Satellite L670-1KZ - problem for a disc of 3 TB external HARD

I use 3 TB drive Seagate and WD on my Antec external box or grid of storeva very often to back up my data.

The problem is it randomely, I can't disconnect my external hard drive.

Sometimes, it works using HotSwap when connected with e-sata cable, sometimes it is said that my external HDD is still in use and request a reboot, but more dangerous, like today, nothing happens when you use this time this cursed F * tool windows 7 64-bit: "eject the disc safely" through the green icon.

I see my drive external HARD on windows Explorer, but it is completely locked and blocked, frozen. I can wait an hour, nothing changes. The problem is that when I try to reboot my laptop, it crash and I have to manually shut down.

And it's very bad, because after that, when I reconnect my external SD, I still have the same problem, the data have disappeared or are inaccessible.
If I perform a scandisk to repair the damaged cluster supposed-to-be, it hangs at X %, then, I'll have to kill the process, restart, plug the external SD. And then, no error message more, not corrupted data etc etc...
The result is sometimes, no damage, sometimes I have the bad surprise with damaged files, it's Russian roulette!

I never know if my data on my hard drive has been corrupted or not until I test, how for example an original bluray movie that will not play propely because a single m2ts file is dead.

I'm tired of living with fear or crashing 3 TB of data at any time, the 2 TB SD never never will ever face this problem.

* Question: * is at - it solution secure to avoid this problem of ejection of the external 3 to DD permanently or do I have to change my cell phone? I don't have a PC, just my satellite.

With my thanks for your help, I'm desperate.
Guillaume

> Sometimes it works using HotSwap when connected with e-sata cable, sometimes it is said that my external HDD is still in use and request a reboot, but more dangerous, like today, nothing happens when you use this time this cursed F * tool windows 7 64-bit: "eject the disc safely" through the green icon.

Generally, you will not be able to eject safely the external HARD disk, if an application still accesses the HARD drive. This can be a process that runs in the background.
In this case you must close this process in order to eject the HARD disk.
In my case, I couldn't eject the HARD drive because I've downloaded some files from the external HARD drive to my cloud. I had to close all my browser windows just to eject the HARD disk.

But this does not mean that this could be the case even for your question, it may be any process that you know

Tags: Toshiba

Similar Questions

  • Satellite L670-1KZ - update driver & problem with game ARMA II

    Hello world

    I just bought this satellite L670-1KZ in France, and I've already found fews updated.

    But, before you do anything, I want to have comment and recommendation of other owners, to ensure that the files that I have are useful and cannot be damaged something (never know).

    (1) UPDATE RECOMMENDED OR NOT?

    It's the list of the update that I found:

    ATI Mobility Radeon HD 2000/3000/4000/5000/6000 version 11.3 WHQL
    Manufacturer: ATI Technologies Inc.
    Version: 8.831.2.0000
    The name of the inf file: c7115930.inf
    Of date inf file: 03/08/2011
    Date of publication (online): 30/03/2011

    Version of Realtek driver High Definition Audio R2.57 WHQL
    Manufacturer: Realtek Semiconductor Corp.
    Version: 6.0.1.6299
    The name of the inf file: hdapcee3.inf
    Of date inf file: 25/01/2011
    (Online) publication date: 02/09/2011

    Realtek RTL8100/8101/8102/8103/8105/8401/8110/8111/8168/8169 version 7.037.1229.2010 WHQL
    Manufacturer: Realtek
    Version: 7.037.1229.2010
    The name of the inf file: rt64win7.inf
    Of date inf file: 29/12/2010
    (Online) publication date: 02/09/2011

    Realtek RTL8191SE-VA2/RTL8192SE version 2019.1.1203.2010 WHQL
    Manufacturer: Realtek Semiconductor Corp.
    Version: 2019.1.1203.2010
    The name of the inf file: net8192se.inf
    Of date inf file: 12/03/2010
    (Online) publication date: 02/09/2011

    Intel Chipset Device Software version 9.2.0.1025 WHQL
    Manufacturer: Intel
    Version: 7.0.0.1013
    The name of the inf file: ibexahci.inf
    Of date inf file: 06/08/2010
    Date of publication (online): 03/09/2011

