Cannot access the system files with permissions to access EFS and certificate are set correctly.

Similar Questions

• Cannot open the project file with write access.

  I saw that this problem has been reported before, but have yet to find a solution.

  I have my project file in an external hard drive.  When I plug the hard drive to another computer and want to save it, I get this message:

  "Cannot open the project file with write access.  The file may be locked, or you don't have permission to write to this location.  Select Save as... »

  I don't want to register as because other projects refer to this file and also my file is still going to be ruined.

  FYI two computers use Windows 7.

  All solutions?

  Right-click on the folder in Question and select Properties. Select tab security make sure you that you then add everyone to the list of users. Do you this by selecting edit and then add. Type in all members of the section of the object, and click ok. Then select all the user and check full control. Press Apply and we'll adjust the permissions for the folder and subfolders and files.

  Eric

  ADK

• Cannot open the PDM file with excel 2016

  Hey guys,.

  I have Office 2016, LV 2015 and (I checked my "TDM Excel Add-in" file) the Excel Add-in 2015 of CT.

  I have attached a picture of what I get when I try to open the PDM file with excel.

  So, I found something strange. I checked active supplements under the excel options and the TDM Excel Add-in is listed as inactive (and is called a COM-add-in). I tried to activate it, by checking the box (see the second picture), but that does not change. Interesting is the last line of my second attached photo:

  Translated it means: ' loading behavior: a runtime error occurred when trying to load this Add-In.

  I have 10-64 bit operating system like windows.

  Someone at - it a solution?

  Kind regards

  Slev1n

  
  

• Cannot use the system update with WIndows 7 SP 1 for UN-installing IE11 - impossible to re - install IE11!

  I have the day together system prompt before downloading and installing. When I had the time of who is running the last invite nothing would install and ' check for updates ' stopped working. The two move to a phase of 'work' but is not progressing.

  Search through this forum, I came to management may be incorrect which previously uninstall IE 11 must be the origin of the problem (System Troubleshooting update does not provide a solution) but when I download and try to re - install manually, it says that IE 11 cannot be installed as a more up-to-date version is already installed.

  He's not... Although a folder "internet explore" is always present; the ieinstal.exe is non-responsive (even when run as administrator) and I can't delete the folder because:

  "You need permission from TrustedInstaller to make changes to this file.

  I don't have a point system before uninstalling IE 11 of restoration and we tried disabling my AV during execution of update of the system, for the moment I'll have to find and manually install the security updates, which is a tedious exercise.

  Someone has encountered this problem, and more importantly have a solution?

  My apologies if I missed the answer elsewhere and thank you in advance for any help.

  IE is not uninstalled or reinstalled unless you have a version of Windows N/K/KN, these have been sold in Europe and Korea.  It is a component of Windows Basic.

  Check your edition of Windows in the Control Panel, System.  There K/N/KN after the name of the [Home premium etc] edition?

  If this is not the case then you have a standard version and you can unload or reload IE to

  Control Panel,

  View by - small icons

  Programs & features,

  Turn on or off Windows features

  Set / uncheck the box next to Internet Explore [for reload / unload],.

  Ok

  Ok

  It will make you then restart the computer for the change to take effect.

  How did you "Uninstall" IE?  It is possible that this Act has damaged the system.

  Denis

• Cannot save the Lightroom files after editing in Photoshop CC (or they are invisible).

  When I export a file from Photoshop CC 2015.1.1 in Lightroom, the "Edit a copy" screen does not appear.  The image opens in Photoshop, I make the changes, press on save, close Photoshop and I went back to Lightroom with no new image modified either because it has never made a copy in the first place the new file edition is invisible (see below).  Spent hours on the phone with Adobe and we theorized it was multiple copies of Photoshop on different drives.  I physically removed all disks except one, and the problem remains.  Have uninstalled and reinstalled several times. I have the latest version at all (it started with c. 2015.1.1).  Photoshop 6 works very well and doesn't have this problem, although I have copies of 6 PS on several other non Adobe software players works fine too.

  If there is more than one custom "slot" for external editors in Lightroom, I wouldn't even post this question because I could bypass Photoshop CC entirely.  But as it is, one of my two choices of editor external links Photoshop CC.

  Tip: If I put the file in the quick Collection, things are like the old days.  I get the screen to export, a copy is created, modified in Photoshop CC and when Photoshop CC is closed, the modified version is visible in Lightroom.  However, when I try to move the file edited in quick Collection in the folder where it belongs, Lightroom says that it's already there - which it may be, but it is invisible.

  P.S. I just discovered that it IS possible to specify more than one external editor, this is a temporary solution, given that I can use Photoshop 6 and like many other apps I want instead of PS CC.

  If Photoshop is the main editor in Lightroom, it will not ask to create a copy for raw images.

