Text appears above the text area, not within the limits

Similar Questions

• The present no embedded fonts in scanned documents containing plain text are not get converted fonts incorporated after OCR applied. But the texts are searchable. The text even unincorporated font that is formatted as text (not scanned) become stupid

  The present no embedded fonts in scanned documents containing plain text are not get converted fonts incorporated after OCR applied. But the texts are searchable. Even fonts not embedded text that is formatted as text (not digital) are themselves converted to fonts embedded by adobe distiller.

  Fix. Expected behavior.

  Output of the OCR is not incorporated. With Acrobat Pro, a preflight check is available to embed the fonts.

  On the use of Distiller - using a work option distill configured appropriately that the PDF created from the authoring application (FrameMaker, InDesign, MS Word, etc.) will have embedded fonts.

  Be well...

• How can I get the tabs group names appear above the tabs?

  At some point the names of all of my tab groups appeared above the tabs. In other words, there is a horizontal list of open tabs on each page. Above that there was a similar list of horizontal search all groups tabs. This horizontal list of tab groups is now missing.
  This has been useful to reorganize and re-classification of the tabs into different groups because I could see the entire page for any given tab and could move the tab to another tab group simply by clicking on the tab and dragging to any group in the section tab above the tabs section groups. It's usually easier than reorganization of the tabs on the tab page groups (accessed by clicking on "Your group tabs" icon top right of the screen).
  I don't know how this feature got there or why he went, but I liked it.
  How can I get that back?

  I agree. It is a very impressive device available through an add-on that is no longer supported. It would be really useful for me tab groups.

• Text that appears above the text box, not within the limits

  Hello world

  I'm having a problem with illustrator CS3. Whenever I create a text box, all what I type appears above him, rather than to her. I have the impression that it was caused by me accidentally changing a setting at some point, but I don't know what to do about it.

  If someone can advise? Screenshot is below. Thanks in advance!

  

  check the base line offset in the character palette

  or the definition of the Exhibitor in the menu of the palette (from the character palette)

• "Highlight" white lines appearing above the text and don't know why?

  Hello comrade InDesigners,.

  I am very confused! I have blocks of white highlight type appearing above my text and I can't understand why.

  I moved the text to the sidebar box and took a screengrab so you can see what Im doing refers to.

  I tried to create a new text box and apply style sheets to get and I get the same results. Any help on troubleshooting of that would be amazing.

  Thank you!

  -Kelly

  It seems you have nets of paragraph in your style sheets.

  Search for the rule above, and rule below.

• BlackBerry Smartphones sms texts are not 'threaded' more

  My text messages are not threaded more - every single incoming text appears even if it responds to a previous text.  I do not know exactly when this happened, but it's probably in the last week or so.  I have not installed any new apps and tried a hard reboot.  The only thing that I can remember recently is to remove my account gmail and adding a different Gmail (via BIS).

  I have not found any setting in my BB "BOLD" for this and I had no luck looking for an online solution.  Does anyone have any suggestions?

  Look at the Options > SMS text > number of previous items.

  What is your set number to? Set it to '7' and then observe what does what you want.

• Tecra M5-400 after uprade to Visa - icons, text are not correctly displayed

  Dear users,

  Just upgraded my Tecra M5-400 in Visa Ulimate. The problem now is that the icons, text, etc. are not displayed correctly (big, dull). Tried drivers from Toshiba, but none of them is specific for my model, and some of them do not install.

  Any ideas what I should do or what driver I need to download?
  Thank you!

  Hello

  Your device should have nVIDIA Quadro NVS 110 M graphics card. Google around and try to find the Vista driver for the graphics card.

• The images appear when printing that are not on the screen

  Sorry if this has already been covered - I can't find an answer with any of my research...

  I use Indesign CS3 in a Vista environment.

  I created a document in CS3 that contains images tiff, jpeg and pdf placed in it.

  Everything looks fine on the screen, but when I print a test in black and white on my HP laserjet pages contain an image where a 'ghost' of the image above it on the page is printed on it.

  "Ghost" images are always compensated by about 1/3 - 1 / 2 of the picture, they are printing on and disappear if I move the image of the 'ghost' comes off on the side.

  The "ghost" does not appear on pages where there is one picture above the other, does not seem to be limited to some combination of file types.

  It is not on the page outside a rectangle areas encompassing.

  I've tried mucking around with some print settings, but my knowledge is a bit limited in this area.

  This happens if I print all right out of InDesign or if I export the document as a pdf and print from that.

  I've never had this problem before using previous incarnations of this software and you want to go coloring print until I know if this might just be an artifact of the test B + W printing process, or if it's something else.

  Thanks for your help.

  Mingstru.

  First the good news. It's not your software, everything works fine.

  Now, the bad news; It's the printer... the easiest way to make sure is to print it on a different printer.  The fact that you barely notice it's probably because your pinter gets older, or need some replacement of consumables.

  As to how to solve this problem there are not that many, you can do it, you might try to print either way up, according to your location of the image, it would be not so sensitive.

• Words appear above the frame

  So I think there must be a glitch in my free trial because whenever I do a text box on the cursor starts in the top corner and then as soon as I type, the words appear about half an inch above the top line of the framework.  How can I fix it?

