C7250 Installer

Similar Questions

• C7250 installation problems

  Running Win 7 64 bit. Downloaded latest driver package. Installation went well and the wireless setup. After the opening of Solutions Center get the message "device is not complete. Also downloaded Update critical Windows for networking - no change

  Also to the printer and checked SSID and password - went well

  Hello. Try running the installer again. You should see an option called "add a device". Select it and follow the instructions to install the wireless printer and tell me if this solves the problem.

• HP photosmart C7250 installation language

  The children were playing with the printer and recklessly got the menu setup on the display in German. Can someone please help this old 70 year in English get? Thanx

  Hello BishBuckle,

  Best way to, if you can't read German gives the unit a partial reset. This can be done by following the steps on the website tht you can open by clicking HERE.  The Web site indicates that it is intended for the series C7100 but the procedure should also work on your model. Know that a partial reset will do the following-

  • All the parameters of the user menu are reset to the default values

• C7250 connected wireless works with wired ethernet PC but not wireless PC

  C7250 installs fine with static IP address and wired (ethernet) PC works perfectly, but is not recognized by the PC wireless.

  Can ping the IP of the PC cable but not wireless computers.

  Can connect to the IP address of the browser and can logon to the wired PCs of wireless computers.

  When the wireless PC is connected to the network with ethernet cable the C7250 works perfectly.

  Firewall is not the issue because I tested with the firewall disabled.

  Any suggestions?

  Thank you for your help.

  I FINALLY FOUND a RESOLUTION but let me describe what I've done to isolate the problem so that others will not do the same things I did.

  I used my Windows CE PDA and connected to the wireless router. I made sure that IE could access a different print server wired for a Brother HL-2140 I 192.168.2.10 and it worked. Who checked out that IE was working with a wired device. I then went to Yahoo!, and it worked. Then, I tried to access the C7250 configuration using IP 192.168.2.20 address in IE and it failed. (I checked with my Wired PC I could have access to the configuration of C7250 via IE.) I expected this result.

  Then I connected the PDA via USB and verified that I could use it to access the configuration of C7250 use IE on the PDA and it worked.

  I then tested between two wireless PC. Could not connect to each other through the router. But if one of them has been wired and one wireless they connected and I have consulted the disks between computers. I also tested the two cables with the same results.

  THE PROBLEM WAS IN THE ROUTER.

  These tests again virtually eliminated all PC, firewalls (since I've tested with the firewall disabled), the C7250 and the print server for the HL2140 brother as being the source of the problems.

  I then updated the firmware of the router to the latest version and repeated all the tests carried out in the complete thread and had the same results.

  RESOLUTION:
  The router I was using was a Linksys WRT54GS Ver 1.

  I also had a backup router which is a Linksys WRT54GS 7 worm that had the same settings as the Router 1 worm.

  I changed the SSID of the original router (Ver 1) so I would not need to change the SSID in all my devices during testing with the router Ver 7.

  I checked the firmware on the router worm 7 was the later and pulled up.

  The first test I did was to use a ping wireless PC the C7250 192.168.2.20 and it worked!

  I then used the wireless PC and IE to access the configuration of C7250 192.168.2.20 and it worked!

  I then checked the port for the C7250 was still a TCP/IP port to 192.168.2.20 and sent a test page to the printer and it worked!

  I consulted quickly wireless configuration C7250 and printer a test of a PC cable page and that worked!

  Finally, I tested PC wireless wireless PC PCand wired PC and the dirves successfully in both directions and checked that PC wired to wired PC was still working as before.

  All that remained was to supply two routers and router swap 1 worm with the Ver 7 router and rerun the tests with the router to Ver 7 manage my real network. Everything works as it should.

  I'll keep Router 1 worm as a backup to the Ver 7 knowing router unless the router worm 7 does not only feature that I lose when I reinstall the Router 1 worm is wireless connectivity to wireless, and I can temporarily work around until I get another router that is likely to be a "n" because what is have is ' G;

  THANK YOU FOR ALL YOUR HELP PRINTDOC!

