C50-A0G1 - drive satellite optics unpacking - preparation for use

Similar Questions

• Toshiba satellite click not available for use 10 2 battery

  Hello, I have a problem with the second Says Toshiba satellite battery battery click 10 - ch. 2: it is not available for use. I did the bios 1.7 update. I have 1 fully charged battery for 10 hours.
  Does anyone have a solution?

  See another thread on the subject

• Driver Satellite P10 504 WXP for video, modem, and SM bus controller

  I just had to replace the hard drive in my P10 504 and I now have a lot of problems!

  1. I used the restore disks and XP Home Edition is installed, BUT the video, modem, and SM all spotted in Control Panel and do not installed the drivers from bus controller! The modem, I can live without, but I would like that the video works properly and the SM bus controller is also pretty essential. Guess what, I can't
  (a) find my model listed on the Toshiba site and
  (b) I can't find the drivers for the video or the SM bus controller.

  I downloaded the 'universal' Nvidia driver, but it does not work! Regarding the SM bus controller, I have no idea where to look!
  Any ideas please?

  Thank you
  Tim

  Hello

  Your ad is a little surprise for all the XP drivers for your laptop must be available on the Toshiba driver page.
  Have you chosen the right notebook series and you download and install all the necessary drivers?

  First it of important to install the chipset and graphics card installed function utility
  You have to choose and install the right display driver!

  Once again! The drivers are on the page!
  http://EU.computers.Toshiba-Europe.com-> support downloads & -> Support page-> download driver

• C50-A-1JU satellite - cannot download drivers for Win7

  Hello, I upgraded the operating system to Windows 7
  I couldn't find the proper drivers
  Drivers on your site broken a download link
  Impossible to download drivers
  http://www.Toshiba.co.il/innovation/download_drivers_bios.jsp?LNG=29&service=IL

  To download drivers, I use http://www.toshiba.eu/innovation/download_drivers_bios.jsp link, but I also checked your link and result is the same.

  Clicking several to download drivers (chipset, screen, sound, LAN) download works correctly.

  You can post here a link that does not work for you?

• Need driver Win XP ATI 2400 for 210 - 1See Satellite chart

  Hello

  where can I find an effective driver for the illustration of Satellite A210-1See for WIN XP
  Also I need a XP for Bus SM driver?

  Someone an idea...?
  Thank you

  null

  Hi mate

  I had the same problem in the past have installed XP on my machine and was in need of a GPU driver.

  I ve checked the entire page of the Toshiba driver and it seems that there are different series that were equipped with the same GPU chip.

  You can use the XP ATI driver that has been published for the following series:

  PSAENE satellite A210
  Equium P200 PSPB8E
  Equium A200 PSAE8E
  Satellite A200 PSAE6E
  Satellite P200 PSPB6E

  I'm not quite sure that this device is SM m s BUS maybe it's your card reader. Then you can try to install the card reader driver out for another series of A210.

  Good bye

• PE1950 R3 PERC6 / i - Drive replaced and returned at nine but still flashing the model "identify/preparation for withdrawal?

  Hello

  First post - forgive me.

  I have a Dell PowerEdge 1950 of R3 with basket 4 x 2.5 "SAS/SATA connected to a PERC 6/i. 4 x 1 TB SATA WD red disks are mounted configured in a RAID10, and all worked happily for 6 months. A drive has failed, so we jumped out and jumped into a new. Rebuild starts automatically and completed in 208 minutes.

  Now all is well again, unless the reader identify / preparation for the distribution of light removal still flashes on the replaced disk. Table health is reported as optimal, all the disks are online, and there is nothing wrong in newspapers PERC.

  Is it just a firmware error which may disappear during the next reboot? (We cannot restart this machine right now... don't ask!) but it makes me nervous even if everything works well and the newspapers to report a successful reconstruction and optimal condition.

  Thanks for the ideas, you may be able to give!

  Lee

  Product name: PERC 6 / i integrated

  Serial number: 1122334455667788

  FW Package Build: 6.3.1 - 0003

  Data from MFG.

