Caching related error

Similar Questions

• Restart: Machine Check Exception Cache hierarchy error (18 events)

  I'm getting reboots on my machine all night (I have a few tasks planned during the night) which means that when I wake up scheduled tasks have not taken place.  Windows reports he had an unexpected restart and verification of that event viewer indicates that there are 18 of the WHEA-Logger event.

  Note: the machine is overclocked, but synchronization is a conservative OC using presets on the motherboard (4.6Gz was not stable so it is on 4.4, I have not tried to manually tweak it more because it's not worth the effort), with the RAM OC below the XMP profile supported.  A 4-hour race with Prime95 test complete instruction set (105W) showed no problems and a CPU temperature has not managed 60 c with considerably lower than that of the RAM, so I'm sure no problem with cooling.  In addition he has not been seen when running anything, only nights that has suspect me something in the States of sleep or power-saving modes is not responding well to a software or settings of the OC.

  System details:

  CPU: Intel i7 - 4770K 3.5Gz 3.9 thrust OC to 4.4 boost Haswell

  MoBo: ASUS Maximus formula VI

  RAM: 16GB TeamGroup XTreme 2600 to 2400

  GFX: NVidia GTX680 CUII Direct

  Drive system: Corsair Force 3 240GB SDD

  Data disk: Barracuda 3 TB Samsung

  OS: Windows 7 Ultimate with SP1 and updates

  Utility MoBo: HAVE suite 3

  Error details:

  Source: WHEA-Logger

  EventID: 18

  A fatal hardware error occurred.

  Reported by component: Processor Core
  Source of the error: Machine Check Exception
  Error type: error in Cache hierarchy
  Processor ID: 6

  Details of the event:

  
   
     
      18
      0
      2
      0
      0
      0 x 8000000000000000
     
      13356
     
     
      System
      Aurelie-PC
     
   
   
      3
      6
      1
      0xbf80000000000124
      0x415d01780
      0 x 86
      9
      1
      256
      2
      256
      0
      256
      256
      256
      928
     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
   
  

  I downloaded the minidump in my google docs to share:

  https://drive.Google.com/file/d/0BwKeBQWlRiHlNU5Md2VCWGpqSjA/edit?USP=sharing

  Any support you can give to help understand the cause would be useful

  Hello

  Thanks for the reply.

  I suggest you to post the question on the link below. His link of Windows 7 for the TechNet Support forums. They are the team who work for the issue that you are facing.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Feel free to write us if you still encounter problems related to Windows.

• Update cache - unexpected error of blocking for the repository & oracle.webcenter.framework.service.RepositoryVersion cannot be cast to oracle.webcenter.framework.service.RepositoryVersion

  Hello

  I noticed that the following errors appear often in my custom portals managed servers. Can anyone tell why these errors appear as I applied all the necessary patches?

  Oracle WebCenter Suite 11 g 11.1.1.8.0 portal applied Patch 21281035

  < 11 November 2015 11:00:08 SGT > < error > < oracle.webcenter.content.integration.spi.ucm.UCMCacheUpdateTimer > < WCS-55198 > < Cache update - unexpected error of blocking for the repository.

  java.lang.ExceptionInInitializerError

  at oracle.webcenter.content.internal.stellent.VCRConfigProvider.getRepositoryConfig(VCRConfigProvider.java:99)

  at oracle.webcenter.content.integration.federated.internal.delegate.RepositoryHelper.getRepositoryConfig(RepositoryHelper.java:601)

  at oracle.webcenter.content.integration.federated.internal.delegate.CacheHelper.getBinaryCache(CacheHelper.java:56)

  at oracle.webcenter.content.integration.federated.internal.delegate.CacheHelper.flushAllBinaryCacheEntries(CacheHelper.java:254)

  at oracle.webcenter.content.integration.federated.ContentCacheHelper.flushAllBinaryCacheEntries(ContentCacheHelper.java:54)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheHelper.invalidateNodeEntry(UCMCacheHelper.java:175)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheHelper.invalidateCacheEntries(UCMCacheHelper.java:138)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheUpdater.updateCaches(UCMCacheUpdater.java:83)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheUpdateTimer.run(UCMCacheUpdateTimer.java:105)

  at java.util.TimerThread.mainLoop(Timer.java:555)

  at java.util.TimerThread.run(Timer.java:505)

