Calculation of Bill using SQL

Similar Questions

• CRM using SQL database in an environment of small business often inaccessible with the following error message

  Hello

  This is my first time on this forum so bear with my ignorance!  I'll expose the background of my setup and then explain the error.

  We have a small business with a server running SBS2011 and PC running Windows 8 and 8.1 connected to the server in a domain environment.

  We use a CRM product called Emu Tall that uses SQL Server 2008 R2 on the server for the database and the PC run a local application that connects to this database.

  On a daily basis, but completely randomly and sometimes several times a day, a user will try and open the application on a PC and get the following error message.

  Could not load file or assembly 'Microsoft.SqlServer.SqlEnum, Version = 10.0.0.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies. The system cannot find the specified file.

  At first, I thought it must be a matter of waiting time as it seemed to happen every morning, but I've proved since that it occurs at any time of the day and is apparently unrelated to amount of users or idle time or something like that.

  Here's another oddity that hopefully sheds some light on it. If I go to the server and open the CRM application on the server, it works very well since it is only the PC that have the connection problem.  In addition, as soon as I connected to the server of any PC can connect immediately (until it happens again later in the day).  I don't need to stay connected to the server, connect one time and close the session and he "fixed" it for a few hours for all PC users.

  I contacted the CRM vendor, and they are completely confused and have no idea what to do.

  We are trolling along at the moment with me opening a session on the server for launch launch whenever a user receives the error message but it is far from satisfactory.

  A final observation is that it does not always.  It used to work fine.  The problem began just two months ago and seems to coincide with the increase in our user from 5 to 12 users license even if the CRM provider swear that it is nothing to do with the license.  They may agree; I don't know enough to argue the point.

  Any help will be appreciated! I'm sure it will be a simple solution and someone there will know why and the answer immediately but is elusive at this time.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How to find the primary key columns in the tables in MS Access using SQL queries

  How to find the primary key columns in the tables in MS Access using SQL queries

  Hello

  This is the forum for Windows Vista programs related issues.

  For better assistance, please try instead the Forums in SQL Server .

  Thank you! Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Copy of database SQL from SQL 2005 using SQL Server Management Studio 2008

  I made a backup of the database and tried to do a cover but I don't know where is the database restored too.

  I connected the old PC to SQL with the new using SQL 2008 Management Studio.

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  "The MSDN SQL Server Forums.

  https://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Error occurs when you use SQL Server 2012 assessment vs window detail of the object in window 7 - KERNELBASE.dll exception 0xe0434352

  Hello

  Error occurs when you use SQL Server 2012 assessment vs window detail of the object in window 7.  I use the window of the object but the detail of the objects window arrives and immediately SQL Server stops with the error below and then opens again.  I didn't find any help with this specific error is but suspect there is a problem between SLQ Server 2012 et.NET Framework 4.  Unfortunately, I do not know what it takes in this regard.

  Thanks, Deb

  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Deb - HP
  Description:
  Name of the failing application: Ssms.exe, version: 2011.110.3000.0, time stamp: 0x5081c1cd
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b83c8a
  Exception code: 0xe0434352
  Offset: 0x0000c41f
  ID of the process failed: 0x13a8
  Start time of application vulnerabilities: 0x01ce609a6d3db991
  The failing application path: C:\tempSQLWOW\110\Tools\Binn\ManagementStudio\Ssms.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 1fb1cbfb-cc8e-11e2-b436-abd2bebb3f17

  Hi Claude,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  Good day!

  Answer please if you face concerns.

• XML data in the table using sql/plsql

  Hi experts,

  Could you please help with the following requirement. I have the tags xml (.xml on a server file) below. I need to access this file and read the XML and insert into the db table using sql and plsql. Is it possible with the cdata below? And there is a nested this table.

  Could someone please guide me if you have a sample code file and xml.

