Recovery post-Kitkat 'No order' error

Similar Questions

• affected; error recovery Thotkey has no code error 0 x 00031402, 0 x 00000002

  whener I start computer running Windows XP Home edition, I get this error message, I have X, but the start-up delays:

  "
  affected; error recovery Thotkey has no code error 0 x 00031402, 0 x 00000002.
  Suggestions please...
  Thank you

  Hi initty,

  1. Did you the latest changes on the computer?
  2. What is the number and the model of the computer?

  Method 1

  If you are using a laptop, I suggest that you update the drivers for the touchpad from the laptop manufacturer's website and check if it helps.

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• The database recovery/restore failed with unexpected error 509

  Hello

  The database recovery/restore failed with unexpected error 509

  In the Event Viewer, I had this error SEVERAL times every second.  He goes absolutely crazy.

  I don't know what to do with it.

  I'm with Windows 8 Pro running on a very stable computer with 8gig of ram, plenty of hard drive space.  Each single drivers updated Windows Update.  Everything is really clean except this error in Event Viewer

  Svchost SRUJet (1624): database recovery/restore failed with unexpected-509 error.

  Task category: registration/recovery

  Esentutl /p /r tried / everything but nothing wrong was found with those

  Thanks for any help.

  Exactly the same problem, nothing Microsoft recommended was the cause, scannow and DISM commands are returned without error.

  So I went to the event viewer and scrolled down to find, when these errors began to occur. So I found a few entries initially saying things like: an attempt to move the file 'C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\EDB.log' to 'C:\Users\xxxxxxxx\AppData\Local\TileDataLayer\Database\EDB00008.log' failed indicating system 183 (0x000000b7) error: "cannot create a file when that file already exists.

  Then, I went to C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\ and removed the files listed (e.g., EDB00008.log).

  Bingo, the errors will stop immediately.

• CD1 Satellite A200 poster 10-FC06-0002 error recovery

  Sorry for my English.

  I use my recovery CD1 and after 10 minutes an error error 10-fc06-0002 of writing. I want to just restore like new with Vista.

  What should do?
  I have the Satellite A200-AH8
  Thank you

  Hello

  To be honest, I don't see a lot of different solutions. In my opinion, it may be problem with support for recovering damaged or HARD drive.
  Enter the BIOS settings, set the defaults and try to reinstall Vista. If the same thing happen again contact nearest Toshiba authorized maintainer and explain the situation. I'm sure they can test with another CD of recovery or test with the other HARD drive.

• repair and recovery poster error 0 * 570

  Hello Mr President! Jemy my name is. I have a problem in terms of repair and recovery Windows Vistar. When I repair and recovery there. It still shows the error 0 * 570 problem

  and the system cannot adapt the automated problem.

  Hello

  If the question is 570 error Code then I suggest you check the link.
  If the question is not that, then provides us with some additional information
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-code-570-user-ID-failed/29909712-ef49-46FE-950D-880c26c7f168

• Satellite L300D - recovery disk stops with an error message

  Hello

  I don't read a lot of the other post, but foung no response...

  My problem:
  I bought a L300D Vista 1Y there are no included recovery disks, so I made the recovery disc. Now, we wanted to reinstall Vista, so I tried the recovery disk, but after 15 minutes, it failed with an error message:

  After successfully in 3 partitions of partitioning and formatting them the ImageX tool starts to extract VISTA

  After about 57% C:eindows\winsxs\x86_microsoft-windows-ehome-ehcird_31...35.6.0.6000.16663_...\ehcir.ird [removeExtract ToFileByStruct WIMcopyFileEx failed]

  Retry...
  [error 1117]

  What happenes about 5 times with similar messages (but other numbers), til message
  The request could not be performed because of an i/o error

  ERROR: ImageX could not to VISTA Lawrence drive HARD C: 2 V: HDD

  Press a key...

  Aftre reading the threads, I ordered an official recovery (35 Euro!) since the Office of service Toshiba disc, but I got the same errors and messages...

  Any ideas what I should do now?

  Thank you!!

  PS I never had these problems with my other laptops...

  Hello

  My friend who s a long story.

  It's not easy to say what the reason is for this, but to me it sounds like that there is something wrong with the HARD drive. In your case I would format the HARD drive before launching the recovery disc. You can do this with a Microsoft disk to format the whole HARD drive. After that try the recovery disk again.

