Startup error message: PXE - E53: no boot file name given

Similar Questions

• Windows does not start with error - PXE - E53: no boot file name given

  I have a PC HP P6010in at home, but for 3 days while turning on the PC, I get the error PXE - E53: no boot not received and after that the wndows file name 7 I installed does not turn. Even the advanced startup options do not come.

  Please help solve the problem.

  Thanks in advance

  Hello

  This error comes if the operating system or any boot device is not at the start of the network, where the system tries to boot from the network or Boot Rom. seems the BIOS setting is lost. To solve the problem. Enter the BIOS by pressing F10 or F1 and reach the start (on the top with the right arrow key) tab. In the Startup tab, there should be an option related to the priority of the device, select first boot as drive boot HARD settigs, and then save by pressing F10, select Yes for confirmation.

  Now a PC will reboot and hope that the windows starts.

  Good luck

• ESXi 5 PXE - E53: no boot file received

  Just installed ESXi 5 on any new host configuration.  Installed vsphere client on another pc. I put the windows xp 32-bit iso file burned in the CD of the new configuration of the host.  In vsphere client, I have the virtual machine, I added just right click-> modify settings, click cd/dvd drive selected to connect to power, clicked on file iso datastore, traveled to a tools-isoimages file and selected windows.iso.  is that correct?

  

  then I put power off and power on.

  to get the following error on the console VM.  Starting AMD network... PXE - E53: no boot file name received PXE = M0F: exit Intel PXE ROM.  Operating system not found.

  

  What I usually do, it of to open the browser to store data in the vSphere Client, create a folder for example, the repository ISO - on one of the warehouses of data and download the ISO installation on this issue. Then select the ISO appropriate for this data store folder when you want to install the OS on a new VM.

  André

• PXE - E53: no boot after update from Dell file

  In recent weeks, I have a new inspiron 5999. yesterday, there was an update from dell and the computer restarted I had a black with screen

  Intel UNDI, PXE - 2.1 (build 083) Copyright (C) 1997-2000 Intel Corporation
  This product is covered 459 by one or more of the following patentsL US5, 307, US5, 434, 872, US5, 732, 094, US6, 570, 884, US6, 115, 776 and US6, 327, 625
  ADR MAC CLIENT: 18 03 73 11 F9 00 GUID 44454C4C-4700-1034-8035-B8C04F4E5131 PXE - E53: no boot file name given
  PXE - M0F: Exit PXE ROM.
  Reboot and select proper boot device
   
  What should I do now and what should I do to avoid this problem in the future?

  Go to the startup F2, boot sequence option, select UEFI, apply, exit and should start normally. I got this Dell and it worked for me. Good luck to both of you!

• Startup error message: "Microsoft Mobile PC presentation adaptability Client has stopped working".

  I recently tried to install SP2 to Vista, but it failed. I tried all the resolutions posted, but it is not always correct it. Later, I started my Vista (automatically restored to SP1) and it came with a mistake, "Microsoft Mobile PC presentation adaptability Client has stopped working". I tried searching on the net for similar problems, but I could not find any solution. He comes back every time you start, after that the background, shortcuts and the system tray loaded. This error started showing when I tried to install SP2, but he failed and returned to changes. I think that something could have gone wrong and that's why it shows this message.   Today I tried the system restore to the restore point JUST before I tried to install SP2, but it ALSO failed and brought me back to the State.
  I'm not sure if it's related, but I'm also no longer be able to use Windows Media Center, as every time I start it I immediately receive the error message "Media Center has stopped working".
  My computer:
  Gateway M6842B laptop
  Version of Windows Vista SP1 32-bit
  Intel Core 2 CPU
  T5300 @1. 73 GHZ 1.73 GHZ
  2.00 GB OF RAM

  Hi zensurferboi,
   
  First, we will check if we get error safe mode, start the computer in Safe Mode reboot and press the F8 key for about four to five times. You'll see the Mode without failure listed in the advanced window options, select Safe Mode, and then press ENTER.
   
  Check if the error mode without failure.
   
  If the startup error message does not appear safe mode, I recommend you to place the computer in a clean boot state, and check if the problem occurs in a clean boot state.
   
  To put the computer in a clean boot state, follow these steps:
   
  Perform a clean boot
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  a. log in the computer using an account with administrator rights.
   
  b. click Start , type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
   
  c. under the general tab, click Selective startup, and then clear the Load Startup items check box.
  (The box use the Boot file is not available.)
   
  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK, and then click restart.
   
  Once the computer restarts, check if you get the error of starting.
   
  Reset the computer to start as usual
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , type msconfig.exe in the Start Search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. On the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If you don't receive the start-up error message after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• Equium A100-147 with error message "PXE - E61 Media Test Failure"

  Hi all

  I Equium A100 out of warranty due to the error message "PXE-61 Media Test Failure" I took it to my local computer Lamplighter, told me my Toshiba 60 GB hard drive failed (MG6034GSX) and replaced by another 120 GB model.
  I tried to reload the Toshiba Recovery disk system, reload reached 75%, then the messages come in saying that it does not find a lot of operating system files.
  Thinking the recovery disc was faulty, I got a replacement from Toshiba, and this reload disk gave the same problem.
  I loaded XP Professional on the 120 GB HARD drive and it works OK but I'd like to load original as it came with XP MCE.