  Caused by: java.util.MissingResourceException: can't find oracle.webcenter.content.integration.internal.logging.VCRLogger bundle

  at java.util.logging.Logger.setupResourceInfo(Logger.java:1537)

  to java.util.logging.Logger. < init > (Logger.java:267)

  at java.util.logging.LogManager.demandLogger(LogManager.java:433)

  at java.util.logging.Logger.demandLogger(Logger.java:346)

  at java.util.logging.Logger.getLogger(Logger.java:442)

  at oracle.adf.share.logging.ADFLoggerFactory.getADFLogger(ADFLoggerFactory.java:63)

  at oracle.adf.share.logging.ADFLogger.createADFLogger(ADFLogger.java:221)

  to oracle.webcenter.content.integration.RepositoryException. < clinit > (RepositoryException.java:31)

  at oracle.webcenter.content.internal.stellent.VCRConfigProvider.getRepositoryConfig(VCRConfigProvider.java:99)

  at oracle.webcenter.content.integration.federated.internal.delegate.RepositoryHelper.getRepositoryConfig(RepositoryHelper.java:601)

  at oracle.webcenter.content.integration.federated.internal.delegate.CacheHelper.getBinaryCache(CacheHelper.java:56)

  at oracle.webcenter.content.integration.federated.internal.delegate.CacheHelper.flushAllBinaryCacheEntries(CacheHelper.java:254)

  at oracle.webcenter.content.integration.federated.ContentCacheHelper.flushAllBinaryCacheEntries(ContentCacheHelper.java:54)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheHelper.invalidateNodeEntry(UCMCacheHelper.java:175)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheHelper.invalidateCacheEntries(UCMCacheHelper.java:138)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheUpdater.updateCaches(UCMCacheUpdater.java:83)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheUpdateTimer.run(UCMCacheUpdateTimer.java:105)

  at java.util.TimerThread.mainLoop(Timer.java:555)

  at java.util.TimerThread.run(Timer.java:505)

  < 11 November 2015 11:01:07 SGT > < WARNING > < oracle.webcenter.notification.internal.model.util.FrameworkUtils > < BEA-000000 > <

  java.lang.ClassCastException: oracle.webcenter.framework.service.RepositoryVersion cannot be cast to oracle.webcenter.framework.service.RepositoryVersion

  at oracle.webcenter.framework.service.ServiceContext.getRepositoryVersionObject(ServiceContext.java:1283)

  at oracle.webcenter.framework.service.ServiceContext.getRepositoryVersion(ServiceContext.java:1185)

  at oracle.webcenter.framework.service.ServiceContext.isRepositoryVersionGreaterThanOrEqualTo(ServiceContext.java:1221)

  at oracle.webcenter.peopleconnections.profile.internal.extension.ProfileService.isConfigured(ProfileService.java:41)

  at oracle.webcenter.framework.service.ServiceRegistry.getAllConfiguredServices(ServiceRegistry.java:213)

  at oracle.webcenter.notification.internal.model.util.FrameworkUtils.loadServiceActivityTypes(FrameworkUtils.java:94)

  to oracle.webcenter.notification.internal.model.NotificationServiceImpl. < init > (NotificationServiceImpl.java:109)

  at oracle.webcenter.notification.NotificationServiceFactory.getNotificationService(NotificationServiceFactory.java:89)

  at oracle.webcenter.notification.internal.model.LifecycleListener.contextDestroyed(LifecycleListener.java:68)

  at oracle.webcenter.framework.internal.view.WCFrameworkContextListener.contextDestroyed(WCFrameworkContextListener.java:208)

