CA and certificate.

Similar Questions

• HP20002D19WM came with no software (cyberlink) key and certificates of authenticity for windows

  I just bought the HP20002D19WM, which came with no software (cyberlink) key and certificates of authenticity for windows. I can't use any program cyberlink with a key number to enter. Also if I would give for somereason I wonder in my number of windows I would not be able to since I have ever trevieved it

  This is the original factory specifications for your laptop HP 2000-2d19WM. All Cyberlink OEM software should work without key, because it is not mandatory for the installed OEM mass products. Regarding the Windows product key, see Activation of Windows 8 product;

  • OEM Activation 3.0 (OA3) at the factory. A digital product key (DPK) is encrypted and installed on the motherboard BIOS during the manufacturing process. Windows 8 will be ignited automatically the first time that the computer is connected to the Internet. With systems activated by OA3, most of the computer's hardware can be replaced without the need to reactivate the software from Microsoft.

• ASA (v9.1) VPN from Site to Site with IKEv2 and certificates CEP/NDE MS

  Hi all

  I am currently a problem with VPN Site to Site with IKEv2 and certifiactes as an authentication method.

  Here is the configuration:

  We have three locations with an any to any layer 2 connection. I created each ASA (ASA5510 worm 9.1) to establish one VPN of Site connection to the other for the other two places. Setting this up with pre shared keys and certificates that are signed by the CA MS administrator manually work correctly.

  But when we try to enroll these certificates through the Protocol, CEP/NDE his does not work.

  Here are my steps:

  1 configure the CA Turstpoint to apply to the certification authority

  2. request that the CA through the SCEP protocol works fine

  3. set up a Trustpoint and a pair of keys for the S2S - VPN connection

  4. registration form identity certificate CA via the SCEP Protocol with a one time password works fine

  5. set the trustpoint created as for the S2S - VPN IKEv2 authentication method.

  Now I did it also for the other site of the VPN Tunnel. But when I ping on a host that is on a different location to make appear the Tunnel VPN - the VPN session is not established. In the debugs I see that there are a few problems during authentication of the remote peer.

  On the MS that I see that the certifactes of identity for both ASAs are communicated and not revoked or pending state. The certificate based on the model of the "IPSec (Offline).

  When the CA-Admin and a certificate me manually based on a copy of the model of "Domaincontroller" connection is successfully established.

  So I would like to know which is the correct certificate for IP-Sec peers template to use for the Protocol, CEP and MS Enterprise CA (its server 2008R2 of Microsoft Enterprise)?

  Anyone done this before?

  ASA requires that the local and Remote certificate contains EKU IP Security Tunnel Endpoint (1.3.6.1.5.5.7.3.6) (aka IP Security Tunnel termination). You can create a Microsoft CA model to add.

  If you absolutely must go with the 'bad' cert, there is a command

  ignore-ipsec-keyusage

  but it is obsolete and not recommended.

  Meanwhile at the IETF:

  RFC 4809

  3.1.6.3 extended Key use

  Extended Key Usage (EKU) indications are not required.  The presence
  or lack of an EKU MUST NOT cause an implementation to fail an IKE
  connection.
  

• Hello! I've got CS3 Design Standard - real records and certificate of software license. It was installed on my laptop that crashed and could not be uninstalled. I have now installed on my new MacBook Pro, but can't get it registered with the

  Hello! I've got CS3 Design Standard - real records and certificate of software license. It was installed on my laptop that crashed and could not be uninstalled. I have now installed it on my new MacBook Pro, but can't get it registered with the serial number. Is it because it has not been uninstalled on the previous laptop? What should I do now? THX!

  Maybe this can help someone else...  I had to simply properly uninstall CS3 and reinstall again after that.  I think what he sort!  I also remember having a similar problem with the Mac at work a couple of years back.  Not sure if it is the same for CS5/CS6.  Here is a link on how to properly uninstall CS3 on Windows XP, Windows Vista and Mac OS.  I'm on OS X 10.9.2 but it works beautifully.  Remove from Creative Suite 3 and CS3 products

• Provisions and certificates

  Hello

  I'm working on the preparation of a magazine to the newsstand to newspapers. I need to create the mobileprovisions and certificates for I can get into the designer of the Viewer. I have problems with that. I looked at several articles, and it seems that this must be done in Xcode. Is this true?

