C4180 installation for win 7

Similar Questions

• Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

  Hello!
  I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
  I do the following:

  1. install Windows 7 x 64 SP1.
  2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
  3. install all updates of Microsoft Windows
  4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.

  Here is the log for the first test (win7update.log) file:

  12\28\2011 update started at 21:11
  TVALZ_O.inf installed
  E/s installed & memory access driver
  driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
  util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
  Updated at 21:29

  After the restart I've run it again and the result is:

  12\28\2011 update started at 21:38
  Toshiba Bluetooth stack has already been installed.
  Toshiba value added package has already been installed.
  Updated at 21:40

  Any help is appreciated!
  Thanks in advance!

  Stand by.
  What are you doing exactly?
  You try to install own OS?

• MUSTEK 1248UB Scanner - correct Installer for Win 7

  For installation of Windows 7, only download the http://www.mustek.com.tw/Support/ driver as other sites have an older, incompatible driver.  You should find that the driver is about 25 MB and is dated in 2008 and is v1.2.  You also need to install in compatibility mode against Vista, like their other older installers, they recognize the operating system and install everything except the key driver files blindly.

  Hello

  We appreciate that you have provided valuable information. Your answer will help others. For any problem with Windows, you can still post to the same forum.

• error eok_1va1ue_adjust on PS CC installation for Win 7

  After installing and starting CC PS, I have 13 boxes of error saying "CLC.exe has stopped working" and the box below says eok_1va1ue_adjust and repeat 12 times to appear. PS works but there is no welcome screen. any ideas? Windows 7 64-bit.

  Mark David Vinay Product Support specialist said it was an OPENGL problem and turned it off in the preferences in PS CC and everything works fine now. Thanks Mark!

• I try to install a Lightroom 6 from a cd in windows 7. But the installer say dose not fit for win vista. How I can install it?

  I try to install a Lightroom 6 from a cd in windows 7. But the installer say dose not fit for win vista. How I can install it?

  Copy the installation files to a desktop directory, right-click on the Setup > click on the compatibility mode > win 7.

• Satellite C650D - driver graphics card for Win XP

  Hi all

  I deleted my newly bought laptop Windows 7
  Mainly because I'm very comfortable with XP and don't want anything too flashy with RAM

  Now, I installed XP and all the drivers are good with the exception of the video
  It doesn't seem to be a compatible video driver for Win XP and although I found 1 somewhere on the net the mobile installs it and then nothing happens... Center of how ATI catylist or something...

  Any suggestions?

  Thank you kindly

  Jonathan

  Hello

  On the European driver Toshiba page I could find a driver for graphics card for Satellite C650D
  [ATi Display Driver v8.723.2 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 5388 & selSh ortMod = 984 & language = 13 & selOS = all & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 76170 & OSI D = 10 & driverLanguage = 42]

  I recommend you this driver.

• Satellite M100-180: where can I find drivers for Win 2003 Server?

  We bought a Microsoft Windows 2003 server. I have install then on our laptop Toshiba Satellite M100-180 PSMA1E-02Q00WRU.

  With the laptop, I found Windows XP CD and Express media player recovery CD Reanimator. No disc drivers there. May be dealer lost drivers disk? If that - where can I get new CD of drivers (I am from Russia, Smolensk)

  I try to download the drivers from the web (toshiba.com.ru), but they are very large (I have a dial-up internet). Then I download driver modem (4M). Installation of the works, but no modem appear after that. And no serial port too.

  I plug the USB-serial converter and install Standart Modem (USR external). Then I have to connect to the internet and try to download the drivers with windows update. No results...

  HEEEEEEELP ME! :)

  PS Sorry for my English :)

  Hello

  : D the dealer nothing lost! The pilot tools & utilities can be created in the Windows XP operating system that came with the laptop.
  With the help of Toshiba, you will find a Protect & Fix tab and the option to create a driver disk ;)

  Further, all the XP drivers are placed on the page of the Toshiba driver. But unfortunately, nothing for Win 2003 server.
  Maybe test it works for XP drivers also on Server 2003

  To find the driver download page please go to
  http://EU.computers.Toshiba-Europe.com->-> support-> suport homepage & Downloads Download drivers

• Question about the installation of Win XP on Satellite Pro P200

  Hello

  I have a lot of problems with Vista. First it took me a week to install my printer WiFi. (sollution: install local lpt1 as the printer, change port properties en gives a location network (computer/printername).)
  Last problem: vista give no right to copy my USB hd protable with xp files.

  Finally, I lost all hope and want to go back to xp.

