Installation of printer software program did nothing

Similar Questions

• BEX errors during the installation of the software/program updates

  I have recently upgraded to an SSD and a new drive hard on my PC and thought, everything was going well until I started to reinstall and update my old programs, where I keep coming across mistakes BEX I can't work around with my computer DEP settings. When I try, I get an error message stating, "this program must run with Data Execution Prevention (DEP) enabled. You can't turn off DEP for this program.

  Is it possible that I can get around this error in order to update my programs, or am I stuck with the ever-growing list programs I can is no longer updated accordingly?

  - - - - - - - - - - - - - - - - - - -

  Signature of the problem:
  Problem event name: BEX
  Application name: whql-radeon-software-crimson-edition-16.1-64bit-win10-win8.1-win
  Application version: 0.0.0.0
  Application timestamp: 54336eaa
  Fault Module name: ltc_game32 - 106568.dll
  Fault Module Version: 1.0.0.1
  Timestamp of Module error: 566 b. 4799
  Exception offset: 000aaf89
  Exception code: c0000417
  Exception data: 00000000
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 7ba8
  More information 2: 7ba8a4bc43675385b12d0091164f5b9a
  3 more information: 3b 02
  Additional information 4: 3b02768676ca2422774930b07cabbc60

  Signature of the problem:
  Problem event name: BEX
  Name of the application: 1_CyberLink_PowerDirector14_Ultimate_Upgrade_VDE150831 - 02.exe
  Application version: 0.0.0.0
  Application timestamp: 4fd34d75
  Fault Module name: ltc_game32 - 106568.dll
  Fault Module Version: 1.0.0.1
  Timestamp of Module error: 566 b. 4799
  Exception offset: 000aaf89
  Exception code: c0000417
  Exception data: 00000000
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 7ba8
  More information 2: 7ba8a4bc43675385b12d0091164f5b9a
  3 more information: 3b 02
  Additional information 4: 3b02768676ca2422774930b07cabbc60

  Signature of the problem:
  Problem event name: BEX
  Name of the application: 2_CyberLink_PowerDirector14_ContentPack_Essential_PCP150526 - 06.e
  Application version: 0.0.0.0
  Application timestamp: 4fd34d75
  Fault Module name: ltc_game32 - 106568.dll
  Fault Module Version: 1.0.0.1
  Timestamp of Module error: 566 b. 4799
  Exception offset: 000aaf89
  Exception code: c0000417
  Exception data: 00000000
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 7ba8
  More information 2: 7ba8a4bc43675385b12d0091164f5b9a
  3 more information: 3b 02
  Additional information 4: 3b02768676ca2422774930b07cabbc60

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I understand that you have problems during the installation of the software. This problem is possibly due to several reasons such as security software that can be installed on the computer, any program or application that is running on the computer on the bottom, or due to some errors on the hard drive of the computer.

  Method 1: Run the clean boot

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot

  How to perform a clean boot in Windows

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Method 2:

  Please see the advice given in the link given by Shinmila: 28 March 2010:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/cannot-disable-DEP-for-certain-programs/d5352d1e-11AC-4254-ad3f-c0ecb85311f0

  Let us know if you need more assistance. We will be happy to help you.

  _________________

  Thank you best regards &,.

  Isha Soni

• Printer says "Ready" and test printed, but he did nothing?

  After following all the instructions, by pressing print, does nothing

  Hi RayWhite,

  1. did you of recent changes on the computer?

  2. What is the serial number and model of the printer?

  3 when was the last time it was working fine?

  See the link below and run them the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

• "Installation of printer * software message USB.

  Hey guys.  I'm trying to install HP Photosmart C4780 to a new dell Inspiron computer.

  When I click on install, I get these messages.

  "This computer has no USB software necessary support to allow for the completion of a USB installation.

  "This computer has no hardware support enabled to allow for the completion of a USB installation.

  But he didn't tell me precisely how to solve these problems.

  Anyone know how I can get this sorted out?

  Appreciate any help.

  What special Inspiron model?

  What version of Windows is installed and is the version that came pre-installed from Dell or have you installed Windows yourself?

  Other USB devices work?

  Assuming that the answer to the last question is Yes, then the following should work for you:

  A.

  • From Windows Explorer type folder in the address bar and press ENTER.
  • Locate and open the most recent HP installation folder, which begins with 7z (e.g. 7z1234a).
  • Open the installation folder.
  • Locate the file named usbready.exe, rename it to usbready1.exe.
  • Go back up a level and start the Setup.exe program.
  • Now follow the installation and check for the difference.