  If it doesn't work, you should check the HARD drive with a special HARD drive diagnostic tool like Drive Fitness Test. use Google to find it, it s freeware and takes only a few minutes.

  Welcome them

• Satellite L500 - cannot create recovery discs - 0D00F6-49-00000001 error

  Hello

  My pc start up after that I did a system restore. For example, I can't use the function fn key.

  Last week I tried to format my pc. But when I opened the TOSHIBA Recovery Disc Creator got an untimely error 00000001-49-0D00F6.

  I've managed to create 2 4 DVDs. IM using Dvd - r from memorex.
  If anyone can help.

  Thanks in advance for your help.

  This is the first time that you try to create recovery discs?

  How you created 2 discs if the Toshiba recovery disc creator starts by mistake?

  Anyway, in this forum you will find similar topics. No doubt some recovery file is damaged, and the drive could not be created.
  I put t think that there is something that you can about it. Either it works or not. Maybe you should contact the nearest Toshiba service and explain the situation. I hope they can help you with this and disc Toshiba DVD original to order for you.

• Satellite C670 - Recovery Media Creator launch! Error link

  (Google translation)
  Hello

  Recovery Media Creator will not start. Missing link, error 'TRMCLcher.exe '.
  I can't find the software on the Toshiba site!
  Here's what the file contains Toshiba Recovery Media Creator:
  http://hpics.Li/6dfd626

  Where can I find Toshiba Recovery Media Creator?

  Thank you

  Richard

  Hello

  Toshiba recovery media creator is only preinstalled on your laptop and cannot be downloaded. I put t know why the program doesn't start anymore but you have deleted this file or uninstalled any tool from Toshiba? This would explain why recovery media creator doesn t start

  The only option you have is to reinstall the OS again. You can use the HARD drive recovery function, as described in your user manual or follow the link posted by Timox.

  If you have already created the recovery media, you can forget it, but otherwise it is important that you are installing to HARD drive recovery and create the recovery media. As you can see in other threads some users would need the support of recovery but they n t does so don t make the same mistake ;)

• recovery disk will not load error message pc not supported by the system recovery disk.

  had a virus that has taken possession of my PC and wanted the money order to the for free, so I install the recovery disk and chosen in advance and restored the pc at the time, he removed the hold and the system worked very well for a few days. then the system kept to self-extinguish. tried loanding the recovery disc and gave me the message pc not supported by the recovery disc, and now when start received bios award phoenix instead of the hp logo.

  attempted to run antivirus software but before he could finish short scan the pc shuts off I tried in safe mode and the same situation. I downloaded several antivirus programs, but it would still be closed the pc. I tried to install the recovery disk, and it gave me an error message pc not supported by the system recovery disk. now when I start up instead of the blue screen with HP logo, I get a bios award phoenix and other information that I can't copy down it goes too fast. Since I couldn't get rid of the virus, he took to a pc using store, they have removed the virus and loading of operating system vista, problem is I had the word and excel. Now, I can not get my desktop to factory oem computer. I really need my word that I have all my passwords for the accounts listed, I saved them to analyze the drive, but now I have not any other readers like drive j. Any suggestion on how to solve the problem, so I can load the recovery disc.

  Thank you very much

  Frenchquarter, welcome to the forum.

  I suggest that you download and install OpenOffice.  It is FREE and is open to all documents created in MS Office.  If it doesn't, at least it costs you nothing to try.

  I used OpenOffice for years.  Believe me when I say that he will do everything that will make MS Office and in some cases, the better.  At least, you will have to use in the future and you'll be amazed to see how they can do it for FREE.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• Data recovery backup job fails with error-3902

  Version of the device - 1.2.0.1131

  Data store - cifs datastore - 489 gb

  Number of backup VMS - 26

  Average size vm - 25 GB

  Question I get is "unable to create snaptshot for vmnamehere, error-3902 (file error)."

  I tried ping all the esx host, which works very well, as well as vcenter host, very much so.  I put the esx hosts and vcenter host in/etc/hosts file too.

  I restarted the vdr unit that works very well.

  I can take snapshots of the virtual machines manually as well.