  Is there anyone with experience in the installation of win xp on this laptop. And is it possible to tell me the steps that you have been taken to do so.
  Are there concerns as none have some drivers, things that do not work or problems with sata hd.

  Thank you

  Luke

  Hello

  It's a difficult topic-> XP on Vista machines.

  First: Yes, you can install XP on it because all the important factors are available (VGA, SATA, wireless, XP BIOS, BLUETOOTH) and that should be enough.

  Because your computer has a BIOS for Vista (I guess there a) Please install the BIOS XP first and then start the installation of XP. In the case that your HARD drive is not recognized then you need to install the SATA driver during the installation of windows XP. The procedure is described in the statement of the Satellite L40-> XP installation, so if you want to install and problems SATA (HDD, not during the XP installation), you must check the installation instructions for Windows XP for a SATELLITE L40!

  If you have additional questions, I recommend allows you to place your question here before doing something that may stop your nerves later. :)

  Welcome them

• Compaq 610: [Compaq 610, P/N: NX550EA #ACB] latest driver for the SATA AHCI for Win 7 PRO SP1 RUS x 64 controller.

  Hello world!

  Could someone, please, tell me, why there is no driver SATA AHCI controller for Compaq 610 for Win 7 PRO SP1 RUS x 64 in the download section of HP support for Compaq 610?

  (01) where can I get the latest version of the SATA AHCI controller driver for Compaq 610 for Win 7 PRO SP1 RUS x 64?

  (02) the original Intel (r) Matrix Storage Manager V8.9.0. 1023 will replace the ' Standart controller SATA AHCI 1.0 (Microsoft) "(v. 21.06.2006 6.1.7601.18231) with the more recent/latest version?

  (03) will be the upgrade of the SATA AHCI driver improve the speed of read/write of my any percentage HARD drives or this idea is nonsense and absolutely useless?

  I'll be very grateful for any useful info! Respectfully, Tianuchka))

  Hello:

  I would use it to HP... the description tells you what it does.

  The HP 6910P has the same controller and chipset as the 610 HP.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3357379 & swItemId = ob_85204_3 & swEnvOid = 4059 #tab1

  Who answers your questions first 2.

  Regarding the 3rd, I don't know whether or not you notice an improvement.

  If you want to update the driver, you can also install the last utility Intel chipset installation from the link below.

  Download, unzip and run the setup.exe file.  Then restart the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format

• Re: Portege Z830-11J: Intel AMT/drivers and ME Interface drivers for Win 8

  Hello

  I tried to install the divers of the AMT.

  But the installation fails, it does not find any interface of the amt.

  should what version of driver I use?

  Hello

  Have you found a driver Intel AMT for Win 7?
  It is available on the page of the driver Toshiba UE (Active Management Technology)
  As far as I know most of the Intel Win 7 drivers are compatible with Win 8.

• Installation of Win 7 RC on HP Pavilion DV6-1130sa

  I have the following questions regarding the installation of Win 7. The disc is currently containing the Vista partition and the recovery partition. I want to install then I 7 RC as a new installation on drive C with the possibility to go back to Vista if you need and have the laptop works on the original factory configuration.

  (1) if I do a fresh install of Windows 7 on the hard drive with Vista Home pre. 32 bits (including the recovery partition), the recovery partition will stop working (IE from the trunk F11 option included)?

  (2) if the recovery partition does not work afterwards, if I use my restore dvd copy I ve created, it will create the restore disk partition hard like it was form the factory? and let me go back to vista home Prem

  Please let me know if there is anyone out there who have tried the above with their HP laptops.

  Thank you for your time to help me.

  Ruwsoft

  Hello

  First make the Vista backup. How all the information here.

  (1) If you leave parition your recovery there is work.

  (2) so it does not restore partition, it will automatically recover your system.

  You might also be interested in dual boot.

  This way you will have the possibility to use the two system on a laptop computer.

  How dual boot Windows Vista and Windows 7 (Vista installed first) information here

• How to pass the Satellite P300-1EI for Win XP

  Hello

  I just bought the P300-1EI Satellite with windows Vista Premium (32 bit), and I'm trying to downgrade it XP OS.
  Is there a guide how to do this or at least where can I get the drivers (graphics and webcam...) full xp for this laptop.

  Thank you.

  Hello

  You need a guide how to install XP?
  Well my friend, if you need this guide then I recommend reading some threads here in the forum on the installation of Win XP on the new series of laptop as P300, A300, L300, etc...
  There are hundreds, son of nay, thousands on this theme! Search, read and learn

  Satellite P300-1EI seems PSPCCE series and released all the XP drivers for this laptop.
  Just check the European driver from Toshiba site.

  A hint; You must include the SATA drivers.

