C4795 using Mac 10, 8 - no driver

Similar Questions

• Cable or other to connect my Mac Pro SSD 256 Gb and use it as an external drive

  I replaced the original 256 GB of my Mac Pro 6.1 (end of 2013), but now I'm looking for a cable that allows me to use it as an external drive.

  Is there anyone who knows how?

  Where I can buy it?

  How much does it cost?

  Thank you very much.

  This article to OWC/macsales discusses adding their line will have the replacement SSD modules to your Mac Pro end 2013. Course to the bottom of the page, under the title "Take factory SSD with you", they show their sent Pro USB-3 SSD enclosure:

  http://eShop.MacSales.com/shop/SSD/OWC/aura-for-Mac-Pro/

  available separately for US$ 129 rates with up to 500 GB of transfer here:

  http://eShop.MacSales.com/item/OWC/MAU3ENPRPCI/

  .

• I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  External DVD USB drives are cheap. Usually $20 for a good quality player. Just buy one of these at Best Buy or another store and use it to install Snow Leopard. Then you also have a drive for something else that you have on the disk.

• Should what format I use for my external hard drive?

  I have an external drive that I wish I could use (writing) from my Mac and my PC, but without the limitations of + 4 GB files.

  Is this possible or am I pasted with limiting the size? If so should what format I use on my external hard drive? and it has all the other notes aside I should know?

  Thank you!

  Hi Filabaca:

  If you want to use a hard drive external Mac and PC options are:

  1. format the drive in Mac as exFat

  2. format the drive to NTFS on a Windows PC and use a program like Paragon NTFS for Mac. https://www.Paragon-Software.com/home/NTFS-Mac/

  Paragon NTFS for Mac allows you to use a disc formatted in NTFS by a Windows PC.

  Here is an article showing the difference between FAT32, exFAT and NTFS. http://www.howtogeek.com/235596/whats-the-difference-between-fat32-exfat-and-ntf s /

  Kim

• Want to use ReadyNAS as a shared drive for all computers on the network, how do I do this?

  Nevermind - figured it out

  Hi Axulus,

  Welcome to the community!

  You can also consult these articles for reference.

  How to map a network drive (Windows XP, Vista, 7, 8, 10, Mac OS X)

  ReadyNAS with access using Windows Explorer

  To access the ReadyNAS using MAC OS X

  Kind regards

  BrianL
  NETGEAR community team

• Hello. I use mac to make presentations keynote and photographs of edition. I am currently using Macbook air 128 GB and 4 GB of RAM.  But I find a little slow now. Planing to buy a new. Which one should I buy for my needs?

  Hello. I use mac to make presentations keynote and photographs of edition. I am currently using 11 "Macbook air 128 GB and 4 GB of RAM running on the latest ios.  But I find it very slow now, especially my keynotes. Planing to buy a new. Which one should I buy for my needs?

  Before you buy a new Mac, as a test, save your user files, erase the hard drive, install Mac OS X and then install only your most used applications. It should work like new.

  Any model of Mac bought today, will run Keynote, and Photo editing with ease.

• Which icon use to open a flash drive using my iMac

  Should which icon I use to open a flash drive.

  Double-click the icon of the drive itself.

• I use mac pro 4.1... RAM DD3 2009 Annual bus 1066.Toi want to upgrade RAM ram... I can't... bus in 1333 was dominated by toi.cam thank you to all

  I use mac pro 4.1... RAM DD3 2009 Annual bus 1066.Toi want to upgrade RAM ram... I can't... bus in 1333 was dominated by toi.cam thank you to all.

  I don't understand what you mean by "I can't... bus in 1333 was dominated by the toi.cam.

• Orb iTunes turns when you try to sort Apps on Iphone s 6 using Mac or PC. How can I solve this problem?

  Orb iTunes turns when you try to sort Apps on Iphone s 6 using Mac and PC at different times. Applications do not appear to the right of the applications that are registered in the ITunes applications library. How can I solve this problem?