  ================

  MFG Date: 24/06/08

  Transfer date: 24/06/08

  Revision number:

  Battery FRU: n/a

  Version of the image in Flash:

  ================

  FW version: 1.22.32 - 1371

  BIOS version: 2.04.00

  WebBIOS Version: 1.1 - 46-e_15-Rel

  CTRL-R Version: 1.02 - 015 B

  Pre-launch CLI version: 01.00 - 022: #% 00005

  Boot block version: 1.00.00.01 - 0011

  Images pending in Flash

  ================

  None

  Our only other option would be to use OpenManage for send omconfig commands. If your version of Linux is capable of running OMSA then you can install it and then run the command:

  https://Linux.Dell.com/repo/hardware/

  If you can not install OMSA, then you can start on a live CD/DVD of the OMSA:

  http://Linux.Dell.com/files/OpenManage-contributions/

  Direct OMSA is a CentOS distribution that has OMSA and several other utilities built. It is installable, but you do not want to install it on your current OS so be sure to select the live Webcam or load the option memory at boot.

  Once inside of the OMSA live or after installing OMSA in your current operating system, you should be able to run this command to unblink drive:

  omconfig action of pdisk storage = unblink controller = pdisk 0 = 0:1:2

  You may need to use omreport about what are your ID controller and pdisk. on the pdisk is controller: channel: IDLecteur

  Thank you

• Need to Conexant Audio Driver Windows XP 64-bit for satellite P300 (PSPCCE)

  Need Driver Audio Windows XP 64 for 1 year Satelite P300 (PSPCCE).

  If any body can help please!

  I instaled Windows XP Proffesional 64 bit, Service Pack 2.

  The Milkeficent provided by Toshiba (Conexant Windows XP 3.47.1.50 is not 64-bit driver!
  ) fails because it can't find the (mmdriver.inf) file in the system32 folder.

  The file exists and is not crrupted or damaged. WHY he falls down?

  I'm not sure but looks like these sound card drivers for a 64 bit of Vista and not XP 64 bit OS OS
  You have to search on external Web pages to a 64-bit XP Conexant audio driver!

• C50-A628 slow satellite operation

  Good day everyone.

  Sorry if this post is in the wrong section, but, please help.
  I know that perhaps some people might think this as a waste of time, or just something you could find in google, but for all * 7 months *, I tried to understand why my new laptop is slow.

  Because this laptop comes without a pre-installed operating system, there is no restore disk or disk factory reset. For the first months of the use of my laptop, it was running windows 8.1 + pro +.

  Whenever I use it, it opens everything good, except when my browser is open. everything becomes unstable and unresponsive. After a few seconds not responding, I can use it again as long as I have no multitasking. I installed the latest graphics drivers and a few apps, but that's all. I thought it was a problem with windows 8 on 5 days, so I went down to + windows 7 ultimate 64 bit +.

  Now I'm starting to think that maybe the problem is the drivers since I did not install the required drivers for the laptop, because it did not come with reset disk and drivers.

  So now, I would like to ask for help on this issue. Please present the installation of windows 7 and all the required drivers for my laptop which is the * TOSHIBA SATELLITE C50 - A628 RUNNING WINDOWS 7 ULTIMATE 64-bit *. (Or any idea on why this problem occurs)

  Thank you and have a nice day.

  -George B.

  A note: the performance of the system, in particular issues of internet browser has NOTHING to do with drivers preinstalled on your laptop. For most drivers are not the reason why the laptop is running slowly (software slowly, etc.)

  Is that your C50-A628 Satellite was equipped with 2 GB of RAM.
  But also a part of this 2 GB of RAM is shared with GPU: Intel HD Graphics
  So less than 2 GB for the system and applications used.
  To be honest; It is not sufficient to operate the system smoothly!

  I recommend you to upgrade at least to 4/6 GB or more RAM 8 GB of RAM for best performance.

  Regadign download the drivers:
  The Win 7 driver can be downloaded here:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU
  Choose: C50 - A PSCJGF Satellite

• C50-B-140 satellite - touchpad is almost unusable

  We got a c50-b-140 satellite, and the touchpad is almost unusable.

  It keeps freezing sporadically. and is very frustrating to use.
  machine to win 8.

  Someone can advise if this is a known issue, or is there a solution for this?

  Hello

  I m not very well what kind of touchpad of your laptop supports because there are two modules different touchpad: Synaptics and MOMENTUM.