• Cannot open the zip file with windows vista causes flashes when right click on the mouse

  When I try to open pictures sent on Zip file by right-clicking mouse screen starts blinking non-stop. Having to stop to computer. Windows vista ultimate operating system.

  Thank you
  Raymond

  See the thread is if it helps:

  IE8 crashes when opening zip files
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/zip-files-IE8-crashes-when-opening/f91ee0fd-99A5-4993-AC37-a0c461dc9b9b

• Cannot open the PNG files with adobe reader.

  

  I've uninstalled and reinstalled the software adobe reader.  I am able to open these types of files in other formats.  Any suggestions?

  Hi Lee,.

  Adobe Reader is able to open PDF files only.

  Make a right click on the selection of .png file open with-> choose the default as "Windows Photo Viewer" to open the images.

  Kind regards

  Nicos

• Is there a way I can back up my entire iMac G5 on a USB key (with the exception of the system files)

  I have an old imac running 10.4.11 G5 ppc and I want to get rid of it, but I want everything except the system files and crap that I don't need the backup. I want beck it upwards on a disc of void

  You should be able to create a backup on the disk USB 2.0 to your content

  a former Mac PPC; the files could be read by applications or made

  be opened by apps later (or those who converted to the future, if possible.)

  The limits for rotational USB or USB flash drives were related

  the inability of the OS X to start the old Macs for these drives. The

  the files themselves should be OK to be read from said readers.

  You may be sure choose "ignore permissions" as appropriate

  on the drives where the old user accounts can stifle access to their content. Or

  create a duplicate of the old files on a different drive, convert the need

  for a more recent application. You can make a duplicate of the old together

  drive with a clone utility. SuperDuper, double or utility disk peut

  do large duplicates. Disk utility can make a disk image. Other applications

  could be tempted to see if you could save-as or convert a newer version.

  Good luck!

• The remote access connection manager could not start. Error 2: cannot find the specified file.

  I've updated from vista to the most recent update.

  I have windows vista Home premium 32-bit.
  I want to get this matter resolved without having to reinstall as I have a few games installed it on this system.
  The modem is not the issue as other computers connect very well.
  Thanks for the help from Microsoft.
  Recently, I tried to connect to the internet but that was not possible, because no connection could be established. The remote access connection manager does not start 2 error: could not find the specified domain. the RasMan-dependent services are started, but Manager logins remote does not start.

  Hi Mundilfar,

  You can try the folliwng steps and see if it helps.

  Step 1:

  You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2:

  If you are always faced with the question, then you can try to give permission for the Rasman registry key and see if it helps.

  Important: The following steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  a. Click Start, type regedit in the search box and press ENTER.

  b. Locate the following subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan

  c. right click on the key and click Permissions.

  d. Select Advanced, click on owner tab, click your user name, and check the 'Replace owner of subcontainers and objects', click Apply - click OK.

  e. click the user or group name that you want to work with.

  f. check allow total control. Click apply and then click OK.

  g. restart the computer and check.

  Hope this information is useful.

• Windows 7 Task Scheduler error: the system cannot find the specified file.

  Here is information when you try to change the properties of a task in the Task Scheduler:

  FX: {c7b8fb06-bfe1-4c2e-9217-7a69a95bbac4}

  The system cannot find the specified file. (Exception from HRESULT: 0 x 80070002)

  Type of exception: System.IO.FileNotFoundException

  at Microsoft.Windows.ManagementUI.CombinedControls.INetwork.GetName)

  to Microsoft.Windows.ManagementUI.CombinedControls.UINetwork.GetUINetwork (network INetwork)

  at Microsoft.Windows.ManagementUI.CombinedControls.NetworkListManager.GetNetworkList)

  at Microsoft.Windows.ManagementUI.CombinedControls.ControlTaskConditions.PopulateNetworkComboBox)

  at Microsoft.Windows.ManagementUI.CombinedControls.ControlTaskConditions.InitializeConditions)

  at Microsoft.Windows.ManagementUI.CombinedControls.EditTaskDialog.InitializeView)

  at Microsoft.Windows.ManagementUI.CombinedControls.EditTaskDialog.Initialize (file UITaskFolder, String taskName, String title, UserChoice userAction, BaseResultsControl inOwnerView, String inXmlText)

  at Microsoft.Windows.ManagementUI.CombinedControls.BaseResultsControl.EditTask (UITaskFolder file, String TaskName)

  to System.Windows.Forms.MenuItem.OnClick (ByVal e As EventArgs)

  at System.Windows.Forms.Command.Invoke)

  at System.Windows.Forms.Control.WmCommand (Message & m)

  at System.Windows.Forms.Control.WndProc (Message & m)

  at System.Windows.Forms.ListView.WndProc (Message & m)

  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)

  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Setup error "the system cannot find the specified file" (hpzprl40.exe)

  Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops.  Help, please.