  Hi leon4444,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are having these problems with your iPhone. I'm kinda not clear on the exact nature and scope of the issue you describe, but if you are having problems sorting or organize your apps using iTunes, you can verify that you follow the procedure described in the following article:

  12 iTunes for Windows: Sync and organize iOS apps

  Concerning

• Can I use more than one flash drive to ready boost on Satellite L650/0ed

  Hello

  I have a toshiba Satellite L650/0ed, it's good if I use more than one drive 8 GB flash for "ready boost" - what is the maximum number of using flash-drives can devote to the "ready-boost.

  In addition, if I use a 16 gb flash drive, will this affect more memory "ready boost".

  Why the 3.5 drive seagate expansion 1 TB is not compatible for ready-boost.

  Thank you
  -Brent907

  Hi mate

  Please check this Microsoft page that describes the ReadyBosst
  http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

  There, you can find this statement:
  + ReadyBoost works with storage devices more flash. In Windows 7, it can handle more memory and even multiple devices * eight *, for a maximum of 256 GB of additional memory. +

  I hope this can be useful!

• HO OfficeJet Pro 8600: how to remove a static ip address on my HP 8600, using mac 10.7.5 work with wifi

  I have trouble printing through my wifi network. How to remove a static ip address on my HP 8600, using mac 10.7.5 to work with wifi?

  With the help of my NetGear N900 / CG4500BD modem/router with DHCP, there are different IP addresses of the printer, if the printer is connected is 192.168.0.13, when the printer use wifi IP is 192.168.0.20, and on the printer, it shows 192.168.1.142 I think is a static IP address, because it can cause the confussion.

  I appreciate your help, thank you, the Job Dr.

  Hello

  Please go to system-> Network Preferences. Select the airport on the left, and then click Advanced in the bottom right. Switch to TCP/IP and select "using dhcp". Click ok, and then click on apply. After a few seconds, you should get an IP address from the router.

• Setting up Deskjet 6988 for wireless printing after a reset to the factory settings, using Mac OS 10.8

  Hi - How re - connect to my printer wirelessly after a reset to the factory settings? I use Mac OS 10.8. The network on the printer flashes, and on the Mac, it is listed as "not connected". And the page of report confirms that he has lost all of its data.

  Fortunately, I made a report page before resetting, so I think that I know all of the critical information, I need to come back here, but I can't figure out how to do this.

  I read the installation guide, who said to use an ethernet cable and the CD of HP, but I don't have the CD anymore.

  I tried an ethernet cable and entering the IP address of the printer, but which did not, perhaps because it has more this IP address.

  I tried the steps hereand downloaded the latest version of the HP update software software, but I don't see my printer. I went from my wifi to hpsetup network and then I could see and add a second new instance of my printer, but it did not help, because this second instance of the printer is not connected or the other.

  Interestingly, when I am connected to hpsetup, I can print.

  Can someone help me to re - connect this printer? I'll save the reason for reset for another post!

  Thank you very much!

  FIXED! Sunshyne2005, thanks a lot to direct me to the solution!

  Here's what worked:

  1. Connect to hdsetup
  2. Press the report Page button on the printer (the one with the box)
  3. Continue with step 3 of the Sunshyne2005: open a browser and enter the IP address of hdsetup.
  4. Look around for the wireless configuration wizard (sorry, I can't access is no longer hdsetup, and I just don't remember where it is)
  5. Enter the SSID (name) of the wireless network and the password
  6. Note: You will see a button to finish, but it has no effect. At this point, the printer is successfully added to the wireless network and access the hdsetup disappears. Therefore, the wizard will no longer work, but the important thing is that the printer is connected. : )

  Thanks again, Sunshyne2005!

• 8500 A910g: double sided printing no longer works on 8500 A910g printer using Mac

  Can someone help - double-sided printing stopped working on 8500 A910g printer using Mac?  I used to be able to toggle the menu layout on the printer, but now it is gray out and one side only the default

  Thank you, Rob

  Hi @robgit,

  Please check back with the results of your efforts.

  You may need to configure the automatic duplexer in the HP printing software.

  Discover sone of the procedure described in this document - printing on both sides of the paper (duplex) (OS X). Note: This model of printer supports automatic duplex printing. Scroll down to "How do I duplex automatic if my printer takes in charge?" in the FAQ section.

  Please let me know if it helps.

  Thank you!

• Are there disadvantages to the use of the generic video driver?

