C2600 with vpn support

Similar Questions

• With the support of IKEv2 VPN server configuration

  I'm putting my pc W7 as a VPN server with the support of IKEv2, but it escapes me, although I am not a novice.

  I read a lot of forums "directions for use", but no address really details.

  (1) for IKEv2, I need to install a certificate... I could not find a step by step guide.

  Everyone for help...?

  (2) how to set up the VPN server on my local LAN for testing to exclude router firewall etc... and connect my 920 lumia.

  Everyone for help...?

  Hello

  My apologies for the delay in response.

  For that matter on the VPN with IKEv2 Server Setup, you will need to post your request here on the TechNet forums.

• [WRVS4400N] RADIUS with VPN?

  Hello

  I have an Active Directory with RADIUS server and I intend to buy a wireless router with VPN functionality,

  I took a glance at the WRVS4400N documentation and I saw the use of RADIUS with 802. 1 X and wireless, but nothing about its use with VPN...

  It is therefore possible to use RADIUS for authentication on the VPN?

  Thank you

  Hi Mathieu chick and welcome in the community at the homepage of Cisco!

  The WRVS440N is managed by the Cisco Small Business Support Community.

  For discussions about this product, go here.

• Satellite A660-10W with HDCP support

  Hello guys,.

  I have the A660-10W and want to download iTune HD movies
  He said: I need to have a video driver with HDCP (support?) but I don't know, and I do not understand what it is.
  I would appreciate your help - as you have done very well in the past.

  Thanks in advance

  Hello

  HDCP is a copy protection Protocol.
  This Protocol prevents copying of high-definition movies.
  If the system does not support HDCP, you will not be able to send data to the device (TV, LCD) through other ports such as DisplayPort or DVI or HDMI.

  Microsoft Vista and Windows 7 use HDCP screens and computer graphics cards.
  But if you want to watch movies in high definition on an external TV, you must ensure that both HDMI ports on TV and laptop support HDCP.

  But it seems that Sat A660-10W does not support HDMI port and so you will not be able to watch as the HDCP protected HD movies on external monitors.

• I had to reset my Apple ID with Apple support. I get charged for it?

  I had to reset my Apple ID with Apple support. I get charged for it?

  We do not know. If you called for support and have asked your credit card and says that would cost the call, then you will be charged. If you make a call within your free support for 90 days after purchase, then no, it is free of charge. If no charge was addressed so that they don't charge you.

  We are not Apple, but simply users like you. Should ask questions such as the vendor who provided the service. We have really no way to know the answer.

• Can H8 - 1360t I add a second DVD with lightscribe support? How do I know: compatibility

  Windows 7 new h8 - 1360t a blu ray player I want to add a 2nd dvd with lightscribe support player.  Which 1 is compatible?

  Hello

  It is a machine CTO, he has 2 bays ODD, you can configure to order something as one of them:

  Primary optical drive

  Must select one of the following options: DVD SuperMulti burner

• Create the diskette of starting with 'CDROM support.

  CDROM is really so old DVD boot floppies

  do not work. Thank you.   Saint_Patrick.

  Hello St,

  If you have problems installing Windows 7, and if you want to go back to Windows XP, the best way would be to Factory Reset. Factory reset will bring back Windows XP on the computer.

  I suggest you to check with Dell support to learn how to perform a factory reset.

• How to get back in touch with technical support MS?

  I had some problems with my desktop computer.  The most recent is an error message flashing on the screen, just before closing.  Its quick access, but it looks like he says: Application 0xc0000142 error.
  I have been in contact with MS tech support and have an Incident.  The technician gave me instructions to perform and I send the results then asked her.  It was a week ago!  I've not heard anything since.  I tried to send the news to technology, in the hope of a prompt response.  I sent an email asking for a response to my email, she got even.  NO LUCK.
  I even checked the list of incident report, to see if, for some reason, the case was closed.  The incident # is not listed.
  How can I contact technical support MS, to pursue the matter if the contact information is the email address of technicians?

  Try to call 1-800-642-7676 and let them know you have a case and want to get back in touch with technical support.

• Looking for Wireless-N Gigabit Router with VPN

  Hi all

  I recently bought the WRT310N Wireless - N Gigabit Router and I'm in love! I've updated from an old Netgear router, so now I'm enjoying performance gigabit.

  After buying my SIN, I now use VPN to connect to my NAS when I'm remote.  I started to look at installing openVPN on my NAS, but it seemed complicated and buggy, so who's got when I read that a large number of routers today include built-in VPN features.

  I searched but did not find any Wireless-N Gigabit router that also included the VPN features.  I found 10/100 routers with VPN, but not Gigabit Wireless-N.

