C6180 scan works very well from the printer to the pc, but hp solution center gives error 4, [(3,42,0)]
Photosmart C6180 wireless unit connected to your PC running windows 7 64-bit ultimate.
Scan worked fine but after some update (I have not seen that and when) stopped scan from the hp Solution Center. It gives an error 4, [(3,42,0)].
If I scan directly from the printer, it works fine, even if I send the jpg for the PC images\Mes traverses the directory.
I already deleted the hp Solution Center and reinstall it using AIO_cda_FSW_Full_Win_WW_130_140.exe
Thank you
hasksm
Hi there hanksm,
I'm sorry to hear about your problems with your Photosmart C6180 and Windows 7 scan and notice you receive the error code. I studied the error and found a position with a person with a 'Solution', so hopefully this will help your situation.
Please see JasonBlake7 post: scanning error
Please let me know how it goes and if you need help!
Thank you
Tags: HP Printers
Similar Questions
-
Have run the HP Diagnostic print comes very well, very good copy. The only problem is when I try to print something on the internet and then it's so blurry that it's barely readable.
Hello Ann,.
Allow me to quickly gather information about the issue in order to guide you in the right direction.
1. what version of Windows is installed on the computer?
2. what web browser do you use to print from the internet?
3A this works much earlier?
4 have have there been recent changes made on the computer before the show?
I suggest you to refer to the links and check if it helps.
Problems printing from the Internet
I can't print or preview before printing a Web page in Internet Explorer
Printing webpages: frequently asked questions
Please post back with the results and we will be happy to help you further.
-
2nd WVC54GCA works very well on the LAN, but I don't see it on the internet
I recently bought a 2nd camera, so I can remotely monitor the 2 places home. The first camera that I put in place with the other default values that address static ip, I gave him, shipped port port 80 and when I type in my dynamic dns name like "http://myname.dyndns.org:80" it works very well, in fact I have same need to type the port number and it works. The dynamic dns used to take me direct to my configuration of routers (WRT54GL) but now I just type in: 8080 to the end to get to the configuration of the router to the internet. In any case, it works well and I can take pictures, live video monitor, movement detected email snaps etc. without any problem.
Then I bought a 2nd WVC54GCA and together to the top of the same thing, he has assigned a static IP address and on the options page I activated the replacement web access port and left port 1024, port forwarded in the router with the new ip address and the port etc. I can access the camera very well via a browser on my local network using the ip address: 1024 or the 'myname.dyndns.org:1024', but I can't access the cam 2nd via the net now. I am confused at this point, I didn't know that a second dynamic dns would be necessary since the device is configured to use a different port, and when I try using the ip address: 1024 it makes no difference anyway.
Am I missing something here?
What I thought was the problem wasn't, I had my port of port of port forwarding on the same number, and when you set the parameter port internal address port forwarding port, which is 80 in the case of the linksys cam.
Once again that I realized that however, 1024 still wouldn't work, so I changed it to 8081 since my routers gui port is 8080, and I had to change the port setting to 81 in port forwarding and add: 81 to my dns address for it to work.
Linksys should be ignored during the first 80 or some thing, or perhaps 80 is the default, because before when I wanted to join my router gui all outdoor I had was my dnyamic dns name without the: 8080, and when I added a cam to the network it would go directly to the cam, unless I specifically set : 8080 to the end.
In any case, I have now the two cams work and accessible. For what it's worth, if there are people from linksys playback of this member of the Board they are terrible docco to explain things, the monitoring software is buggy as all get out and if I struggled as a computer scientist looks at work then the average schmoe stands little or no chance...