  B. (if you can't find a HP installation folder in the temporary directory)

  • Cancel the installation.
  • Extract the installer to a folder using 7 - Zip or similar.
  • Navigate to the folder, and then in the Setup subfolder.
  • Rename usbready.exe to usbready.exe.bak.
  • Run setup.exe from the root folder and the installation should proceed as usual.

  7-zip is free from here: http://7-zip.org/

• OfficeJet Pro 8610: complete installation of printer - computer laptop doesn't have a CD rom

  In order to complete the installation process, the instructions say to insert the CD supplied with the printer. My laptop does not a CD rom so I cannot insert the CD-ROM. How can I complete the installation?

  Thank you

  Hello

  If your operating system is available, you can download driver for installation:

  Printer software e-all-in-one-HP Officejet Pro 8610 & drivers | HP® Support
  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610-e-all-in-one-printer-series/5367603/model/5367606/drivers

• HP Photosmart c3180: printer software did not install

  Hello

  I recently upgraded my PC and installed a new motherboard. Now, I've had my C3180 printer for 5 years now, whenever I have installed the printer software, I have had no problem on one of my computers. The software in question is the HP all in one series to my printer.

  Now here's the problem, after setting up my new PC, I'm trying to install the printer drivers to use the scan etc. The error is the software constantly gives it's when I try to install: cannot find USB drivers and a USB device "this computer has no support USB available for this installation. I tried the program several times and he refuses to install.

  Well, here's the catch, I installed all my USB motherboard etc drivers correctly and they all work. All my USB devices, keyboard, webcam, headset all work. Now on windows 7 64-bit devices and printers, the printer is actually shown and active. I even printed the windows program help and it prints that I need to fine.

  In Device Manager in the USB printer section he calls here HP Photosmart 3100 is active and has no problem at all.

  This is why I can only conclude this is the stupid software refused to install because it can not detect my USB drivers even if my USBs are working very well and I can even print the printer to start! My new motherboard is an Asus Maximum hero 8 with all the latest drivers to installed

  Thanks for all the suggestions that I really need to use the printer to scan using the HP software

  

  Hello

  (1) run the executable (i.e. AIO_CDA_NonNet_Full_Win_WW_130_140.exe) HP installation package
  2) open Windows Explorer and type % temp % in the address bar, and then press ENTER.

  3) navigate to the extracted installation folder, it will start by 7z (e.g. 7z1234S)
  Note: If there are several of these files to find the most recent sort by "Date Modified".
  4) go to the "Setup" subdirectory in this 7z folder.
  (5) move, delete or rename the usbready.exe file which is the Intel USB System Check utility.
  6) navigate the directory tree in the 7z folder and double-click the installation executable (Setup.exe)

  You can see any difference now?

• Windows Installer error wont let me install the hp printing software

  She keeps herself uninstall just after that an error message appears that says: "fatal error during installation, windows Installer Service is not to be accessible. This can occur if Windows Installer is not installed properly. Contact your support team. "However, I am able to install any other program.

  HP people have tried to help, but they say it's a Windows problem. How can I fix it?

  Thank you

  Von

  Hi, Vonique,
   
  Try these steps and check the result.
  Step 1: Disable all non-Microsoft programs and try to install the printer.
  1. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  3. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  4. click OK and then click on restart.
   
  Step 2: Once the computer is restarted, try the following steps.
  1. right click on the file to install printer software, click Run as administrator.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2 follow the instructions in the wizard to install the software.
   
  Step 3: Once the printer is installed, start the computer in normal mode.
  1. click on start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. on the general tab, click the Normal startup option, and then click OK.
  3. When you are prompted to restart the computer, click on restart.
   
  For more information, see http://support.microsoft.com/kb/929135
   
  For further assistance, contact the manufacturer of the printer.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Windows Installer error - "there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected.

  When trying to install a new control software and data package my Hyperion charger I get this error message "there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your supplier of staff or the package of support ".

  ---------------------

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• HP Photosmart 5500 series main: installation procedure for the printer software

  In my attempts to install the software of series of Prniner of 45510e-all-in-one Photosmart hp, I think that the process does not complete the installation of the software. After I clicked on that I accept the terms of the agreement, that he turns back to the ilnstall screen and a few seconds, it indicates the installation is complete. I don't think that the process is quick. It seems that there may be interrupted the process.

  In support of this contention, the printing software HP and doctor Scan shows the software seems incomplete and that there are problems of dirver.

  Can someone provide explanations that the question of the installation is deficient in this case, or that he really install this fast?