  Hi loveisus,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

• Remote Desktop error: the system cannot find the specified file. C:\WINDOWS\system32\ < LANG_NAME > \mstsc.exe.MUI

  Came across an interesting problem this morning. After starting my PC from various applications (OutLook 2002, Management Studio of SQL Server 2008, etc.). I was able to connect to a server by using Remote Desktop (RDP, alias). On trying to connect to a second system, I started getting the following error message:

  The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

  Will always be connected to the server, I tried to launch a second instance using RDP, but received the same error message.

  I googled the error and found different solutions (the best solution to examine ishttp://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/164d1e0b-51e6-4201-9dc2-3f4a0ccb14e5), however, none of the solutions seemed to work.

  I tried checking the virus/malware, etc, but nothing was found. I tried to re - load the dll and the exe (s), but still not received the error message.

  The next solution was to try to see what can be changed on my system (new programs, etc.). I noticed there is an update downloaded to my system (C:\Windows\WindowsUpdate.log): AutomaticUpdates content success install successful and Restart required for the following update: update for Windows XP (KB969084)... the update is related to remote desktop.

  I rebooted the system, still not received the RDP error messages. Is I did a complete "install updates and shut down ', and then restarted my system that started working again.

  For the record, here is some information on my system:

  XP Professional: Version 5.1 (Build 2600.xpsp_sp3_gdr.091208 - 2036: Service Pack 3)

  c:\windows\system32\mstsc.exe: 6.1.7600.16385

  I wanted to just post this in case someone else runs into a similar problem...

  Thank you!

  Argue for your limitations and of course they will belong. -Richard Bach, Illusions

  I have a machine with the same problem

  XP Professional: Version 5.1 (Build 2600

  I installed the update for Windows XP (KB969084).

  It does not, but a reboot is required because the system is running on the old dll

  MSTSC.exe works now

  Thanks for the info!

• Error 2: The system cannot find the specified file

  Failed to start the Windows Audio service on the local computer. Error 2: The system cannot find the specified file.

  Help, please
  Sam

  What version of Windows, including service pack (right click on my computer > properties)

  What past just before the problem arises?

  Click Start > run > services.msc > OK
  Scroll down to "Windows Audio"

  The Windows Audio service must be started and its "Startup type" should be "automatic".  If it is not started, double-click the entry and click on the Start button.  If it is unable to start the service or instead generates an error message, the file for the Audio Service may have become corrupt or deleted (although this file has to be protected by Windows File Protection).

  Search for your system (probably C :) drive
          
  audiosrv. DL (it's only one L)

  Make sure to look in the "system folders" "hidden files and folders," and "subfolders.

  You should find the audiosrv.dll (with two Ls) in C:\Windows\system32.

  If she is not there, it should be in C:\Windows\ServicePackFiles\i386

  If it's not there either, you have a file named audiosrv.dl_ in C:\i386?

• "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file

  Hey all,.

  I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?

  Hi tripleb316,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• System cannot find the specified file "[path]" \hpzshl.ice_suffix.. ". exe"on Windows 8.1

  I've updated my OS to Windows 7 64-bit edition of Windows 8.1 pro 64-bit, and when you try to reinstall the software and the driver for my printer HP Officejet J4580 all-in-one I get all sorts of errors. It worked perfectly on Windows 7.

  I get the most common error is: System cannot find the specified file "[path]" \hpzshl.ice_suffix.. ". exe', as well as the facility is abandoned.

  I tried a lot of solutions from the HP Web site and these forums, but my problem is still there.

  I already tried the long solution presented here:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/install-error-quot-the-system-cannot-f...

  and

  http://support.HP.com/us-en/document/c04206080

  I even found the directory where installation has been decompressed and copied to the desktop, but the error persists.

  I need the complete software because I need to use my printer Officejet scanner, so I can't just simply print drivers.

  I need desperate help on getting this new work.

  Specifications of the computer:

  CPU: Intel Core i7 - 4820 K Quad-Core 3.70 GHz 10 MB Intel Smart Cache LGA2011

  : DDR3 memory / 1866 MHz Quad Channel 16GB (4GBx4)

  Printer: HP Officejet J4580 all-in-one; connected via USB

  OS: 8.1 Pro 64 bit Windows

  GPU: AMD Radeon R9 200 series

  I finally solved it by myself after many hours of pain.

  I clean any installation of HP from my computer using the HP Officejet software and driver removal utility:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-110151-1&cc=us&DLC=en&LC=en&OS=4158&product=3645100&sw_lang=

  After the computer restarts, I moved on the desktop, the installation directory unpacked that HP printer install wizard for Windows had previously downloaded and launched.

  I deleted all files in the directory %Temp%.

  I disabled McAfee antivirus real time and Windows Deffender analysis.

  I ran the setup.exe in the installation directory in my office.

  The installation is smoothly and completed. I have already tested the printer and all features function normally.

  I hope these steps help someone with similar problems to get the software installed.