C5180 printer. thickness of paper

Similar Questions

• Epson Stylus Photo R2880, tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors

  Tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors. Printing through the standard power supply is perfect. Thanks in advance for your help.

  Standigay

  Tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors. Printing through the standard power supply is perfect. Thanks in advance for your help.

  Standigay

  Hello

  This looks like a good question for the support of Epson.

  Help and Support - Epson America, Inc..:
  http://www.Epson.com/cgi-bin/store/help/help.jsp?BV_UseBVCookie=Yes&category=products

  Concerning

• HP C5180: Printer color problems

  I have a HP C5180 printer and printing color is messed up. My black watch diagnosis page than black, yellow-green with yellow strips, Lt Cyan shows as a dark cyan, cyan is white, Lt Magenta is dark blue, Magenta is Lt. blue. Anyone know how to fix this... I changed the printer cartirdges... the same problem. I cleaned the print heads. several times and followed the suggestions on the tech support pages. I would not only use this printer as a black and white printer.

  Hey @TomTwist,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve print quality problems you are having with your HP Photosmart C5180 all-in-One Printer. Because you have already replaced the ink cartridges and clean the printhead several times nothing is done, there is a good chance to have a defective print head. The print head is what reads the cartridge and puts ink on the page. On your print head template system is a non-replaceable part. Therefore, should that do not pass part a replacement of the entire unit would be necessary. However, I would like to go through the following steps to conveniently solve this problem of quality.

  I won't make you run any printhead more clean. The rule is usually 2 or 3 clean makes no difference at all, don't make a fourth because when you clean the printhead system it uses ink in order to rinse the ink system. If 2 or 3 clean make no difference that you're just wasting if you run a clean more.

  Step 1: Calibrate the colors:

  1. open the printer Toolbox: HP Solution Center. This should be on the desktop of your computer.

  2. If you have more than one printer installed, be sure to select the correct printer tab in the HP Solution Center

  3. click on settings

  4. click on print settings.

  5. click on printer Toolbox.

  6. on the device Services tab, click color to calibrate, and then follow the instructions on the screen. The procedure takes about two minutes and requires two sheets of paper.

  Source: The printed colors are not colors should

  If the problem persists, please continue to the next step.

  Step 2: Align the print head:

  1. click on HP Solution Center's on your desktop

  2. click on settings.

  3. click on print settings

  4. click on printer Toolbox.

  5. on the tab Services of device the printer, Toolbox, click align the print cartridges, and then follow the instructions on the screen.

  Source: Streaks or lines in the printed Image

  Please test print once these two steps have been taken. If the issue of quality still persists, because you have already replaced your cartridges the next step would be a replacement of the entire unit.

  If you want to explore additional options available for your printer, I suggest you contact the Technical Support queue by phone.

  HP Technical Support can be reached at the: 1800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Good luck!

• OfficeJet 6970: Printing on transfer paper

  I just bought this officejet previous photosmart printers owned.  I'm trying to print to transfer paper.  There is no option in this printer to select the transfer paper, to my previous printer there.  I tried printing on transfer paper and the image was blurred and thick.  How can I choose the option to transfer paper?  Try to create special shirts for disney.

  I tried to print on plain paper first and the image came out great, but when you use the transfer paper it was horrible.  Please help this need soon.

  Thank you

  Devil well, then I have a printer that is absolutely useless for me :-(     Thanks for the reply.

• Printers HP 8630 (all-in-one): ON HP 8630 is there a quick way to print from the paper locked tray (using a Mac)?

  ON theHP is 8630 printer a quick way to print from the paper locked tray (using a Mac)?  I normally print from tray 2 and special letterhead in a status bar.  It would be nice to choose letterhead in Tray 1 at time of printing without having to reset the printer manually.  Is there a way?   Jim1949

  Hi @James1949,

  The application, click file and then click on print.

• laser jet pro m402dn: printer says Add paper and it is full

  Yesterday I had a jam in the printer, I found one stuck in the back, so I pulled it out now says set paper needed?

