[WRVS4400N] RADIUS with VPN?

Similar Questions

• Looking for Wireless-N Gigabit Router with VPN

  Hi all

  I recently bought the WRT310N Wireless - N Gigabit Router and I'm in love! I've updated from an old Netgear router, so now I'm enjoying performance gigabit.

  After buying my SIN, I now use VPN to connect to my NAS when I'm remote.  I started to look at installing openVPN on my NAS, but it seemed complicated and buggy, so who's got when I read that a large number of routers today include built-in VPN features.

  I searched but did not find any Wireless-N Gigabit router that also included the VPN features.  I found 10/100 routers with VPN, but not Gigabit Wireless-N.

  Linksys Wireless - N Gigabit routers with VPN integrated?  If Yes, can you tell me what model should I buy?

  In summary, I like to keep my Wireless-N Gigabit performance and (hopefullly!) the use of the VPN on the Linksys router so that I don't have to worry about the complex and buggy software VPN installs on my NAS.  How can I do this?

  Thank you!

  As far as I know model onlyh 1 that is suited to your requirement is WRVS4400N. Its a Wireless Gigabit router.

• Issue of operability of the ACS as RADIUS with ASA 5.0?

  Hello

  I'm trying my VPN to get authenticated user with RADIUS (ACS 5.0). and VPN users database is created in AD. Now when I am trying to connect through the Cisco VPN client, I am unable to do so. Infact, I get an error message (through debugging at the level of the SAA for aaa and isakmp) my RADIUS server is DOWN.

  Please let me know is there any compatibility issue with ACS 5.0 on it because everything was working fine on my version 4.2 of the ACS.

  Concerning

  Ritesh

  Ritesh,

  Yes, there is a lack of ACS 5.0 with vpn authentication.

  When you try to connect with the VPN client. you will not see any hits in the follow-up and the views.
  The ASDM logs: you'll see radius server is not accessible.
  Debugs you show RADIUS period.
  This will work with Ganymede.

  Access policy rule was does not. Also, could not use RADIUS as hit CSCsy17858

  http://cdetsweb-PRD.Cisco.com/apps/goto?identifier=CSCsy17858>; Used Ganymede + instead of RADIUS.

  If you want to use the RADIUS then you need to upgrade your version of acs to 5.1

  You can down load patch 9 (5-0-0-21 - 9.tar.gpg) and ADE-OS (ACS_5.0.0.21_ADE_OS_1.2_upgrade.tar.gpg) from the below path:

  Go to Cisco.com > support > download software > Security > Cisco Secure Access Control System 5.0 > Secure Access Control System Software 5.0.0.21 >

  Reference: update of the CSA since version 5.0 to 5.1:
  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.1/installation/guide/csacs_upg.html

  HTH

  Kind regards

  JK

  The rate of useful messages-

• Problem with "vpn sysopt connection permit.

  Hi all

  I would like to ask you for advice with "vpn sysopt connection permit". I have a problem with by-pass-access list (acl) in the INSIDE interface. As I understand it and I'm going to use this command, there is no need to especialy allow traffic in the access list for the INSIDE and I can control the filter-vpn traffic. But in my case it's quite the opposite, I want particularly to this INTERIOR acl traffi. When I allow this traffic inside acl L2L tunnel rises, hollow traffic flow vpn-fltr ane acl that everything is OK. But when I do not allow that this traffic is inside of the rule with Deny statement in acl INSIDE block traffic and tunnel goes ever upward. Part of the configuraciton which you can view below.

  Please let me know if I'm wrong, or what I did wrong?

  Thank you

  Karel

  PHA-FW01 # view worm | Worm Inc

  Cisco Adaptive Security Appliance Software Version 4,0000 1

  PHA-FW01 # display ru all sys

  No timewait sysopt connection

  Sysopt connection tcpmss 1380

  Sysopt connection tcpmss minimum 0

  Sysopt connection permit VPN

  Sysopt connection VPN-reclassify

  No sysopt preserve-vpn-stream connection

  no RADIUS secret ignore sysopt

  No inside sysopt noproxyarp

  No EXT-VLAN20 sysopt noproxyarp

  No EXT-WIFI-VLAN30 sysopt noproxyarp

  No OUTSIDE sysopt noproxyarp

  PHA-FW01 # display the id of the object-group ALGOTECH

  object-group network ALGOTECH

  object-network 10.10.22.0 255.255.255.0

  host of the object-Network 172.16.15.11

  PHA-FW01 # show running-config id of the object VLAN20

  network of the VLAN20 object

  subnet 10.1.2.0 255.255.255.0

  L2L_to_ALGOTECH list extended access permitted ip object object-group VLAN20 ALGOTECH

  extended access list ACL-ALGOTECH allow ip object-group object VLAN20 ALGOTECH

  Note EXT-VLAN20 of access list =.

