C4780 not within the reach of network wifi iMac airport w / Snow Leopard

Similar Questions

• How can I configure the order of networks wifi on my iPhone 6?

  I was browsing the Internet and looking for throughout my general settings but I'm not able to find a way to configure the order of networks wifi on my phone, as I can with my MacBook Air (via Network Preferences > advanced > tab Wi - fi). I had to do a reset to the factory on my router settings and now my iPhone automatically connects to another wifi network in the building which is distant; and, as a result, poor reception. He will also choose my device Chromecast before my own router, so I have to go and manually choose my router every time.

  Is my only option to "forget this network" for the device Chromecast and the other network wifi. Therefore, to move my router plus high in the list (and then add those two later, put further down in the hierarchy list), or y at - it a simple way to just change the order? Thanks for the help.

  Settings > Wi - Fi > select the network to which you want to connect, enter the password.

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!

• I am using the trial version of adobe photoshop. I want to buy it later not within the period of 4 months. So, how can I cancel my payment option

  I am using the trial version of adobe photoshop. I want to buy it later not within the period of 4 months. So, how can I cancel my payment option

  Hi mohammadr42362249,

  I see that there is no update on your account payment information.

  You can always contact our sales team customer care and make a purchase for the new http://www.adobe.com/products/request-consultation/marketing-cloud.html here

  https://helpx.Adobe.com/contact.html

  I hope this helps!

• "WARNING: Images not within the site"

  "WARNING: Images not within the site"

  (Dreamweaver 8 - Mac)

  I am trying to download my first site, but I get the warning above when I try.  My images ARE in the 'root' folder in a file named "images".  AND in my finder, they are all fine.  And when I load in a browser to test the site everything works fine.

  During my construction, I imported images in my site from another file outside my "root folder" and Dreamweaver automatically copied them more in my "pictures" folder in my "root folder".

  Because Dreamweaver copied the images automatically, I deleted the original with the image file.

  Can anyone offer an explanation and a solution?

  Check your site definition. You can set a folder of images by default wrong with an absolute path.

  Mylenium

• Need help: How do you download the free trial of Cs6 for a Mac Snow Leopard?

  How do you download the free trial of Cs6 for a Mac Snow Leopard?

  CS6 requires OS X 10.6.8.

  http://helpx.Adobe.com/x-productkb/policy-pricing/system-requirements-Photoshop.html#main _ Photoshop_CS6_system_requirements

  So be sure that you are on OS X 10.6.8.

  Download http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html CS6

• Pavillion 17334: hp pavillion could not find the second time warner wifi

  My wifi has two different connections. One is a 2.4 G and the other is a 5G. My HP Pavilion sees the 2.4 G, but not the 5G. How it connects to the 5G? I tried setting up manually, but it still does not work.

  Hello:

  Most likely, the (card) wireless network adapter is only a single card band (2.4 GHz) only.

  If you let me know which model of laptop wireless card is, I confirm my opinion on the matter.

  If you are unsure which model of your laptop wireless network card has, go to Device Manager, expand the category cards network and you will find the model number and name of the wireless network adapter.

  Or, you can confirm yourself... If the model suffix ends with b/g/n, the map only works on the 2.4 GHz band.

  Double band (2.4 GHz/5.0 GHz) Wireless-N cards have suffixes ending in a, b, g, d or a/g/n.

• RALink RT3290 does not "see" the 5 GHz networks (802.11n)

  I just bought a HP Pavilion 17 Notebook PC (number of product F9M00UAR #ABA) with victory 8.1 x 64 installed and the wireless card does not 'see' any 802.11n networks.  The driver installed is 5.0.37.0 with a date of 25/11/2013.

  I've seen problems with upgrades to 8.1 affecting the adapter, but nothing works not properly out of the box on a new machine from 8.1 to WIN.  Can anyone offer any suggestions on how to force it to see 802.11n?

  Thank you

  Mark

  Hello:

  The WLAN RT3290 card is only a single band (2.4 GHz).  He can not find the 5.0 GHz band.

  Whenever you see a suffix of bgn on a description of the wireless card, it means that it is a map only single band (2.4 GHz).

  Cards N whose suffixes ending with abgn or agn wireless dual band (2.4 GHz/5.0 GHz).

• Vista does not recognize the iphone bluetooth or wifi

  I have iphone 4S and unable to connect with the point by using wifi or bluetooth. Vista can't find the iphone as a device on network you connect to.

  Hello

  I suggest you to uninstall and reinstall the Bluetooth drivers. To do:

  (a) open Device Manager

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  (b) right click on the Bluetooth adapter.

  (c) select Uninstall

  (d) click Yes to remove.

  (e) restart the computer to reinstall the new Bluetooth drivers.

  Check if you are able to connect via Bluetooth.

  See also:

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

  iOS: troubleshooting connections and Wi - Fi networks

  http://support.Apple.com/kb/TS1398

• Install HP does not see the printer in network, Windows DOES. Help!

