c000021a corrupt boot file?

Similar Questions

• Corrupt boot drivers and XP NTFS file system

  The system event log shows that I have files corrupted ntfs and suggests also I have the drivers corrupt boot and MS says I should check and repair if necessary - but how do I do this?  There seems to be nothing in the knowledge base on this issue. I have also a no momentum for a service of IP security, but maybe it's just the result of corrupted file system and I will need to recheck once I fixed the underlying problem. Advice please?

  There is also a logon successful for 'Anonymous' on several occasions that may or may not indicate a virus, but may also be the result of damaged files - messy!

  Hello

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• system32\configuration\system or corrupted - boot problem

  I have a laptop, Inspiron 1525, with XP Home Edition.  I keept is message read, "" Windows didn't start because the folloing file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM "I tried the repair process, the F8 key, including" last good configuration, all to no known use.  Help, please

  Hello dutcchess
  I just down loaded this how to from microsoft

  When you try to start or restart your Windows XP-based computer, you may receive one of the following error messages:

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SOFTWARE

  Stop: c0000218 {Registry file failure} the registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or replacing

  System error: Lsass.exe
  When you try to update a password the return status indicates that the value provided as the current password is not correct.

  Guided Help to recover a corrupted registry that prevents Windows XP startup

  Guided Help is available to help recover a corrupted registry that prevents Windows XP startup. Guided Help can automatically perform the steps for you. Actions running this guided help can be undone after Guided Help is complete. To undo the actions running this Guided Help to restore corrupted registry files, start the Recovery Console, and then manually copy the Windows\Tmp\*.bak files in the Windows\System32\Config folder. Be sure to rename the files to remove the .bak extension. For more information about guided help, click on the number below to view the article in the Microsoft Knowledge Base: 915092 (http://support.microsoft.com/kb/915092/) Description of guided help for Microsoft Knowledge Base articles Requirements to install and to use this guided help You must be logged to Windows using an administrator account to install and to use this guided help. You must run Windows XP Home Edition, Windows XP Professional, Windows XP Media Center Edition or Windows XP Edition Tablet PC to install and to use this guided help. You must first download Guided Help. To start, click on the following link: Download Guided Help (http://support.microsoft.com/kb/307545/)

  Manual steps to recover a corrupted registry that prevents the start of the procedure that this article describes to Windows XP using System Restore and Recovery Console. This article lists also all required specific steps to ensure that the process is fully completed. When you have completed this procedure, the system returns to a state very close to the State until the problem occurred. If you have ever run NTBackup and completed a system state backup, you don't have to follow the procedures in parts two and three. You can go to part IV. First part in the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the System32\Config folder. When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.

  The full, first part, follow these steps:

  1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
  
  Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
• When the "Welcome" screen appears, press R to start the Recovery Console.
• If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
• When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
• At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
  MD tmp
  copy c:\windows\system32\config\system c:\windows\tmp\system.bak
  copy c:\windows\system32\config\software c:\windows\tmp\software.bak
  Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
  copy c:\windows\system32\config\security c:\windows\tmp\security.bak
  copy c:\windows\system32\config\default c:\windows\tmp\default.bak

  delete c:\windows\system32\config\system
  delete c:\windows\system32\config\software
  Delete c:\windows\system32\config\sam
  delete c:\windows\system32\config\security
  Delete c:\windows\system32\config\default

  Copy c:\windows\repair\system c:\windows\system32\config\system
  copy c:\windows\repair\software c:\windows\system32\config\software
  copy c:\windows\repair\sam c:\windows\system32\config\sam
  Copy c:\windows\repair\security c:\windows\system32\config\security
  Copy c:\windows\repair\default c:\windows\system32\config\default

• Type exit to quit the Recovery Console. Your computer will restart.

Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with case windows_folder If it is a different place.

If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

batch regcopy1.txt

With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use the batch command, you do not have to manually type as many commands. Second part to perform the procedure described in this section, you must be logged on as an administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

1. Click Start, click shut down (or click turn off computer), click restart, and then click OK (or click restart).
2. Press the F8 key.

   On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

1. Start Windows Explorer.
2. On the Tools menu, click folder options.
3. Click the view tab.
4. Under hidden files and folders, select Show hidden folders and files, and then click to clear the Hide protected (recommended) operating system files check box.
5. When appears in the dialog box confirming that you want to display these files, click Yes .
6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

   Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

   Note You may receive the following error message:

   C:\System Volume Information is not accessible. Access is denied.