  Linksys Wireless - N Gigabit routers with VPN integrated?  If Yes, can you tell me what model should I buy?

  In summary, I like to keep my Wireless-N Gigabit performance and (hopefullly!) the use of the VPN on the Linksys router so that I don't have to worry about the complex and buggy software VPN installs on my NAS.  How can I do this?

  Thank you!

  As far as I know model onlyh 1 that is suited to your requirement is WRVS4400N. Its a Wireless Gigabit router.

• Problems with my 4 port Gigabit Security Router with VPN

  OK, I got a wireless router and I have a Web site hosted by 1and1.com and I could connect my fine site. But recently I got the 4 port Gigabit Security Router with VPN and since then I have not been able to connect to it even, I started my own ftp server it always blocks and it will capture everything until she tries to recover the files, then it expires just after a while

  What is the model number of your device? If you have a Web server and an FTP server behind the router, you will need to transfer the ports used by the said request. Ports TCP 80 and TCP 21.

• Why is Win XP Pro SP3 computer get error 'no video with format supported or a MIME type found.

  I have a Windows XP Pro SP3 computer, and I get the error 'No video with format supported or a MIME type found.' When I try to watch videos in the browser. I used to be able to view the videos, but 3 months ago they stopped working and I started to receive the above error message. What could be the cause for it? Thanks a lot for your time and help! God bless you!

  Daffodil5 said

  The site "paperwishes.com" (card making supplies) plays videos of product for some of its products. A blue box shows the word 'Play' next to the item. When I clicked on this blue box last spring, he'd always play. He's now hit & miss. Sometimes, it will offer to play via MP4, but rarely. Their 'webisode' will play not (who played in the spring, as well). Cannot understand what has changed: Google update leaving Windows XP in the past?

  Videos on the site can be read with an HTML5 player and do not use the Flash Player Plugin like a video I cheacked used HTML5 player when I right click on it. Actually, it turns out the link video was a Youtube video and YT uses the HTML5 player when possible and descends to Flash Player if need be if they always support such.

  With a little work, you can get the video to work in Firefox on the old WinXP EOL of HTML5.

  http://www.MSFN.org/Board/topic/175591-enable-MP4-h264-AAC-HTML5-video-in-Firefox-on-Windows-XP-without-Flash/

• C6280, win7 cannot print via active network with VPN

  Hi, I have 2 PCs, one Vista, one on Win7. With Vista, I can print over the network.

  Also, via USB on the win7 PC I can print.

  But I can't print via active on the Win7 with VPN network. Without VPN, it works.

  I had several problems with the installation of the SW. Finally it worked (I think I had to turn my VPN connection)

  It recognizes the printer, the State says: ready, but when I print, I get an error after a while.

  When I stop the VPN, I can print.

  I tried to load the patch for Win 7 (recommended on HP circuit (printer disappears), but what it says that I don't have the SW right?)

  any idea?

  Hi ReneH,

  I am pleased to hear that the problem has been resolved. Have a wonderful day.

• ENGTX470/G/2DI/1280MD5 windows 7 ULTIMATE driver with wddm support

  Windows 7 ULTIMATE driver with wddm support! Can someone Kryptonite where can I find this product above driver?

  Original title: ENGTX470/G/2DI/1280MD5

  Hello

  I ask you to follow this link to download the drivers for the graphics card:

  http://www.ASUS.com/Graphics_Cards/ENGTX470G2DI1280MD5/#support_Download

  Please let us know the status of the issue.

• 3 RVS 4000 with VPN connection

  Hello

  I want to connect in a triangle 3 RVS 4000 router with VPN

  I configured 3 routers, which can connect to the Internet. Each of them are configured as the gateway.

  I created 2 tunnels on each router. But the vpn connection cannot be established.

  Here is the configuration of ROUTER1 another are configured in the same way, only the remote group configuration is different

  What I also open some ports for VPN, if yes which and were

  Thanks fpr your help and your response

  HP. Meyer

  Hi hanspetermeyer,

  Thank you for posting. You don't need to open all the ports for VPN. I noticed that your screenshot shows two routers have a common LAN subnet of 192.168.100.x. You will need a different local subnet for each router:

  1. 1 router: 192.168.1.1
  2. Router 2: 192.168.2.1
  3. Router 3: 192.168.3.1

  I think that you will find the tunnels only connect once you change the LAN IP of the routers so that they are on different subnets. Please let us know if it works.

• Problem with "vpn sysopt connection permit.