  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:482)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.EventsManager.notifyContextDestroyedEvent(EventsManager.java:200)

  at weblogic.servlet.internal.WebAppServletContext.destroy(WebAppServletContext.java:3225)

  at weblogic.servlet.internal.ServletContextManager.destroyContext(ServletContextManager.java:247)

  at weblogic.servlet.internal.HttpServer.unloadWebApp(HttpServer.java:461)

  at weblogic.servlet.internal.WebAppModule.destroyContexts(WebAppModule.java:1545)

  at weblogic.servlet.internal.WebAppModule.deactivate(WebAppModule.java:509)

  to weblogic.application.internal.flow.ModuleStateDriver$ 2.previous(ModuleStateDriver.java:387)

  at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:223)

  at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:215)

  at weblogic.application.internal.flow.ModuleStateDriver.deactivate(ModuleStateDriver.java:141)

  at weblogic.application.internal.flow.ScopedModuleDriver.deactivate(ScopedModuleDriver.java:206)

  at weblogic.application.internal.flow.ModuleListenerInvoker.deactivate(ModuleListenerInvoker.java:261)

  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 2.previous(DeploymentCallbackFlow.java:547)

  at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:223)

  at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:215)

  at weblogic.application.internal.flow.DeploymentCallbackFlow.deactivate(DeploymentCallbackFlow.java:192)

  at weblogic.application.internal.flow.DeploymentCallbackFlow.deactivate(DeploymentCallbackFlow.java:184)

  to weblogic.application.internal.BaseDeployment$ 2.previous(BaseDeployment.java:677)

  at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:223)

  at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:215)

  at weblogic.application.internal.BaseDeployment.deactivate(BaseDeployment.java:234)

  at weblogic.application.internal.EarDeployment.deactivate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.deactivate(DeploymentStateChecker.java:198)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.deactivate(AppContainerInvoker.java:98)

  at weblogic.deploy.internal.targetserver.operations.DeactivateOperation.deactivate(DeactivateOperation.java:78)

  at weblogic.deploy.internal.targetserver.operations.RemoveOperation.removeDeployment(RemoveOperation.java:306)

  at weblogic.deploy.internal.targetserver.operations.RemoveOperation.doCommit(RemoveOperation.java:114)

  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)

  at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)

  at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)

  at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)

  at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)

  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)

  in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)

  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:68)

  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  >

  Hello

  Please apply the MLR 14 and check the box.

  If the problem persists, please update us with the WCC and newspapers of WCP.

• WS-Security related errors after upgrade to 11.1.1.5.0

  Hi all
  
  We were on
  
  SOA - 11.1.1.3.0
  AIA - 11.1.1.3.0
  WebLogic - 10.3.3.0
  
  and upgrade,
  
  SOA - 11.1.1.5.0
  AIA - 11.1.1.5.0
  WebLogic - 10.3.5.0
  
  Since then we have been making mistakes similar to the one below,
  
  ORAMED-03302: unexpected exception [exception relating to the execution of oneway] in a one-way "CreatePurchaseOrderList" on the "CreatePurchaseOrderListMarReqABCSImpl" reference operation
  Possible solution: check if the referral service is correctly configured and running or look exceptional for the analysis of the reason or contact Oracle Support. Cause: javax. Xml.WS.SOAP.SOAPFaultException:
  
  
  InvalidSecurity: error in the treatment of the security WS-Security header
  
  Can anyone provide a clue as to what could have gone wrong?
  
  Thank you
  Anish.

  Anish,
  from your description, it seems that you have an applicant transport adapter do not call your ABC applicant, correct?

  It comes from the fact that ABC is automatically secured in AIA 11.1.1.4 go. See the chapter in safety in the Guide of the developer for more information.