  Run a configuration page in the reports menu on the printer and check paper settings to make sure that TRAY 2 is defined for the letter or one and the type is set to all. It could be the job you are trying to send is looking for a different size or type of paper. If all are correct, the I think the flag that hangs down to determine the paper in the tray dislodged somehow.

• Photosmart 7510 - will not print black on any parameter of photo paper (does not print on plain paper setting)?

  HP Potosmart 7510, printing from a memory card.  Using premium photo paper (glossy), set printer to print on HP Premium Plus Photo), printing out with Black/Brown areas in the blue-green instead of black.  Printing using plain paper, set printer on regular paper, just fine.    Same thing happens when I tried Advanced Photo and a Photo paper - print comes out with a blue-greenish cast in areas that should be black/brown.

  Tried to print a black and white photo - identical to all other attempts - if the choice of the photo options paper, the dark areas are blue/green.

  Comment - then try printing from the computer (wireless), produced the same result - black areas are printed in blue-greenish.

  Tried cleaning the cartridges, alignment printer, print quality status report looks very good.

  Door on this forum and general web search.  Nothing has yet solved problem.

  What should I do?  Any ideas/suggestions?

  Yes, this is the case on a 7510.  I worked on the answer.  Although "ink" diagnostice demonstrates both the black and the cartridges 'photo black' as being low, the 'black photo' was apparently empty.  The black of the photo must be called only because when the print properties are defined for the "photo paper", and when it is empty the black dark areas print in blue-green.  I thought that the black photo cartridge was a gray, for most thin shades grey, but maybe it's an intensifier of some sort.  It's a shame that HP does publish no real information.

• HP ENVY 7640 e-all-in-one: e-mail through mobile phone photo printing. Need to print on photo paper

  New to the forum and new for printer HP (HP ENVY 7640). My question is, if my printer is loaded with paper and photo paper, it automatically by default paper when trying to print photos, e-mail from my cell phone.

  I have to remove the paper from the bin of the printer in order to print on photo paper?

  Hello

  Looks like Yes, you remove normal documents. I ran a few tests on my printer ready 7640 want and he knows the size of the photo paper, that I put (from the screen of the printer), but ONLY 4 x 6 prints.

  Hope this answer your question.

  Kind regards.

• Slow printing when printing on 6x8inch paper. With the help of my new printer HP Deskjet 1514.

  When I print on a page size 6 x 8 inch using black ink, the time taken to print the page is 1 Minute 40 seconds. It is indeed very slow!

  When I print the same exact pages on A4, the time taken to print the page is 15 seconds. This is acceptable!

  I use Windows 7 and Office 2007.

  In addition, no error message is displayed.

  Help, please!

  What are the parameters of type of paper? The speed to 6 x 8 paper resembles results would happen if printing on photo paper.

  If you are printing on plain paper make sure plain paper is selected in the driver.

• Unable to print on letter paper, but allows to print on legal paper

  Original title - printing PROBLEM

  MY PRINTER WILL NOT PRINT ON LETTER PAPER I MISS THE BOTTOM OF THE PAGE IF I PUT IT IN THE LEGAL DOCUMENT WILL PRINT THE ENTIRE PAGE

  [Moved from comments]

  On Friday, April 5, 2013 13:37:08 + 0000, JessieBrooksWL wrote:

  MY PRINTER WILL NOT PRINT ON LETTER PAPER I MISS THE BOTTOM OF THE PAGE IF I PUT IT IN THE LEGAL DOCUMENT WILL PRINT THE ENTIRE PAGE

  Ouch! Please do not yell at us. We can hear you if you type normally,
  in different cases.

  In the print dialog box, you should have a button for preferences.
  There is change of legal to letter.

• Device my printer brother printer had a paper jam. I fixed the jam but it always wiil me does not perform any print job.

  Hello

  My printer has a paper jam. I fixed the jam but it always wiil me does not perform any print job. What should I do?

