c4599 lock

Similar Questions

• C4599 printer crashes

  I bought my printer C4599 from Best Buy, the end of October. It works fine on my wireless network, but after a day or so of non-use that it will lock upward and the only way I can get it unlocked is to unplug the power. Is it his problem as a software or a hardware problem? How can I solve this problem.

  The Hewlett-Packard Company released an updated firmware for the problem which occurs on the Photosmart series C4500 and Photosmart C4400 series. Updates are currently available for use on the Windows operating system.

  The following links can be used to find the software for the two affected products.

  Update critical to prevent and does not state for Photosmart series C4400

  Update critical to prevent and does not state for Photosmart series C4500

• C4599 fine facility - which goes away in a day or two!

  Hi all!  I just bought a C4599 (have been a passionate lover of HP printer for more than 10 years) and with enthusiasm the value it upward and I love it but I'm having a recurring problem which can force me to go back for another printer.  I contacted HP technical support by email and rec would be very sparse help, until then thought I would try here.  I * DID * search on the forum and found a problem similar to this one but it had not yet been resolved in a solution and it's a little different (he said his continuous printer to work properly, but only its scanner disappears - in my case the whole printer disappears).

  So here's the config:

  (1) C4599

  (2) portable Toshiba, the two Vista running (one is my wife, it is mine) - Although there are certainly differences between the two for personal use, I do all the updates/maintenance on them (and they are identical models) so, from the material point of view, they are identical and software point of view they are nearly identical (in regards to service packs, drivers, etc.)

  (1) type of computer (prior bench-tech, current software engineer retail) experienced enough - don't say not no way that I know all this!

  The initial installation and the results:

  (1) installed the printer via the USB port using my laptop worked great - printer configured to run wireless on my local network via DHCP

  (2) removed the USB cable and ran the new installer - this time change the setting using the printer now without thread - worked great!

  (3) Ran the software on my wife's cell phone, set up the printer without wire - worked great!

  (4) after that about a day, I noticed, when you try to print, the printer is no longer my choice of printer.  It simply isn't there.   The HP Digital Imaging Monitor also said that he is not here.

  (5) laptop my wife shows it is connected to the printer fine and prints successfully.

  (6) I notice that in the NETWORK Panel (on my laptop), the printer is still there - but restart my laptop has no effect.

  (7) I have reinstall the software on my end, the printer is located - works great!

  (8) problem is repeated several times on both of our phones over several days.  Whenever symptoms are almost exactly as described above.  Each one laptop can still use the printer while the other cannot (but don't read this to say never two laptop computers don't see the printer, they DO!  Once I have newly install the software on the laptop with, TWO laptops CAN THEN SEE the PRINTER - AND USE IT!  "But it's just a matter of time before it one of them 'loses' the printer... and sometimes both of them lose).

  (9) I then changed the printer a static IP address that I am sure no other devices on my network to fight for (it's outside of the DHCP pool and all the rest of my network is DHCP).  This has not solved the problem in a day or two, the printer has disappeared again.

  (10) I sent HP technical support and received a long document that describes how to open ports, to disable security settings, etc..  Even if it seems useful, it seems odd to me - I think that if I can see and use the printer (including scan) without any problem for a day or two then things like ports closed and too high security settings is not the problem - but what I know.

  (11) so I go to step 1 enamel, HP and step 2 so I am told:

  b. then perform the steps below to scan using the built-in Web server.

  1. open the Internet Explorer browser.
  2. Enter the IP address of the HP all-in-One server / print (recovered since the)
  Configuration page) in your browser.
  3. press ENTER.
  NOTE: Java must be installed on the computer. If you are using Windows XP,
  It may be necessary to obtain the latest version of Java.
  4. the Embedded Web Server is displayed.

  
  5. select scan, which displays the following options: Type of Image, Image
  Format, the size of the Document adjust settings accordingly.
  6. click on the scan button.

