C3180 bought US prepare for cartridges NL 92/93 > 336/342

Similar Questions

• I have a deskjet 1000 and bought the HP 61 cartridge.

  I have a deskjet 1000 and bought the HP 61 cartridge. The deskjet printer came with 122 HP cartridges.  I tried to install the HP 61 cartridge but the message is "incompatible cartridge".

  Hello

  You must use #122 cartridges, I know 61 = 122/2 but this is not the case. Please go to the shop and ask for a replacement.

  Kind regards.

• Error of gear in preparation for the recovery

  I bought a recovery disc for my Pavilion m6-1035dx entertainment pc and I got 4 disks. I put in disc 1 and he started. He stopped at 29% on preparations for recovery with an error. It is said

  Reducer
  Copy the file fails
  From: G: \PRELOAD\BASE21SWM
  To: C:\RM\Image\BASE21. STORMWATER MANAGEMENT

  Press OK to retry.

  I press OK and it comes right back.
  How to spend it?

  If the DST Long failled. I'm sure that my warranty has expired. Hard drives are expensive? I'm a little angry because I bought a recovery disk I have need lol

• Time Machine is constantly preparing for backup.

  I use my iOmega external hard drive to back up my Mac Pro for the past 5 years.  Now, all of a sudden, he is constantly preparing for backup.  Any suggestion of back me to normal will be appreciated.

  Try:

  http://pondini.org/TM/D1.html

  Stuck in the "Preparation" or "calculating the change."

• How should I prepare for El Capitan 10.11.2?

  Hi all

  As the title asks, how should I prepare for this upgrade?

  I had already installed El Capitan 10.11.0, but quickly returned to 10.10.5 after discovering several problems:

  1 (2 x 1 x POP, IMAP) e-mail accounts - problems with lack of mailboxes, mail lost, unable to send mail, etc.

  2. Time Machine backups were not held as scheduled when my iMac end of 2013 has been plugged into my ups APC.

  3. casual does not recognize my USB Superdrive.

  After the restoration of my old system of Time Machine, I followed several thread on these forums to see what others have experienced with the 10.11.2 release.

  My iMac does not have any third-party software with the exception of my HP ENVY 4502 print utility.

  How should other ensuring that Time Machine backs up current, I prepare for this facility to ensure that I do not lose important emails from my accounts {2 x iCould (IMAP) and Comcast (POP3) 1 x}?

  You know, honestly until that Apple's software team act together and reflection on the QUALITY rather than pretty flowers I'd wait for a few weeks to a month.  Or, at least until more people have put to date to see if there are problems.

  So, to answer your question, make sure you have at least 2 strong BACKUPS before you update.

• How the 'registration' identity can be removed when a computer prepares for recycling?

  How the 'registration' identity can be removed when a computer prepares for recycling?  I'll give my old PC for a facility that reconditions them.  I removed almost everything that could lead to my identity used but I've not found a way to change or remove the name that the software is registered.   Any ideas?   Also how hard disk would be restructured uning windows home?

  Boot from your WIndows installation CD-ROM.  You will be able to erase the hard drive from there.

• I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?

  I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?

  Unfortunately, Halo 2 does support Windows Vista and more.  Windows XP is not supported.  There may be 3 party hacks that can make it work, but they are not taken in charge and potentially dangerous.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Windows install... Preparation for installation

  I can't open my documents, Word or Excel... with a pop-up box saying Windows Installer... preparing for installation.

  So of course nothing happens...

  then another pop up box says... This patch Package could not be opened.

                                                         Verify that the hotfix package excists and you can access them

                                                         or contact the application vendor to verify that this is a valid Windows Installer patch package.

  I hope someone can help with advice and or a link to help me solve this problem, because it drives me crazy.

  Looking forward to responses and I hope to get this problem fixed.

  Salvation is n,.
   
  Follow the steps listed in this article to resolve the problem:
  You receive an error message when you try to install or run an Office program: "this patch package could not be opened" or "the installation source for the product is not available.

• Every time I open a file in Media Player 11, I get a dialog box telling me that Windows Installer is "preparation for installation.

  Whenever I open a file in Microsoft Media Player 11, (11.0.5721.5280) I get a dialog box telling me that Windows Installer is "preparation for installation.

  He tell me what it is trying to install and crashes

  No media plays back.