  access list EXT-VLAN20 allowed extended ip object VLAN20 ALGOTECH #why object-group must be the rule here?

  access list EXT-VLAN20 extended permitted udp object VLAN20 object-group OUT-DNS-SERVERS eq field

  EXT-VLAN20 allowed extended VLAN20 object VPN-USERS ip access list

  EXT-VLAN20 extended access list permit ip object VLAN20 OPENVPN-SASPO object-group

  EXT-VLAN20 allowed extended object VLAN10 VLAN20 ip access list

  deny access list extended VLAN20 EXT ip no matter what LOCAL NETS of object-group paper

  EXT-VLAN20 allowed extended icmp access list no echo

  access list EXT-VLAN20 allowed extended object-group SERVICE VLAN20 object VLAN20 everything

  EXT-VLAN20 extended access list deny ip any any newspaper

  extended access list ACL-ALGOTECH allow ip object-group object VLAN20 ALGOTECH

  GROUP_POLICY-91 group policy. X 41. X.12 internal

  GROUP_POLICY-91 group policy. X 41. X.12 attributes

  value of VPN-filter ACL-ALGOTECH

  Ikev1 VPN-tunnel-Protocol

  tunnel-group 91.X41. X.12 type ipsec-l2l

  tunnel-group 91.X41. X.12 General attributes

  Group Policy - by default-GROUP_POLICY-91. X 41. X.12

  tunnel-group 91.X41. X.12 ipsec-attributes

  IKEv1 pre-shared-key *.

  PHA-FW01 # show running-config nat

  NAT (EXT-VLAN20, outdoors) static source VLAN20 VLAN20 static destination ALGOTECH ALGOTECH non-proxy-arp-search to itinerary

  network of the VLAN20 object

  dynamic NAT interface (EXT-VLAN20, outdoors)

  group-access to the INTERIOR in the interface inside

  Access-group interface VLAN20 EXT EXT-VLAN20

  Hello

  The command "sysopt connection permit-vpn" is the default setting and it applies only to bypass ACL interface to the interface that ends the VPN. It would be connected to the external network interface. This custom has no effect on the other interfaces ACL interface.

  So if you initiate or need to open connections from your local network to remote network through the VPN L2L connection then you will need to allow this traffic on your LAN interface ACL networks.

  If the situation was that only the remote end has launched connections to your network then 'sysopt permit vpn connection' would allow their connections around the external interfaces ACL. If If you have a VPN configured ACL filter, I think that the traffic will always accompany against this ACL.

  Here are the ASA reference section to order custom "sysopt"

  http://www.Cisco.com/en/us/docs/security/ASA/command-reference/S21.html#wp1567918

  -Jouni

• Problems with my 4 port Gigabit Security Router with VPN

  OK, I got a wireless router and I have a Web site hosted by 1and1.com and I could connect my fine site. But recently I got the 4 port Gigabit Security Router with VPN and since then I have not been able to connect to it even, I started my own ftp server it always blocks and it will capture everything until she tries to recover the files, then it expires just after a while

  What is the model number of your device? If you have a Web server and an FTP server behind the router, you will need to transfer the ports used by the said request. Ports TCP 80 and TCP 21.

• C6280, win7 cannot print via active network with VPN

  Hi, I have 2 PCs, one Vista, one on Win7. With Vista, I can print over the network.

  Also, via USB on the win7 PC I can print.

  But I can't print via active on the Win7 with VPN network. Without VPN, it works.

  I had several problems with the installation of the SW. Finally it worked (I think I had to turn my VPN connection)

  It recognizes the printer, the State says: ready, but when I print, I get an error after a while.

  When I stop the VPN, I can print.

  I tried to load the patch for Win 7 (recommended on HP circuit (printer disappears), but what it says that I don't have the SW right?)

  any idea?

  Hi ReneH,

  I am pleased to hear that the problem has been resolved. Have a wonderful day.

• 3 RVS 4000 with VPN connection

  Hello

  I want to connect in a triangle 3 RVS 4000 router with VPN

  I configured 3 routers, which can connect to the Internet. Each of them are configured as the gateway.

  I created 2 tunnels on each router. But the vpn connection cannot be established.