  PRINTDOC BRAVO!

• fatal error installation software photosmart c7250 on windows vista 32 bit

  Problem with uninstall and install the driver software print on my PC - printer is HP Photosmart while a C7250 - wireless network connection

  My printer worked for many years.  Then some of the features of the photo printing had stopped working - I think because there may have been a conflict with several on my PC HP printer drivers.  So I tried to uninstall all the HP software (via the uninstall of the window).  All successfully uninstalled except:

  C:\Program files/hp/digital imaging\esupport\hpzscr01.exe

  C:\Program files/hp/digital imaging\ocr\hpzscr01.exe

  C:\Pro...

  C:\pr...

  I could manually the files to uninstall the first 2 because I could see where they were.  But I have no idea about the other 2 given that the error did not display name as you can see.  I tried to install anyway (using the HP Solution to install errors - Windows Vista).  Followed all the instructions.  Installing the latest driver/software (downloaded from the HP site) obtained in what concerns my wireless printer detection; then it gets stuck at the stage of configuration at 96% for 15 minutes - DURATION situation 07417929 error code.  Help!  I think it is because I can not uninstall these ghosts files.  does anyone have advice?

  ---------------- More INFO ---------------------

  After the above, I am able to print in the way of basic - but my HP Solution Center software and not operational.  Message when I try to open Solution Center is "no devices found habe HP."

  I have a LOG file with some PRT screens that I wish I could join this note (can not know how to do).  It can give some more errors.

  I finally solved this problem.  The solution was to perform a full system restore on my PC - returned to the factory settings.  Do windows, software updates re - load manually (including the software of pinter), manually the saved copy of data.  It seemed to work.  So everything comes into conflict that was on my PC was a bit too complex to adhust without having to do this VERY long process.

• For C7250 all-in-One under Mac Yosemite connectivity issues

  I've recently updated to Mac OS Yosemite 10.10.2

  After that, I have experienced the following problems with my printer of HP C7250 (connecetd via USB):

  1)

  The registration of the product is suspended

  When I tried to reinstall the HP of CD the HP Installation Wizard software to "Web registration" step, where it crashes. You can click on 'Register' as often as you like, nothing happens.

  If I select "Register later" it does allow me to choose 'Yes' to confirm.
  Basically, I'm stuck at this step.

  However, the printer comes and I can try to send files to it.

  2)

  I also noticed that the verification of the software updates using the HP Device Manager seems to hang.
  I wonder if there is some sort of current connectivity problem?

  3)

  The outcome is that the file does not print.

  When initially, I tried to print, I got an error 'Arrested - filter has failed' and a crash report that goes directly to Apple.

  After the printer is disconnected and the installation of the recommended Apple software upgrade for HP in Yosemite, the crash when printing has transformed at a glance:

  After trying to print a file to a page with text and a picture, it makes "1% complete" and stops.

  I have tried to reinstall the HP software twice, restart the Mac, disconnect and reconnect the printer, no luck.

  Maybe I have everything in the right order. Don't know where to go from here - any suggestions would be greatly appreciated!

  Hello

  Check first of all in the Applications folder and look for a Hewlett-Packard folder.

  If there is there such a don't forget to follow the uninstaller to remove any software from your Mac incopmpatible.

  Then manually remove drivers by following the two methods:

  First reset the printing system as listed to 10.9, the steps are the same.

  Then follow the steps under "second method: uninstall the printer software > I used Apple Software Update to install the printer software ' below:

  http://support.HP.com/us-en/product/HP-Photosmart-C7250-all-in-one-printer/3204782/model/3382182/document/c02259020

  Once you have finished uninstalling follow these steps to reinstall the driver by running Apple Software Update and adding the printer:

  http://support.HP.com/us-en/document/c04510394

  If you are still having problems install this package and the Coachman for the difference:

  http://support.Apple.com/kb/dl907

  Please let me know of any difference,

  Shlomi

• c7250 network connectivity issues

  I searched through all the posts and has not found any help for my problem (after trying everything I came on) so this is.