  So in your transport adapter, you must add a client-side strategy to reference pointing to your applicant ABC. The typical strategy to use here is "oracle/aia_wss10_saml_token_client_policy_OPT_ON. You can join that in MS by selecting the composite transport adapter, then the words "CreatePurchaseOrderListMarReqABCSImpl" and add the above policy.

  Gerhard

• 10.1.2 iMovie crashes while editing. Failed attempts to re - open. Open with the option key down key allows you to delete the preferences but contains a relative error incompatible graphics card will then appear.  With the help of El Capitan

  iMovie 10.1.2 falls down during editing of a film, usually by doing something like adding a title or a transition.  Failed attempts to restart.  Try to reboot with the option key + command allow you to remove preferences.  Then either receive an error indicating that the graphics card is incompatible or the application block requiring a force quite.  Restart or stop the iMac translates the suspended system requiring a manual stop holding down the Start button.  Restart in Safe Mode and then the normal startup will allow iMovie to load.  But after a few minutes of work with the program, it crashes and scenario again.  I use El Capitan 10.5.11 on an iMac of 2013.  I deleted the iMovie app and reloaded it, no change.  Someone has an idea for a fix?

  What are the specifications of your clips you want to change? Try to create a new user and see if FCPX is behaving.

• CD burner related error messages

  Hello, I was wondering if someone could help me? I had a problem with my cd burner, it keeps saying that I have an error. When I manage to save it on the cd it he damaged and then still doesn't work.
  no idea how I might be able to sort it out?
  Louise

  [Edited by: admin on 2 October 05 18:08]

  Hello

  It will be interesting to know what error message occur exactly. Drivers for CD or DVD burning problems are not easy to locate. If the player doesn't work correctly there must be several reasons. The lens may be dirty, problem with the calibration of the lens or different media can not be read correctly. The only thing you can do is check the process of engraving with a few different burning software and the media.

  JP troubleshooting has been quite right. If there is no positive result and if the warranty is still valid, contact the customer Service of your country partner and let check the unit. I am really out of idea what you can try from here. Perhaps remove device from Device Manager and reboot the device, but I don t think this will help.

  Good bye

• How to fix thisand related errors C:\DOCUME~1\Scott\LOCALS~1\Temp\8e91_appcompat.txt

  When I open my file to load down, either online or offline file freezes the pc and I get this message

  C:\DOCUME~1\Scott\LOCALS~1\Temp\8e91_appcompat.txt I have down loaded a fix? and may have gotten a similar message-

  Hello scottmc ny,.

  What version of Windows XP and service pack are you running?  You only an error when you access your download folder or this happens with other folders?  If the system works, what do you think might have changed since the last time it did not work properly?

  Little matter that you use for malware protection, that

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  Restart your computer and solve the outstanding issues.

• Errors of Windows Firewall and other related errors

  My computer was reset the network settings on the Proxy Server. I scanned a zero access Root using McAfee antivirus, but it said that I own.

  I can't install the update of windows (KB2847927) security. I get the error code 80070005. I also get error 1068 and error 5 when trying other solutions online.

  Recently, I uninstalled my suite McAffee Virus in order to add a new (do not have) but am not sure if this is the source of the problems. Do not remember if this took place the same day or a later version.

  Hello Tarriver,

  You can try to follow the following suggestions to solve the problem with firewall errors and problems of scanning of SFC.

  Run the disk check to find and fix errors on the disc.

  (a) click Start, type cmd, right click on cmd and click run as administrator.

  (b) at the command prompt, type chkdsk /f /r and press to enter.

  For more information on ""check a drive for errors " visit this link:"

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  Also, try to check the issue in a new user account and see if that helps. To create a user account follow this link:

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

  Thank you

• Windows 7 - various & probably related errors / order & Search box doesn't work not + Media Player media information is not displayed

  For the last two weeks, I had problems with my user. I suspect that these are permission-related because the problems occur with my user and not the other user on my PC. Curiously however, my user is ADMINISTRATOR permissions so I do not understand why I can do less than the other user. I had the following problems:

  (1) if I go to the search box and try to enter a search string, then first the letters I type do not appear in the box but no research takes place
  (2) if I insert a CD and the Media Player is launched, I see no data media. The CD names and titles do not appear. If I use the other user on the PC there is no problem in this information that is retrieved.
  I hope someone can help.
  Thank you!