  (12) However, after doing all this and go to step 5, I see no. SCAN 'button' - in fact, nothing really "scan."  The web server page is very pretty and has areas for me to see the wireless configuration (and change) and do a few different things and the page looks complete - but no "scan" function cannot be found.  I know that the scanner is working normally, even though b/c I used it successfully several times.

  After you send the results to HP 3 days ago and received no response, I got to a point to give up - I'm far too busy to deal with a printer that needs to be reinstalled every day or two and nowdays return periods on most computer stuff is fifteen days while I'm about to consider fair return in a few days.  I hope you guys here can help me solve this problem!  (PLEASE)

  I know it's length was trying to provide as much information to information. that I could think of.  I appreciate all the comments that can lead to this problem being fixed.

  Thank you

  Bane

  Jim,

  Thought I'd post an update.  I went through the firewall document you provided, but it doesn't seem to help, not found any printer.  I reinstalled the software and that he was going to see if reinstalling AFTER opening of the firewall would make a difference, but the next morning the printer had disappeared and when I looked at the screen was black - the printer was locked up AGAIN (happened to me once some time last week).  I got fed up and said enough is enough and fired.  Due to my love along the HP printers and useful suggestions, I decided to go there and try another HP.  I even convinced myself to try another model wireless - but I decided to hedge my bets a bit and stepped into a whole new category: the OfficeJet (J6480).  The C4599 sought better but man, long-wise, the J6480 is * AWESOME *!

  I must say, install it was * PAINFUL *!  I started by uninstalling completely all the HP printer software of two laptops.  Then I installed the software, it finds the printer, everything was working fine until the installer had completely finished - then, suddenly got a message saying that the printer could not be found.  I have preview with this thing for about an hour without result (has moved to the AP, reinstalled the software, etc.).  Then I happened to put IP of the printer for static and in doing so found that installing the software was, who knows why, assigned an IP address to the printer that was far from what my DHCP is used!     Arrrgggh!  My DHCP is used from 192.168.1.200, and for some reason, the printer has been at an address in the 168.x.x.x range (I forgot what it was exactly).  After monkeying with the installation of the software for a while trying to figure out how to set a static IP address (which was the only way to do it on the C4599) I finally looked in the menu of the printer and find the option there.  Once I put the static IP address it I then reinstalled the HP software again and I walked the firewall document you provided and made sure everything was good there.  And then bada-bing, the printer is online and has worked beautifully - and, so far, it is still online!  (Keepin ' my fingers crossed)

  I'll give it a few days more and give you a last update if this thing is still online as long.

  ~ Brandon

• Reminders do not display or stick to the lock screen in iOS10

  IOS10 (10.0.1 and 10.0.2), on an iPhone (I use an iPhone 6), reminders are no longer reliable. I had several cases where the callback doesn't show even on the screen lock and many more times when the recall won't 'glue' to screen lock for more than a short period. Before iOS10, when you said to remind you at a certain time or place, the recall would display on the reliable lock screen until she has been marked as "completed".

  It is a major issue for people who depend on the application for the important tasks and calendar. There is a thread of any discussion on this point, for some reason, has been marked as "solved" even if a large number of people continues to post telling him that there is a problem for them too (as the thread located here). I wanted to start this new discussion which we hope will remain open until it is effectively resolved.

  Thank you!!! This is a HUGE problem!

  Since the update I had to reboot my phone EVERY day.

  Is the stick of reminders... or they do not. Lately they don't yet show upward. Then other things stick to the lock screen can't get rid of.

  Currently this feature on the phone is USELESS

• How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  Settings > Notifications > Messages > display on the lock screen

• What is the text on the lock below screen date, after upgrade to IOS 10?

  Hello

  I have iphone, and after I upgraded to IOS 10, from dated on the lock screen (muh.5 1438 AH).

  What is - this and how can I remove it?

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see

  Apple logo.

  It may take 30 seconds.