   If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

   309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
8. Open a folder that was created not at the present time. You may need to click Details on the view menu to see when these folders were created. There may be one or more folders starting with "RP x under this folder." Here are the restore points.
9. Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
   C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
10. Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
    • _REGISTRY_USER_. DEFAULT
    • _REGISTRY_MACHINE_SECURITY
    • _REGISTRY_MACHINE_SOFTWARE
    • _REGISTRY_MACHINE_SYSTEM
    • _REGISTRY_MACHINE_SAM
11. Rename the files in the C:\Windows\Tmp folder as follows:
    • Rename _REGISTRY_USER_. DEFAULT DEFAULT
    • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
    • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
    • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
    • Rename _REGISTRY_MACHINE_SAM to SAM

These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

Part three in the third part, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

1. Start the Recovery Console.
2. At the command prompt, type the following lines, pressing ENTER after you type each line:
   del c:\windows\system32\config\sam

   del c:\windows\system32\config\security

   del c:\windows\system32\config\software

   del c:\windows\system32\config\default

   del c:\windows\system32\config\system

   copy c:\windows\tmp\software c:\windows\system32\config\software

   copy c:\windows\tmp\system c:\windows\system32\config\system

copy c:\windows\tmp\sam c:\windows\system32\config\sam

Copy c:\windows\tmp\security c:\windows\system32\config\security

Copy c:\windows\tmp\default c:\windows\system32\config\default

Note Some of these command lines may be wrapped for readability.

• Type exit to quit the Recovery Console. Restart the computer.

Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with case windows_folder If it is a different place.

If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

regcopy2.txt batch

Fourth part

1. Click Startand then click all programs.
2. Click on Accessories, then System Tools.
3. Click System Restore, and then click restore to a previous RestorePoint.
Back to top

REFERENCES

For more information about using the Recovery Console, click the n in the following article...
For more information about using the Recovery Console, click the numbers below to view the articles in the Microsoft Knowledge Base:
307654 (http://support.microsoft.com/kb/307654/) how to install and use the Recovery Console in Windows XP
216417 (http://support.microsoft.com/kb/216417/) how to install the Windows Recovery Console
240831 (http://support.microsoft.com/kb/240831/) how to copy files from the recovery on removable media Console
314058 (http://support.Microsoft.com/kb/314058/fr/) Description of the Windows XP Recovery Console
For more information about system restore, click on the numbers below to view the articles in the Microsoft Knowledge Base:
306084 (http://support.microsoft.com/kb/306084/) how to restore the operating system to a previous state in Windows XP
261716 (http://support.microsoft.com/kb/261716/) System Restore removes files during a restore procedure
For more information about the three likely causes of registry corruption and how to isolate, click on the number below to view the article in the Microsoft Knowledge Base:
822705 (http://support.microsoft.com/kb/822705/) for advanced users registry troubleshooting steps
Back to top
• Microsoft Windows XP Home Edition
• Microsoft Windows XP Professional
• Microsoft Windows XP Tablet PC Edition
• Microsoft Windows XP Media Center Edition

If this post can help solve your problem, please click the mark as answer check on this page THANKS AND GOOD LUCK

• After 13 updated both the system rebooted and now as he begins to install XP it autorestarts. It will not recover to the last known good config and delivers a message of corrupted config file.

  Any ideas?

  Thank you

  Frank

  You will share exactly what the message of the corrupt config file says?  My crystal ball takes off the second Wednesday of each month.
  If your system reboots continuously, the next time the system reboots, start tapping the F8 key until you see the menu Boot Options Advanced XP.  On the Advanced Boot Options menu, select:

  Disable the automatic restart in the event of system failure

  This will display the error message that you don't see when the system restarts.  This is what Windows is supposed to do when there a failure - it is supposed to automatically restart.  The error you see on the screen has your clues...