  Can someone tell me please in the right direction on this subject? I opened up Xcode and it seems complicated to me. I imagine that there is an easier way or I'm missing something.

  Any help is appreciated.

  Thank you

  Do not confuse yourself by following the Apple developer forums. X code does not enter the DPS workflow. If your application is a matter of Multi application, make sure that you publish as "Public and retail sales" of the same producer Folio id / 'Title id"that you entered in your DPS App Builder account.

  Now to test the application, you can add up to 100 UDID in your Provisioning portal and then re - download Mobile configuration files, use the new DPS APP Builder and then download the new developer.ipa on your ipad for testing. You should never apply to Apple without testing first.

• Two problems. New installation. (Question loading and certificate of the page).

  So, I have recently reinstalled FF, thinking I'd give it a try. And I immediately ran into two problems.

  The first of them being that facebook does not seem to work correctly at all. Attached image.
  The second is that I get a message of invalid certificate on Web sites, that I used most often. For example, I'll use the site Web of Halo Waypoint. Ran and owned by Microsoft/343 Industries. I do not get an option "Add expection" on these pages. Also attached image.

  Hi, in case, you're an avast user, please try to disable https scanning in avast:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• When I connect to secure Web sites (that is to say the National Bank aust) it says not a trusted site and certificate not valid?

  When I connect to secure Web sites (that is to say the National Bank aust) a message pops up saying not approved Web site and the security certificate is not valid? I can also book flights on qantas and Virgin site? Help, please. I could do all this 24 hours but now can not do something like this.

  Try to upgrade to a newer version of Firefox 3.6.x or 6.0.x.
  
  Your current version of Firefox 3.0.19 can exceeded SSL certificate expired.
  
  Also check the date and time of the clock on your computer: (double) click on the clock icon in the Windows taskbar.

  • Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

• Impossible to install iTunes on XP, gives the error about the signature and certificate

  I can't install itunes on my pc, it gives me an error about the signature & certificate. Its probably my settings but I have no idea how to change anything! Not computer savvy

  Check the time and date on your computer. This is probably the cause.

  http://support.Microsoft.com/kb/307938

• Cannot access the system files with permissions to access EFS and certificate are set correctly.

  I am running EFS on a secondary internal hard drive on my computer Vista Enterprise SP1.  I have been using EFS for a few months with no problems.  Recently, when you try to access a number of files, I started getting access denied errors.  I'm still under the same certificate with same file permissions that I was when I originally encrypted the files.  Curiously, I can move, delete and rename files without problem, but I can not access, copy, or decrypt.  I tried reseting the file permissions, nothing done.  An excerpt from the command line:

  D:\>ICACLS FILE name. MOV

  NAME OF FILE. MOV : (F)

  BUILTIN\Administrators: (I) (F)

  NT AUTHORITY\SYSTEM: (I) (F)

  NT AUTHORITY\Authenticated Users: (I) (M)

  Builtin\Users: (I) (RX)

  Processed 1 files successfully; Treatment failure 0 files

  D:\>cipher/y

  Thumbprint for computer certificates EFS ComputerName:

  D:\>cipher/c FILENAME. MOV

  List D:\

  New files added to this directory will not be encrypted.

  E FILE NAME. MOV

  Users who can decrypt:

  Thumbprint of the certificate:

  No recovery agent.

  Important information:

  Algorithm: AES

  Key length: 256

  Entropy key: 256

  D:\>cipher/d FILENAME. MOV

  Decryption of files in D:\

  NAME OF FILE. MOV [ERR]

  NAME OF FILE. MOV: Access denied.

  0 file (s) [or directorie (s)] in 1 directorie (s) have been deciphered.

  D:\ >

  The only thought I have is that maybe the metadata associated with the EFS file is damaged?  I'm open to any new idea to access my files.  Thank you in advance.

  Hi Dekaner,

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum Technet Windows Vista security permissions and. Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lost product key, have the backup disc and certificate of authenticity

  Is there a way that I can avoid having to land $200 for a new product key?

  Lost or misplaced product key (certificate of authenticity)
  http://support.Microsoft.com/kb/824433

  How to get a replacement product key?
  To replace a Microsoft product key, you must contact Customer Support and Microsoft. To locate the phone number, visit the following Microsoft Web site:
  http://support.Microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS

  For more information on this topic, visit http://support.microsoft.com/kb/811224 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Re: HTTPS and certificate trust

  Hello everyone. I read a lot of posts in this forum on the theme of the HTTPS and I think I understand the different ways to obtain certificates on a device to avoid the message "you are trying to open a secure connection, but the server certificate is not approved.".

