C8180 printer: drivers Mac 10.10 for c8180

Similar Questions

• You can use windows print drivers on Vista 7 for printers

  Original title: print Vista and Windows 7 drivers

  You can use windows print drivers on Vista 7 for printers that do not have support for Vista?

  Hello

  It would be useful that you started with the make and model of printer.

  Usually it's the other way around - use drivers Windows Vista on Windows 7 unit.  Windows is supported in this regard.

  Have you already installed the printer on Windows Vista?

• SOLUTION: Get Win 7 printer drivers/HP Solution Center for work on Windows 8

  Took me some time to understand it, but I managed to do the work.

  First of all, the preliminaries:

  I have a laptop HP dv9700t running the 64-bit version of Windows 8 Pro RTM (not the preview, but I guess it will work as well on the preview).  My printer is a HP Photosmart C7280.  If you have a different printer, it is possible that something similar to how I solved my problem will help you, especially by running your installation in Windows 7 Compatibility Mode files.

  Windows 8 is provided with printer C7280 stock drivers that work by going to control panel > printers and devices > add a printer, but there is only limited to those features.  As such, I wanted to run the HP Setup files have increased functionality.

  Unfortunately, when I run the full installer of HP for my printer, there was no button 'Install a printer', or one of the other usual buttons.  There was only one button "quit".

  Here's how to let him run and install correctly.

  Right click on the HP full installation file, then properties > compatibility > then check the box "run this program in compatibility mode for:", select "Windows 7" in the drop-down list box, then click on 'OK'.

  Run the installation file as you would normally in Windows 7.

  I tried this two ways... first when you're connected via a USB cable.  It works perfectly without error.

  I also tried with the printer connected to the network via WiFi.  A few problems.

  The installation program detects my printer very well, and I clicked 'Next' or 'OK' or whatever the prompt was to install the printer.  The installation would hang 'Response of SNMP' (or something similar) and it would list the IP address of my printer.  I waited, waited, waited for an hour, and it would not go beyond that.  Not to worry.

  Proceed with the normal installation until you get the message 'Response of SNMP' and the installation fails.

  Enter with CTRL-ALT-DEL Task Manager.  You will see an entry in the 'Apps' to the installer of HP... DROP.

  Below the "Apps" list, you will see the list of "background processes".  In this list is something along the lines of "HP Network Interface user", or something similar, consuming a significant amount of CPU.  Highlight this entry and click "End task" downstairs.

  The "SNMP" window closes and your installer will end then normally and your printer/fax/scanner will be installed correctly.  HP Solution Center works normally, like printing, scanning, etc.

  The next person who uses that will give a few comments and also answer a few questions for me so I can update this post with more specific information?

  Please let me know what is the exact "SNMP" message when the installation is blocked.  Please let me also know that the exact name of the background process "HP Network User Interface" is, and the name of app Installation HP.

  I hope this will help you.

  Glad to hear that a form any of my solution works for others.

• Mac osx 10.9.1 printer drivers

  I just ordered an Officejet 7610, (I'm waiting for the delivery). I'm in MAC OSX Mavericks, OSX10.9.1. Installation is not driver support. Does that mean that it won't work?

  Thanks for the quick and helpful response. I downloaded new printer drivers and my new hp. printer works perfectly. Fortunately there are helpful people like you here to troubleshoot.

• How can I find Canon CP910 printer drivers for use with OS10.11.3?

  How can I find Canon CP910 printer drivers for use with OS10.11.3?

  Download the player package Cannon from Apple or get your driver from the Canon support site.

  V3.3 Canon for OS X printer drivers

  Canon Laser Printer Drivers for OS 3.1 X

• Need print drivers for an OfficeJet 7610 for R2 in Windows 2008 Server

  I need print drivers for an OfficeJet 7610 for R2 in Windows 2008 Server.  The pilot to feel that you get when download you from hp.com are for XP and Vista Window7.  The error message says I have to update my Windows 2008 Server R2 to XP, Windows7 and Vista to install drivers.  I called HP and have a case number.  All I want is a link to the REAL Windows 2008 Server R2 Enterprise OfficeJet 7610 Print Drviers in x 86 and x 64 bit versions.  Is there someone who can help?

  Hi Print_Madman! : you might have more luck going Buisiness & reierate Forum this question out there

  He is the owner of the House section

  Good luck

  hope this helps you

  spacechild

• Printer drivers for Windows 7 64 Bit.

  Recently installed Windows 7 64 bit on my new i7 computer.    Incredibly FAST.   I use the Autodesk REVIT 3D construction modeling program.   Make a model of quality higher on my old core 2 duo would take almost an hour.   With the 64 bit on i7 with 3 GB of ram and graphics card same OS, same rendering would take a little more than 1 minute!
  PROBLEM!   Cannot find 64-bit print drivers for 2 of my 3 Canon printers.   OK driver for Canon ix5000 A3 printer but no driver for Canon i865 my old BJC 5500 A2 or A4 printer bubble jet printer which is essential for my work.    Have you checked of course Canon Web site, but could not find what I need and Canon does not seem to help.   Might be there somewhere but couldn't find it.   Without printer drivers, the 64-bit system is useless.
  Surprisingly ALL OTHER WORKS on the 64 bit OS.   Even some older applications of v.   I expected instead that the drivers etc would be no problem since we are told that the world is about to go soon 64 bit.
  Someone there had business or relationship problems with the printer drivers for 64-bit Windows?   Any help appreciated coz I'd go 64-bit.

  Computer details:
  Core i7 920 CPU on the motherboard Gigabyte GA EX58 UD4P.   3 x 1 GB Corsair xms RAM 1600.   1 TB Seagate Barracuda SATA HDD.   With the help of old graphic card Asus EN8600GTS.
  Case Antec Solo.   With the help of an old power supply 450w awaiting the arrival of Antec Truepower PSU (No. Gaming) 550W.   Bought the new copy of XP Home but Windows 7 is currently experimenting and will certainly upgrade to Windows 7 when it was released.