  I have just received, as a gift, the C7250 AIO and impossible to get it remains connected to a network cable or wireless.  When I install the device (either wireless or cable network), the unit works fine, but when I shut down or restart the device is not connected.  If I have "My Computer", open, both the network c7200 icon will be there and then disappear.  The same thing with the c7200 scanner icon.  He will be there, and then disappear.   Enter the printer and Faxes folder, I see similar symptoms.  The printer (and fax) will appear online (ready), then jump off (offline).  If I look at the two windows the device appears and then disappears.  No problem with the device when connected to a USB cable.

  I've uninstalled and reinstalled the software probably 6 + times and spent 2 days trying to make it work.

  I am running Windows XP, with a Netgear router (I just bought that today, thinking that my router Linksys could be the problem, but the printer reacts the same thing with both routers).  I have also been devoted to the installation of the printer and created a new port (192.168.1.160) in the hope that it could solve the problem, but not luck.  I disabled my McAfee (to disable the firewall), but that did not help.

  My daughter has one from a source other than mine (so it isn't the same batch), and it has similar problems.  Here now, returned, once again, gone.  It's the same symptoms.

  Any help (before returning the printer) would be appreciated.  It works fine on USB but I need the capabilities of the network printer.  Is this just a problem with printer HP networking?  Oh, by the way, if I display "manage network" McAfee in their 'Security Center' or run a network monitoring program, the printer's IP address is always there and always constant.

  TIA,

  Rich

  I forgot the 1st Comandment of computing.  Look for the updates.

  There, on the page of the software, was a patch/update software called, "Critical update to enhance reliability of network and USB connectivity and improve system responsiveness while printing".

  Once I ran the update that all my problems disappeared and the printer works well (no connectivity problem, no stop error and my system is back up to normal operating speed).

• HP C7250 'configure' itself whenever I try to scan!

  I recently had to reinstall my C7250 after reload Windows XP. Since then, when I try to scan anything, I get the following dialog box: "Please wait while Windows configures Scan" is a progress bar in the dialog box and the message, "Collecting information" appears. This can be very long and it is quite annoying. Anyone has any ideas on this one?

  Message edited by LazerFlash on 04/01/2009 15:53

  Solution:

  1. download and install Windows Installer Clean up Utility from microsoft Web site. Download it by clicking here

  2. once it is installed, you can run it by clicking on the link located at the end of your list of all programs (click Start > all programs)

  3. it will open a new window with a list of software that that can be found on your computer

  4. search Scan and select it and then click on the button Delete

  Don't worry, it will not uninstall it.

  I hope this helps. Please let me know if it is resolved. Thank you.

• Photosmart C7250: Driver for Windows Vista

  My Photosmart C7250 worked well until two days ago.  Then, it would not scan a document.  Tried to uninstall the driver, who seemed successful.  Then at HP.com, but did not find the driver for Windows Vista.  Used the original installation disc, but that doesn't seem to help.  How can I get the current driver for Photosmart C7250 for Windows Vista?

  Hi @OldC7250,

  Welcome to the HP Forums!

  I see you are trying to find the driver for Vista for your HP Photosmart C7250. I'm happy to meet you!

  To download the software, please visit this site, HP Photosmart C6200, C7200 and C8100 all-in-one software full function and drivers.

  If it still does not after reinstallation, please give our HP print and Scan Doctor a try and let me know what happens!

  Hope this information is useful and thanks for posting!

• Installation of printer software program did nothing

  Hi, I just bought a HP desktop computer running Win 7 Pro SP1 again.

  Downloaded from the HP Web site more complete sw for HP Photosmart C7250 printer software (released in 2009, Version 13.1.0).

  (1) using the Wizard installation and download of HP:

  The download was successful. After the installation process has started (and after confirming the safety message) the hanged Wizard. The bar has shown 100% downloaded and extraction showed 100% copmpletion, but nothing happened thereafter. No files showed up everywhere and the actual facility never began.