  Before do you anything else - create two additional password Admin users & create disks to reset password for each of them.

  Your symptoms are compatible with corruption on the user profile, and you don't want to get stuck without any functioning Admin accounts.

• Domain related errors

  Hello
  
  We are facing problems from time to time we receive the error:
  
  
  GWTDOMAIN.2172.6524.0: LIBGWT_CAT:1249: WARN: connect to address //10.0.34.65:20001 MFMDOM failed, error network (10035)
  GWTDOMAIN.2172.6524.0: LIBGWT_CAT:1304: warning: no longer remote address domain for the remote domain MFMDOM
  GWTDOMAIN.2172.6524.0: LIBGWT_CAT:1008: ERROR: unable to connect to the remote domain (networkid = < DPKO >); 10035 network error code
  GWTDOMAIN.2172.6524.0: LIBGWT_CAT:1249: WARN: connect to address //10.0.34.65:20001 MFMDOM failed, error network (10035)
  GWTDOMAIN.2172.6524.0: LIBGWT_CAT:1304: warning: no longer remote address domain for the remote domain MFMDOM
  GWTDOMAIN.2172.6524.0: LIBGWT_CAT:1008: ERROR: unable to connect to the remote domain (networkid = < DPKO >); 10035 network error code
  
  
  Can anyone suggest what can be wrong?
  
  Thank you
  Tariq

  Hi Tariq,

  You can post the dmconfig of each machine files? Also, what version of Tuxedo do you use and do you run with patch current turnover? Duplicate connection can be caused if each area tries to connect to each other. When appears in the connection of the section, the gateway of the field realizes that there is a link in double and he simply falls. It's essentially a race condition that shouldn't cause any problems. It can be prevented by the presence of a connection policy value ON_STARTUP area and the other in INCOMING_ONLY. In both cases, this should not have caused to the doors of collision domain. If it is reproducible on the current version of Tux with current rolling patch, please open a support case and Oracle support you can intervene through the collection of the data necessary to track down the problem.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• Windows 7.0 x 64 update and other related errors

  Hello

  My box has windows 7.0 x 64 sp1.

  I am facing following three problems:

  1. cannot run windows update any more errot code 80072EFE and 0 x 80070057

  2 - when I close the PC restarts itself

  3. I can't seem to be able to save the configuration in iexplorer (esp. starup - start with the home page)

  These 3 problems emerged at the same time

  I followed the suggestion a lot I found everywhere, but it did not help anything.

  How could I go solve this frustrating problem?

  Hello

  Thank you for the update.

  I suggest to try the system restore and check. Choose a restore point prior to the start time of this issue.

  Refer to: System Restore

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I hope this helps.

• Relative error message to: CC and Premiere Pro, help

  For some reason, last Prime Minister of 2015 CC pro cough a message once a session by saying:

  "Saving the backup to the cloud creative projects requires a directory of files creative Cloud." Please install the desktop application creative Cloud on your computer to enable this feature. »

  On the one hand I have CC app on my desktop, but also cell phones - I turned it off on my laptop in the case that has confused the office - what to do? I love having my file of project saved on CC

  Hello Kent,

  Check this forum post if it helps: Autosave creative cloud

  Kind regards

  Navdeep Pandey

• Disk cache does not

  I use the add-on for the status of the Cache and noticed last week that the disk cache half of it shows 'not yet loaded. At first I thought that the problem was with the add-on, I even uninstalled and re-installed, but still got the same message. Then I realize that the error was because the disk cache is not active somehow.