    Intel Rapid Storage Technology ICH7/ICH8/ICH9/ICH10/PCH version 10.1.0.1008 WHQL
    Manufacturer: Intel
    Version: 10.1.0.1008
    The name of the inf file: iaahci.inf
    Of date inf file: 11/06/2010
    Date of publication (online): 12-21-2010

    (2) ON THE VIDEO CARD:

    Also, I used an Amilo Xi 2550-8009 underpinning last week, I changed it to this Toshiba, but I am facing a problem with a game ARMA II.
    I got the error message is: 'Pixel shader compilation error', with a black screen and sound of 'ping '.
    I don't understand because I found a comparison test with a GeForce and my current HD5650 which is supposed to support this kind of thing shader.

    Have you managed to run ARMA II on your laptop? If so, what did I miss?

    Thanks in advance for your comments have fully appreciated,
    G2MARS

    Hey,.

    Generally these driver updates are not important if everything works properly. So in your case I don't install these updates if your laptop runs without problem.
    As you probably know: never touch a running system ;)

    Regarding your second question:
    Have you checked if ARMA 2 supports this graphics card? Have you installed the latest DirectX and more recent patch for this game?

  • my computer is grateful is no longer my disc code 45 acomdata external hard

    my computer is grateful is no longer my disc code 45 acomdata external hard

    Hello

    1. have you tried to connect the hard drive to another computer?

    2. what version of Windows are you using?

    See the following link for the version of Windows you are using:

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

    See Code 45 from following link:

    http://support.Microsoft.com/kb/310123

    Run the fixit from following link and:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Please do not respond with answers so that we can send us your request in an appropriate manner.

  • How to search for work in one particular my external hard drive?

    I'm looking for a specific design on my external hard drive.  How can I do a search on this drive

    OK guess I wasn't too clear.  How to do a search on my external hard drive?  Or any search also.  I went to the lower left of the screen and in the box "search" I typed 'redwork.  I got was a Web site.  So, how I'm looking just my disk hard ex.?  I hope that is more clear.

    Thanks, Fredda

    You can search for files, types of files, folders, programs, text contaiined in the folders or files, but not for designs - there is no way to enter a design search.

    I'm sorry.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Need battery for Satellite L670-1KZ (PA3817U-1BRS) information

    Hello world

    I rang just up with Toshiba, I asked for a price for a 2nd battery for my laptop, they told to 150EUR.
    They also said that am 4200mAh battery, as nothing is written on this subject, it is impossible to verify.

    The fact is, I found a battery to 40EUR on internet, compatible with my laptop according to the site, but given to 4400mAh, not 4200mAh.

    Then, I recalled the store who sold me the laptop (DARTY), nothing found on the Toshiba 400-page notice, but, the website of "LA FNAC" announced for my laptop a 4400mAh, not 4200mAh.

    Question: anyone of you bought a 2nd battery for this L670-1KZ which is not a Toshiba original one?

    If Yes, at what price and if all link plse, I'm interested.
    And what mAh?

    I'm confused.

    With our thanks
    Guillaume

    Thanks for your comments!

  • Satellite L670 - strange problems with HDMI connection

    Hello

    I experience problems when you use the hdmi connection:

    My computer: Satellite L670

    Scope: Watch movies on the LCD external (sony bravia) via hdmi

    Computer param: Clone computer - screen plugged - features full power - the screen of the laptop has been set in order to let the computer works normally when closed.

    When you play a movie with the laptop open screen, no problems. I have twice the movie, one on the computer screen and the clone on my external LCD. Perfect.
    But if I close the laptop screen (which would normally have no effect), lagging behind the film on the external display. He stops each 5 seconds for a few seconds and leaves, making it unreadable.

    Did someone had such a problem? Any suggestions?

    Your help will be appreciated.

    If you need to know everything, just ask; (o)

    Thank you.

    When this happens you noticed more often and HARD disk activity flashing LED of the HARD disk on your laptop?