  (2) use an open direct file of extraction: Extraction done, but nothing happened thereafter.

  (3) use WINZIP to open archive manually and start the INSTALLATION. EXE in the folder, but nothing has happened later.

  (4) use compatibility mode, nothing.

  (5) use administrator mode compatible and right, nothing.

  Help, please. What else is more ridiculous than faling to run HP software on HP hardware?

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7 restart your PC
  8. run the installation file and check all difference.
  9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

  If the steps above does not help to solve the problem, open the Device Manager and devote the processor category, if you have an AMD processor trying to install the patch below:
  http://ftp.HP.com/pub/softlib/software12/COL40390/OJ-98352-1/HPAMDC50PATCH.exe

  Kind regards
  Shlomi

• c7250 all-in-one: the network but not settled on laptop

  So, I'm new to this.  I have photosmart c7250 all-in-one.  My laptop has windows Vista premium edition.  Whenever I'm trying to install the printer, it shows no printer found.  I can find it via the control panel when I add a printer.  My laptop computer and printer are both active on my wireless network.  I can even print to it wireless.  It will spit out a blank page before every page it prints.  The printer is not only found during installation.  I got the printer working fine before.  I had to get my laptop, now I have this problem.

  I tried once more after the last message.  It worked this time.  However, I disabled my security only long enough to install.  I can shoot HP gacé Gallop again once and I don't have a blank paper before the test page.  Thank you once again.  I had tried for months until what someone told me that these forums exist.  Thank you!

• Wireless Photosmart C7250 AIO is printing slow response time

  I recently had to reinstall my XP OS.  Since then, my C7250 takes up to 30 seconds to respond to the command 'Print' when using wireless.  Once it starts printing, it moves all along.  If you use the USB connection its response time is instantaneous, as it was wireless before my OS reinstall.  I made no changes to my router Netgear WGR614 v6 to more settings of the reinstall.  Any thoughts there?

  Remove your printer from Control Panel > printers, then:

  Verify that you can access the web page internal to the printer by its IP address.

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• Crashing apps and the slow performance since the installation of macOS Sierra

  Hello

  Im a user of long date Mac but displays the first time that I was pretty happy with everything that on my macbook pro for the past years... until I installed Sierra a day ago.

  Since installing everything works super slow and a lot of my apps hang and crash. Things are not rosy, here is my EtreCheck report - running current version 10.12 on my MacBook Pro (mid 2010) if anyone can help would be much appreciated. Thank you

  EtreCheck version: 3.0.6 (315)

  Report generated 2016-10-07 16:52:11

  Download EtreCheck from https://etrecheck.com

  Time 06:53

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Apps are broken

  Hardware Information: ⓘ

  MacBook Pro Intel Core i5, Intel Core i7 (mid-2010)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro6, 2

  1 2.53 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 371

  Video information: ⓘ

  Intel HD Graphics

  NVIDIA GeForce GT 330M - VRAM: 256 MB

  Color LCD 1440 x 900

  Software: ⓘ

  macOS Sierra 10.12 (A 16, 323) - since startup time: less than an hour

  Disc information: ⓘ

  Hitachi HTS545050B9SA02 disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  BOOTCAMP (disk0s4) / Volumes/BOOTCAMP: 86,37 (Go 31,68 free)

  Macintosh HD (disk 1) / [Startup]: 412,50 (GB 158,46 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 412.88 GB Online

  MATSHITADVD-R UJ-898)

  USB information: ⓘ

  Logitech USB receiver

  Card reader Apple

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [no charge]. Huawei.driver.HuaweiDataCardDriver (4.0.6 - 2016-10-04) [Support]

  com [loading]. Logitech.Control Center.HID Driver (3.5.1 - SDK 10.0 - 2016-10-04) [Support]

  com [no charge]. Driver Logitech.Unifying.HID (1.2.0 - SDK 10.0 - 2016-10-04) [Support]