My $.02
-
works very well on the shell, but not via cron
Hello
the ghettoVCB works pretty well on my vShpere 4.1 Standard Server run from console. My setup looks like this:
vms2backup.conf: listed three VMs to backup
I have a config file for each virtual machine. That looks like this:
VM_BACKUP_VOLUME = / vmfs/volumes/VMBackup
DISK_BACKUP_FORMAT = thin
VM_BACKUP_ROTATION_COUNT = 3
POWER_VM_DOWN_BEFORE_BACKUP = 0
ENABLE_HARD_POWER_OFF = 0
ITER_TO_WAIT_SHUTDOWN = 3
POWER_DOWN_TIMEOUT = 5
ENABLE_COMPRESSION = 0
ADAPTER_FORMAT = ide
VM_SNAPSHOT_MEMORY = 0
VM_SNAPSHOT_QUIESCE = 0
ENABLE_NON_PERSISTENT_NFS = 0
UNMOUNT_NFS = 0
NFS_SERVER = 172.30.0.195
NFS_MOUNT = / nfsshare
NFS_LOCAL_NAME = nfs_storage_backup
NFS_VM_BACKUP_DIR = MyBackups
SNAPSHOT_TIMEOUT = 15
EMAIL_LOG = 1
EMAIL_DEBUG = 1
EMAIL_SERVER = mail.domain.com
EMAIL_SERVER_PORT = 25
[email protected]
[email protected]The NFS part is not necessary.
I start backing up shell like this: /ghettoVCB/ghettoVCB.sh f /ghettoVCB/vms2backup.conf-l /ghettoVCB/backup.log
When from the backup of shell as mentioned above, everything works fine. In the end, I get an autoresponder email.
But now, when I call this script with the same syntax via crontab, only the first two servers when saved and the script stops until the number of rotation shall take effect from the second server. If the third server is not saved and no e-mail is created.
I have no idea until the problem could be. The hard disk is not full.
Any ideas?
Regards Wolfgang
You can proceed as follows, re - run the script via cron but in your crontab entry, have it configured as follows, where you hit an error that is not connected:
/ghettoVCB/ghettoVCB.sh f /ghettoVCB/vms2backup.conf-l /ghettoVCB/backup.log d debug - c /ghettoVCB > /ghettoVCB/ghettoDebug.txt
It will redirect all the outputs generated during the race in /ghettoVCB/ghettoDebug.txt and see if there are errors.
-
OK so as well Hello world and production apps work correctly on the Simulator... I had some advanced api like blackberry.identity but I removed it because he yelled at me for code signing... I removed the advanced permissions but usually always open... I can see the application in the list of downloads, but clicking nothing
I tried with the sample application engines and the same thing... click on the application icon, but nothing happens...
Once again any word on sim and no not use any "features" except the blackberry.ui (on production app)
blackberry 9630 tour
Thanks for your help!
All the BlackBerry Widgets require the signature, even if you are not using a single line of JavaScript.
The software BlackBerry Widget SDK generates the Java code required to create the widget. The display of web content in a Java BrowserField, which requires a signature. Therefore, all the widgets must be signed.
Code signing keys are usually issued within 2 days of the order, but may take up to 10 business days.
-
Trapcode particular not showing on Render but works very well in the compose window
Trapcode particular not showing on Render but works very well in the compose window.
Hi do not know why it does not appear in my Render.
My computer is not trolling, everything works fine.
My computer specs:
I7 - 5820 k
GTX 970
16 ram
Composition window:
Render:
Try adjusting the comp on camera Active - this is what happens for rendering. I don't know where you got this name of camera or whether it was imported from a 3D rendering, but to be sure to always have the comp set to camera activates when you're overview of your work.
The usual troubleshooting procedure is to go to the bottom of the list of changed properties and start reset first those most suspicious. Many times it is easier if you solo the layer in question.
The first suspicious that I see, it is the position of your transmitter would be behind a normal camera to default position:
If I add a camera by default to a model, add a solid, add individual and then use your position parameters the particles all move out of sight of the camera
After a reset:
-
CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.
There are major problems with this page as shown in the screenshot below.
This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout. This isn't what APDivs were intended. That's why Adobe them removed from DW. Unfortunately, not soon enough.
I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.
Either way, Flash is dead now. Most of the people cannot display Flash media more. You can convert the HTML5 video or use YouTube to host videos now.
Nancy O.
-
I get the following error message: gone the requested resource / is no longer available on this server and there is no forwarding address. Remove all references to this resource. Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument directive to manage demand. IE & Chrome work very well - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I need to give up Firefox. Thank you.