  Cancellation does not - it retrys with encouraging them. The only way to get rid of the dialogue is Ctrl/Alt/Del and end task. It also closes WMP11

  SP3 Win XP32

  I just installed Office 10

  I ran the repair of Office 10

  I uninstalled WMP11 and reinstalled

  I ran "Fix IT" page Support MS

  I run MS Security Essentials... It is to this day and I run a full scan

  I think you meant:

  "a. initially, box run, type"msiexec /unreg", and then press ENTER."

  I did and it helped somewhat. Message anyway, but he went and the media played.

  If I did:

  "(b) then type" msiexec/regserver"and press ENTER."

  The problem comes back

  I went a step further and ran a restoration of the system to the day, I installed Office - it worked.

• I have windows xp and whenever I click on Installer Windows icon comes out and says it: preparation for the installation and it takes a while to come

  I have windows xp and whenever I click on an installer of winows icon comes out and says it: preparation for the installation and it takes a while to come

  Hi DanBourque

   

  1 does the problem occur when you click the icon of the exe file or any application shortcut icon as well?
  2. for how long have you been faced with this problem?

  3. did you of recent changes on the computer?

   

  You can re-register Windows Installer and check if this helps-
  a. Quit all Windows programs.
  b. click Start, click run, type msiexec /Unregister in the Open box and then click OK.
  c. click Start, click run, type msiexec/regserver in the Open box and then click OK.
  d. restart your computer.

  I hope this helps.

• MSI - preparation for installation message appears when Internet Explorer is opened

  Original title: windows setup

  whenever I have open internet explorer, a small 'windows install... preparation for installing' window.  I downloa ded windows install 4.5, but no abail. Any suggestions would be greatly appeciated. Thank you. Ric

  Hello

  ·        This occurs only when you click on internet explore or with all applications?

  ·        Remember to make changes to the system?

  ·        What version of internet explore is installed on the system?

  I suggest you follow the methods mentioned below.

   

  Method 1:

  I suggest you unregister and re-register the Windows Installer on the system.

  a. sign in to your computer as an administrator.

  b. Click Start and then click Run.

  (c) in the Open box, type cmd and then click OK.

  d. at the command prompt, type msiexec.exe / unregister and then press ENTER.

  e. type msiexec/regserver, and then press ENTER.

  Now, check if the problem is resolved.

  Method 2:

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.

  http://support.Microsoft.com/kb/322756

   

  I suggest you repair Windows Installer

  a. Click Start, go to run, type "Regedit" and press ENTER.

  b. in the registry editor, navigate to the following registry folder:

  'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer' by clicking on the sign MORE (+) sign.

  c. highlight the "MSIServer" folder in the left pane and double-click "ImagePath" on the item in the right pane.

  d. its value should be 'C:\Windows\System32\msiexec.exe V' (without the quotes). If this is not the case, change the above value.

  Note: There is a space between msiexec.exe and c I assume that Windows is installed on drive C.

  e. restart your computer.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Preparation for installation at each connection, but what?

  Windows XP Pro with SP3, stable for years.

  But now since one some time to Setup tries to install 'something' after the connection very. The "preparation for installation" prompt appears, unfortunately, never says what it is trying to install, as I know that it takes 30 sec suspended in this popup, appearing 3 - 4 times in a row each whenever I have connection. And no 'usual remedy' has contributed to this day:

  (1) check for product Red
  (2) regedit, search for the names of products already installed.
  (3) analysis of the registry: all deleted using WiseRegistryCheck and CCleaners as well.
  (4) windows install cleanup tool v3.00.00.0000: I don't see all of the unknown elements...
  (5) manual cleaning of all TEMP directories and all these.
  (6) the manual analysis of services for unknown names
  (7) viruas scan and adware

  Could someone help me identify the culprit?
  Under settings, I still find a plethora of log files in the directory temp, like this:

  = Recording started: 2009-10-28 17:34:09 Build type: SHIP UNICODE 3.01.4001.5512 appeal process: C:\PROGRA~1\COMMON~1\INSTAL~1\UPDATE~1\agent.exe =.
  MSI (c) (3:7 C) [17:34:09:453]: Resetting cached policy values
  MSI (c) (3:7 C) [17:34:09:453]: value of strategy Machine 'Debug' is 0
  MSI (c) (3:7 C) [17:34:09:453]: * RunEngine:
  Product: {39717325-70B0-4965-AE41-D24F78EC69B5}
  Action:
  Command line:
  MSI (c) (3:7 C) [17:34:09:453]: Client and UI is none or basic: full installation running on the server.
  MSI (c) (3:7 C) [17:34:09:453]: grabbed execution mutex.
  MSI (c) (3:7 C) [17:34:09:453]: Cloaking enabled.
  MSI (c) (3:7 C) [17:34:09:453]: attempt of activation of all disabled priveleges before calling install on server
  MSI (c) (3:7 C) [17:34:09:453]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (14:A0) [17:34:09:453]: grabbed execution mutex.
  MSI (s) (14:84) [17:34:09:453]: Resetting cached policy values
  MSI (s) (14:84) [17:34:09:453]: value of strategy Machine 'Debug' is 0
  MSI (s) (14:84) [17:34:09:453]: * RunEngine:
  Product: {39717325-70B0-4965-AE41-D24F78EC69B5}
  Action:
  Command line:
  MSI (s) (14:84) [17:34:09:453]: value of strategy Machine 'DisableUserInstalls' is 0
  MSI (s) (14:84) [17:34:09:453]: MainEngineThread returns 1605
  MSI (c) (3:7 C) [17:34:09:453]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (c) (3:7 C) [17:34:09:453]: MainEngineThread returns 1605
  = Recording stopped: 2009-10-28 17:34:09 =.

  This agent.exe is Macrovision. Another example is:

  = Recording started: 2009-10-28 17:34:04 Build type: SHIP UNICODE 3.01.4001.5512 appeal process: C:\Program Files\Common Files\InstallShield\UpdateService\isuspm.exe =.
  ... etc.

  However, this seems to be a check once a week for updates for several products supplied with my Dell. So I'm still confused why this is happening now and how to turn it off.

  Thomas, CA

  Thomas,
  Looks like you did a lot to try to find the culprit.  One thing that I do not see you mention performs a clean boot.  If you haven't tried that I implement that and then restart and see if Setup returns to the top.

  Follow the steps in this article to resolve problems with a clean boot.

  Advanced problem resolution by clean restart.

  Let me know if this helps.  Also have you looked in the Application section in the event viewer and saw all errors related to this?

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• device disappeared from the system without first be prepared for removal. __

  The following error message has appeard in the event where the journal and I can't find my wireless network device. Driver has been reinstalled with no success. This means that the material is not? Error message is:

  The device "LAN-Express AS IEEE 802.11 g PCI-E adapt ' (PCI\VEN_168C & DEV_001C & SUBSYS_E000105B & REV_01\4 & d69bda5 & 0 & 00E2) disappeared from the system without first be prepared for removal."

  
  

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  See you soon.

  Mick Murphy - Microsoft partner

• I have an Acer computer I want to do a total restore. It came with windows 7 starter edition, and then I bought Microsoft word for it. If Microsoft word will lose if I do the restoration?

  I have an Acer computer I want to do a total restore. It came with windows 7 starter edition, and then I bought Microsoft word for it. If Microsoft word will lose if I do the restoration?

  If you purchased Word on CD, it's no big deal; just reinstall it after the factory restore. If it was bought online, copy the file downloaded to a CD and then reinstall it later.

  Is there a particular reason, why you want to do a restore complete? Have you problems? If so, you can try asking here on how to fix them and do not have to do a restore, reinstall all your programs and all of the updates and service pack 1.

  SC Tom

• HP mini computer with win 7 - Message = "preparing for first use." A loop.

  It is a HP mini 110 with win 7.  and original Label and number below

  Start-up display "preparing for first use."

  Then "could not complete the installation.

  Then disconnects and reboots.

  Tried to access the drive with a usb stick and "rufus" s/w. can enter the machine but I can only see c:\ drive with access to BACK of rufus. Tried several ways to see the internal drive of the machine to correct the problem without success.

  Tried MS 'diskpart', no other player found.

  I need commands to work on the machine of my bootable usb key. 5 hours in this now.

  Thank you for your attention, Rich

  The machine is now out of my hands and the owner had supported for $40.  by someone who is a little more knowledge than I have.

  Thank you for your response.