  Here is the configuration of ROUTER1 another are configured in the same way, only the remote group configuration is different

  What I also open some ports for VPN, if yes which and were

  Thanks fpr your help and your response

  HP. Meyer

  Hi hanspetermeyer,

  Thank you for posting. You don't need to open all the ports for VPN. I noticed that your screenshot shows two routers have a common LAN subnet of 192.168.100.x. You will need a different local subnet for each router:

  1. 1 router: 192.168.1.1
  2. Router 2: 192.168.2.1
  3. Router 3: 192.168.3.1

  I think that you will find the tunnels only connect once you change the LAN IP of the routers so that they are on different subnets. Please let us know if it works.

• Problem with VPN

  I have two problems with IPSEC VPN, using the cisco client, and a third, which I think could answer here if this isn't strictly associated with VPN.

  1. cannot access the internet, while VPN is in place. This can be a problem of client as I * think * I've split tunneling to install correctly.

  2. cannot access other networks except the network associated with the inside interface natively.

  3. I can not ping to the internet from inside, be it on the VPN or not.

  I tend to use the SMDA; Please, if possible, keep the answer to this kindof of entry.

  Here is the config:

  Output of the command: "sh run".

  : Saved

  :

  ASA Version 8.4 (1)

  !

  hostname BVGW

  domain blueVector.com

  activate qWxO.XjLGf3hYkQ1 encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Ethernet0/0

  nameif outside

  security-level 10

  IP 5.29.79.10 255.255.255.248

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 172.17.1.2 255.255.255.0

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  nameif management

  security-level 100

  IP 172.19.1.1 255.255.255.0

  management only

  !

  passive FTP mode

  DNS server-group DefaultDNS

  domain blueVector.com

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  the subject of WiFi network

  172.17.100.0 subnet 255.255.255.0

  WiFi description

  the object to the Interior-net network

  172.17.1.0 subnet 255.255.255.0

  network of the NOSPAM object

  Home 172.17.1.60

  network of the BH2 object

  Home 172.17.1.60

  the EX2 object network

  Home 172.17.1.61

  Description internal Exchange / SMTP outgoing

  the Mail2 object network

  Home 5.29.79.11

  Description Ext EX2

  network of the NETWORK_OBJ_172.17.1.240_28 object

  subnet 172.17.1.240 255.255.255.240

  network of the NETWORK_OBJ_172.17.200.0_24 object

  172.17.200.0 subnet 255.255.255.0

  DM_INLINE_TCP_1 tcp service object-group

  port-object eq www

  EQ object of the https port

  the DM_INLINE_NETWORK_1 object-group network

  network-object BH2

  network-object NOSPAM

  Outside_access_in list extended access permit tcp any eq smtp DM_INLINE_NETWORK_1 object-group

  Outside_access_in list extended access permit tcp any object object-group DM_INLINE_TCP_1 BH2

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  management of MTU 1500

  mask pool local 172.17.1.240 - 172.17.1.250 VPN IP 255.255.255.0

  mask pool local 172.17.200.100 - 172.17.200.200 VPN2 IP 255.255.255.0

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) static source EX2 Mail2

  NAT (inside, outside) static source all all NETWORK_OBJ_172.17.1.240_28 of NETWORK_OBJ_172.17.1.240_28 static destination

  NAT (inside, outside) static source all all NETWORK_OBJ_172.17.200.0_24 of NETWORK_OBJ_172.17.200.0_24 static destination

  NAT (inside, outside) static source to the Interior-NET Interior-net destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28

  !

  the object to the Interior-net network

  NAT (inside, outside) dynamic interface

  network of the NOSPAM object

  NAT (inside, outside) static 5.29.79.12

  Access-group Outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 5.29.79.9 1

  Route inside 10.2.0.0 255.255.255.0 172.17.1.1 1

  Route inside 10.3.0.0 255.255.255.128 172.17.1.1 1

  Route inside 10.10.10.0 255.255.255.0 172.17.1.1 1

  Route inside 172.17.100.0 255.255.255.0 172.17.1.3 1

  Route inside 172.18.1.0 255.255.255.0 172.17.1.1 1

  Route inside 192.168.1.0 255.255.255.0 172.17.1.1 1

  Route inside 192.168.11.0 255.255.255.0 172.17.1.1 1

  Route inside 192.168.30.0 255.255.255.0 172.17.1.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA-server blueVec protocol ldap

  blueVec AAA-server (inside) host 172.17.1.41

  LDAP-base-dn DC = adrs1, DC = net

  LDAP-group-base-dn DC = EIM, DC = net

  LDAP-scope subtree

  LDAP-naming-attribute sAMAccountName

  LDAP-login-password *.