  See you soon

  Brian

• Chinese characters in the lock screen

  I recently updated to iOS 10 and shortly after started to see Chinese characters on my lock screen, under the date and time. I checked the language and region settings and see only English and selected Philippines which is correct. Don't know what that other settings I need to change? I also tried to change my lock screen and the same characters are still there.

  Thank you

  Marc

  Hello

  Bought second hand new iPhone?

  See you soon

  Brian

• my look of the IPad 2 is locked. I want to erase and reset

  my air pad 2 is locked, erased before using my itunes. i tunes won't recognize device not

  Follow these steps If iTunes recognizes not your iPad, iPhone or iPod - Apple Support

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I've tried everything

  Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I tried everything, every single idea. Without success! Any other idea?

  For example, you specify that the device does not display the lock screen, correct? Do you use Touch IDS? If so, try to put your finger on the device to see if it's what he wants.

  See you soon,.

  GB

• Photos in the camera roll on 'iPhone' cannot be imported because the iPhone is locked with a password or read

  6 + put iPhone updated to 10.0.0.2 and now get the error, the pictures on the Filmstrip on "iPhone" cannot be imported because the iPhone is locked with a password or read. You must enter your password on the iPhone to view and import them.

  Working solutions proposed so far. Guess I'll have to wait for the correction of a bug to Apple...

  iPhoto 11 (9.2.3); OS X 10.6.8

  On the alert to "trust this computer" on your iPhone, iPad or iPod touch - Apple Support

  LN

• IPhone locked

  HI, I have a question, I bought my new 6s of Iphone on the black market, but I can't open it, it says that I must write in icloud because it is locked before. I entered my address itunes but it doesn't work. I need help because I dreamed so that phone, and now I have it does not work. Thank you

  It's a brick. The phone is probably stolen. You met the locking of Activation. It is a mechanism of protection against theft. There is no way to get around.

  You have a fancy paper weight.

• installation of Sierra on MacBook - locked system & computer killed hard reboot

  MacBook locked during installation of Sierra. Pressed the power button to a hard reboot and now can not initialize get only a message stating your computer restarted because of a problem of waiting to continue to go, but it keeps looping to the same Message and keeps trying to restart.

  I put the installation disc in a attempted to hold the c key during the restart and the same thing happens

  The installation disk will not help on a Mac running macOS Sierra.

  Start your Mac while pressing the command + R keys.

  From there, you should be able to use the built in utility to check, repair and restore the OS X disc using OS X Recovery.

• How can I get rid of the words on my lock screen

  OK so I did the last update on my iPhone 5 and now, under the date on the lock screen, there are letters and words that are not really make sense. I guess that my child put them there. I looked through all the settings I can think but cannot find them to get rid of them. Does anyone else have this problem or

  I know how to fix it? Also, can I change the fact that I now have to hit my button twice to put in my code to access at home? It's rather annoying.

  I have

  Cut just the Hebrew calendar!

• My Macbook Pro won't let me put my password, after it has been locked in icloud

  Hello.

  I have a Macbook pro to the end of 2013. I locked using icloud with a four-digit code. I forgot the code and had several attempts trying to remember her and now I think I found it, but it won't let me put the code in another attempt. the message on the screen says 'wrong password. try again"but there is nowhere for me to try again. someone can help me. I tried to start upward into recovery mode, but she still needs the code for it, and when I get it it takes me to the screen locked again.

  Hello

  You will need to contact Apple to unlock your Mac: https://getsupport.apple.com/?caller=psp & PRKEYS = PL104

• Assistance required after you download Sierra - locked in a spiral of failure of the Installation

  Hello - I am a student of the University who made the mistake of thinking I had to upgrade my OS system after seeing some updates new flashy in the Sierra. Long story short, that my computer is locked into a cycle where I restarts and the installation process will begin installation but end abruptly and ask me to reboot again.