  • Satellite M45-s3553: problems with computer disc dumping and blacking out major

    My laptop just suddenly started to freeze and turn to the while I used it. I have not downloaded any programs or files on it quiet in no time so I'm pretty sure that it s not a new program causing the problem. I just reformat it and installed ONLY MSN messenger.

    As I was talking, flashed a blue screen and then it turned black with the DVD player just clicking several times every 5 seconds that thought he was looking for a disc. I'm not able to turn it on and it does nothing.
    Can someone tell me what happened and what I need to do to correct the problem?
    Any help is greatly appreciated.

    Hello

    Well, very strange question.
    But you are not able to turn on the laptop or the CD/DVD drive?

    If you're not able to turn on the laptop, then you should try to remove the battery and unplug the AC adapter from the laptop. Wait several times (> 15 min) and plug in the battery and the AC adapter. Then, you can try to restart the laptop.

    But if you re not able to activate the reader, then you should check the Device Manager. Check if the drive appears in the list and remove them from the list.
    Then after restart of the new mobile operating system should recognize the drive again.

    The automatically close down might be caused by the malfunction of software or overheating.
    I put t know how old your laptop is, but you should check if the CPU and any other devices are properly cooled. Check if the cooling functioning correctly modules.

    Sometimes the dust and debris is a reason for this closure of the bottom and, therefore, you could clean the fans.
    But if you have no experience so, you should ask an it expert for assistance.

    PS: The vacuum cleaner is a simple tool for fans of cleaning

  • Satellite L670 - update driver for ATI 5650

    Hiya,

    After a few months I just around the audit, if there is no driver update for my model: Satellite L670 with ATI 5650. Apperently Toshiba must approve the pilots to become available to us. Because ATI already has new drivers available, but we are not allowed to install since toshiba does not approve. So we can only download these old way drivers obsolete.

    The thing is thesedrivers have not had an update since February 24th 2011. Or am I wrong? This is unacceptable! newer games run really bad right now with these old drivers. It's horrible!

    Better give us a new driver update as soon as possible! Cause, I can say that I never buy a Toshiba labtop once again, for this reason. And I do not know more ppl are sharing about this than I.

    However, if there are newer drivers available then the:

    8.712.2.1 - a-097311C-Toshiba 100315 stuurprogrammapakket versie
    Leverancier ATI Technologies Inc.
    2D-stuurprogramma 8.01.01.1010 Versie
    Direct3D-versie 8.14.10.0735
    OpenGL-versie 6.14.10.9704
    Catalyst Control Center 2010.1026.2246.39002 Versie

    Please let me know!
    Thank you

    > Best give us a new driver update as soon as possible! Cause, I can say that I never buy a Toshiba labtop once again, for this reason. And I do not know more ppl are sharing about this than I.
    In my opinion, this statement is for Toshiba directly then perhaps you should contact Toshiba s hotline and repeat this complaint.

    You are absolutely right on updated drivers. For mobile devices, display driver update is not very good with respect to the workstations. Manufacturers put offers to update very often, but they don t care about any peripheral damage so if something goes wrong, they'll send you to the manufacturer of the laptop and computer laptop manufacturer will ask which driver you used.

    You know it's pretty stupid, but typical for laptops. New drivers force a graphics card to give better performance. Better performance means higher temperature of material. High temperature on laptops can be very dangerous and can end with overheating or even damage the equipment.
    Who should be responsible if your graphics card will be Burnout?

    You know, this is pretty complicated.

  • Satellite L670-153: problem with a SONY 4 GB mass storage

    I have a portable satellite L670-153 with Windows 7 64 bit. When I conect a 4 GB SONY USB mass storage, Windows install the USB mass storage. But after a few minutes, the USB mass storage is disassemble and assemble and disassemble some indefinitely.
    I update the bios and the driver from the chipset, but I still have the problem.

    And what now?
    You can test the functionality with the other 4 GB USB key? Just to see if other brands will be recognized correctly. The problem when used on another PC with the same operating system?

    I have 2 SanDisk and 1 stick USB Toshiba and each of them are recognized properly on different laptops?