  LDAP-connection-dn CN = Hanna\, Roger, OU = human, or = WPLAdministrator, DC = adrs1, DC = net

  microsoft server type

  Enable http server

  http 192.168.1.0 255.255.255.0 management

  http 172.17.1.0 255.255.255.0 inside

  http 24.32.208.223 255.255.255.255 outside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  card crypto Outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  Outside_map interface card crypto outside

  Crypto ikev1 allow outside

  IKEv1 crypto policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 30

  authentication crack

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 172.17.1.0 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  dhcpd address 172.17.1.100 - 172.17.1.200 inside

  dhcpd 4.2.2.2 dns 8.8.8.8 interface inside

  dhcpd lease interface 100000 inside

  dhcpd adrs1.net area inside interface

  !

  a basic threat threat detection

  threat detection statistics

  a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200

  WebVPN

  internal blueV group policy

  attributes of the strategy of group blueV

  value of server WINS 172.17.1.41

  value of 172.17.1.41 DNS server 172.17.1.42

  Ikev1 VPN-tunnel-Protocol

  value by default-field ADRS1.NET

  internal blueV_1 group policy

  attributes of the strategy of group blueV_1

  value of server WINS 172.17.1.41

  value of 172.17.1.41 DNS server 172.17.1.42

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  adrs1.NET value by default-field

  username gwhitten encrypted password privilege 0 8fLfC1TTV35zytjA

  username gwhitten attributes

  VPN-group-policy blueV

  rparker encrypted FnbvAdOZxk4r40E5 privilege 15 password username

  attributes of username rparker

  VPN-group-policy blueV

  username mhale encrypted password privilege 0 2reWKpsLC5em3o1P

  username mhale attributes

  VPN-group-policy blueV

  VpnUser2 SlHbkDWqPQLgylxJ encrypted privilege 0 username password

  username VpnUser2 attributes

  VPN-group-policy blueV

  Vpnuser3 R6zHxBM9chjqBPHl encrypted privilege 0 username password

  username Vpnuser3 attributes

  VPN-group-policy blueV

  username VpnUser1 encrypted password privilege 0 mLHXwxsjJEIziFgb

  username VpnUser1 attributes

  VPN-group-policy blueV

  username dcoletto encrypted password privilege 0 g53yRiEqpcYkSyYS

  username dcoletto attributes

  VPN-group-policy blueV

  username, password jmcleod aSV6RHsq7Wn/YJ7X encrypted privilege 0

  username jmcleod attributes

  VPN-group-policy blueV

  rhanna encrypted Pd3E3vqnGmV84Ds2 privilege 15 password username

  rhanna attributes username

  VPN-group-policy blueV

  username rheimann encrypted password privilege 0 tHH5ZYDXJ0qKyxnk

  username rheimann attributes

  VPN-group-policy blueV

  username jwoosley encrypted password privilege 0 yBOc8ubzzbeBXmuo

  username jwoosley attributes

  VPN-group-policy blueV

  2DBQVSUbfTBuxC8u encrypted password privilege 0 kdavis username

  kdavis username attributes

  VPN-group-policy blueV

  username mbell encrypted password privilege 0 adskOOsnVPnw6eJD

  username mbell attributes

  VPN-group-policy blueV

  bmiller dpqK9cKk50J7TuPN encrypted password privilege 0 username

  bmiller username attributes

  VPN-group-policy blueV

  type tunnel-group blueV remote access

  tunnel-group blueV General-attributes

  address VPN2 pool

  authentication-server-group blueVec

  Group Policy - by default-blueV_1

  blueV group of tunnel ipsec-attributes

  IKEv1 pre-shablue-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  HPM topN enable

  Cryptochecksum:2491a825fb8a81439a6c80288f33818e

  : end

  Any help is appreciated!

  -Roger

  Hey,.

  Unfortunately, I do not use ASDM myself but will always mention things that could be done.

  You do not split tunneling. All traffic either tunnel to the ASA, while VPN is active

  You have the following line under the "group policy"

  Split-tunnel-policy tunnelspecified

  You will also need this line

  Split-tunnel-network-list value

  Defines the destination for the VPN Client networks. If you go in on the side of the ASDM group policy settings, you should see that no ACL is selected. You don't really seem to have an ACL in the configuration above, for the split tunneling?