  I have a nVidia GeForce FX 5200 graphics card on my Dell Dimension 8300 Win XP home sp3. Last week my computer could not start gives me a blue screen saying problem with NV4_disp device driver got stuck in an infinite loop. Problem with the device or the driver. Check the update of the driver of the seller.
  (1) I changed monitors - same problem
  (2) I downloaded and installed the latest version of the Dell driver dated 2004 - same problem
  (3) I went to the Nvidia site and downloaded and installed the latest version of the driver dated 2008 - same problem
  (4) I disabled the graphics card in the Device Manager and ran dxdiag, who said that I use the video driver generic vga.dll

  Here's my question. I'm not a gamer, and on my screen (1024 x 768) screen looks identical to what I'm used. Are there disadvantages to the use of the generic video driver? Are there missing capacities that I can run in navigation, reading electronic mail or watching videos on Hulu? I noticed that on the generic refresh rate is up to 60 hertz instead of 75 hertz.

  Hello

  RUN sfc/scannow, and then chkdsk /f /r to ensure corruption is not a
  the part in question.

  If this fits your needs and then use the default driver, because he will not harm the entire system
  way.

  Would be a good idea to check their books online with the support of Nvidia, and
  drivers (manually check) and ask in their forums for known problems.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  ===================================================================

  Also check with Dell Support and ask in their forums known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  Hope these helps.

• Z800 - Incorrect used the disk in the drive of Windows 7 boot

  Hello

  I have a very strange situation with my two Z800. I bought used them "out of contract".

  Among the motherboards was defective (one of the memory locations that it would generate an error

  probably a cpu twisted PIN?) and the other had this error I describe below. So I decided to

  two new motherboards think that two of them had problems buying... However, I am still

  the error that I describe below.

  Any help would be LARGELY APPRECIATED!

  Now, I'm only using two new motherboards.
  Z800 #1 config: two L5639, 96 GB of RAM (6 x 16 GB) BIOS v3.57 (I upgraded from 1.18)
  Z800 #1 config: 5520 x, 24 GB of RAM (3 x 8 GB) BIOS V1.18 (it came with the jury)

  When I install Windows 7 64 bit ultimate (two different MSDN Downloads) on hard _any_

  by car (I have tried many, partial list is below) connected to the SATA _any_ port (LSI or)

  Intel) (I tried all the different combinations of disks) on one of the

  systems, I get the same error. After the installation is complete and I check the disc

  disk space is _always_ fallacious.

  For example:

  Hitachi 700 GB HDD SATA2.  No other software other than Win7 install (about 11 GB

  files). When Windows starts the installation he sees a 698 GB drive, which is fine.

  Once installation is complete if I look at the drive C: he said 607 GB is available, up to 13%

  is used or about 90 GB... I right click all files on the C: drive however but

  they represent only 11 GB. What happened to the 78 GB of missing space?

  Similar, but more bad results with a processor Intel 320 160 GB SSD. Same scenario. However this time

  Windows believes that the player has 149 GB of free space (which is fine) but after the

  Install reports only 1.4 GB is available after the installation of windows. With only 11 GB of

  files in fact too much space. What happened to 138GB missing?

  What is really strange, it's that if I started 700 GB Hitachi drive and I have the Intel format

  the 320 series 160GB as a secondary Windows data drive, all space is

  available. I can copy files and the space used is correct... The same exact when results

  Am I on the Intel than BONE and Hitachi drive as data drive. The reader of the BONE

  bad shows used space and Hitachi is fine.

  The exact same results occur on the #1 and #2 of Z800 Z800.

  I tried the following SSDS: two 320series Intel 160 GB, 240 GB ADATA, Intel

  840 series 250GB, Kingston 300 160 GB and several older Rotary readers of

  Hitachi, WD and others with all kinds of different abilities and most of the spinning

  SATA2 and SATA3 a discs. the results are always the same. The Win7

  installation led still misreports the space used, but the data disk (any who

  reader that I use) always correctly reports the space used.

  I'm sure that I tried to use all of the ports on the controller Intel and LSI

  controller and I still get the same results. I've set up the SATA controller in

  IDE mode with the same results. I've set up the SATA controller in RAID mode with the same

  results.

  I flashed the drive Intel 320 with SSD utility HP, same results.

  I tried to load the drivers Intel and LSI as part of installing Windows

  procedure, but the Dungeon to get the same results.