  • Satellite L670-1KZ - MotherCard & hard drive 3 TB - 1 partition instead of 2?

    Nice day

    I have just formatted as my new seagate 3 TB of hard disk (e-sata, external dock) and I have 2 partitions on windows.
    One of the 1.99 TB and another 746 GB.

    I called seagate to ask if I could have a partition isntead of two, because I'll be using this HD for my H1 only Dune.
    The answer was: «it is possible, it depends on your motherboard compatibility drivers»

    Then I called Toshiba, to ask if he was a updated driver for my motherboard, in order to merge my 2 partitions in one. The ref of the motherboard is K000103790 ASSY. No update Toshiba available.

    Question: anyone tried to read a 3 TB (external) on his L670 and successful HD to merge the 2 initial partitions into one? If so, yu has used a third-party software? If Yes, which?

    It's not a big deal, but I'm going to enjoy having a single partition for my use (blu - ray backup for my H1 Dune).

    Hope one of you has the solution

    With our thanks
    Guillaume

    > The answer was: «it is possible, it depends on your motherboard compatibility drivers»

    HEEEE? I've never heard that I m really wondering why a partition usage depends on the motherboard laptop computer s? For me, the explanation given by Seagate sounds really amazing

    > Question: anyone tried to read a 3 TB (external) on its L670 and successful HD to merge the 2 initial partitions into one only? If so, yu has used a third-party software? If Yes, which?

    Why you n t itself-test?
    Usually, you can do this in Windows disk management
    The two partitions of the external HARD drive should be visible in disk management and you should be able to delete a partition and add free space to the other partition

  • Error message "unable to copy the file"hiberfil", it is used by another person or program." Problem copying content from your PC to external hard drive.

    Original title: problem to copy content from your PC to external hard drive.

    I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?

    Concerning

    Pete

    The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time.  When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.

    I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start.  Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has.  The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).

    If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary.  That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.

    It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything.  You can get some imaging software of disc that will also help you.

    It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).

    I would work on figure our why your XP is paste and fix it in place.  XP should not be sticky.

  • IMicrosoft 'Repair disc' has 'uninitialized' my external hard drive

    will have a problem of audio distortion and hit 'Repair disc' for my external hard drive, thinking it could be the culprit.  The program at a standstill.  When I rebooted, my external hard drive would not appear on my computer.  In disk management, it has marked as "not initialized".  It is full of critical data.  What should I do?  I am running Windows XP Service Pack 3 32-bit.  My external hard drive is a Maxtor One Touch II (now Seagate).  Thank you!

    Hi TimYX,

    This problem may be caused by the hardware failure or a bad hard drive configuration. You can try initializing the hard drive and everything should be good. If the problem comes from the configuration or failure, you will lose data and will need a 3rd party program data recovery.
  • Satellite L670-1HD - problem with audio interfaces USB 1.1

    Hello

    I have a Toshiba L670-1HD with an Intel HM55 chipset, and an Intel Core i5 460M processor. I use this machine for my music software and that's why I use different audio interfaces external and USB-MIDI-Controller with build in audio interface like Mixvibes U - Mix Control Pro (http://www.mixvibes.com/content/u-mix-control-pro). These built-in audio interface are connected via USB 1.1. Always when I use this audio interfaces interfaces crash audio internalt - the sound is cracked very hard and there are noises in. The controller of all crashes sometimes too.
    When I use another interface audio as an audio interface Hercules DJ Trim 4 & 6 (http://www.hercules.com/uk/DJ-Music/bdd/p/102/deejay-trim-4-6/), which is a USB 2.0, everything works fine. No crashes, no cracks and no noise.
    You could say now that there is no problem and I should stick to the Hercules interface if it does no problem. The problem is that the Hercules is an audio interface only, there is no controller in it with which I can control my music software.

    I've updated all the drivers from the support page of this site without success. Is there a solution available or the Toshiba knows this subject? Am I the only one having this problem?

    Would be nice if a Toshiba official support employer could respond to this message. But this does not mean that I don't want to read somethng submitted by the user for which an index - all Board/Council/recommendation is welcome.