  To activate access Internet via the VPN Client now in the current configuration, I would say the following configuration of NAT

  VPN-CLIENT-PAT-SOURCE network object-group

  object-network 172.17.200.0 255.255.255.0

  NAT (outside, outdoor) automatic interface after dynamic source VPN-CLIENT-PAT-SOURCE

  In regards to the traffic does not for other networks, I'm not really sure. I guess they aren't hitting the rule NAT that are configured. I think they should, but I guess they aren't because its does not work

  I could myself try the following configuration of NAT

  object-group, network LAN-NETWORKS

  object-network 10.2.0.0 255.255.255.0

  object-network 10.3.0.0 255.255.255.128

  object-network 10.10.10.0 255.255.255.0

  object-network 172.17.100.0 255.255.255.0

  object-network 172.18.1.0 255.255.255.0

  object-network 192.168.1.0 255.255.255.0

  object-network 192.168.11.0 255.255.255.0

  object-network 192.168.30.0 255.255.255.0

  object-group, network VPN-POOL

  object-network 172.17.200.0 255.255.255.0

  NAT (inside, outside) static static source of destination LAN-LAN-NETWORK VPN-VPN-POOL

  Add ICMP ICMP Inspection

  Policy-map global_policy

  class inspection_default

  inspect the icmp

  or alternatively

  fixup protocol icmp

  This will allow automatically response to ICMP echo messages pass through the firewall. I assume that they are is blocked by the firewall now since you did not previously enable ICMP Inspection.

  -Jouni

• Passed the port, conflict with VPN

  Hello

  I have a WEB SERVER, I want to share, this bellows port forwarding work well:

  I mean by that:

  The WEB SERVER is 192.168.10.10 on the local network and on the WEB, it's 81.83.XX. YY:8095

  When I try that it works with VPN ON or OFF.

  If I make a VPN TUNNEL, the link above and still work, but I can't see it in its original address: 192.168.10.10

  Here below a small part of the original manuscript and half of the solution:

  IP nat inside source static tcp 192.168.10.68 5800 interface FastEthernet0/0 5800

  overload of IP nat inside source list 170 interface FastEthernet0/0

  IP nat inside source static tcp 192.168.10.10 80 interface FastEthernet0/0 8095

  IP nat inside source static tcp 192.168.10.68 5900 interface FastEthernet0/0 5900

  overload of IP nat inside source list interface FastEthernet0/0.245 NAT1

  !

  access-list 150 permit ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 170 refuse ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 170 permit ip 192.168.10.0 0.0.0.255 any

  SOLUTION:
  With this I can access my server VIA VPN, but because of that I removed the forwarded port, the 81.83.XX. YY:8095 no longer works.
  No idea if I can do something in an ACL?
  IP nat inside source static tcp 192.168.10.68 5800 interface FastEthernet0/0 5800

  overload of IP nat inside source list 170 interface FastEthernet0/0

  IP nat inside source static tcp 192.168.10.10 80 interface FastEthernet0/0 8095

  IP nat inside source static tcp 192.168.10.68 5900 interface FastEthernet0/0 5900

  overload of IP nat inside source list interface FastEthernet0/0.245 NAT1

  !

  access-list 150 permit ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 170 refuse ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 170 permit ip 192.168.10.0 0.0.0.255 any

  Best regards

  Didier

  Didier,

  I'm sorry for the delay!

  I'll try to help you with this issue until he gets is resolved :-)

  Now... Certainly, I think that the best solution is to have a static IP address so that we can fill with a roadmap, which is an option?

  Federico.

• PIX501 customer VPN - cannot access inside the network with VPN Session

  What follows is based on the config on the attached link:

  http://www.Cisco.com/en/us/Partner/Tech/tk583/TK372/technologies_configuration_example09186a008009442e.shtml

  PIX Ver 6.2 (3) - VPN Client 3.3.6(A) - Windows XP Client PC

  We can establish the VPN to the PIX501 session, but we cannot access the network private behind the pix.

  Here is the config - I can't determine why it does not work, we are desperate to get there as soon as POSSIBLE!

  We have the same problem with the customer 4.0.3(c)

  Thanks in advance for any help!