  The upgrade to 11.0 FF last week, I made no changes to my configuration or installed any new Add-ons in weeks. I have a few additional modules related to the cache that I installed because I noticed this problem, in fact to diagnose this problem. All in their own way reiterates that the disk cache does not work.

  The page about: cache? device = disk is completely blank in my browser. The purpose: cache page only displays the information of the cache and hide offline (i.e. 0, since I have it is off).

  I added a "Cache" folder in my profile, and he has not made a difference.

  No, I did not order my disk cache folder to a different location on my hard drive.

  No, I'm not in navigation mode private unless there is a way to get in without my knowledge. With the menu editor I removed options incognito in my menus for a long time, since I never use it. He has also not checked in Options - Advanced - Privacy.

  Yes, I have checked all the cache-related on: configuration settings. Everything is as it should be activated and assigned to a certain size of the disk cache.

  How can I get this working again? It's a bit missing folder manually add to my profile, and if so, what is the path?

  This behavior is a feature, not a bug. When the "clear history of firefox closing" setting is selected, the option to clear the cache too, the disk cache is completely disabled. See https://bugzilla.mozilla.org/show_bug.cgi?id=709262 for more information.

  It took me a while to understand this one.

• Recovery post-Kitkat 'No order' error

  I clear my cache sometimes to make my phone work better and I have done this in the past, before I got the updated Tuesday, but after the update when I try the same Motorola help page instructions on how to clear the cache, an error "No command" appeared when I chose the option of recovery in the start menu so is this normal or is - this another bug of Kitkat?

  [strike] I had the same problem since the update of KitKat. [/strike]

  EDIT:

  On the screen "Order No.", press and hold power and volume + buttons for 3 seconds to access recovery.

• Error-201427 on PXI-5122 since NI MAX system

  I need to check that the PXI-5122 is supported by NO-Scope 4.0.0 under WINdows 7 64-bit. If so, I guess I can get a damaged card. The system was running under the old computer / code / drivers last month.

  Scenario is this: I'm upgrading of already running code to a new computer and 32-bit 64-bit CVI CVI. After plowing, of code tweaks, PXI, 5122 digitizer shows through a new error in the code. I go back NI Max and I get this related error when I try to post.

  "The driver could not communicate with PXISlot2, generates the following message:

  Error-201427 to the autotest

  Possible reasons:

  The specified device is not supported in the API OR-DAQmx.

  Specified device PXISlot2.

  Seeing this, I have tried NOR updated, and nothing has been marked. I shut down the system and reseat the card. Then I checked the version of NOR-Scope (was 3.9.4) OR MAX I downloaded manually OR-Scope 4.0.0. Same mistake.

  The 5122 is in slot 2 and NI MAX identifies the card as "2: NOR-PXI-5122"PXISlot2"

  More information on the current system

  Dell Precision T3600

  Win7 64 bit Enterprise SP1

  Spincore NMR TIming Pulsebalster PCI card

  PCIe copper x 4 remote link to the chassis OR 1062 q

  In the NI 1062 q

  Slot 1: NI SMU-8370 remote control

  Slot 2: OR PXI-5122

  SLOT3: NOR SMU-5442

  Slot 4: reports of empty in fact NEITHER SMU-8262 linked to a NI PCIe-8263 (shows in Windows, normal visibility NI Max is unknown)

  Slot 5: OR PXI-6733

  Slot 6: OR PXI-6733

  Slot 7: vacuum

  Slot8: OR PXI-5421

  Measurement and Automation Explorer System Information (current after upgrade NI-Scope) is attached

  Before I track down a loan 5122, I wanted to see if there are known incompatibilities that come to mind.

  Thanks in advance.

  There is a material-200313 error on the map (and the first replacement) as revealed by an earlier version of NIMAX (another computer and PXI chassis). The information contained in the attached document can help improve diagnosis in the future (rather than the more highest credits of the error).

  With a third scanner system is running.