  <? XML version = "1.0" encoding = "UTF-8"? >

  < generation_date > <! [CDATA [17/11/2015]] > < / generation_date >

  < generated_by > <! [CDATA [Admin Admin]] > < / generated_by >

  < year > <! [CDATA [2015]] > < / year >

  < month > <! [CDATA [01]] > < / month >

  < author >

  < author > <! [CDATA [user author]] > < / author > < author_initial > <! [CDATA [user]] > < / author_firstname > < author_country > <! [CDATA [author]] > < / author_lastname >

  < author_email > <! [CDATA [[email protected]]] > < / author_email >

  < author_data_01 > <! [CDATA []] > < / author_data_01 >

  < author_data_02 > <! [CDATA []] > < / author_data_02 >

  < items >

  < article_item >

  < article_id > <! [CDATA [123456]] > < / article_id >

  < publication > <! [CDATA [Al Bayan]] > < / publication >

  < section > <! [CDATA [Local]] > < / section >

  < issue_date > <! [CDATA [11/11/2015]] > < / issue_date >

  < page > <! [CDATA [2]] > < / print this page >

  < article_title > <! [CDATA [title.]] > < / article_title > < number_of_words > <! [CDATA [165]] > < / number_of_words >

  < original_price > <! [CDATA [200]] > < / original_price >

  < original_price_currency > <! [CDATA [DEA]] > < / original_price_currency >

  < price > <! [CDATA [250]] > < / price >

  < price_currency > <! [CDATA [DEA]] > < / price_currency >

  < / article_item >

  < / articles >

  < total_amount > <! [CDATA [250]] > < / total_amount >

  < total_amount_currency > <! [CDATA [DEA]] > < / total_amount_currency >

  < / author >

  < / xml >

  Thanks in advance,

  Suman

  XMLTABLE using...

  SQL > ed
  A written file afiedt.buf

  1 with t (xml) as (select xmltype ('))
  2
  3
  4
  5
  6
  7
  8
  9
  10
  11
  [[12 [email protected]]] >
  13
  14
  15
  16
  17
  18
  19

  
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33 ") of the double)"
  34-

  
  35 end of sample data
  36-
  37 - assumptions:
  (38 - a) XML may have several tags
  (39 - b) each may contain more
  40-
  41 select x.gen_by, x.gen_date, x.mn, x.yr
  42, y.author, y.auth_fn, y.auth_ln, y.auth_cnt, y.auth_em, y.auth_d1, y.auth_d2
  43, z.id, z.pub, z.sec, z.iss_dt, z.pg, z.art_ttl, z.num_wrds, z.oprice, z.ocurr, z.price, z.curr
  44 t
  45, xmltable ('/ authxml')
  from $ 46 t.xml
  path of 47 columns gen_date varchar2 (10) '. / generation_date'
  48, path of varchar2 (15) of gen_by '. / generated_by'
  49, path of varchar2 (4) year '. "/ year"
  50 varchar2 (2) mn road '. "/ month"
  51, path of xmltype authors '.'
  52                 ) x
  53, xmltable ('/ authxml/authors ')
  from $ 54 x.authors
  author of 55 path of varchar2 columns (15) '. / author'
  56, path of varchar2 (10) of auth_fn '. / author_firstname'
  57, path of varchar2 (10) of auth_ln '. / author_lastname'
  58 road of VARCHAR2 (3) auth_cnt '. / author_country'
  59 road of varchar2 (20) of auth_em '. / author_email'
  60 road of varchar2 (5) of auth_d1 '. / author_data_01'
  61, path of varchar2 (5) of auth_d2 '. / author_data_02'
  62, path of xmltype articles '. / Articles'
  63                 ) y
  64, xmltable ('/ Articles/article_item ')
  from $ 65 y.articles
  path id 66 number columns '. / article_id'
  67, path of varchar2 (10) pub '. ' / publication.
  68 road of varchar2 (10) dry '. / section'
  69, path of varchar2 (10) of iss_dt '. / issue_date'
  70 road of VARCHAR2 (3) pg '. "/ print this page"
  71, path of varchar2 (20) of art_ttl '. / article_title'
  72, path of varchar2 (5) of num_wrds '. / number_of_words'
  73, path of varchar2 (5) of oprice '. / original_price'
  74 road to VARCHAR2 (3) ocurr '. / original_price_currency'
  75, path of varchar2 (5) price '. "/ price"
  76, path of VARCHAR2 (3) curr '. / price_currency'
  77*                ) z
  SQL > /.