  =======================================

  AKCPIX00 # sh run

  : Saved

  :

  6.2 (3) version PIX

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  hostname AKCPIX00

  domain.com domain name

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol sip 5060

  fixup protocol 2000 skinny

  fixup protocol sip udp 5060

  names of

  access-list 101 permit ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0

  pager lines 24

  interface ethernet0 10baset

  interface ethernet1 10full

  Outside 1500 MTU

  Within 1500 MTU

  external IP address #. #. #. # 255.255.240.0

  IP address inside 192.168.1.5 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool akcpool 10.0.0.1 - 10.0.0.10

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  (Inside) NAT 0-list of access 101

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Route outside 0.0.0.0 0.0.0.0 #. #. #. # 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  No sysopt route dnat

  Crypto ipsec transform-set esp - esp-md5-hmac RIGHT

  Crypto-map dynamic dynmap 10 transform-set RIGHT

  map mymap 10-isakmp ipsec crypto dynamic dynmap

  mymap outside crypto map interface

  ISAKMP allows outside

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup address akcpool pool akcgroup

  vpngroup dns 192.168.1.10 Server akcgroup

  vpngroup akcgroup by default-domain domain.com

  vpngroup split tunnel 101 akcgroup

  vpngroup idle 1800 akcgroup-time

  vpngroup password akcgroup *.

  vpngroup idle 1800 akc-time

  Telnet timeout 5

  SSH #. #. #. # 255.255.255.255 outside

  SSH timeout 15

  dhcpd address 192.168.1.100 - 192.168.1.130 inside

  dhcpd dns 192.168.1.10

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd allow inside

  Terminal width 80

  Cryptochecksum:XXXXX

  : end

  AKCPIX00 #.

  Config looks good - just as domestic mine to my local network. The only thing I can think is that you may have entered commands in the wrong order - which means, you could have isakmp or encryption before the config map was complete. Write memory, then reloading the pix is a way to reset everything. If you do not want downtime:

  mymap outside crypto map interface

  ISAKMP allows outside

  Enter these two commands should be enough to reset the ipsec and isakmp.

• VPN Site to Site Secret shared and can co-exist RADIUS authenticated VPN?

  Hello

  I have a setup VPN site to site between two offices on 515Es PIX (v.6.2 software) and has recently added a vpngroup/shared secret based VPN remote access to one of the offices. Given that just forced me to add a number of different policies to my existing crypto card, it was a plant direct and easily implemented. For more security, I want to use a RADIUS server to give to each remote user their own connections and profiles rather than a group on all password is configured. To do this, however, it seems that I have to add the following additional commands to my existing crypto card:

  client configuration address map mymap crypto initiate

  client card crypto mymap RADIUS authentication

  These do not correspond to the policy number (my site-to-site is 10, and remote access policy is political 20), so I don't know what the effect would be if I added the. It would cause my connection from site to site for authentication RADIUS request (a very bad thing)? If so, do I need another interface to bind a new encryption card to? The answer to this would be greatly appreciated!

  Also, if anyone knows an example configuration for a similar configuration, I can look at, please let me know! Thank you.

  -A.Hsu

  For the site to site connection, you change line isakmp keys and add the parameters of "No.-xauth No.-config-mode" at the end of this one, which tells the PIX not to do the auth RADIUS or assign an IP address, etc. for the specific site-to-site tunnel.

  Example of config is here:

  http://www.Cisco.com/warp/public/110/37.html

  Note that there is no command options I have just said, I just sent an email to the web guys to fix this. Basically, your config will look with the options "No.-xauth No.-config-mode" on the line «isakmp x.x.x.x key...» "for LAN-to-LAN tunnel.

• Unable to access an internal network while being connected with VPN

  Hello

  We have a PIX 515E with a remote access vpn.

  Our internal network has an address network 192.168.1.0/24, and addresses we assign to vpn clients are 192.168.1.49 - 192.168.1.62, or 192.168.1.48/28.

  When I connect to the vpn, I cannot ping none of my hosts internal. The error I get is "no group of translation not found for icmp src:...» »

  It is quite clear that I would need a NAT rule, but why? Addresses are in the same network...

  Could someone enlighten me on how I should proceed to nat traffic between vpn clients and the internal network?

  Thank you.

  Here is my current setup:

  6.3 (1) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  Auto interface ethernet2

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  nameif dmz security50 ethernet2

  activate the password * encrypted

  passwd * encrypted

  hostname pix

  domain callio.com

  outside_inbound list access permit tcp any host 66 *. **. * eq www

  outside_inbound list access permit tcp any host 66 *. **. * eq https

  outside_inbound list of access permit udp any host 66 *. **. * Log domain eq

  outside_inbound list access permit tcp any host 66 *. **. * Log domain eq

  outside_inbound list access permit tcp any host 66 *. **. * object-group mailserver

  outside_inbound list access permit tcp any host 66 *. **. * Newspaper ftp object-group 5

  outside_inbound list access permit tcp any host 66 *. **. * eq 9999 journal 5

  outside_inbound list access permit tcp any host 66 *. **. * eq www

  outside_inbound list access permit tcp any host 66 *. **. * eq www

  access-list outside_inbound udp host 66 license *. **. * Welcome 66 *. **. * eq syslog