  However, you can check this detail in the Panel? mouse? last tab (button settings)

  If you would like to know what your laptop touchpad supports, visit the page of the Toshiba UE driver download a driver from the touchpad to the touchpad module.

  New pilots Synaptics and MOMENTUM were released a few weeks ago, so its advisable to check the new version of the driver.

• Time Machine is constantly preparing for backup.

  I use my iOmega external hard drive to back up my Mac Pro for the past 5 years.  Now, all of a sudden, he is constantly preparing for backup.  Any suggestion of back me to normal will be appreciated.

  Try:

  http://pondini.org/TM/D1.html

  Stuck in the "Preparation" or "calculating the change."

• Upgrade the hard drive Satellite 2410 404

  Hello

  I want to improve my toshiba Satellite 2410 404 with a hard drive again. For now I have just 30 GB drive and is not enough for me.

  I checked three products to a new Toshiba hard drive.

  MK-8032GAX
  MK-1032GAX
  MK-1233GAX

  The model MK-1032GAX 100 GB is my favorite and now my question is, if this drive work with my laptop (im going to install the drive in a toshiba technical station, don't do myself.) or if I have to change something with my mobile phone, update the bios or something.

  Just tell me what I should do to work with this drive or if my laptop is not ready for it because it is nearly three years.

  Thank you very much.

  Hello

  As far as I know this laptop supports only 20 GB; 30 GB; 40 GB and 60 GB hard drives
  I guess that a 100 GB HARD drive will not be recognized by the BIOS.

  60 GB MK6021GAS HDD
  MP40KF 40 GB HARD DRIVE
  MK30kef 30 GB HARD drive
  MQ20ksf 20 GB HARD disk

  Hope this info will help you

• Satellite L670-1KZ - problem for a disc of 3 TB external HARD

  I use 3 TB drive Seagate and WD on my Antec external box or grid of storeva very often to back up my data.

  The problem is it randomely, I can't disconnect my external hard drive.

  Sometimes, it works using HotSwap when connected with e-sata cable, sometimes it is said that my external HDD is still in use and request a reboot, but more dangerous, like today, nothing happens when you use this time this cursed F * tool windows 7 64-bit: "eject the disc safely" through the green icon.

  I see my drive external HARD on windows Explorer, but it is completely locked and blocked, frozen. I can wait an hour, nothing changes. The problem is that when I try to reboot my laptop, it crash and I have to manually shut down.

  And it's very bad, because after that, when I reconnect my external SD, I still have the same problem, the data have disappeared or are inaccessible.
  If I perform a scandisk to repair the damaged cluster supposed-to-be, it hangs at X %, then, I'll have to kill the process, restart, plug the external SD. And then, no error message more, not corrupted data etc etc...
  The result is sometimes, no damage, sometimes I have the bad surprise with damaged files, it's Russian roulette!

  I never know if my data on my hard drive has been corrupted or not until I test, how for example an original bluray movie that will not play propely because a single m2ts file is dead.

  I'm tired of living with fear or crashing 3 TB of data at any time, the 2 TB SD never never will ever face this problem.

  * Question: * is at - it solution secure to avoid this problem of ejection of the external 3 to DD permanently or do I have to change my cell phone? I don't have a PC, just my satellite.

  With my thanks for your help, I'm desperate.
  Guillaume

  > Sometimes it works using HotSwap when connected with e-sata cable, sometimes it is said that my external HDD is still in use and request a reboot, but more dangerous, like today, nothing happens when you use this time this cursed F * tool windows 7 64-bit: "eject the disc safely" through the green icon.

  Generally, you will not be able to eject safely the external HARD disk, if an application still accesses the HARD drive. This can be a process that runs in the background.
  In this case you must close this process in order to eject the HARD disk.
  In my case, I couldn't eject the HARD drive because I've downloaded some files from the external HARD drive to my cloud. I had to close all my browser windows just to eject the HARD disk.

  But this does not mean that this could be the case even for your question, it may be any process that you know

• Re: Satellite L300-1DN - how to use recognition of face for login

  Hello

  I recently bought a new Toshiba Satellite L300-1DN and I want to use face recognition to connect.
  I registered my face with the usual set up, until the movement of the head and side by side in a fixed sofa downstaires.
  Now here or in any position other than this couch I can't connect without a fault which is very annoying!