  Hi all

  I would like to ask you for advice with "vpn sysopt connection permit". I have a problem with by-pass-access list (acl) in the INSIDE interface. As I understand it and I'm going to use this command, there is no need to especialy allow traffic in the access list for the INSIDE and I can control the filter-vpn traffic. But in my case it's quite the opposite, I want particularly to this INTERIOR acl traffi. When I allow this traffic inside acl L2L tunnel rises, hollow traffic flow vpn-fltr ane acl that everything is OK. But when I do not allow that this traffic is inside of the rule with Deny statement in acl INSIDE block traffic and tunnel goes ever upward. Part of the configuraciton which you can view below.

  Please let me know if I'm wrong, or what I did wrong?

  Thank you

  Karel

  PHA-FW01 # view worm | Worm Inc

  Cisco Adaptive Security Appliance Software Version 4,0000 1

  PHA-FW01 # display ru all sys

  No timewait sysopt connection

  Sysopt connection tcpmss 1380

  Sysopt connection tcpmss minimum 0

  Sysopt connection permit VPN

  Sysopt connection VPN-reclassify

  No sysopt preserve-vpn-stream connection

  no RADIUS secret ignore sysopt

  No inside sysopt noproxyarp

  No EXT-VLAN20 sysopt noproxyarp

  No EXT-WIFI-VLAN30 sysopt noproxyarp

  No OUTSIDE sysopt noproxyarp

  PHA-FW01 # display the id of the object-group ALGOTECH

  object-group network ALGOTECH

  object-network 10.10.22.0 255.255.255.0

  host of the object-Network 172.16.15.11

  PHA-FW01 # show running-config id of the object VLAN20

  network of the VLAN20 object

  subnet 10.1.2.0 255.255.255.0

  L2L_to_ALGOTECH list extended access permitted ip object object-group VLAN20 ALGOTECH

  extended access list ACL-ALGOTECH allow ip object-group object VLAN20 ALGOTECH

  Note EXT-VLAN20 of access list =.

  access list EXT-VLAN20 allowed extended ip object VLAN20 ALGOTECH #why object-group must be the rule here?

  access list EXT-VLAN20 extended permitted udp object VLAN20 object-group OUT-DNS-SERVERS eq field

  EXT-VLAN20 allowed extended VLAN20 object VPN-USERS ip access list

  EXT-VLAN20 extended access list permit ip object VLAN20 OPENVPN-SASPO object-group

  EXT-VLAN20 allowed extended object VLAN10 VLAN20 ip access list

  deny access list extended VLAN20 EXT ip no matter what LOCAL NETS of object-group paper

  EXT-VLAN20 allowed extended icmp access list no echo

  access list EXT-VLAN20 allowed extended object-group SERVICE VLAN20 object VLAN20 everything

  EXT-VLAN20 extended access list deny ip any any newspaper

  extended access list ACL-ALGOTECH allow ip object-group object VLAN20 ALGOTECH

  GROUP_POLICY-91 group policy. X 41. X.12 internal

  GROUP_POLICY-91 group policy. X 41. X.12 attributes

  value of VPN-filter ACL-ALGOTECH

  Ikev1 VPN-tunnel-Protocol

  tunnel-group 91.X41. X.12 type ipsec-l2l

  tunnel-group 91.X41. X.12 General attributes

  Group Policy - by default-GROUP_POLICY-91. X 41. X.12

  tunnel-group 91.X41. X.12 ipsec-attributes

  IKEv1 pre-shared-key *.

  PHA-FW01 # show running-config nat

  NAT (EXT-VLAN20, outdoors) static source VLAN20 VLAN20 static destination ALGOTECH ALGOTECH non-proxy-arp-search to itinerary

  network of the VLAN20 object

  dynamic NAT interface (EXT-VLAN20, outdoors)

  group-access to the INTERIOR in the interface inside

  Access-group interface VLAN20 EXT EXT-VLAN20

  Hello

  The command "sysopt connection permit-vpn" is the default setting and it applies only to bypass ACL interface to the interface that ends the VPN. It would be connected to the external network interface. This custom has no effect on the other interfaces ACL interface.

  So if you initiate or need to open connections from your local network to remote network through the VPN L2L connection then you will need to allow this traffic on your LAN interface ACL networks.

  If the situation was that only the remote end has launched connections to your network then 'sysopt permit vpn connection' would allow their connections around the external interfaces ACL. If If you have a VPN configured ACL filter, I think that the traffic will always accompany against this ACL.

  Here are the ASA reference section to order custom "sysopt"

  http://www.Cisco.com/en/us/docs/security/ASA/command-reference/S21.html#wp1567918

  -Jouni