  Backups have worked on those virtual machines in the past and just stopped all of a sudden.

  Integrity controls work.

  What else can I try?

  Post edited by: kdon

  If money is not a problem I suggest go for vRanger veeam backup or connection of quest. It removes all the headaches I have with data recovery.

• Us. will not support recovery - post Satellite M45-S2693

  My daughter herself bought a Satellite M45-S2693 while in America there is a little more than 1 year. We now need the recovery media, so I rang the number of support of the USA to be told that they * _will friezer * post the DVD in the United Kingdom. Did someone knows a way around this problem?

  Thank you

  Hello

  I believe you that. Have you wondered why?

  Reverse may be to install your own WXP using the facilities of Microsoft CD. The drivers, tools and utilities that you can found on Toshiba support page http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp

• Creation of recovery disks ends with the error message

  I tried to create a recovery disc but got this message "cannot read the following D:\06491XP file. Water hydraulics Error Code: 020150-20-00000000 "at half way through the first DVD disck.

  That means and what I can do to create a recovery disk?

  Thanks for your help

  Hello

  You have linked to burn using TDK or Verbatim DVD-R? You see, some media only good acceptt cd/DVD burn :)

• How can I repair the BCD boot after a recovery on my W1-810 error

  Hi all

  I have a Tablet W1-810 for use with Win10. After a few months of its use, the system is more able to start. Only this message appears on a blue screen:

  Recovery
  Your PC needs to be repaired
  The Boot Configuration data file is missing some information required.
  File: \BCD
  Error code: 0xc0000034

  I found that this error may occur sometimes, and what is need to do to fix it (some commands in the shell of the collection). But unfortunately the Tablet has a single usb port, and I wasn't able to connect also a keyboard while I'm starting on a USB key. Also a double connector OTG with separate power supply did not help, because it seems that then the boot process has not worked from the USB. Unfortunately in the recovery of Windows (win PE or Win RE) is not avalible OnScreenKeyboard, I've not found so far a way to solve this error of BCD.

  I hope someone here has an idea for that
  BR

  MP

  The most simple solution is to plug in a USB hub you can do multiple devices on a port. You can't really get into recovery without the recovery image options, and requires the USB connect. At this point in the boot sequence, there is no bluetooth stack and the thing of the BIOS to use the volume buttons to scroll a list has been disabled. Something like this might be overkill, but the price is reasonable. If you think you might want to connect an external HD or DVD at some point, grab one with its own power supply instead of one unpowered. It is not too much more.

• recovery stops at 2% with error message "1005".

  My neighbor gave me his Pavilion dv5 - 1044ca to watch. She said she had fixed 2 years ago and never it has never worked since. When I boot it it reads "No device detected - start insert the startup disk and press a key" think there is a HARD question dock drive I removed the HARD drive and plugged into my drive. The drive is has 2 partitions is a recovery partition, the other is not empty no file what so ever. So I think that when they fixed 2 years ago, they must have replaced / reformat the drive and never reloaded the operating system. I asked if she has ever received records. She give me two discs with HP recovery written on them. I was able to get into the Recovery Manager and it loads to the 2% mark and has frozen with the message "error contact HP 1005". Tried several times but never gets beyond the 2%.

  Any help you could give me would be greatly appreciated.

  I have solved the problem... Read in another forum that the recovery disk must be written on DVD + r is not and here I have the recovery disk have been written about format - a. copy the image to the right format and got exceeded the 2% and 6 minutes from completion.

• WIN8 64bits - Recovery manager has stopped working error message

  Hello world. Just bought a computer laptop 1310sa m6 with envy. I tried to create a rescue disk set by using the Recovery Manager. It does not start, just gives the error message "Recovery Manager has stopped working." and then informs me that windows is collecting information and inform me a solution... Being that this machine is only 2 days is a bit much that parties do not work, in my opinion, one most important parts who! Has anyone encountered this and y at - it a solution?

  I tried to do a shadow with an O & O 7 disc image, works fine, but could not create a boot disk for a reason any (and Yes, I was using a 64-bit program!)

  Any help and advice would be accepted with gratitude

  JUST found the solution! DON'T bother with the HP Utility App Center. Go to search and type 'recover' and it will give you the option to create rescue disks... And it worked on my computer without any error message