  I tried sitting on a Chair and standing on one leg, but the results are always the

  even. I tried during the day and in the evening and even late at night, even

  results...

  I went to it last month. I contacted HP support, but they claim it hurts

  motherboards. I understand the issue with the twisted up like a bad mother but 3 pin

  all other similar problems?

  I configure something in the BIOS? or y at - it a setting that I'm not aware?

  Any suggestions would be greatly appreciated.

  Thank you!

  I finally solved the problem.

  The problem, it turns out, was related to the configuration of large capacity (GB 48 and 96 GB) memory. While I built servers with this amount of memory, and even more, I never built like that, desktop computers. Turn, the impact of this on the Windows desktop operating system memory size is dramatic at this scale. Server OSs are different and so the impact is not the same.

  Combine hard drives relatively 'small' (160 GB, 200 GB) in proportion to the size of the memory and this is where the problems occur. In a more typical 4 GB or 8 GB or RAM Office combined with a 1 TB drive, you won't even notice the effect.

  Question #1: The Windows 7 pagefile (pagefile.sys) aka virtual memory. It turns out that, by default, Windows creates a page file that is equal to the amount of physical RAM + 300 MB if 1 GB or more of RAM is installed:

  http://TechNet.Microsoft.com/en-us/magazine/ff382717.aspx

  So now the largest system (96GB RAM) with the 160 GB drive (which Windows was seen as 149GB), 11 GB has been used in the Windows OS itself, then 96GB has been used by Pagefile.sys leaving 42 GB of available disk space.

  Question #2: Windows 7 hibernation file. By default, Windows creates a hibernation file which is 75% of the size of the memory. Why not 100%? because it compresses data before shutting down:

  http://download.Microsoft.com/downlo...footprint.docx

  So now the largest system (96 GB RAM) with the 160 GB drive (which Windows was seen as 149GB), 11 GB has been used in the Windows OS itself, then 96GB used hiberfil.sys PageFile.sys and (75% 96 GB = 72 GB) for a total of 179 GB. This means that the disc was actually larger. Even the biggest startup drives 500 GB, 750Go you always notice 179GB missing.

  Planned around work.

  The question of the hibernation: hibernation is only useful if you plan to put the system into hibernation - good for computers laptops, but not usually necessary in the workstations. . These systems will be used in audio and video production environments to the each with a dedicated inverter, so it does not intend to put them always in hibernation. Hibernation can safely be disabled in this case.

  http://helpdeskgeek.com/Windows-7/Windows-7-delete-hibernation-file-Hiberfil-sys/

  On the question of Pagefile.sys, we look at a few scenarios.

  Option 1 - use a larger SSD and therefore the size of the pagefile.sys is not a problem. In this case a 300 GB or better yet a 600 GB SSD would be very appropriate

  Option 2: Windows is capable of using a separate drive for this function, if the OS is on a disk and the pagefile.sys on another. What is important is that the drive used for pagefile.sys must have the same performance or be faster than the reader of the OS. So if an SSD is used on the main OS drive, do not use a drive 5400 RPM because problems occur... this reversing technically would work: 5400 RPM drive for OS and an SSD for better pagefile.sys, use two matched SSDs.

  We are fortunate to have a corresponding spare SSD, so we'll probably use it for this purpose.

  Option 3 - we had planned to use a VIRTUAL disk on the system of 96 GB. This means that we had to book 32 GB of RAM to the real system and then assign the other 64 GB of RAM like disc data in memory when working on projects. Load us the data to the VIRTUAL disk and copy to the storage drive when you are finished. Partially risky if there is a power outage because we can lose the files, but with a UPS the risk of crashes. We also have plans of relying on tools to sync files to save the RAMDISK in session. In this scenario, you can actually reduce the size of pagefile.sys since we would never use more than 32 GB of RAM. It is also prudent to reduce if keep you track of the size of the file over time and you have a good idea of the amount of memory you use. So if we ever go beyond 12 GB of usage, then we will reduce the size of the pagefile.sys properly.

  So that's it. It has been a long road to get to this point. Now, we can finally start using the system as planned.

  I'm surprised HP technical support was not aware of these effects. Well.

  Hope this is helpful to someone else out there.

  Eric