  Hello

  I am trying to add my HP Officejet k8600dn to Windows 7 (32 bit) so I can scan, but the HP Installer (add device) can not see the printer. The unit is set up by cable to a switch on my network via an ethernet cable. If I go into the menu "Add a printer" Windows, I can install the printer very well. But I have to be able to scan and I don't know what to do.

  Tips on getting functional analysis if the HP software is unable to see my printer? Subnet mask and gateway on the printer are the same for the computer and the printer. I typed the correct IP address in the "Add a device" menu of HP, but he sees not just it. ARRGG!

  Thanks for any help!

  Hello

  I think that there is some confusion because the Officejet k8600dn is only a printer, it is not a multifunction device and does not provide the capability of scanning.

  You can find the specifications below:

  http://support.HP.com/us-en/document/c01287217

  If you have any different model printer, please specify the exact model.

  Kind regards

  Shlomi

• computer does not list the available wireless networks

  My computer is used to list all available wireless networks I could choose, but now not a list of people or don't allow me to search for available networks. I'm in a place where I know there is a wireless network available, however, my computer will not display it or no matter what other networks unless I plug in an ethernet cable to my computer. Then, it connects, but still does not display the wireless options. Help, please!

  Looking for a switch on the case of the computer that turns on and off wireless networking.  Check the manual of the computer user to see if there is a combination of keys, such as Fn + F5, which turns on and off wireless networking. Boulder computer Maven
  Most Microsoft Valuable Professional

• Why each 'page info' is not within the parameters of plug-ins?

  When I check my plugins, add ons, updates, there is the option blocks right that define whether or not to 'Always enable' or 'always ask '. My question is:-for each page that opens, there is an "information page" option, we can check to see/check what is allowed or blocked under permissions... And * what permission settings "" ARE for this * page. Why EACH page does not display the settings of permissions that we already have on the screen * (?) plugins. EACH page must have the permissions again for EACH domain/server/site provider. Why * are not the settings on the screen of Plugins used * AS 'Default' for each page/site/domain, etc.. ? Note *-If I do not change permissions to "allow" for some plugins page won't work *.

   Also, the "Java Deployment Toolkit 7.0.450.18  10.45.2.18" still* shows as "Vulnerable" After* updating (verified update*). So I found the option to 'Disable' this particular plugin. Now it displays at the bottom of the Plugin page, greyed out.  However*... after updating to Java "SE7 U45" (..for 1 [One*] day ONLY, it showed as Up-to-Date, NOT vulnerable, on every 'page info' screen*) ... and Actually, it Still Does show as Up-To-Date after an Update check*..(??)... But on EVERY page info screen the "Java(TM) Platform SE7 U--Vulnerable Plugin!"  is displayed (?).  How can it be Up-To-Date and OK on the plugin check screen,  but show as a "Vulnerable Plugin" on EVERY 'Page Info' screen?
  

  Hello jhudson253, the parameter of plug-ins that you select in the addon Manager will be the default for all sites, unless you choose something else for a particular site. This could be useful in a situation where you usually want to retain a disabled plugin, but need to work on one site for example...

  regarding the java plugin, now firefox will consider each version of the plugin (current or not) as vulnerable by default: this step has been taken due to the recording of bad security of oracle in the past (seated on fixed vulnerabilities for months).

• Arrow key Navigation is not within the selection in the grid view

  Completely reproducible.

  Is this a normal behavior?

  Please watch the short video...

  http://cookbookplus.com/temp/AdobeLightroom4/LR4-bug-ArrowKeysGoOutsideSelectionInGridView LR4-Bug - ArrowKeysGoOutsideSelectionInGridView.html 41 seconds

  I thought [LR3} navigation remained in the selection for loop and the grid.

  But I could be wrong remember LR3?

  Thanks for all the inputs.

  He has always worked as you described.

  Navigation remains in the selection in Loupe and survey views, not in the grid.

  And it seems logical (at least to me).

• Text appears above the text area, not within the limits

  There is regularly a weird problem with text boxes in InDesign: some fonts seem to be too high in the text box, as if he had a vertical offset, like on the screenshot showing the police Gilgamesh. Anyone know how to fix this?

  Check on the Baseline Options tab in the text frame Options dialog box. Seems to me that if first base line can be set to fixed with a small minimum lag.

  And please do not change the title of the topic: it is very difficult to follow.

• Can't get the Time Capsule network to see Airport Extreme?

  I have a network set up through my Time Capsule and I want to express with my Airport Extreme, the problem is that I can't get the network to see Airport Extreme - or rather, we'll see, but when I try to connect to it, it starts to connect, and then I get an unexpected error. I tried to restore both their factory settings and did a restore forced several times to the Airport Extreme, but nothing helped. I made sure to affect my IPv6 link-local only, I've even re-created my network several times (always with the Capsule of time as the main base station, but nothing seems working.

  Any ideas would be very useful.

  The Airport Extreme and time Capsule have been purchased during the last month, and I'm under OS10.11.1

  First of all, try to update your software El Capitan to the current version of operation... 10.11.4... which was supposed to solve some of the bugs that cause the message "unexpected error".

  If still no help, try using an iPhone or an iPad for the configuration.  After the back if you don't know how to proceed.