Found the problem - it's a HT Access file on the site itself. Deleted the file and 10.0.2 works very well.
-
My HP officejet 4500 works very well on my Toshiba laptop (my computer only and not shared) but windows has an error message saying that the printer driver. How to stop this message?
Visit the HP website and download the driver you need.
Good luck.
-
I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now. When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc. The itunes gives error me is "make sure that your network connection is active and try again. When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed). I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks. The help and support center will not be to the point after that I click on it. I use windows xp sp3 home edition 2002. I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success. I don't know what to do at this point but to restart the system. Please help, any suggestions? Thanks in advance.
Hi unlucky2013,
Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I have the UI which downloads the file in file multiprt transfer in chuncks (blob file). It worked very well in a previous version of firefox when we send chuncks 10 MB for each ajax calls. But now in the last version of firefox, its get rejected for 10Mo chuncks with every call, but allowing only 4 KB be sent for each call. You guys could help me. I also tried with the Application (/ octectstream). It also works very well in all browsers.
Hi Sivasathy, support.mozilla.org is intended for management of the end user. If you have questions about web development please refer to the place to go for support the developers instead. Thank you for your understanding!
-
iOS 9.3 made connection kit hands free bluetooth to my Audi stuttering.
Both the speaker and the stuttering/pulse microphone so that you cannot speak/hear.
Using googlemap-app with instructions of the Tower burn via bluetooth still works very well, his is perfect.
It's an iPhone 6s and the car is an Audi A6 2010 with the Moose Bluetooth adapter business.
Another 6s to 9.2 iOS iPhone works fine with bluetooth hands-free, just like my phone before the upgrade.
I tried to disable the twinning, remove all old in the car and the iPhone and pair Bluetooth devices again.
Anyone alse experinceing this?
And tip on how to fix it?
I have the same problem with Audi Q7 2008 and iPhone-6s - iOS - 9.3.
-
AOL 9.6 works very well since XP account administrators but... any other account on the PC when AOL sign on it immeadiately can sign with "AOL had a problem and had to sign. Any ideas? AOL gave a bad scripted reload all the response of the AOL software.
Thank you
Hi Splinter1,Try the steps listed in the article below and check if it helps fix the problem:If this does not help, contact AOL support better. -
Webcam worked for months but is not, nor in the Device Manager. When using Skype it says buy a webcam!
Hello
I suggest you to follow the steps from the link provided below and check if it helps:
HP Notebook PC - test Webcam Vista with QuickPlay
http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00865850&lang=en&cc=UK&TaskID=125&ContentType=SupportFAQ&prodSeriesId=3687621&prodTypeId=321957Hope this helps,
-
I just bought a windows hp all-in-one 8. My Kodak 6.1 office hero will not work in scan. works fine on my notebook wind 7. does it all, pull the hair. Help!
Did you ever get an answer for this question because it seems to be too demanding?
Maybe you are looking for
-
How to set up the AppleTV on WiFi dual band network
Hello At home, I have a modem/router double band in a Hitron CGN3 installed, providing 2.4 G and 5G wifi access. However, the dual band seems not suitable for airplay, because they cannot communicate with each other via the double frequencies. Device
-
I tried the suggested enter config in the address bar, etc, but for the next step "at the top of the screen is a bar of research." there is no search bar.
-
: 6000 #1 IDE ERROR after disk replacement
Hi I have a couple of SP6000 and there a mounted DVD/CDRW (UJDA720 model number) who is unable to read the headlines, just hunting all the time that a disk is in the drive. I replaced the drive with 2 identical units called, but I get the message on
-
As the title says... I deleted my database of bookmarks my mistake... I thought it would only remove Firefox 4.011 b folder, but he deleted them also for Firefox and Firefox 4.012 standard b...
-
I have an emachines T6534 and whenever I start my computer, I would get an error stop 0 x 00000024. I ran chkdsk on my other computer with the hard drive and it seemed to fix the Blue error screen. But now, whenever I log in, it takes 15 minutes to l