  outside_inbound deny ip access list a whole

  pager lines 24

  IP address outside 66 *. **. * 255.255.255.240

  IP address inside 192.168.1.1 255.255.255.0

  IP dmz 192.168.2.1 255.255.255.0

  IP verify reverse path to the outside interface

  local pool IP VPN-RemoteAccess 192.168.1.49 - 192.168.1.62

  ARP timeout 14400

  Global (outside) 10 66 *. **. * netmask 255.255.255.0

  NAT (inside) 0-list of access no_nat_dmz

  NAT (inside) 10 192.168.1.0 255.255.255.0 0 0

  static (dmz, outside) 66 *. **. * c4 netmask 255.255.255.255 0 0

  static (dmz, outside) 66 *. **. * 192.168.2.3 netmask 255.255.255.255 0 0

  static (dmz, outside) 66 *. **. * 192.168.2.5 netmask 255.255.255.255 0 0

  static (dmz, outside) 66 *. **. * 192.168.2.6 netmask 255.255.255.255 0 0

  static (dmz, outside) 66 *. **. * 192.168.2.100 netmask 255.255.255.255 0 0

  static (inside, dmz) 192.168.1.0 192.168.1.0 netmask 255.255.255.0 0 0

  Access-group outside_inbound in interface outside

  Route outside 0.0.0.0 0.0.0.0 66 *. **. * 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  NTP server 199.212.17.15 source outdoors

  Enable http server

  http 192.168.1.101 255.255.255.255 inside

  http 192.168.1.105 255.255.255.255 inside

  SNMP-server host inside 192.168.1.105

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Sysopt connection permit-pptp

  Telnet timeout 5

  SSH 192.168.1.105 255.255.255.255 inside

  SSH timeout 5

  Console timeout 0

  VPDN PPTP VPN group accept dialin pptp

  VPDN group VPN-PPTP ppp mschap authentication

  VPDN group VPN-PPTP ppp mppe auto encryption required

  the client configuration address local VPN-RemoteAccess VPDN group PPTP VPN

  VPDN group VPN-PPTP client configuration dns 192.168.1.2

  VPDN group VPN-PPTP pptp echo 60

  authentication of VPN-PPTP client to the Group local VPDN

  VPDN username someuser password *.

  VPDN allow outside

  Terminal width 80

  Please use the following URL to check your config:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml

  I hope this helps.

  Jay

• Create different group with VPN remote access

  Hello world

  The last time, I ve put in place a VPN for remote access to my network with ASA 5510

  I ve access to all my internal LAn helped with my VPN

  But I want to set up a vpn group in the CLI for a different group of the user who accesses the different server or a different network on my local network.

  Example: computer group - access to 10.70.5.X network

  Group consultant network - access to 10.70.10.X

  I need to know how I can do this, and if you can give me some example script to complete this

  Here is my configuration:

  ASA Version 8.0 (2)
  !
  ASA-Vidrul host name
  vidrul domain name - ao.com
  activate 8Ry2YjIyt7RRXU24 encrypted password
  names of
  DNS-guard
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  address IP X.X.X.X 255.255.255.X
  !
  interface Ethernet0/1
  nameif inside
  security-level 100
  address IP X.X.X.X 255.255.255.X
  !
  interface Ethernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Description Port_Device_Management
  nameif management
  security-level 99
  address IP X.X.X.X 255.255.255.X
  management only
  !
  2KFQnbNIdI.2KYOU encrypted passwd
  passive FTP mode
  DNS server-group DefaultDNS
  vidrul domain name - ao.com
  access-list 100 scope ip allow a whole
  access-list extended 100 permit icmp any any echo
  access-list extended 100 permit icmp any any echo response
  vpn-vidrul_splitTunnelAcl permit 10.70.1.0 access list standard 255.255.255.0
  vpn-vidrul_splitTunnelAcl permit 10.70.99.0 access list standard 255.255.255.0
  inside_nat0_outbound list of allowed ip extended access all 10.70.255.0 255.255.255.0
  pager lines 24
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 management
  IP local pool clientvpngroup 10.70.255.100 - 10.70.255.200 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 602.bin
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 10.70.0.0 255.255.0.0
  Access-group 100 in the interface inside
  Access-group 100 interface inside