  Sincerely,

  Misty

  Tuesday, October 23, 2012 13:38:01 + 0000, Misty Doran wrote:

  Hello

  My printer has a paper jam. I fixed the jam but it always wiil me does not perform any print job. What should I do?

  Call brother and ask them to say that a local place that services
  their printers. He brings them and get them to fix it.

  Ken Blake, Microsoft MVP

• LexmarkX1270 of acts that it was printing but the paper comes out blank.

  Since the installation of a new black cartridge in the printer, it works as it was printing but the paper comes out blank.  I tried to reinstall the drivers of cleaning cartridge.

  Let us know what happens after you try with another cartridge.

• OfficeJet 100: Officejet 100 print legal size paper?

  Hello

  I hope that there could be a solution for this. Several users here have a problem with their printers Officejet 100 legal-size paper printing. Below is part of an email I received about this which explains it better that I could.

  «Apparently some of the reps there have problems printing their contracts of legal size on their mobile printers HP Officejet 100.» It's happened for quite a while. The printer recognizes the document as the legal document, but printing is disabled: it begins printing in the middle of the image.

   

  VRP have found a solution: they must go to the printer properties and choose explicitly legal paper in the drop size. It is already selected by default, but if they select manually it will print correctly. The problem is that: 1) it is a manual workaround, they must do so for EACH print, and 2) they frequently forget and have to reprint. »

  They have already tried to install latest print drivers, but that has not helped. Printers seem to operate normally except for this. What could be the cause of this?

  Thank you.

  Hi @chris_hansen,

  Welcome to the HP Forums!

  I noticed that you can not print on legal paper with your HP Officejet 100 on Windows 7. I'm happy to help you!

  According to your specifications of the printerthis printer supports legal size paper, which is good. First of all, I would like to try running our HP print and Scan Doctor, to ensure that no conflict of driver. If all goes well, try the following:

  • Uninstall the software. Uninstalling the printer software.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. Turn Windows Firewall on or off.
  • Create a new user account. Management of accounts of users and connections (Windows 7).
  • Reinstall using the printer HP install wizard for Windows.

  Let me know what happens!

  I hope hear from you soon!

  "Please click the Thumbs up icon below to thank me for having responded."

• Pixma8720 will not be printed on A3 paper, he spits

  I'm a Mac to print on a printer of 8720 Pizma. I am trying to print on A3 paper. I've never had problems in the past and last night I went to print, and it would be the paper then spit and begin to Flash orange. I have checked the ink, reinstalled the drivers and may not know what is happening. I tried printing on US letter paper and it worked fine. I guess this is the reading of the document under the incorrect, but not sure paper size. Any ideas on how to solve this problem?

  Yes, he has worked in the past. I finally thought to it. I had to make sure I was adding the printer settings by using the network of Canon and not Hello or picking it the menu on the fast setting screen. Had to actually click on add printer and choose it from the list.

• HP Photosmart Premium e-All-in-One Printer - C310a re Duplex print on A5 paper

  I tried the double-sided printing on paper format A5 auto and received a message telling me that the paper was too short & to use 'manual duplex' or print "odd or even-numbered" pages instead. (works fine on A4 paper)

  The second option seems a little long breath - but what is "manual duplex" and how are you?

  Hello

  Automatic Print taken Deplexing supported only on letter, Executive, A4, and B5 (ISO) paper sizes, not on smaller sizes as A5.

  You can find this information on page 33 of the below user guide:

  http://h10032.www1.HP.com/CTG/manual/c02516929.PDF

  Manual duplex printing can be done using the Pages to print.

  The application used to print, open the print dialog box, and then click Properties / preferences / Options to access printing preferences screen. :

  • Click Advanced.
  • In the Pages to print select Print odd Pages only .
  • Click OK to print.
  • After the odd numbered pages of the document were printed, remove the paper from the output tray.
  • Reload paper in the paper tray with the White side facing upwards.
  • Return to the drop Pages to print , and then select print even Pages only .
  • Click OK to print.