C7280: Transparency C7671B adapter

Similar Questions

• Digitization of slides of medium format on a C7180

  Hello

  Is there a way I can scan slides of medium format on my c7180?  I have a number of 6 x 9 cm slides which I inherited from my father.  Some are mounted in cardboard, some are dismantled.

  Usually, I scan of my Dell laptop running Vista or XP Dell desktop.

  Thank you

  Hello

  Unfortunately you can not, you need a scanner that has a TMA (Transparent media adapter) and your printer isn't suppurt / this.

  Kind regards.

• where can I get the frames model C7671B transparency adapter

  Could someone send me the steps so I can do a set of images of model for my C7671B transparency adapter?

  I have them off e - bay... Thank you!

• FireFox has gone completely transparent and nothing works

  I was in the middle of surfing when suddenly, Firefox went completely transparent and there is nothing I could do. Only minimize, restore and close works.

  I tried to update flash, re-installing of Firefox and nothing works.

  http://ImageShack.us/a/img5/8683/75930925.jpg
  http://ImageShack.us/a/img18/1740/89238227.jpg

  Hello yAxOr, can you try to start firefox in safe mode by pressing the SHIFT key during startup of this and see if the problem occurs there too? Maybe a theme or hardware acceleration intrudes here...

  If safe mode does not work, you can try to disable hardware acceleration in firefox > options > advanced > general and or disable addons that could cause the problem. It would also be interesting what graphics hardware (description of the adapter, driver date and version of the driver) you use - you can access this information in firefox > help > correct information to the bottom of this page... Thank you

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• charging c7280

  I had a C7280 for several years. In general, it works pretty well, although I sometimes have to power off and back up before it will print. It is used very slightly; We have probably not to print 10 pages per week, but quite often it seems to run out of ink and then there is the warning of expiry. I consider long recharge it the ink carts, but Dale away from this due to the warnings of the printer. However, I decided to bite the bullet and give to fill again a try. To this end, I bought on eBay a set of wagons (transparent plastic) empty and a supply of ink. Everything was listed as compatible with the C7280.

  In preparation for the filling, I begain to read and watch videos, and I'm having doubts and wants to talk with knowledgeable people.

  I learned about two main issues: (1) If you release the empty ink tank you will suck air in the system and the printer is unusable and (2) some inks may simply not work because they are not properly forumulated.

  Given the limited that use us it, is probably not economic justification to do this, but I already bought the materials and the cost of the new trolleys is all just annoying.

  Question:

  1. I have really need color. What should I do to just use it in B & W, but retain the possibility of return to the color? Most of the costs of the trolleys is the color, so I don't buy them?

  I was going to ask more questions on filling, but as I thought about it in writing, I decided you bother not with fill, I'd like to just an answer to the question above.

  Thank you.

  Hi AtomRG,

  Welcome to the HP Forums!

  I understand that you wonder about the filling of cartridges and just using the B & W printer. I'm happy to help you!

  Please see the following guides:

  • Can I recharge the ink in my HP ink cartridge?
  • Using ink in inkjet printers.

  This printer has color cartridges so that the print heads don't not to be damaged. You can still use only black and white only, if you like, but the printer will always use part color to get a sharper black.

  If you want to know how to put the printer in just black and white printing, please answer with the operating system that you are using. If you do not know the operating system you are using, please visit this site. Whatsmyos.

  Hope this helps, and hope to hear from you soon!

• ASA 5505 Firewall Transparent with a Server Web Question

  I need to replace my Sonicwall firewall and I got an ASA 5505. However, I need to have a transparent firewall, no Natting and Server Web will have a public IP with relevant ports remains open.

  The simple illustration is the Internet---> firewall Transparent - Web Server (With public IP Address)

  1. There should be no natting

  2. the web server must have a public IP address and be accessible from the internet.

  3 ports can be blocked or re-opened.

  Please let me know if its possible to conclude this agreement.

  If so, can I get a command line sequence that allows this work.

  My version is

  Cisco Adaptive Security Appliance Software Version 4,0000 5

  Version 6.4 Device Manager (9)

  Thanks in advance

  Post edited by: Don Charles

  It is a minimum configuration for your needs (runs on ASA 5520).