  If you do not see the menu Options start Advancded or you do not have to turn it off automatic restart on option system in the list of choices, you need to try again until you do.  Start typing the F8 key earlier and more frequently as your system begins to come alive.  If you miss the window of opportunity F8, you must try again.
  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)
  ?
  Most of the time (in recent memory) when there is a problem after installing Microsoft updates, the problem is because the computer was somehow afflicted before/when updates have been installed and updates simply bring to the surface a problem that was not evident before.
  If the last thing people remember is to install the updates from MS, it's am understandable reaction in some way involve updates for updating the post problems when things don't work properly afterwards and especially during the next reboot.
  Another reaction is to try to remember all of the updates you have installed and somehow uninstall the updates one of the XP Recovery Console until you find one who is 'responsible '.  Unless you noted all issues of update, it would be more difficult, but not impossible.  It is unlikely that practical or useful advice in most situations, but you can of course try it.
  Security updates sometimes holes patch XP and when security holes are patched (and XP is "tighter"), affliction can no longer do what is done, things to happen are no longer allowed to happen as a result of the strengthening of security, the system has now a new problem (especially when it initializes more) , and it seems that install updates broken system while in fact, it's just a coincidence.
  Another thing that can happen is that the Microsoft updates will change or update certain critical files on the XP system.  Depending on what your software antivirus or antimalware software is, these programs can interpret the new or updated files to day as being a threat or somehow infected and quarantine (effectively delete) files it thinks are wary.
  The next time you restart your system, you'll have some sort of a problem, or you do not start if the files are missing.  Once more, the problem is not with the updates, it's another condition on your system with your antivirus or antimalware programs you beautiful little (they could be aware of what like the new look of Microsoft files).
  You may have seen some or heard talk about some of these kinds of people, but not too intellectually stimulating general or scenarios of error after update:
  NTLDR is missing or corrupt, ntdetect.com is missing or damaged, ntoskrnl.exe is missing or damaged, hal.dll is missing or corrupt, etc.
  These types of errors are usually very easy to fix, but if you don't know what's happening, the temptation is to do a repair installation, or if none of these kinds of things are really necessary, completely reinstall your XP.  I have never done a system restore, a repair install or reinstalled XP in my life to solve any problem (but I did the process for practice).  These things are simply not options with me.
  Given that Microsoft sends many updates on the second Tuesday of each month (they call it "Patch Tuesday"), this means that the or to the second Wednesday of each month there is an increase of 'problems' in the field - in particular the types of problems "my computer does not start after you install the updates from Microsoft.  That day is also known as "exploit Wednesday".
  You can read about it here: http://en.wikipedia.org/wiki/Patch_Tuesday
  It is likely that if you have a problem like this or after the installation of MS updates, someone else has also had the same problem and understood what to do about it.  A problem here, is that no one knows what is your problem.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Table corrupt master files HELP!

  So, my computer would not start so I booted from the disc and ran a DSKCHK.

  It comes to whaf I'm back

  The type of the file system is NTFS.

  Volume label is the new operating system

  "Corrupt master file table. Windows will attempt to recover the master files of the disk table.

  Windows cannot retrieve the master file table. Abandoned CHKDSK. »

  I have a Dell Xps 1350 runnig Vista

  Please someone HELP

  Hello

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  http://knowledge.Seagate.com/articles/en_US/FAQ/201271en

  ________________________________

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and try to copy your data from the hard drive like that.

  http://Knoppix.NET/

  See you soon.

• Corrupted master file table

  By turning on the laptop computer Inspiron my son receives the message "checking file system on D the type of file system is NTFS volume lable in recovery, one of your disks needs to be checked for consistency.  You can cancel the disk check, but it is strongly recommended that you continue. Window to check the disc.  Corrupt master file table. Windows will try to recover the master files of the disk table.  Windows cannot retrieve the master file table.  The disk check abandoned. The computer will not beyond this point

  What this means, and it can be fixed.

  Hello

  Boot from the recovery disc or a DVD of Vista (maybe copy from a friend who are not protected against copying).

  Command prompt

  CHKDSK /f /r

  How to use the command prompt
  http://www.bleepingcomputer.com/tutorials/tutorial147.html

  From the DVD command prompt often works when it won't otherwise.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Startup error message: PXE - E53: no boot file name given

  I've been running Windows XP on a virtual disk on the Fusion 3.0.2 with Mac OS X (10.6.6) host for quite awhile without major problems. However, when you start the disk virtual this last time, during the boot, just after it displays the Client's MAC address and GUIDS, I get the following error message:

  PXE - E53: no boot file name given
  

  
  

  PXE - M0F: Exit Intel PXE ROM

  Then the following message appears:

  Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  I guess that he must breach since no file is listed?

  Also, during startup, before the above, I get a reminder message to install VMWare Tools. I installed VMWare Tools, I'm sure, so I don't know why that message is coming.

  I don't know why this happened. There was a few hard reboots due to accidents recently.

  I searched these forums for this problem. Of those that I looked, more have tried to install Windows and could not see their CD-ROM drive. I don't have this problem. I can see the CD-ROM drive and even tried to reinstall Windows. This does not work he said because he can't find a hard drive.