  You can try using the Vista drivers. If they do not (or do not exist), your only recourse is to get hold of the gun and see if they have plans to write drivers for these printers (or to replace the printer or the operating system). The mftr material. wrote drivers for their devices. The mftr material. is the * only * person who will do that, not the creator of the operating system that you use (Windows). All hardware drivers that come with Vista and Win7 were written by mftrs of various materials. and provided to Microsoft for inclusion. If the material mftr. no no intend to write new drivers for a specific device, then it's the end of this story. MS - MVP - Elephant Boy computers - don't panic!

• Need to know where in the system folder of Windows Vista, I can access the printer for a shared printer drivers .inf files

  I have a printer that is attached to my system down Dell Windows XP, I want to access the floor running Windows Vista from my Sony system.  I managed networked the printer so I can see it in my Sony Windows Vista network folder.  However, when I try to access it, it gives me the following error msg:

  The server to the printer 'HP Photosmart 1215 series' doesn't have the installed printer driver.  If you want to find the right driver, click OK

  Otherwise, click Cancel and contact your network administrator or the original equipment for the printer driver manuafacturer.

  I advanced and clicked on "OK". and the system brings up a box for me to find the correct INF file to load.  I went ahead and tried the DRIVERS/WINDOWS/INF and a few other places, but has failed to find (any) of printer drivers

  Can someone tell me where I can get these?

  Download the appropriate driver from the printer manufacturer's web site.  If it contains a Setup program, run the program and when it asks you to specify the printer installation, create a local printer whose name is \\xpsystem\printer where 'xpsystem' is the charing system printer and "printer" is the name of the share.  This should create the printer.

  You can also expand the downloaded driver and try to add the printer as you did before, direct the installation to the folder containing the driver that you downloaded.

  Brian Tillman [MVP-Outlook]

• Printer want is more scanning for Mac Os10.8.5

  Hello

  printer is printing wireless, but when I try to scan to portable computer or email it says printer not connected, but clearly because it it prints. It worked before but had recenty reconfigure wireless set up but, as it prints. I guess it's okay.

  Suggestions to please as it is originally a real problem for me.

  Thank you

  Thank you. I ended up talking to HP support on the phone. There was a problem with the old printer drivers on my laptop etc.

• Printer drivers HP LaserJet M1005 MFP not supported for Windows 8

  Dear support,

  I use the printer HP LaserJet M1005 MFP range, but the drivers are not supported for Windows 8.

  Pls can update you with the new drivers of windows 8, which his slove my problem.

  Thanks in advance

  Concerning

  Vermorel

  Hi Majusko,

  If the Windows 7 installs on 8 to win, you must wait for the pilot to Win 8 to be released. Basic/Host-based driver available February 2013

  HP LaserJet and Color LaserJet - Windows 8 media

  HP trade-in program

• Portable 15-ab100na Pavilion: Photsmart 2570 all-in-one series printer drivers download for Windows 10

  I have a perfectly usable HP2570 printer and just bought a new HP laptop after the failure of the trusty old Dell.

  Tried to get the HP Support Web site printer drivers but that tells me that the printer is no longer supported.

  I see 'Professor' has helped to solve a similar problem for someone with this printer running Windows 7. Y at - it something or it, I use / operate my printer on Windows 10 on my new laptop Pavilion?

  Thanks to readers who can help you.

  John F40

  Hello

  I'm glad to hear that your problem is solved and everything works fine now.

  Thanks for bearing with us also!

  Good day!

• Printing from MAC for Deskjet 3050 ALL in one J611n - printer "Not connected" error message

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

  I see that I had 20 veiws and no answer!

  I am new to Mac and not very techno, however I seem to have solved this problem myself.

  I think that after turning to 'Maverick' on my Mac OS Lion, duplicate the printer as 2 showed in 'utility '.

  "I basically deleted that was not'online ' or 'connected '.

  Problem solved!

  Tracy UK

  TracyUK wrote:

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

• Printer drivers for Windows 7

  I got a new laptop with Windows 7 above. I have a printer Canon BJC-85. Yes it's old. I need the printer drivers for Windows 7. I connected the printer to the laptop but nothing happens.

  Canon BJC-85 drivers & downloads page has only drivers for Windows XP and earlier versions.  It is probably not possible to use the printer with Windows 7 (or Windows Vista).   :-(

• Help with printer drivers for Minolta Magicolor 2300W for Windows 7

  HI - anyone has any idea how I can find/get the printer drivers for my Magicolor 2300W for the new Windows 7 OS?  I have 2 of these printers and you can't just throw away... Thank you

  http://onyxftp.mykonicaminolta.com/download/searchresults.aspx?ProductID=992

  There is no drivers for Windows 7. You could try the Vista ones. If not contact Minolta and see if they plan on making available to them, if there is a workaround solution, etc.. Unfortunately, without a driver, you cannot use the printers. MS - MVP - Elephant Boy computers - don't panic!

• Lexmark X 6100 printer drivers for the NEW Windows 8

  I have upgraded to Windows 8 and boy that I came across several problems...  The only problem I have most pressing difficulty is my multifunction printer/scanner/fax X Lexmark 6100 series. I have no driver for it.  Lexmark said Microsoft should have one for her, but Microsoft 8 can't find it.  Any suggestions?

  The latest Lexmark driver released for the X 6100 series is for Windows Vista.  It looks like the same old story - the manufacturer of the printer refuses to update its drivers so that they can go wrong in buying a new printer.

  For the same reason, "Universal printer drivers" Lexmark do not work for these no more.