C250-interference severe fm tuner during playback of the recording.

Similar Questions

• sound during playback of the recorded music is bad

  the sound on my acer crystal eye webcam plays terrible back. I record music played on my guitar, but playback is really bad. (not bad but not good singing music) if I could use a microphone outside and if so, how?

  Hello

  If I understand correctly, you need information on the connection of an external microphone on your Windows 7 computer. Do not worry, I'm here to help you with this information.

  Let us try the following methods and check if it works for you.

  Method 1:

  Run the fixit in the following Microsoft FixIt.

  Diagnose and automatically fix problems of Windows audio playback:

  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:

  Try the steps in the following article from Microsoft Help to connect the Microphone on your computer.

  Connect one microphone, music player or other audio device to your computer:

  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Please answer if the steps did not help, so that we could help you better.

• After 9.2 update I can no longer drag to make fast-forward or rewind during playback of the video. I can now only click to jump forwards or backwards in 10 second increments. However, if I stop the video I can then drag to move forward or backward.

  After 9.2 update I can no longer drag to make fast-forward or rewind during playback of the video. I could do those before the update. I can now only click to jump forwards or backwards in 10 second increments. However, if I stop the video I can then drag to move forward or backward. I tried this on Netflix and Hulu with similar results. Apple TV restarting is not to solve the problem.

  Maybe a bug in the new version?  Does anyone else know this?

  Thank you!

  Many people complain when they reach around in the dark watching a movie they press and cause the movie ff or rwd.

  I think that this version tried to improve the situation by requiring the user to press and release the button then slide as formerly.

• During playback of the gardens of the time, it freezes

  Original title: games

  during playback of the gardens of the time, it freezes when I try to visit the other sites of friends and it

  Hello

  Step 1:

  Click Start, and then type msconfig in the Search box and then press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  Step 2: Configure selective startup options

  In the System Configuration utility dialog box, click Selective startup on the general tab.

  Click to clear the Load Startup items check box.

  Note the check box use the Boot file is not available.

  Click the Services tab.

  Click to select the hide all Microsoft Services check box.

  Click disable all, and then click OK.

  When you are prompted, click restart.

  b Eddie

• An unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  I recently bought a drone DJI Phantom 3 kind have been treatment of videos more than usual and not have not had any problems. I use Lightroom for cataloging movies and I use the first to change.

  Since yesterday, I was not able to import any movie that I get the following error

  an unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  

  Initially, I thought that it was due to a spectacular crash of drone (Physics isn't SHE!) who corrupted the file that was being logged, m ais I can now no longer import any movie to Lightroom.

  
  I tried the following

  1. a different memory with a new registration card

  2 removing and re - import an old movie

  3. to remove and re-import and old movie created by another camera

  4. to remove Lightroom and rolling back to the previous version of LR CC (CC 2015 [1014445])-had the advantage of getting rid of the annoying new import dialog screen. -

  5. upgrade to El Capitan to see if maybe OSX update may help.

  
  

  None of them had no effect, can anyone help?
  

  
  

  
  

  
  

  
  

  
  

  Hello

  You're welcome ShawWellPete, I thank you for everything.

  Yes, this person is the windows user, but it was the same question that could have been resolved by quicktime 7. (pending confirmation)

  Try to disable the start-up services and restart the mac and then try: take control of start-up and connection elements. Macworld

  There could be some service startup that is in conflict.

  Concerning

  Jitendra

• Dell xps l502x freezes making buzzz sound during playback of the audio or video file

  I have a two year old dell laptop xps l502x, who recently started producing some strange audio buzzz at regular intervals during playback of audio or video file.le sound is very similar to the sound when games used to freeze with the same anonying buzzz sound which is a very well known with the XPS L502X.i used only to have problem that the sound during games used to hang , but recently it has begun to occur during playback of audio or video files too.

  RTZ87,

  I just had a quick glance and the solution is in the thread below. Uninstall 'Dell Support help' and 'Dell Support Assist Agent'. They have been automatically installed on your laptop in the last two days and seem to be causing the problem.