  !
  transparent firewall
  !
  interface GigabitEthernet0
  Description - the Internet-
  nameif outside
  Bridge-Group 1
  security-level 0
  !
  !
  interface GigabitEthernet3
  Description - connected to the LAN-
  nameif inside
  Bridge-Group 1
  security-level 100
  !
  !

  interface BVI1

  Description - for management only-
  IP 10.1.10.1 255.255.255.0
  !

  !
  network of the WWW-SERVER-OBJ object
  Description - webserver-
  host 123.123.123.123

  !
  !
  WWW-SERVER-SERVICES-TCP-OBJ tcp service object-group
  Description - Serices published on the WEB server-
  port-object eq www
  EQ object of the https port
  !
  !
  OUTSIDE-IN-ACL scopes permitted tcp access list any object WWW-SERVER-OBJ object-group WWW-SERVER-SERVICES-TCP-OBJ
  !
  !
  Access-group OUTSIDE-IN-ACL in interface outside
  !

  Samuel Petrescu

• ASA 5505 transparent mode dosnt pass traffic

  Hi all

  need help

  ASA 5505 do not pass traffic as a cordon of brewing, how do you get traffic?

  ciscoasa # sh ver

  Cisco Adaptive Security Appliance Version 8.2 software (5)

  Version 6.4 Device Manager (5)

  Updated Saturday, May 20, 11 16:00 by manufacturers

  System image file is "disk0: / asa825 - k8.bin.

  The configuration file to the startup was "startup-config '.

  ciscoasa until 55 minutes 31 seconds

  Material: ASA5505, 512 MB RAM, 500 MHz Geode Processor

  Internal ATA Compact Flash, 128 MB

  BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB

  Hardware encryption device: Cisco ASA-5505 Accelerator Board (revision 0 x 0)

  Start firmware: CN1000-MC-BOOT - 2.00

  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03

  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.05

  0: Int: internal-Data0/0: the address is e4d3.f193.9486, irq 11

  1: Ext: Ethernet0/0: the address is e4d3.f193.947e, irq 255

  2: Ext: Ethernet0/1: the address is e4d3.f193.947f, irq 255

  3: Ext: Ethernet0/2: the address is e4d3.f193.9480, irq 255

  4: Ext: Ethernet0/3: the address is e4d3.f193.9481, irq 255

  5: Ext: Ethernet0/4: the address is e4d3.f193.9482, irq 255

  6: Ext: Ethernet0/5: the address is e4d3.f193.9483, irq 255

  7: Ext: Ethernet0/6: the address is e4d3.f193.9484, irq 255

  8: Ext: Ethernet0/7: the address is e4d3.f193.9485, irq 255

  9: Int: internal-Data0/1: the address is 0000.0003.0002, irq 255

  10: Int: not used: irq 255

  11: Int: not used: irq 255

  The devices allowed for this platform:

  The maximum physical Interfaces: 8

  VLAN: 3, restricted DMZ

  Internal guests: 10

  Failover: disabled

  VPN - A: enabled

  VPN-3DES-AES: enabled

  SSL VPN peers: 2

  The VPN peers total: 10

  Double ISP: disabled

  Junction ports VLAN: 0

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect Cisco VPN phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes a basic license.

  Registry configuration is 0x1

  Modified configuration of enable_15 to 20:34:47.689 UTC Wednesday 5 December 2012

  ciscoasa #.

  ciscoasa #.

  ciscoasa # sh run

  : Saved

  :

  ASA Version 8.2 (5)

  !

  transparent firewall

  ciscoasa hostname

  activate 8eeGnt0NEFObbH6U encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  I haventerface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  Shutdown

  !

  interface Ethernet0/3

  Shutdown

  !

  interface Ethernet0/4

  Shutdown

  !

  interface Ethernet0/5

  Shutdown

  !

  interface Ethernet0/6

  Shutdown

  !

  interface Ethernet0/7

  Shutdown

  !

  interface Vlan1

  nameif inside

  security-level 100

  !

  interface Vlan2

  nameif outside

  security-level 0

  !

  passive FTP mode

  outs_in of access allowed any ip an extended list

  outs_in list extended access permit icmp any one

  pager lines 24

  Within 1500 MTU

  Outside 1500 MTU

  no ip address

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  outs_in access to the interface inside group