    Thanks in advance for the help!

    See you soon,.

    Stefan

    Hello Stefan

    In my view, you see the problem from the wrong point of view.
    Toshiba and each laptop manufacturer offer product and hardware and software support. So if there is a general problem with the functionality of the material you are by Toshiba on the right address.

    You use a third party and that you have some problems. Do you really believe Toshiba should support you and help to get this external peripheral work? In my opinion not. On the market, there are thousands of different devices and laptop computer how of the manufacturer must be able to test each of them and offer a solution?
    Something like that is definitely not possible.

    In my opinion, you should communicate with Mixvibes and ask for help. They have the best experience with own product and I presume that they are testing the features on different PC/laptop platforms.
    They should know how the device should work on new laptops with USB 2.0.

    It seems silly now, but Toshiba has nothing to do with it. If you have a general problem with the USB ports and they don t work with different devices that Toshiba should ask for help.

  • Satellite L670-1KZ - 3 TB external hard drive use - transfer rate.

    Hello world

    This thread is a complement of my previous thread on 'Partition for 3 TB HD'.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67275

    As I said previously, I managed to merge the partition into one and I started the backup copy my blu - ray on my 3 TB, HD HD (usb / e-sata and e-sata / usb), my laptop HD (e-sata).

    For your info, when you get to 2 TB (30 MB/s HD to HD and 50 MB/s laptop HD on average up to 2 TB),
    the transfer rate is slowing down in hydro-huileuses, I now have around 10-15 MB/s average, of both laptop HD HD HD (now more than 10 to 15).

    Fortunately, this will affect only around, 740 GB remainning to fill, but it's really annoying over time.

    If someone can get a better transfer rate, please let me know (even on another laptop) your configuration.

    This cursed 3 TB HD is very good for the ability, but a hell to answer when you use HD HD! I can't imagine for 4 TB HD.

    I wonder what may be the transfer speed using usb3 since portable HD... And why he is so slow...

    Guillaume

    Oh, also, I forgot, I had a problem using this Storeva SilverDock U3 with the seagate 3 TB 7200 rpm on my laptop.

    1. it is impossible to disconnect using the safe disconnection. Whenever I switch on my laptop before off the dock. Never know that I won't take the risk to turn it off when it is connected to my laptop.

    2. when using this dock + my Antec MX-1 external box with inside 2 TB HD, I have some problems shooting with my files on the windows 'Explorer', the icon disappears, the image cannot be propely display (.jpg files).

    Maybe a video card problem or a problem of electricity? I say what I'm going to fill this 3 TB as soon as possible and never plug it back to my laptop.

    And, FYI, this dock + this HD is compatible with the H1 of Dune, the loading times are slightly longer than with a 2 to, used as internal or external on the Dune, maybe + 3/5 sec.

    I bought a 7200 RPM, but everyone knows that the 7200 are prohibited for dune used as internal, M1
    must use only 5400 RPM.

    I could make a Bernard for the temperature later and keep posted yu.

    Link to the docking station + HD Ref:
    Free HD 590 GB remaining: a single file of 33 GB = 1 H @ 13 >< 18mo/s="" (dock="" e-sata="" to="" hd="">

    + The message was edited: link removed - commercial websites not allowed.

  • Satellite L670 - keyboard problem - often letters are missing

    Dear Sir

    I have this laptop for 2 weeks and I am not happy with
    (1) internet explore block somethimes (you must stop and restart)
    (2) keyboard: I'm also woring as IT consultant and I noticed that not all type on my keyboard is registered, sometimes there are double rooms but often lack of letters.

    These problems are boring for a new laptop.

    (Note that I bought this laptop because my other had crashed and for my company, I had to have a new a real quick)

    Thanks for the help.
    Greetings from the IND

    Michael
    Moor Service s-bvba
    (Belgium)

    Hello

    Yes, the BIOS may solve this problem had read in this forum about similar issues and BIOS solved this problem quite well.
    After the BIOS update you need to set BIOS to default settings

    Good luck

Maybe you are looking for