  

• Update graphics and photos during playback from the timeline

  This problem appeared all of a sudden, and I can't understand why or how to fix it. Here's the situation:

  • I have a video clip on track 1 and a graphic or a photo on track 2 (the problem occurs with any kind of graphic file or photo).
  • The graphic or photo is in its correct position when there is no activity on the timeline, but it suddenly shifts its position during playback and scrubbing.
  • Once I stop playback or rub the graphic or photo is in its place.
  • The same thing if I drag the position or the value of the scale values in the effect controls panel.
  • If I exit the chronology, the graphics in the output video are in their correct place.

  Here is a video screenshot showing what is happening: https://youtu.be/4vbrwEDsjS4

  I tried dumping the preview files, and this makes the problem go away for a few minutes. Then the same problem reappears.

  Any help with this problem would be greatly appreciated!

  -Ken M.

  I'm not at my computer editing now, but I think it's project > settings > General in the menu.  Choose the only rendering software.

• My Windows Media Player 11 won't play, copy or burn one of my CDs, he will see that I have a cd, but it will give me an error message saying that it has encountered an error during playback of the cd in digital mode

  I tried have deleted the cd/dvd drivers and uninstalled and then tried again with a new one, by restarting the computer and who did not seem to work have cleaned the lens in the cd with a cd player! also, I changed the burn speed to see if that would work and nothing!

  Also restored my computer and it didn't solve the problem but I have had this for some time and sometimes it will not work and sometimes it will work I just hope this isn't a big problem one thing I noticed, is that I don't have the thing IMPA you are supposed to have I do not know why and I think that's what it's called. I have also the new driver I have is just a DVD RW and I don't know why looks that can someone please help me!

  I also ran the microsoft fix and he said your driver is unable to write CD's but it does nothing Please HELP THANK YOU SO MUCH!

  Thanks for the reply tim but it was my fault. I discovered that was.in problem device manager choose ata/atapi controllers ide and settings properties.advance then find which channel ata your dvd - rw or cd's and then uncheck the box that refers to the memory.wmp of the cache is now ok, but still curious, no way to change from digital to analog playback on the device tab, as others have said.

• Weird bug in my animation, occurs during playback in the Chrome browser? How to debug this?

  Hey all,.

  I have an animation / swf file, I created in flash, when I export the swf and test it in flash is very good.
  And when I run the Web page that contains the swf file in the browser Google Chrome, I get as a white box that appears on the screen for a few seconds on the first loop of the animation, and then he goes and I can't workout, why he is doing this in Chrome, all other browsers show the animation behave as it should

  I put this animation in my Web page using a method like

  < script type = "text/javascript" >

  AC_FL_RunContent)

                                'codebase', ' https://download.Macromedia.com/pub/Shockwave/cabs/Flash/Swflash.cab#version=6, 0,0,0 ',

  'width', '683'.

  'height', '161',

  "src', ' images/hand."

  'quality', 'high ',.

                                'pluginspage', ' https://www.Macromedia.com/go/getflashplayer ',

  "align", "middle",

  'play', 'true ',.

  'loop', 'true ',.

  "scale", "showall"

  "wmode", "transparent."

  "devicefont", "false."

  "id', 'hand."

  "name", images/hand"."

  "menu", "false."

  "allowScriptAccess", "sameDomain",.

  "film', ' images/hand."

  "salign", "

  ); end AC code

  < /script >

  < noscript >

  < object classid = "clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase =" " http://download.Macromedia.com/pub/Shockwave/cabs/Flash/Swflash.cab#version=7, 0,19,0 "width ="683"height ="161"> "

  < param name = "movie" value = "images/main.swf" >

  < param name = "wmode" value = "transparent" >

  < param name = "quality" value = "high" wmode = "transparent" >

  < embed src = "images/final_main.swf" quality = "high" pluginspage =" " http://www.Macromedia.com/go/getflashplayer "type =" application/x-shockwave-flash"width ="683"height ="161"> < / embed > "

  < / object >

  < / noscript >

  This is probably a method obsolete? This file was created in 2006.