  GEN_DATE GEN_BY YEAR MN AUTHOR AUTH_FN AUTH_LN AUT AUTH_EM AUTH_ AUTH_ ID PUB DRY ISS_DT PG ART_TTL NUM_W OPRIC HEARTS PRICE OCU
  ---------- --------------- ---- -- --------------- ---------- ---------- --- -------------------- ----- ----- ---------- ---------- ---------- ---------- --- -------------------- ----- ----- --- ----- ---
  17/11/2015 Admin Admin 2015 01 user author user author [email protected] 123456 UAE Al Bayan Local 11/11/2015 2 is the title.   165 200 AED AED 250

  Of course, you'll want to change the types of data, etc. as needed.

  I assumed that the XML can contain several "" sections and that each section can contain several entries.

  Thus the XMLTABLE aliasing as 'x' gives information of XML, and supplies the data associated with the XMLTABLE with alias 'y' which gets the multiple authors, which itself section of the XMLTABLE with alias 'z' for each of the article_item.

  CDATA stuff are handled automatically by SQLX (XML functionality integrated into Oracle's SQL)

• Import Export using SQL Developer

  People

  I have 6 tables whose data must be exported from a database and imported into the other. The structure of the table constraints etc. is the same across both of the DB.

  Database is 11g. Average amount of data in tables 5 is 2.5million contain lines and 1 340million.

  Could you please suggest the best possible way to the export and import of data using SQL Developer. Developer SQL version 3.2.20.09

  There is an option in the 'View' tab in Developer SQL by using 'DBA' but do not have s/n of these patterns. I am well aware expdp and impdp operations but it is managed by another team that can cause delays both want to do it myself.

  Can we do expdp and impdp on SQL Developer without access s/n?

  All of the suggestions.

  Thank you

  Simple method would be to create external table Using the ORACLE_DATAPUMP Access Driver. Its neat and fast.

  http://docs.Oracle.com/CD/B28359_01/server.111/b28319/et_dp_driver.htm#i1007502

• Question to load data using sql loader in staging table, and then in the main tables!

  Hello

  I'm trying to load data into our main database table using SQL LOADER. data will be provided in separate pipes csv files.

  I have develop a shell script to load the data and it works fine except one thing.

  Here are the details of a data to re-create the problem.

  Staging of the structure of the table in which data will be filled using sql loader

  create table stg_cmts_data (cmts_token varchar2 (30), CMTS_IP varchar2 (20));

  create table stg_link_data (dhcp_token varchar2 (30), cmts_to_add varchar2 (200));

  create table stg_dhcp_data (dhcp_token varchar2 (30), DHCP_IP varchar2 (20));