  [no charge] com.leapfrog.driver.LfConnectDriver (1.0.6 - SDK 10.0 - 2016-10-04) [Support]

  NET [no charge]. Thomson.iokit.USBLAN_usbpart (1.6.0 - 2016-10-04) [Support]

  Startup items: ⓘ

  HWNetMgr: Path: / Library/StartupItems/HWNetMgr

  Startup items is no longer function in OS X Yosemite or later

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  tasks of Apple 178 [loading]

  tasks of Apple 86 [performance]

  Launch system demons: ⓘ

  [no charge] 42 tasks of Apple

  tasks of Apple 167 [loading]

  tasks of Apple 95 [performance]

  Launch officers: ⓘ

  [performance] com Logitech.Control Center.Daemon.plist (2011-11-05) [Support]

  [loaded] com.adobe.AAM.Updater - 1.0.plist (2015-09-18) [Support]

  [cannot] com.adobe.CS5ServiceManager.plist (2010-07-14) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-13) [Support]

  [cannot] com.teamviewer.teamviewer.plist (08 / 08/2015) [Support]

  [cannot] com.teamviewer.teamviewer_desktop.plist (08 / 08/2015) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.SwitchBoard.plist (2010-07-14) [Support]

  com.Adobe.agsservice.plist [running] (2016-08-19) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-30) [Support]

  [loading] com.apple.installer.osmessagetracing.plist (2016-09-14)

  [loading] com.google.keystone.daemon.plist (2016-09-02) [Support]

  [loading] com.teamviewer.Helper.plist (2015-03-03) [Support]

  [cannot] com.teamviewer.teamviewer_service.plist (08 / 08/2015) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2010-07-16) [Support]

  [loading] com.adobe.ARM. [...]. plist (2011-09-13) [Support]

  [loading] com.adobe.ARM. [...]. plist (2010-07-14) [Support]

  com.nero.HSMMonitor.plist [running] (2016-10-07) [Support]

  Plug-ins Internet: ⓘ

  DirectorShockwave: 12.0.6r147 - SDK 10.6 (2013-11-25) [Support]

  OVSHelper: 1.0 (2010-12-10) [Support]

  OfficeLiveBrowserPlugin: 12.3.6 (2013-03-22) [Support]

  NP_2020Player_WEB: 5.0.7.0 (2011-04-03) [Support]

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-09-18) [Support]

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-29) [Support]

  AdobePDFViewerNPAPI: 11.0.10 - SDK 10.6 (2014-12-03) [Support]

  DivXBrowserPlugin: 2.1 (2010-12-10) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-14)

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-29) is unable to contact Adobe

  iPhotoPhotocast: 7.0 (2010-07-14)

  Silverlight: 5.1.30514.0 - SDK 10.6 (2015-01-17) [Support]

  AdobePDFViewer: 11.0.10 - SDK 10.6 (2015-03-29) [Support]

  JavaAppletPlugin: 15.0.1 - 10.12 (2013-10-25) check the version of the SDK

  User Plug-ins internet: ⓘ

  Picasa: 1.0 (2011-03-29) [Support]

  Safari extensions: ⓘ

  DivX HiQ - DivX, Inc. - http://www.divx.com/en/software/divx-plus/web-player/ (2010-12-21)

  DivX Plus Web Player HTML5 < video > - DivX, Inc. - http://www.divx.com/en/software/divx-plus/web-player/ (2010-12-21)

  3rd party preference panes: ⓘ

  DivX (2010-12-10) [Support]

  Flash Player (2016-08-30) [Support]

  Logitech Control Center (2011-11-05) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% kernel_task

  5% WindowServer

  1% com.apple.AmbientDisplayAgent

  1% xpcproxy

  0% fontd

  Top of page process of memory: ⓘ

  Kernel_task 432 MB

  Mdworker (15) 430 MB

  Airmail beta 283 MB

  152 MB Finder

  Sandboxd 147 MB

  Virtual memory information: ⓘ

  476 MB free RAM

  3.53 GB used RAM (1.41 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  7 October 2016, 16:39:48 Self test - passed