  This is then test the file in flash or appear in any of the other browsers like ie, ff, safari etc and behaves as it should. Why Chrome do this for me?

  I tried the debug file and going through the layers, but I don't see why this box would come up during a few seconds on the first loop.

  Any help would be great

  Have you tried to update the HTML Wrapper with a technique contemporary flashembedding?

• screen on iphone 6 more custom turn during playback of the song

  Today, I discovered that my iphone more than 6 does not turn to the landscape when I play a song.it made for youtube and on the home screen, so the lock screen is not enabled. I've switched back to standard zoom and reset the settings. its ios updated 9.3.1

  Hello Missesj,

  Thank you for using communities of Apple Support.

  I understand that you expect from the "Now Playing" screen in the app music spinning in landscape orientation.  Some applications, such as the music app, do not turn.  You can make sure the rotation function works, however, in testing it in another application, like the calculator:

  Check your settings and test with an app that turns

  Some applications don't run. Some could use only portrait or landscape mode, or switch depending on the content. To test the screen rotation, open the calculator provided with your device application. If the screen does not turn when you rotate the device, try the following steps:

  1. If you see in the status bar, Orientation lock is activated. To turn it off slide up from the bottom of the screen to open the control center, then click on .
     
  2. If you have an iPhone Plus 6 or iPhone 6 s more, turn off The screen Zoom to rotate the homescreen.
  3. If you have an iPad with a switch, turn on or off side.

  Get more help

  If you have checked your settings and your screen still does not turn when you use an application that must turn (as the calculator application), do the following:

  1. Restart your iOS device.
  2. If the screen is still not running, contact The Apple support.

  If the screen does not turn on your iPhone, iPad or iPod touch

  Take care.

• During playback from the USB-6008 on the OID entry, he reads the top floating. How to configure to read low when it is anything but 5V

  I have a USB-6008, I read an entry on the OID.

  I want this 1 report when the line has a present 5v and 0 for something else.

  When I don't have anything on the lines.  It reads 1

  How configure it to read 0 when nothing is connected?

  Also how I re this in c#

  Thank you

  Hello ashitakaLax,

  The USB-6008 housing has an internal pull-up resistance to 5V (according to page 22 of the User Guide and specifications) that pulls the line to 5V when nothing is connected.

  In order to change this, you can add an external resistance of menu drop down to make the output to the earth when it is disconnected, if your device should get power to fuel the high line.

  Kind regards

• During playback of the audio wave or mp3 files or listen to audio on my computer, it is occasionally a few distortions (crackling noise)

  When you play any audio on my computer file, or listening to any audio on my computer, either by e-mail or by using Windows Media Player or itunes, there is sometimes a slight distortion that occurs, is not there when I listen to the audio file using a different medium than my computer.

  Hi, thanks for your very complete instructions. In response to your question, I have a HP ProBook 4530 s. computer I was able to go on the site HP Support help and download an updated audio driver. The question now seems to be resolved. I printed to the top of your instructions, however and keep them for future reference.

  Thank you

• during playback of the e mails his guard crashing, saying internet has stopped working? What can I do?

  my mail tells me internet windows does not? no problem with any other page?

  Hello WendyCoote,

  What program e-mail do you use to read your e-mail, or you connect to your web site email provider?
  For Windows Live Mail, I suggest to republish your question here:
  http://www.windowslivehelp.com
  If you are using a specific program, please let us know so that we can better help you.

• HOW TO TELL (MULTIPLE TRACKS) ON A MUSIC AUDIO PLAYING IN THE SAME SCENE? AND WHAT I NEED TO ADJUST THE VOLUME DURING PLAYBACK OF THE TRACK - OR WHO WILL BE AUTOMATIC AS SOON AS I START THE NARRATION?

  ON MOVIE MAKER - I'M TELLING ON A TRACK THAT PLAYS WHILE THE PHOTOS ARE DISPLAYED.

  1. HOW DO I TELL ON THE MUSIC TRACK PLAYING?

  2. DO I HAVE TO SET THE COLUME ON THE MUSIC TRACK - OR - THE MUSIC WILL AUTOMATICALLY ADJUST ONCE I HAVE START THE NARRATION?