  Here are two things you might look for:

  (1) period of coverage:

  With the text selected, open the character Panel (window > Type & Tables > character). You have the vertical offset value by default. It would show as a value greater than 0. In the image below, it is set at 36 pt.

  

  (2) the first line of base:

  As part of the text itself, the text could be reassembled by the first base line option. Select the text block with the Selection (black arrow) tool. Choose object > text frame Options. Click the Options tab basis to look at the choice of the first base line. Try the different settings:

  

• Weird with the blue circle bar appeared above the tabs

  HI - last night, shortly after (not sure how long exactly) after installing Silverlight - direct on the preferred video amazon site, a strange white bar with a blue circle ringed appeared above my tabs in the browser. I do not think that it appeared directly after the installation of Silverlight, but some time later - during which I was on and off my computer - it 'appeared '...

  Here is a picture:
  http://imgur.com/WezuIoV

  And a mode of incognito, that shows something, but I do not know what...
  http://imgur.com/MlhJKbt

  I tried to disable the silverlight plug - nothing; I tried to play around with the Settings toolbar - nothing; then I restarted with modules disabled (in the Help menu) and it disappeared. But then when I restared in normal mode - it was always there... I need to reset (which probably do disappear, but I want to know what caused it)? Can I have some sort of bug? I'd be worried, virus (maybe it is excessive; I'm on a mac, but...)?

  Thanks for any help

  I fell on this particular issue so the other day. It turned out not to be any of my extensions the cause, but instead, it was a theme called "Default Mod" (which was updated to version 28 February 27). I've downgraded to version 27.1 and the blue circle went.

  EDIT: Looking at your screenshot, it seems that use you the default theme Mod as well, so it's most likely the problem.

• I downloaded the latest version. 14 may 2014 and have two lines repeating symbols appearing above the URL bar and the search. How can I fix it?

  When I fly over the symbols, I am invited to "subscribe to this Page...". "This appeared only after the update. The symbols are the same that appear to the right of the search bar and all the symbols that appear now in the service Menu to open.

  Looks like an incompatible extension.

  See this support article.
  
  https://support.Mozilla.org/en-us/KB/troubleshoot-extensions-themes-to-fix-problems

• How can I get all of the Office to appear above the task bar?

  HOW CAN I STOP ALL THE WAY DOWN MY OFFICE OR WHATEVER PROGRAM TO ADDRESS TO APPEAR BEHIND THE TASKBAR INSTEAD OF ENTIRELY OVER THE TASKBAR, SO THAT ALL PROGRAMS OR DESKTOP IS VISIBLE?

  On Saturday, August 14, 2010 18:36:51 + 0000, Ronnie Vernon [MVP] wrote:

  Ronnie, this isn't my experience. On all my Windows 7 computers, if
  you move a program window open to the taskbar and beyond, she too
  passes under the taskbar.

  Ken Blake

  Hi Ken

  It is also normal, as Nathan described. You can 'move' a window behind the taskbar.

  What I was describing is the default when you open a new window maximized. It should extend from the top of the screen to the top of the taskbar and not behind the taskbar.

  Thank you and sorry for misunderstanding you. Yes, I agree.

  If you have set on auto-hide the taskbar, this means a slightly larger magnified window, because it extends all the way to the bottom of the screen and if you appears the taskbar then it will cover the bottom of the open window.

  Kind regards

  Ronnie Vernon MVP

  --

  Ken Blake

• Head of the graphic to always appear above the graphs page?

  How can I keep the master page header to always appear above all the graphics on the linked pages?

  Select the item in the master page that you want to appear above any object on the linked pages, and move it to the first master plan through the context menu.

  Thank you

  Vinayak

• Items that appear above the other items when scrolling

  I recently started to relearn the Web site design, and a lot has changed since I designed my 1st couple of websites about 12 years ago.  The Web page I'm having a problem is

  http://www.ibewlu220.org/home.html

  I have a set menu at the top of the page bar.  When you scroll to the bottom of the page news carousel scrolls above the menu bar.  Twitter move scrolls under the menu bar is desired.  I'm not what prevents feeding carousel as element higher in the layout of news.

  Thank you.

  Your image carousel comes after your head in the HTML code, so it's rained high (close to the Viewer) on the stack of items on your page.

  It's an easy fix.

  You can set the z-index of your header div to something like 100 in the CSS and it should end by above (as long as the z-index is not set or assign a lower number for the carousel).

  Width: 100%;

  min-width: 769px;
  background-color: Blue;
  height: 120px;
  position: fixed;
  top: 0;
  Left: 0;

  z-index: 100;

• White blocks appear above the text. Export in the same way.

  Hi all!

  I am under Photoshop 2015.5 and CR 9.6.1
  I have created a flyer and I keep running into this strange issue.

  If I click in a text layer to change the text, this appears perfectly.
  But when I click on get out a white block will appear on a part of the text.
  The block moves at random as well.

  I had the problem of white and black last year block, and blocks never exported.
  They do so.  They export in ' Save as ' and 'save for Web '.

  
  Here is deselected

  

  And now selected

  

  It makes me crazy billy because I can't even export these to my client.
  Here, it is exported.  It copy and stick as well. You can see them randomly everywhere.
  

  And here's what I'm running if it's important.

  

  
  Thank you very much for your help!

  AHA! , the Point, I just

  in the options bar for, Select the text layer and set of anti-aliasing to "strong."