  I have exams and papers due and seriously want access to my data again. I don't have a back up of my files. As such, I am looking for a method that will allow me access to my files that I need to be able to read notes, print etc.

  Details: I have an old MBPro by the end of 2011. He was on as the primary OS x Lion. I had updated some time later. More recently, I got El Capitan and it worked very well. I downloaded Sierra in the background as I did work at home and after installing it, it asked me to reboot. This was the point that I was able to come back from. Reboot after installation scenario is as follows:

  -A progress bar comes up saying 34 minutes until completion

  -The progress bar goes to 33 minutes until completion

  -Beginning of fans of my computer acting upward and the bar stops and crashes of progression

  -The installation process says he doesn't have and asks me to restart my computer

  Specifically, I get the message 'Mac OS could not be installed on your computer. File system check or repair a failure. Quit the installer to restart your computer and try again. »

  When I quit the installer of the OS, I am taken to the startup disk option and asked to choose a system to reboot my computer with. I see 'Macintosh HD macOS 10.11.4' but when I click on it and try to restart I get the following error message, "you cannot change the disk on the disk selected. Startup disk could not gather enough information on the selected disk. »

  Things I've tried:

  Internet recovery mode: I went here to do a restore of the Mac OS x comes with my computer (Lion). This attempt fails and the computer tells me I can't downgrade because a more recent OSX is already on my computer...

  Recovery mode: I tried to come back just El Capitan from here. When I try to do the process will take literally one second before I get a notification saying: "an error occurred during the preparation of the installation. Try to rerun this application".

  Disk utility: I tried to do first aid and repair on this menu on the big disk image (since some of them pop up... I'm sure that the big one is my computer and the small setup of Sierra is?). I see that I 115Gigs franco 319Gigs departure. When I click on check and repair, the process takes some time and seems as he goes to halfway through before I get errors in the two. Repair error wonder backup my data.

  -some specific stuff; the journal for the repair of first aid says something like: the Macintosh HD volume could not be completely checked. File system check exit code is 8. Update support partition for the volume as required. File system check or repair a failure. Operation failed... »

  Safe mode: I can't start in safe mode. My computer will load the apple logo, progress on 3/4ths of the way start-up and then crash on its own and not restart.

  Things I have tried:

  Constituting a new boot USB of OS Sierra - I read that in so doing I can substitute the installation process that is going on right now on my computer and start a new... I hope one that works. I was not able to do this again, because I need someone to another macbook to make it and none of my friends won't let me touch their computers after the fiasco that happened on mine... Can I get some feedback on this?

  Backup: I don't have an external hard drive... I'm willing to buy one if necessary, but I don't know how to make a backup in a world where I don't have access to the major functional sections of my computer. Also, if my computer is * session here now, I'm worried that a backup will be essentially a * a backup... is this the work of the computer?

  Other thoughts:

  -my computer was working fine before I tried the upgrade... no complaints on my end, it was a real trooper

  -Maybe the download was corrupted?

  -I learned today that the operating system installation process requires internet connection - maybe that my internet connection is bad?

  -on that note, I want to say I tried a lot of different things. Been in different parts of the campus (different parts of my dorm building, IT support across campus, etc.). My University has also 3 options of WIFI, but each requires a separate verification process. Throughout this process, I have been connected to one of these methods. Switching may help? But, if I can't do the verification step (i.e. open a browser and type in the details of my student specific to actually use the web), I do not think that this will help you a lot. In addition, I am sure that I am already using one of the less frequently used options.

  I want to avoid a permanent possible deletion because there are important things on my computer.

  Any advice? Enjoy it!

  Same problem here on my Mac Mini end of 2012. I couldn't find any fix so far. The machine worked perfectly fine before with El Capitan and had about 50 GB of available disk space. I have use any version beta of Sierra, but officially released one that came yesterday. Really disappointing to see the new system operating software with fundamental questions and no good way to solve it.

  Any help really appreciated.