  3. WHEN I FINISH a SEGMENT OF THE MOVIE - AND "SAVE THE PROJECT" - HOW DO I INSERT IT IN THE FILM COMPLETE?

  I HAVE TO SAVE AS WINDOWS MEDIA? WHAT I HAVE TO PUT IT ON A DVD? ... AND THEN INSERT IN MY COLLECTION AND THEN ADD THE FINAL MOVIE?

  PLEASE NOTIFY

  1. HOW DO I TELL ON THE MUSIC TRACK PLAYING?
  =================================================
  Apparently you have imported a file of music to your slide show and you
  want to add narration also. I think would be best to delete
  the music file for now, create your narration, and then replace it
  music file.

  The problem of having two audio tracks playing simultaneously?

  You must save the slide show / narrative as one. WMV Movie file...
  File / save movie file. Then reimport them saved. Just the WMV video file
  as you would for any other video and audio music will be
  clear for you to add your music files. The volume of the tracks can be
  adjusted to... Right click / Volume, drag the slider.

  =================================================
  2 CAN I ADJUST THE VOLUME ON THE PIECE OF MUSIC
  -OR - THE MUSIC WILL AUTOMATICALLY ADJUST ONCE I HAVE START
  NARRATION?
  =================================================
  The removal of the music file will clear this up.
  =================================================
  3. WHEN I FINISH a SEGMENT OF THE MOVIE - AND
  'SAVE PROJECT' - HOW DO I INSERT IN FULLY
  FILM?
  =================================================
  In addition to "Saving The Project" (for the future edition)...
  Save the movie file in the... WMV format.

  Then you can import the saved. WMV video file and
  Use it in a project as you would for any other... WMV
  video file.

  =================================================
  I HAVE TO SAVE AS WINDOWS MEDIA?
  =================================================
  . WMV would be the format of the recorded movie.

  DV - AVI is also an option, but the file size will be much larger.
  I'll add options at the end of this registration message.

  =================================================
  WHAT I HAVE TO PUT IT ON A DVD? ...
  =================================================
  No, just save to a folder on your hard drive.
  =================================================
  AND THEN INSERT IN MY COLLECTION AND THEN ADD
  FOR THE FINAL MOVIE?
  =================================================
  As stated previously, just reimport him. WMV video and use it
  as you would for any other video clip.
  =================================================
  The following article is maybe worth a visit:

  Record a narration in Movie Maker 2 and some of the
  You may encounter problems of microphne.
  http://www.mightycoach.com/articles/mm2/narration-moviemaker2.html

  the following video tutorials may be worth a visit:

  Windows Movie Maker 2 tutorials
  http://www.atomiclearning.com/moviemaker2
  (in the 'I' section there is a clip called: "Narrating your")
  film project")

  More tutorials:

  Articles and tutorials for Windows Movie Maker
  http://www.windowsmoviemakers.NET/tutorials/
  (#2 is Audio / Narration)

  And Movie Makers Forums may be worth a visit:

  Movie Makers Forums

  http://www.windowsmoviemakers.NET/forums/default.aspx

   

  =================================================

  info on savings:

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  In addition, you may find it useful to use
  a custom profile:

  Movie Maker 2 - Save movies - custom WMV profile
  http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

• System crashes, moreover, it freezes during playback of the media or on a site with the media.

  If I go on a site with video, it stops, and a sound is heard.  It crashes sometimes.  These are the messages I had

  Stop: OxOOOOO8E (Ox805BC1E9, OxBA287c7c, OxcOOOOOO5, OXOOOOOOOO)

  ALSO

  BCCode: 1000008e BCP1: C0000005 BCP2: 805BC1E9 BCP3: BA287C7C
  BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1

  Please provide additional information on your system:
  What is your system brand and model?
  What is your version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
  For more audio information, expand components, click on Sound Device, click on edit, select all, copy and then paste the information here.
  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all of your files to dump.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send information from 5 last memory dumps.
  No matter what you use for protection against malware, please follow these steps:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!