  Access-group outs_in in interface outside

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:234e9b9c6c9c941a89e37011325b6d5e

  : end

  ciscoasa #.

  ciscoasa #.

  ciscoasa #.

  ciscoasa # sh - access list

  access cached list the ACL log stream: total 0, 0 (deny-flow-max 4096) denied

  alert interval 300

  outs_in list of access; 2 elements; hash name: 0xd6c65ba5

  permit for access list 1 outs_in line ip scope any a (hitcnt = 0) 0x7d210842

  allowed to Access-list outs_in line 2 extended icmp any a (hitcnt = 0) 0x5532fcc5

  ciscoasa #.

  Hello

  Exactly... Good to know it works now.

  Do you know why he needs the IP address (such as a transparent firewall)?

  The ASA will act as a transparent layer 2 on the right device to the network, but what happens when the ASA does not have a particular destination mac address... What would be the source ip address of the package? Ip address of the ASA. So that's the main reason why we need that.

  We use it also for traffic management and for AAA services (if authentication is used the ASA will send the AAA authentication request to the server) with the IP address of this source.

  Please check the question as answered, so future users can pull of this

  Julio Carvajal

  Costa Rica

• Transparent gateway for MSSQL

  Dear all!
  
  Could you please look at my problem:
  
  I have a transparent gateway installed on the MSSQL Server so listener.org is configured it. But I can't reload lsnrctl service because it returns me an error:
  
  AMT-12541 no listener
  TNS - 12560 TNS Protocol adapter error
  
  This means that the MSSQL Server also Oracle server is to be installed, not just a transparent gateway?
  
  Thanks in advance

  Using software of transition from 32-bit to 64-bit Windows is not supported.

  Published by: kgronau on May 8, 2012 09:34

  The first gateway of 64-bit software is 11.2 and this software 11.2 64 bit is certified for 64-bit Windows.

• Transparency issues: Tiff object on another object of Tiff

  I have a CMYK tiff file a layer created in Photoshop, which is white letters on a transparent background (I created it from an indesign text that I framed rasterized in order to adapt the work of the police. The program shows this as a "(vecteur Smart objet CMJN/16)."

  When I place the file in my indesign on project blue photography (as TIFF, with various shades of blue), everything looks perfect on screen.

  When I use the export feature to create the PDF file, looks good on the screen.

  When I print, the watch box, distorting the blue image behind it.

  I'm not so much worried for my printer (HP Photosmart Plus), but I am concerned about sending my PDF files on a professional printer and having transparency problems. I read the other entries of the transparency forum, but none of the proposed solution works. Any suggestions?

  Try to hit only 16 bits to 8 bits.

  And read this:

  http://InDesignSecrets.com/eliminating-YDB-yucky-discolored-box-syndrome.php

  Bob

• SEMI TRANSPARENT GLASS EFFECT BUTTON

  Hello

  I'm looking for any reflection on the contribution of a glass effect button semi transparent please.

  I've been playing with this for awhile in FW and still not get the look I'm after.

  I'm designing an arty site that has a lot of gray with large images. Rather than use words to nav around the site, that I want to use images, nothing new there and loads of time however did that on this site I would use a button transparent semi which is clear'ish and then changes color slightly when you click it.  I can make the mouseover in flash so that isn't the problem. I am not fan of buttons.

  In short;

  Someone has fun ideas for a glass button semi transparent which could be used to nav around a site?

  I also need to "tone" it with a color when mouse over.

  Thanks much for any help.

  I jumped 'Fireworks tutorial"in Google, because I know that Smashing Magazine has a nice overview (http://www.smashingmagazine.com/2009/07/27/tutorials-and-resources-for-adobe-fireworks/).

  You could read on these four tutorials and see if any of them have techniques you could use or adapt:

  http://Abduzeedo.com/James-white-o-series-Fireworks

  http://blog.blue2x.com/?p=61

  http://www.voidix.com/fireworks_gel_button.html

  http://qrayg.com/learn/Fireworks/jewelbutton/

• Need help to find an adapter for a third-party monitor

  Hi all! I find myself in need of a little guidance, and I hope that someone out there will have a quick n easy for me...