  Welcome them

• Satellite L650D - need drivers for Win server 2008

  Laptop model: Satellite L650D-PSK1SA-03E014

  before that I installed win7 32 bit OS.

  Now I want to change to 64-bit, but he says still no startup disk after the completion of copy and restart.
  I use the recovery disk that I burned after that I bought and used the System Restore Wizard.

  So I decide to install win Server 2008 r2 64-bit, installation is successful, but some hardware drivers can be find and install from the Web site.
  (I use win7 64-bit drivers, I read online, a guy said that it works on his laptop, but do not know why it does not work for me.)

  should I take the laptop to the support center and ask them to install the drivers for me?
  I'm not sure that this service is covered by the warranty or not.

  Or I can ask them to install win7 64 bit OS for me?

  Does anyone have the link to the drivers for win Server 2008 r2 64-bit?
  Thank you very much!

  As much as I know Win server 2008 is not supported by Toshiba, so you will not be able to find the drivers for it. Toshiba offers support for OS preinstalled only and possibly an upgrade if your laptop model is supported for the new OS.
  Warranty has nothing to with Win server 2008 so I think that guys will not be helpful for you. What they can do is to check if the original recovery image can be installed or not. If this is not the case, there may be a hardware problem.

• Anyone know drivers installation for Satellite A660 - 11 M order

  Someone knows the drivers the order of installation for Satellite a660 - 11 m?

  I have some problem installing Win 7 pro (wlan don't work correctly,
  a few minutes after the start of the computer laptop, neoconservative to run CHKDSK on C: of freezing).

  Reading this forum seems to me that these are not new problems for users of Toshiba.

  Hello

  Where can I find t an installation order on the official website of Toshiba Satellite A660 but as written Akuma, Chipset utility must always be installed everything first and then other pilots.

  But the question is why you n t use Toshiba Recovery disk? It contains a ready to use of images (factory settings). Then you n t need to install additional drivers. ;)

• Satellite A300D-15B PSAKCE - cannot install the audio driver for Win XP 64 bit

  Hi all

  This is my first post here after hidden during the last week or so, my hope is that somewhere it helps and hope so!

  I have a wonderful Toshiba A300D-15B PSAKCE with RAM 4 GB/O, but I suffer from some problems RESEARCH Holy function cannot resolve. I use this laptop as a box of development for uni/work unfortunately...

  After a complete nightmare and Vista32, Vista64, I decided to go back to windows XP32, however this custom install, continues to claim a failure of a CRC file after (and Yes, that's with SATA in IDE mode and a disc of XPSP2)

  I decided that I really DON'T want to goback to Vista, so installed Windows XP64. Now the first installation is very easy, I have the basic configuration, the chipset, graphic, network, CPU, usb, fine... except basic... and that's where I lost most of my hair... SOUND!

  First try to install the results of the pilot of his failure, claiming the mmdriver.inf cannot be found or corrupted, obviously I checked, and yes there it is, downloaded pleasure the MMDRIVER. INF and placed it system32 and the installation always fails.

  I also tried a "manual installation", in .inf files... which includes pilots XP32/64 and Vista 32/64 bit drivers, still the same
  problem, the driver continues to not install. I am going bald. Exceptional drivers who moved there

  * - Audio device on High Audio Defninition Bus *.
  * - Mass Storage Controller *.
  * - Modem Device on High Audio Defninition Bus *.
  * - USB device *.

  If what follows is any help, (Sandra 2008)

  * - Disk controller *.
  (AMD (ATI) SB700 SATA Controller [IDE Mode])

  * - Disk controller *.
  (Toshiba SB700 IDE)

  * - Audio device *.
  (Toshiba IXP High Definition Audio Controller)

  * - Audio Codec *.
  (Conexant Systems 5051 hours)

  * - Audio device *.
  (AMD (ATI) [Radeon HD 3600 Series] RV635 Audio device

  Now, as I write this, I heard the rumor that the A305D uses the same
  audio/graphics drivers... Well well... off to try something I guess...

  If there is no help or ideas, I'd appreciate it.

  Hello

  The laptop seems to use the Conexant audio chip. So, you will need the right sound driver for Win XP 64 bit.
  Unfortunately, the European driver Toshiba page provides the drivers for Win XP but I don't know if the pilots would cover the OS 64 bit as well m.

  Anyway, what you need to know, is that you will need to first install the patches Ms.
  The fix KB835221 and KB888111MS must be installed before installing the audio driver.
  If you have tried to install the driver, then remove it from the Device Manager and update Windows XP first!

  AFAIK that SP3 already contains these patches then perhaps you should install SP3 first before starting with the installation of the audio driver.