  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout, uauth 0:05:00 absolute
  dynamic-access-policy-registration DfltAccessPolicy
  Protocol RADIUS AAA-server 10.70.99.10
  AAA authentication enable LOCAL console
  the ssh LOCAL console AAA authentication
  LOCAL AAA authorization command
  Enable http server
  http 192.168.1.2 255.255.255.255 management
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
  SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  the Encryption
  md5 hash
  Group 2
  life 86400
  Crypto isakmp nat-traversal 30
  Telnet 0.0.0.0 0.0.0.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  outside access management
  dhcpd manage 192.168.1.2 - 192.168.1.5
  dhcpd enable management
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  !
  class-map inspection_default
  match default-inspection-traffic
  block-url-class of the class-map
  class-map imblock
  match any
  class-map P2P
  game port tcp eq www
  !
  !
  type of policy-card inspect dns migrated_dns_map_1
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the migrated_dns_map_1 dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  Policy-map IM_P2P
  class imblock
  class P2P
  !
  global service-policy global_policy
  vpn-vidrul group policy internal
  vpn-vidrul group policy attributes
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value vpn-vidrul_splitTunnelAcl
  value by default-field vidrul - ao.com
  test 274Y4GRAbNElaCoV of encrypted password privilege 0 username
  username admin privilege 15 encrypted password bTpUzgLxalekyhxQ
  attributes of user admin name
  Strategy-Group-VPN-vpn-vidrul
  username, password suporte zjQEaX/fm0NjEp4k encrypted privilege 15
  type tunnel-group vidrul-vpn remote access
  vpn-vidrul general-attributes tunnel-group
  address clientvpngroup pool
  Group Policy - by default-vpn-vidrul
  IPSec-vpn-vidrul tunnel group attributes
  pre-shared-key *.
  context of prompt hostname
  Cryptochecksum:d84e64c87cc5b263c84567e22400591c
  : end

  What you need to configure is to imitate the configuration on the tunnel-group and group strategy and to configure access to specific network you need.

  Currently, you have configured the following:

  vpn-vidrul group policy internal
  vpn-vidrul group policy attributes
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value vpn-vidrul_splitTunnelAcl
  value by default-field vidrul - ao.com

  type tunnel-group vidrul-vpn remote access
  vpn-vidrul general-attributes tunnel-group
  address clientvpngroup pool
  Group Policy - by default-vpn-vidrul
  IPSec-vpn-vidrul tunnel group attributes
  pre-shared-key *.

  What you need is to create new group policy and the new tunnel-group and configure the tunnel split ACL to allow access to specific access required.

  The user must then connect with the new group name and the new pre-shared key (password).

  Hope that helps.

• How to increase the speed of work and avoid the "Server timeouts" with VPN and?

  Hello!

  I am faced with slow work and delays in Thunderbird to my Linux.

  I have 4 accounts (3 are connected via IMAP) and two of them runs very slowly. Fear that every time I see annoying message at end of the period of the server and each message (same old) opens very slowly and sometimes doesn't open.

  It maybe the problem in services postal themselves, or illustrated by the 4th account is Exchange (which work much faster in fact), but I need to manage that somehow. I think I had a fast enough internet connection.

  I know that the server timeout could be increased, but I have not found this option in the settings. I have 31 TB, and all the settings, I found in Google seems to be linked to the old version with the old interfaces. I went to advanced settings, I'm not sure that it's settings and what value it must contain.

  In addition, has something like 'caching 'mail TB? I mean, during the reception of the new letter - it is "cached" locally, so when I try to read - local version is used until "cache" is cleaned. But when I delete or move the letter to another folder - happening also at the level of the server. I think that if TB could sync all mails and store their values locally this will work much faster.

  Thanks for any possible solution to this.

  It seems to me that I found the root cause of the problem)

  Problem is not in TB, but in these 2 mail services itself. They work poorly when vpn works.

  Will address this issue for messaging services.

• Drive mapping shared with VPN access

  I'm the only person in our company (small) with a Mac and I work remotely. I consulted my company using Network Connect VPN successfully.

  I'm now trying to map the shared drive.

  Under "OK" > "Connect to Server" I entered the address of the server ("smb: / /...") (' etc.) because it has been given to me. When I click on connect I get an error "there was a problem connecting to the server '[server address]'. The server may not exist or it is not available at this time. Check the server name or IP address, check your network connection and then try again. »

  I tried a number of variations of the server address - none worked.

  In the Finder, under the heading "Shared Disks", all I can see is an empty folder "servers".

  When I'm on wifi office internal society, we were able to map the drive. But nothing has worked so far not remotely, remotely.

  Can anyone suggest a solution?

  I solved my problem. I needed to use the IP address of the server, not the full smb: / / URL etc.