  I have a Mid-2011 27 'iMac. which has two ports Thunderbolt It is taken with a Wacom tablet that I use constantly, and the other is made by an external hard drive to a solid state, which has a built-in cable to Thunderbolt (no way to hang it on a different port). I also have a 27 "HP monitor that is currently connected via an HDMI USB adapter.

  The problem is that the HP monitor is actual "jiggy" - the USB does not seem fast enough to deal with requests for the monitor. It is almost unusable. I know I should run it via a HDMI adapter Thunderbolt, but as I have already mentioned the two my Thunderbolt ports are already in use.

  Someone at - it ideas? I need sort of three to two ports Thunderbolt hooks, but I can't seem to find anything for less than $300 that would work. (I am illiterate when it comes to the different cables, adapters, ports, etc., so I hope someone can point me in the right direction by using short words... Most of the products that I travel through list specifications that me Chicane).

  The monitor has two HDMIs and a VGA port, and my iMac has a Firewire 800 port, if that helps at all...

  2011 iMac have only 1 Thunderbolt port and there is no such thing as a Mid-2011, you must have an iMac of year later, if it has 2 ports Thunderbolt. All the 27 "iMacs, from 2012 to 2015 the current have 2 ports Thunderbolt.

• Overview unwantedly convert a color to transparent (!)

  Hello

  I use a snippet to open png files and save them to gif format (to reduce the size of the file).

  The files are a book cover, including an orange background, with red, white and dark gray text and graphics (curves).

  Yesterday, it worked well.

  Today when I save as gif red color in the image disappears. I guess that it is transformed into Transparent. I see where the red text and graphic lines were is the background orange.

  Preview was not doing this yesterday.

  Today it is the same on the png files that I created yesterday, so I'm sure that change is in the preview, not Inkscape (which I used to create the PNG).

  I do not use the lasso or other tool to select all areas of the picture and enable transparency.

  I open the image, choose the export file to gif format and with the box checked and checked alpha, the color red is disappearing and I don't want it.

  Any suggestions much appreciated.

  Overview 8.1 (877.7)

  10.11.6 OSX

  Thank you.

  Do not use the gif. It is an older format, limited to 256 colors. It is quite insufficient for most uses (with the exception perhaps of dubious of these short "animations").

  One of the unique features of gif should have 'transparency' - but which has been achieved by stipulating a particular table as color being transparent (and not, as in modern formats, by adding a fourth channel, called "alpha channel" to the series of red, green and blue).

  Somehow the red in your translation got to be designated 'transparent color '.

  If you want to reduce the size of the file, try saving to jpeg and quality change to achieve a good balance between size and quality.

• Mac book pro charger adapter

  I have a Macbookpro bought in May 2010 and need a new charger adapter. I need to know what adapter I need. I tried to read the table, but it was only in 2012. If someone knows that it would be useful to feet!

  Find the right adapter cord for your Mac laptop and sector

  https://support.Apple.com/en-us/HT201700

  

• Cable/adapter for use of 2007 iMac as a display for 2009 MacBook Pro

  I would use my older iMac as a monitor for my MacBook Pro. Want to know which cable and/or adapter I need help.

  The iMac is a 24 inch, Intel based since 2007 (6.1). 2 GB, 667 MHZ.  It uses iOS 10.5.8. Its port is a Mini-DVI video output.

  The MacBook Pro is a 15-inch (5.4) 2009. 4 GB, 1067 MHZ. It uses iOS 10.11.6. Its port is a Mini display port.

  Popular Wizard. Thank you.

  You must use a wireless or Ethernet connection and configure Virtual Network Computing. A 2007 iMac only supports video-, and cannot function without the standard display cable.

  (145067)

• I get no picture on the TV when using mini ipad with the Digital AV adapter.

  I get a white on my TV screen when I connect my mini ipad digital AV adapter except HDMI 1 showing in the upper left corner of the TV screen. My mini2 ipad works great with the same son and TV.  I tried two ipads with different TV but get the same result. The ipad mini works OK if not connected to the TV. Two minis are working on the same operating system setting.

  The Digital AV adapter can be finnicky.

  Have you tried simply unplug and plug the adapter with the HDMI cable connected with it?

  With the adapter always plugged into your iPad, have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to the dark and restarts with the Apple logo, then release them buttons?

  Good luck!