  Arthur

  The initial installation software for the HP Photsmart 5510 series was the correct software.  I finally resorted to re - install Windows 10. I was then able to uninstall properly the remains of the 5510 installs my computer which allowed somehow not all subsequent installations trying to finish. Unfortunately, the software would not overwrite the wrong files and it does not alert me to the fact that it was not complete installation.  It simply says that the installation is complete.  My guess is the ultimate failure of the procedure was the result of some entries in the REGISTRY, creating a conflict with the installation and full installation process was abandoned.

  The process automated to re - install then took place without a hitch and all the functions of the printer now appear to work as expected.

  I think that an option in the installation process to allow overwrite existing software on the computer may well have solved this problem without pain. The alternative that I had to go through has been extremely laborious and frustrating.

  ArthurmB

• After the installation of Vista update, receive the error code 21 with printer software

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas

  Download update for 32-bit Vista because brother MFC3220C box to restart the printer says cannot start error box App Installer says error code ['C:\USA\Install\3220C\Inst32.exe'] 21. I added Vista Ultimate 32 bit. I went to the brother site and talked to technicians and as usual runaround says I need to update with the new printer (Yes, well, well, if I do it will of course not brother!)

  * original title - printing with printer Brother MFC3220C problem. When I install the update to run 32-bit Vista; I get to the part of the installation where I plug the USB cable and the printer software will block upward. I get a code on the reboot error code ['C:\USA\Install\3220C\Inst32.exe'] 21 *.

  John Walker

  You must get your drivers for your Brother printer if possible from the manufacturer.

  Anything here useful?

  http://welcome.solutions.brother.com/BSC/public/as/au/en/DLF/download_index.html?reg=as&c=au&lang=en&prod=mfc3220c_as&dlid=&flang=English&OS=74&type2=-1

  There is also a uninstall tool mentioned that you can use to reinstall through Windows plug-and-play.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• iTunes update errors with the following message appears: there is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected.

  iTunes error update

  I am trying to install an update to iTunes on my laptop and find the folowing part-way through the installation error:

  "There is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected. Contact your provider to support personal or package. »

  I got iTunes for 3-4 years now and have always been able to install updates successfully, so don't not sure what is the problem.

  I tried msconfig and changed the boot process, so it includes all of the non-Windows elements, as suggested on the Microsoft Web site, but that has not worked.

  Can anyone help?

  Thank you

  The instructions were to contact the vendor of the package. This isn't iTunes, Microsoft.

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Cannot enable the firewall service in Windows Vista. Prevents the installation of the HP printer software.

  I'm trying to install the HP printing software, but the error message that the firewall must be enabled. However, I'm unable to turn on the firewall. The sytem keeps taking me in circels telling me I can '; t activate the firewall because the service is disabled.

  Anyone have this experience? Suggestions to solve? Thank you!!

  PS: I use VISTA w/SP2
  

  Hello

  How to turn on the firewall enabled or disabled in Vista Windows
  http://www.Vistax64.com/tutorials/92697-Windows-Firewall-off.html

  Check dependencies and their dependencies here:

  http://www.blackviper.com/WinVista/services/Windows_Firewall.htm

  For Services

  Start - type in the search box-> find Services at top - right click - RUN AS ADMIN

  (Means that you can right-click on the command prompt and RUN AS ADMIN).

  ---------------------------------------------------------

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
  who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
  strange questions.)

  Check the default services and dependencies to ensure that they are running.
  http://www.blackviper.com/WinVista/services/Security_Center.htm

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  =====================================

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• installation of the printer software

  Windows vista ultimate os. tried to install the HP 8500-printing software... allowed printing but would never accept the scan software (for scan to email documents or simply make a copy right or fax)

  Hi aprilworthington,

  To get the drivers you need, you can visit the HP website, which I believe is here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&lang=en&product=3752459&

  If it's not the right model for you, please do a search on the HP site for the correct model download your latest drivers scanner.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• We get 0 x 00000704 error. "The specified port is unknown" during the installation of the printer software.

  Original title: error 0x800f0243

  I tried to install the software for my 9130cw mfc via a wireless connection and I got this error, followed by an error of 0 x 00000704.  "The specified port is unknown."

  Ive had no problem installing the rest of the printer on my other laptop... but now its giving me a problem on these new.  Any help is welcome

  Hello

  Please write to us.

  The question you are faced to could be due to incorrect settings of the printer.

  To better understand the issue, I want to know:

  1. What is the brand and model of your computer?
  2. Have you installed the printer software on the other computer via the wireless connection/USB port?

  Please, try the following steps and check if that helps.

  1. Press the Windows key + R key, type control, and then click Ok.
  2. In all the elements of the Control Panel, click on devices and printers.
  3. Then double click on Add a printer , and then choose Add a network, wireless or Brother MFC 9130cw printer.

  Feel free to write us again if you have other queries, comments or suggestions using your Windows.