  7 October 2016, 16:20:48 ~/Library/Logs/DiagnosticReports/Airmail Beta_2016-10-07-162048_ [redacted] .crash

  / Applications/Airmail Beta.app/Contents/MacOS/Airmail Beta

  October 6, 2016, 08:17:31 PM/Library/Logs/DiagnosticReports/App Store_2016-10-06-201731_ [redacted] .hang

  / Applications/App Store Store.app/Contents/MacOS/App

  October 6, 2016, 07:52:21 PM/Library/Logs/DiagnosticReports/station air Beta_2016-10-06-195221_ [redacted] .hang

  October 6, 2016, 14:37:32 /Library/Logs/DiagnosticReports/Preview_2016-10-06-143732_[redacted].hang

  /Applications/preview.app/Contents/MacOS/preview

  October 6, 2016, 02:37:26 PM/Library/Logs/DiagnosticReports/station air Beta_2016-10-06-143726_ [redacted] .hang

  October 6, 2016, 14:37:22 /Library/Logs/DiagnosticReports/firefox_2016-10-06-143722_[redacted].hang

  /Applications/Firefox.app/Contents/MacOS/Firefox

  October 6, 2016, 14:37:18 /Library/Logs/DiagnosticReports/Pages_2016-10-06-143718_[redacted].hang

  /Applications/pages.app/Contents/MacOS/pages

  October 6, 2016, 14:37:12 /Library/Logs/DiagnosticReports/AdobeAcrobat_2016-10-06-143712_[redacted].hang

  / / Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat

  October 6, 2016, 14:36:50 /Library/Logs/DiagnosticReports/Preview_2016-10-06-143650_[redacted].hang

  UNKNOWN PATH

  Try this first: what happens if you start in safe mode (hold down the SHIFT key during startup), the problems go away?

  Try this second in normal startup mode: what happens if you create a new user account and log in as that user, the problems go away?

  I'm not sure I'd worry about the plane crashes - it is listed as beta software

• Installation of the Sierra

  It is essential to backup prior to installation of the operating system Sierra?

  Yes. It is always essential to backup before starting any kind of a major project as an upgrade of the operating system.

  Old saying IT: it is always best to have a backup, no need then to need a backup and not have it.

• After the installation of Sierra, calendar does not work

  After installation of Sierra, when you open the calendar on my Mac, missing entries and the screen is frozen with the comment 'Moving calendars to the server account.' I signed that I the cloud to see if it would help, but I still have this problem.

  Hello and welcome to Apple support communities, Stanley Star.

  If I understand your message to the right, at the opening of the calendars for the first time after upgrading to Mac OS Sierra, you are missing calendar events and the app is frozen with a message saying "moving to Server account schedules. Calendars, this is one of my apps used on my Mac, so I certainly understand the importance of having the opening and operating as usual. I'm happy to help you to turn it on again!

  Icloud and a signature was an excellent step to try. Here are the steps I recommend to do next:
  

  1. Check that the date and time are correct in your Mac by following the steps in macOS Sierra: set the date and time on your Mac.
  2. Close the present calendars on your Mac. If you are also reminders, close that as well as reminders and schedules work together. If the calendars close normally, will not force close it by clicking the  in the upper left corner of your screen, select force to close, select the calendars in the list of open applications, and then click the button close Force.
  3. Go to System Preferences > iCloud and uncheck the boxes next to the calendars and reminders.
  4. Restart your Mac.
  5. A times restarted, open again your calendar application, select "Calendar" in the Apple menu bar in the left corner of your screen, select "Add an account", choose iCloud and sign in with your Apple and the password.
  6. Give your calendar some time to sync and charge all your data. Once it is loaded successfully, and you can see all your events, open the reminders and do the same steps for signing in iCloud there are also well.

  Thank you for using communities of Apple Support.

  Take care.