  Because I thought that I would probably be more connect from my office in any case, I have re-made the installer, which worked.
  Over and over in the exact position even newspaper failure!

  Now, whenever I try to re setup my face etc, I am going through the whole process and it fails.
  I've done about 5 times now and make me very frustrated!

  I just want to know if theres any way to connect with different places and run the perfect set up?

  Thank you, Joe

  Hello

  Maybe I can help my friend.
  I searched here in the forum for useful discussions and forum it here:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=147434

  The user shaaaaan has reported this statement:
  To use smart Toshiba face recognition software:

  First of all,

  step 1. Although it cannot be configured or whatever it is, check the weather its already installed in your system, to do,

  1.a. open 'computer' from the 'Start' button
  1.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
  1.c. double-click "Program Files."
  1.d. double-click "TOSHIBA."
  1.e. weather check the folder named 'SmartFaceV' exists in this folder.
  1.f. If the file exists, this means that you have installed, s/w face recognition even if it is not configured to use, skip step 2 and GO to step 3.
  1.g. Else if the file did not exist, this means that the software is not installed, if it does GO to step 2.
  step 2. To install the software of face recognition

  2.a. open 'computer' from the 'Start' button
  2.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
  2.c. double-click "Toshiba."
  2.d. double-click "drivers."
  2.e. double-click "FaceRecognition.
  2.f. Double click on "setup" - one with an arrow going into an icon of sortoff loop.
  2.g. follow the procedure step by step for installation.

  step 3. To configure the software of face recognition

  3.a. open 'computer' from the 'Start' button
  3.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
  3.c. double-click "Program Files."
  3.d. double-click "TOSHIBA."
  3.e. double-click "SmartFaceV".
  3.f. double-click "SmartFaceVSettings".
  3.g. follow the prompts. A word of counsel is to ensure that your face is well lit when you use the software otherwise, you end up spending a day in front of the software trying to get it configures your face with the selected account.
  3.h. To sheck it simply lof out press the "Windows key" AND "key of L."
  3.i. Then you will see the normal login page, click on the "Other" credentials and on the next page, click on "Start Face Recognition" & "Smile" :))

  Check it!

• When changing the 80 GB to 40 GB HARD drive, Satellite M40 does not recognize the drive

  Hi all

  Thanks for coming in! :)
  I recently source two-disc 40GB 2.5 "IDE and intended to run one of them in my Satellite M40.

  The problem starts here:

  (1) I took the original 80 GB hard drive & install the 40 GB hard drive
  (2) start and put in the Toshiba M40 recovery disk
  (3) display screen 'Y' for recovery blah blah blah thing...
  (4) then the screen shows 'cannot be installed because no hard drive found ".
  (5) I boot in the BIOS using F2-> F1, page 2 shows no hard drive

  (6) I try to use my own CD of Windows XP Pro, same thing (as in no hard drive found)
  (7) and the BIOS too show no hard drive found

  The two disk 40 GB is out of mobile work and they formatted it, partition deleted with NOTHING on it. They have also been tested on other PCs (using the converter) using WXP. Two of them work very well!

  Now, the weird thing is that I just can't make it work at least in the Sat - M40. Why is this? Toshiba locked the M40 being one Toshiba-disc is usable?
  Is there a place to get through it? Hidden BIOS?

  I have fixed a large number of PCs, but I can't with this, Please HELP...
  Any response would be appreciated, thanks! :)

  Hello

  The M40 should be able to use 40 GB hard drives with no problems.
  But you must use hard drives with the right interface.
  To my knowledge the M40 supports hard drives with an interface IDE (ATA-6).

  So be sure that your 40 GB HARD drive supports it.

  By the way; Check if your HARD drive supports the good master or slave definition.

• Satellite P100-346 - rather for Windows XP

  I need Satellite P100-346 - rather for Windows XP

  the pilot displayed in the download area of the driver of the 25/08/06
  Its driver Conexant Windows XP 3.11.0.51
  does not work.

  Hello

  Your Satellite P100-346 is a part of the series PSPAAE.
  You have found this series on the Toshiba driver page? I ask because I didn t find him!

  Apparently you have to google for its compatible card XP drivers.
  As far as I know that the laptop uses a chip high definition audio Intel Conexant CX20551-22.
  Try searching on the Intel page. Perhaps you about success

  Good luck