  Any help would be appreciated.

  HUMAN RESOURCES

  P.S. I am trying download Fusion 3.1.3 now, but because I have a bad internet connection (Overseas), it is not always successful.

  Let me repeat the first thing I said in this thread...

  "First things first, making a hard stop or forced to the host OS while running a Virtual Machine can destroy the virtual hard disk and should be avoided as much as possible.  Unfortunately sometimes have no way around it, and why it is imperative to have always current and complete all user data and stored backups out of the Virtual Machine itself and on the host volume where the Virtual Machine package resides.  Note: Don't rely on Time Machine for Virtual Machines as it is a known fact that Time Machine is not 100% reliable in all conditions of backup and restore of Virtual Machines and they should be excluded from Time Machine backups and must be manually backed up when the virtual machine is stopped from bee of in the guest operating system, not suspended and closed VMware Fusion. »

  Now, with that said and the fact that you have retrieved your user data, then I would like to delete the problematic Virtual Machine that has been corrupted by forced or hard stops and just start fresh as well as execution of the game plan appropriate to not having to go back into the process, you had to.

• Starup problems-, Manager of corrupt boot,.

  Hello

  I turn my laptop it starts up the toshiba screen and then get message, corrupt boot Manger, I don't have recovery discs and lost. Help, please.

  Jin

  There is not much to be done as:

  1 order [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] for money from Toshiba.
  2. get Windows disk to install it. and then get [drivers Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp].

• How can I start my computer when ive zip produced the startup boot file

  How can I start my hp ive filed zip the startup boot file and it cannot open it to start, whats my options now

  I have some compressed files and the boot of boot file was there and now it used or cannot open the compressed files to get started

• Corrupt CAB file

  I am trying to install Windows Media Player 11 and make me an error message saing I have insufficient disk space to Exchange files or have a corrupted .cab file.  I don't have a problem with low disk space, so I think it has to do with the CAB file.  Also I am not able to install other programs beside the media player and need to update my drivers.  I am running Windows XP Home Edition.
  It's the exact error I get installing Media Player
  "Extraction of file failed. It is probably caused by low memory (low disk space for swap files) or corrupted Cabinet file. »

  Navigate to the click on the right from my computer to the disc, and then select Properties tools.   Run scandisk and fix all errors.   Then run Defrag.

  Then, if the source of Media Player is a DVD: wash the disc with warm water with a drop of washing dishes hand liwuid. Rinse with plenty of hot water and dry with a clean, lint cloth. If this is fropm a file DL, re - download.

  Restart and try again.

  Tom

• Outlook Express - repair/restoration of corrupted DBX files

  Hello

  I recently lost a number of local folders in my Outlook Express (OE) I found in the store DBX. However OE does not read/open them very probably because they are corrupt. It is apparently a common problem.

  I searched and found a few tools that claim to repair/recover corrupted DBX and I tried three demo versions. None of them were able to repair corrupt DBX files. One of the tools has been honest enough to admit that some files may be irremediably, and he provided a full scan of the drive that found a number of lost/deleted messages, some of which were originally in the records the of OE that I had lost. Although no no trouble so far, no cost using the versions demo.

  A number of experts suggested a tool called DBXPRESS claiming to recover the corrupted DBX files. Unfortunately, no demo version is available as proof of effectiveness before buy you.

  Are repairable corrupted DBX files, as claimed by the softwar ecompanies and if so, how, and with what software?
  As it is a common and potentially disastrous problem, not Microsoft should be persuaded to provide a radical solution to avoid a manual tedious backup process.

  All views / advice is much appreciated.

  Concerning

  Paul

  Outlook Express is an e-mail and news client supplied with Internet Explorer. Outlook Express is a different application from MS Outlook. The two programs do not share a common code base, but share a common architectural philosophy. Outlook Express uses the Windows address book to store contact information and integrates tightly with it. Microsoft Internet Mail and News was a freeware e-mail and news client and ancestor of Outlook Express.

  The executable file of Outlook Express, msimn.exe, is a remnant of the era Internet Mail and News. Internet Mail and News managed only plain text and rich text email ( RTF), lack of HTML e-mail message.

  Outlook Express has been subject to a number of problems which can corrupt its files database, especially when the database increases volume due to the increase in number of stored emails and during compaction of the database.

  The dbx file Corruption can occur due to these reasons:

  1 MSIMN has caused an IPF in module Msoe.dll.

  2 MSIMN caused a page fault in module Msoe.dll at address.

  3 outlook Express could not be started. It cannot be installed correctly. Make sure that your disk is not full or that you're not out of memory.

