dll library contains functions for Configuration of Microsoft Windows Power Management Tools.

  1. http://support.microsoft.com/kb/q188213/
  Error message: error loading Powrprof.dll

  For Windows 98

  2 powrprof.dll errors might indicate a registry problem problem, a virus or malware.

  If you are using Windows 98, suggest you only look at the possibility of a virus or malware problem.

  TaurArian [MVP] 2005-2010 - Update Services

• I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  Hello

  you are fully updated? This means that the module cannot be found, what you want to do when you get this error? error codes >?

  check the reports on the problems and solutions

  You can do a support ticket, follow the link

  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support

  Microsoft product support has some tools that will be useful and can help to find a solution

  have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!