  My question is whether it is possible for an application to trust all certificates via APIs, in order to avoid the certificate trust whole-problem?

  In Windows Mobile and iPhone OS, you can override the logic of acceptance of certificate in the API so that an application trusted all certificates. This is useful in cases where an application needs to connect only to a private server. Is it possible in sib to override the logic of certificate, or certificate statement stuff above, outside of the app? (More precisely, I'm just using a simple object of HttpConnection MDS etc..)

  Thank you!

  -Tom B.

  There is no API that allows you to trust a certificate.  This must be done by the user or the administrator of the BlackBerry Enterprise Server.

• ISE and certificates

  Hi all

  Im trying to get my head around the use of 3d party certificates with the ISE and I think that I need advice here.

  I have a setup of 6 knots ISE, 2xAdmin, 2xMonitoring and 2xPolicy.

  All the these have the abc.local domain name.

  I want to use MS-CHAPv2 and customer service without certificate error.

  So I register all my six knots with some 3d CA? Or only the nodes 2xPolicy?

  I know that the best solution would be the six, but just to know if it is possible.

  How to work around the problem with .local? I don't think that it is possible to get a certificate with .local as a domain in the FULL domain name.

  Is that useful here of SAN certificates? How would look (even .local in CN..?)

  Other things to consider in the present?

  concerning

  Mikael

  That's right, that you must issue the CSR based on the currently configured for ise host name that corresponds to the fqdn.

  Your problem is that the public certificate authorities will not issue you a cert because you use a .local and not a public domain such as .com, .edu or .org to name a few.

  The only way to solve your problem is to use a Microsoft private certification authority that is simple to configure. Or change your area om ise and use the public domain of your company name.

  Thank you

  Sent by Cisco Support technique iPad App

• Cluster VPN and Certificate Wildcard

  Hello

  I'm going to set up a VPN cluster with three boxes of ASA and I wonder if anyone has any experience using a certificate with wildcards with this type of installation.

  I'm done with the installation and everything works fine, but as shows my initial installation (and the doc I've read), the client connects first to:

  cluster.Domaine.com

  The captain, then returns the address or the domain name complete (I use fqdn) of the asa less busy in the cluster:

  vpn01.domain.com

  or

  vpn02.domain.com

  or

  vpn03.domain.com

  So I would need 4 certificates to meet my needs. The cluster.domaine.com certificate must also be present on all 3 boxes, because the cluster ip address is configured on all the boxes, and the role of the master is off if one of the boxes fails.

  For this reason I thought it would be a good idea to use 1 wildcard certificate (*. doman.com) on all boxes and avoid the hassle.

  No experience or recommendations?

  ARO

  / K

  I agree, I would like to you that since my deployment.

• VPN IPSEC ASA with counterpart with dynamic IP and certificates

  Hello!

  Someone please give me config the work of the ASA for ASA Site to Site IPSEC VPN with counterpart with dynamic IP and authentication certificates.

  He works with PSK authentication. But the connection landed at DefaultRAGroup instead of DefaultL2LGroup with certificate

  authentication.

  Should what special config I ask a DefaultRAGroup to activate the connection?

  Thank you!

  The ASA uses parts of the client cert DN to perform a tunnel-group  lookup to place the user in a group.  When "peer-id-validate req" is  defined the ASA also tries to compare the IKE ID (cert DN) with the  actual cert DN (also received in IKE negotiation), if the comparison  fails the connection fails. know you could set "peer-id-validate cert"  for the time being and the ASA will try to compare the values but allow  the connection if it cannot. 

  In general I would suggest using option "cert."

  With nocheck, we are simply not strict on IKE ID matchin the certificate, which is normally not a problem of security :-)

• EMU and certificates on C drive

  Hello

  Our clients use certificates to their online banking we want to manage with the help of EMU.

  Certificates must be located at the root of the C drive to the site of the Bank to detect and use them.

  Is there a way for EMU manage these certificates on the C drive?

  Thank you

  Hello

  EMU cannot manage settings of the profile of the user, is not possible to manage the certificates located on the C: drive.

  Kind regards

  Raymond