  Is my problem the 120 GB HDD which should be as original 60 gb and a HDD for Toshiba genuine to accept the recovery media?

  Does anyone have any ideas, I would really appreciate your help.

  See you soon
  diggermender

  Hello

  Don t think that it is a problem of restore CD is normally impossible
  I think that the problem might be related to the HARD drive.

  First of all, you need to access the BIOS and should set the defaults (don't forget to save it).
  Then try to format the whole HARD drive and also remove the created partitions.

  Then you could try again installing the OS from the recovery CD.
  Usually, this procedure works fine

  Good luck

• Re: Satellite P200-1EE - displays an error message in the windows Boot Manager

  I left my laptop alone and down for a few hours and when I'm back on him shows an error message in the windows Boot Manager.
  It says unable to start windows and a recent hardware or software change might be the cause. It asks me to insert my windows installation CD, and if I n t have the CD then to ring for help but unfortunately I really can t find a number at the present time.

  It also reads this:
  File: \BOOT\BCD
  Status 0xc000000f
  Info: an error occurred trying to read the boot configuration data.

  Does anyone know how to deal with this, or this happened to anyone before?

  Hello

  Maybe this article can help http://support.microsoft.com/kb/927391

• Impossible to remove a file from the desktop, get the error message "cannot read the source file or disk.

  I can't delete a file from my counter top. Error message: cannot read the source file or disk. He is an Adobe file with logo in white box.

  Boot into safe mode and see if it will remove. If this is not the case, try this tool.

  Unlocker File Remover

  Download it from FileHippo
  http://filehippo.com/download_unlocker/

  Download from CNET
  http://download.CNET.com/WOT/3000-2378_4-75011499.html

• Error message: can not find script file "c:\". WINDOWS 32\system\windows.db»

  Original title: error message: can not find script file "c:\". WINDOWS 32\system\windows.db» Help!

  After starting my Vista laptop, I get the error message: can not find script file "c:\". WINDOWS 32\system\windows.db» The mouse cursor freezes and I can't do anything on the PC. The PC will run in Safe Mode help!

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Try to install Itunes 64-bit, get the error message that says a DLL file is missing. How can I fix?

  I have windows 7, 64 bit.  I am trying to install ITunes 64-bit Installer but get an error message indicating that a DLL file is missing.  How can I fix?

  Hello

  Welcome to the Microsoft community, the best place for all windows related queries.

  I see that you can not install iTunes 64-bit install as it says .dll file is missing.

  I suggest to download the installer once more and then try to install it once more.

  If you still experience the problem, then I recommend you view the query on the Apple support forums. Here is the link for your reference.

  https://discussions.Apple.com/index.jspa

  For other Windows-related issues feel free to get back to us. We're always here to help.

• How to fix the script error message: can not find script file "C:\program files (x 86) \uninstall scripts\creative cloud enterprise\install.wsf»

  How to fix the script error message: can not find script file "C:\program files (x 86) \uninstall scripts\creative cloud enterprise\install.wsf»

  Behalf of the company

  Packer links https://forums.adobe.com/thread/1586021

  http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

• I am trying to download items 9 to a new computer and get an error message that says: "the archive file Elements 9 is missing.

  I am trying to download items 9 to a new computer and get an error message that says: "the archive file Elements 9 is missing" how to fix this?

  as well, you need the 7z and the exe.  put them both in the same directory and double-click on the exe file.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• When packing for a file in indesign - error message - unable to copy necessary files related or

  When packing for a file in indesign - error message - unable to copy necessary files related or

  Usually caused by an 'illegal' character as a slash or an asterisk in a file name or folder, but can also be caused by paths very long for the links.

• Generation error message PDF: cannot open the file for the generation of a frame (Version 7.2) PDF book

  Hello

  I'm transforming a book in PDF and I get the error message unable to open a file (... < Filename > FM) and the dialog box unavailable fonts also appears. The tricky thing is that I converted the same book in PDF just a couple of days. Now, when I tried to do it again, I'm getting the above mentioned error message. I have tried if you deselect the file > Prefrences > General > remember checkbox missing fonts too. However, it did not help to generate the PDF file. I will be grateful if someone offers a workaround solution for this issue. Thanks in advance.

  Usually, deselection Remember lack of fonts work.

  The missing fonts message when you or FrameMaker opens the file. The solution is to open all the files in the book, or at least those with the "missing" font, clear the message for each file. Now print the book in PDF format, while keeping open files. It usually works because you already erased the messages of missing fonts.

• When you try a yahoo search I get the error message "windows cannot find (web site name) make sure you typed the name correctly.

  Original title: error message

  When you try a yahoo search I get the error message "windows cannot find (web site name) make sure you typed the name correctly.

  Hello

  ·         What web browser do you use?

  ·         Would which site you find?

  ·         The issue is that with Yahoo search?

  ·         Exactly how you try to search? Web site or toolbar in Internet explorer?

  You try to use the Bing search engine to search for Web pages online. To access Bing search engine type www.bing.com in the address bar. Please provide us with more information about the issue to help you further.