  4 outlook Express could not be started because Msoe.dll could not be initialized. Outlook Express is not installed properly.

  Outlook Express stores e-mail messages in the databases that have a .dbx file extension. Each folder in Outlook Express (same subfolders) has a database that are associated with; so if you have 20 folders you have twenty databases. The databases have the same name files so the Inbox folder has a database called Inbox.dbx.

  In these cases over corruption is probably in the file "Folders.dbx". It's the main index more of the entirety of the record Store and without it, Outlook Express is unable to do anything, in this case, the only solution is to delete the file corrupted in the storage folder. This will allow Outlook Express to start and to build a new "Folders.dbx" by re-indexing of all the DBX files it finds in the storage folder.

  For lost information, follow these steps:

  1. recreate your e-mail folders hierarchy by dragging files in place in the list of folders. Note that any folder that you've created to group sub files but that does not itself contain messages will not appear in the list of the files and must be recreated.

  2 re - download the list of groups of discussion of each news account.

  3 reset your subscribed discussion groups and re-download the messages.

  4. set options on IMAP folder synchronization and newsgroup.

  5. modify a message rule that moves or copies the messages in folders other than the Inbox.

  Here are the steps from which you can return the loss of information. And if your information not recovered again then it could be a serious problem. In this case, go for the recovery software to recover your data from dbx files. I can send you a link that can surely help you recover your lost data. Try this link:

  Good bye.

• Question 1: Low virtual memory does that mean and how do I fix? Question 2: The corrupt system file that should not be removed. How do I correct?

  Question 1: what low virtual memory mean and how do I rectify.   I am invited this could change my access to some applications and the pc is very slow.

  Question 2: AVG pushes me that I have a corrupted system file, in a white space, I think, that should not be removed.  How do I rectify this?

  Uninstall AVG with tool for them to do it in safe mode.

  Reboot and install MSE.

  Without doubt, all problems solved. Let me know how it goes.

• corrupted system file, error: C\DOCUME ^ ^ 1\All Users Temp is damaged and unreadable chkdsk run

  original title: corrupted system file

  So play downloaded Games PC error appears constantly C\DOCUME ^ ^ 1\All Users Temp is damaged and unreadable chkdsk run. I continually run chkdsk but problem not solved. I am able to play the games but this message is boring and need help to repair

  Hello

  Let us clean the temp folder and check.
  Here's how:
  a. Click Start and type folder in the Run dialog box.
  b. press on enter and delete all the files in the folder.

  Also run Disk Cleanup. Reference:
  Description of the tool in Windows XP disk cleanup
  http://support.Microsoft.com/kb/310312

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Corrupted FAT file

  Help, please. I just got a 2 GB Fuze for Christmas and its been great. today when I turned it on, it says corrupted FAT file, plug it into the computer to fix. When I do, nothing happens. Costs of rocket, but does nothing to fix the prob.  Thank you

  Found a way to retrieve all THE data before formatting.  Years ago I bought Get Back Data (FAT 32) of http://www.runtime.org/data-recovery-downloads.htm

  I have installed the software, robbed the disk and after reading and diganosed everything (about 25 minutes), I managed to copy on my local disk.

  In the case where someone crosses it, it worked great.

  Thanks for everyone help today.  Hope this helps others too.

  Jason

• How to fix a corrupted .pst file

  original title: corrupted PSt file and I've tried everything I know of...

  Vista and Outlook 2007.

  I opened outlook a few days ago and received the error msg telling you that the .pst file is damaged and you need to run the Inbox Repair tool.  When I clicked 'OK' she keeps just for Outlook.  I tried the tool and could not find even with checked hidden files.  I stumbled upon a 3rd party recovery tool and he ran b/c it is 'free '.  I was joking b/c they wanted $130 after getting all my files and I don't know actually, they recovered their.  I then tried to find scanpst.exe on my installation diskettes file, but I have not found them.  Then I downloaded the scanpst.exe online file and tried to run.  I get an error message immediately and it won't work.  I looked at hundreds of forums and posts, and nothing works.

  What else can I try?

  Hello

  see if that helps

  http://Office.Microsoft.com/en-us/Outlook-help/repair-an-OST-or-PST-file-in-Outlook-HA001056300.aspx

  This is the vista repair forum

  for the problems of outlook please repost the link below in the outlook forums

  http://answers.Microsoft.com/en-us/Office/Forum/Outlook