  DATA in the csv file-

  for stg_cmts_data-

  cmts_map_03092015_1.csv

  WNLB-CMTS-01-1. 10.15.0.1

  WNLB-CMTS-02-2 | 10.15.16.1

  WNLB-CMTS-03-3. 10.15.48.1

  WNLB-CMTS-04-4. 10.15.80.1

  WNLB-CMTS-05-5. 10.15.96.1

  for stg_dhcp_data-

  dhcp_map_03092015_1.csv

  DHCP-1-1-1. 10.25.23.10, 25.26.14.01

  DHCP-1-1-2. 56.25.111.25, 100.25.2.01

  DHCP-1-1-3. 25.255.3.01, 89.20.147.258

  DHCP-1-1-4. 10.25.26.36, 200.32.58.69

  DHCP-1-1-5 | 80.25.47.369, 60.258.14.10

  for stg_link_data

  cmts_dhcp_link_map_0309151623_1.csv

  DHCP-1-1-1. WNLB-CMTS-01-1,WNLB-CMTS-02-2

  DHCP-1-1-2. WNLB-CMTS-03-3,WNLB-CMTS-04-4,WNLB-CMTS-05-5

  DHCP-1-1-3. WNLB-CMTS-01-1

  DHCP-1-1-4. WNLB-CMTS-05-8,WNLB-CMTS-05-6,WNLB-CMTS-05-0,WNLB-CMTS-03-3

  DHCP-1-1-5 | WNLB-CMTS-02-2,WNLB-CMTS-04-4,WNLB-CMTS-05-7

  WNLB-DHCP-1-13 | WNLB-CMTS-02-2

  Now, after loading these data in the staging of table I have to fill the main database table

  create table subntwk (subntwk_nm varchar2 (20), subntwk_ip varchar2 (30));

  create table link (link_nm varchar2 (50));

  SQL scripts that I created to load data is like.

  coil load_cmts.log

  Set serveroutput on

  DECLARE

  CURSOR c_stg_cmts IS SELECT *.

  OF stg_cmts_data;

  TYPE t_stg_cmts IS TABLE OF stg_cmts_data % ROWTYPE INDEX BY pls_integer;

  l_stg_cmts t_stg_cmts;

  l_cmts_cnt NUMBER;

  l_cnt NUMBER;

  NUMBER of l_cnt_1;

  BEGIN

  OPEN c_stg_cmts.

  Get the c_stg_cmts COLLECT in BULK IN l_stg_cmts;

  BECAUSE me IN l_stg_cmts. FIRST... l_stg_cmts. LAST

  LOOP

  SELECT COUNT (1)

  IN l_cmts_cnt

  OF subntwk

  WHERE subntwk_nm = l_stg_cmts (i) .cmts_token;

  IF l_cmts_cnt < 1 THEN

  INSERT

  IN SUBNTWK

  (

  subntwk_nm

  )

  VALUES

  (

  l_stg_cmts (i) .cmts_token

  );

  DBMS_OUTPUT. Put_line ("token has been added: ' |") l_stg_cmts (i) .cmts_token);

  ON THE OTHER

  DBMS_OUTPUT. Put_line ("token is already present'");

  END IF;

  WHEN l_stg_cmts EXIT. COUNT = 0;

  END LOOP;

  commit;

  EXCEPTION

  WHILE OTHERS THEN

  Dbms_output.put_line ('ERROR' |) SQLERRM);

  END;

  /

  output

  for dhcp

  
  

  coil load_dhcp.log

  Set serveroutput on

  DECLARE

  CURSOR c_stg_dhcp IS SELECT *.

  OF stg_dhcp_data;

  TYPE t_stg_dhcp IS TABLE OF stg_dhcp_data % ROWTYPE INDEX BY pls_integer;

  l_stg_dhcp t_stg_dhcp;

  l_dhcp_cnt NUMBER;

  l_cnt NUMBER;

  NUMBER of l_cnt_1;

  BEGIN

  OPEN c_stg_dhcp.

  Get the c_stg_dhcp COLLECT in BULK IN l_stg_dhcp;

  BECAUSE me IN l_stg_dhcp. FIRST... l_stg_dhcp. LAST

  LOOP

  SELECT COUNT (1)

  IN l_dhcp_cnt

  OF subntwk

  WHERE subntwk_nm = l_stg_dhcp (i) .dhcp_token;

  IF l_dhcp_cnt < 1 THEN

  INSERT

  IN SUBNTWK

  (

  subntwk_nm

  )

  VALUES

  (

  l_stg_dhcp (i) .dhcp_token

  );

  DBMS_OUTPUT. Put_line ("token has been added: ' |") l_stg_dhcp (i) .dhcp_token);

  ON THE OTHER

  DBMS_OUTPUT. Put_line ("token is already present'");

  END IF;

  WHEN l_stg_dhcp EXIT. COUNT = 0;

  END LOOP;

  commit;

  EXCEPTION

  WHILE OTHERS THEN

  Dbms_output.put_line ('ERROR' |) SQLERRM);

  END;

  /

  output

  for link -.

  coil load_link.log

  Set serveroutput on

  DECLARE

  l_cmts_1 VARCHAR2 (4000 CHAR);

  l_cmts_add VARCHAR2 (200 CHAR);

  l_dhcp_cnt NUMBER;

  l_cmts_cnt NUMBER;

  l_link_cnt NUMBER;

  l_add_link_nm VARCHAR2 (200 CHAR);

  BEGIN

  FOR (IN) r

  SELECT dhcp_token, cmts_to_add | ',' cmts_add

  OF stg_link_data

  )

  LOOP

  l_cmts_1: = r.cmts_add;

  l_cmts_add: = TRIM (SUBSTR (l_cmts_1, 1, INSTR (l_cmts_1, ',') - 1));

  SELECT COUNT (1)

  IN l_dhcp_cnt

  OF subntwk

  WHERE subntwk_nm = r.dhcp_token;

  IF l_dhcp_cnt = 0 THEN

  DBMS_OUTPUT. Put_line ("device not found: ' |") r.dhcp_token);

  ON THE OTHER

  While l_cmts_add IS NOT NULL

  LOOP

  l_add_link_nm: = r.dhcp_token |' _TO_' | l_cmts_add;

  SELECT COUNT (1)

  IN l_cmts_cnt

  OF subntwk

  WHERE subntwk_nm = TRIM (l_cmts_add);

  SELECT COUNT (1)

  IN l_link_cnt

  LINK

  WHERE link_nm = l_add_link_nm;

  IF l_cmts_cnt > 0 AND l_link_cnt = 0 THEN

  INSERT INTO link (link_nm)

  VALUES (l_add_link_nm);

  DBMS_OUTPUT. Put_line (l_add_link_nm |) » '||' Has been added. ") ;

  ELSIF l_link_cnt > 0 THEN

  DBMS_OUTPUT. Put_line (' link is already present: ' | l_add_link_nm);

  ELSIF l_cmts_cnt = 0 then

  DBMS_OUTPUT. Put_line (' no. CMTS FOUND for device to create the link: ' | l_cmts_add);

  END IF;

  l_cmts_1: = TRIM (SUBSTR (l_cmts_1, INSTR (l_cmts_1, ',') + 1));

  l_cmts_add: = TRIM (SUBSTR (l_cmts_1, 1, INSTR (l_cmts_1, ',') - 1));

  END LOOP;

  END IF;

  END LOOP;

  COMMIT;

  EXCEPTION

  WHILE OTHERS THEN

  Dbms_output.put_line ('ERROR' |) SQLERRM);

  END;

  /

  output

  control files -

  DOWNLOAD THE DATA

  INFILE 'cmts_data.csv '.

  ADD

  IN THE STG_CMTS_DATA TABLE

  When (cmts_token! = ") AND (cmts_token! = 'NULL') AND (cmts_token! = 'null')

  and (cmts_ip! = ") AND (cmts_ip! = 'NULL') AND (cmts_ip! = 'null')

  FIELDS TERMINATED BY ' |' SURROUNDED OF POSSIBLY "" "

  TRAILING NULLCOLS

  ('RTRIM (LTRIM (:cmts_token))' cmts_token,

  cmts_ip ' RTRIM (LTRIM(:cmts_ip)) ")". "

  for dhcp.

  
  

  DOWNLOAD THE DATA

  INFILE 'dhcp_data.csv '.

  ADD

  IN THE STG_DHCP_DATA TABLE

  When (dhcp_token! = ") AND (dhcp_token! = 'NULL') AND (dhcp_token! = 'null')

  and (dhcp_ip! = ") AND (dhcp_ip! = 'NULL') AND (dhcp_ip! = 'null')

  FIELDS TERMINATED BY ' |' SURROUNDED OF POSSIBLY "" "

  TRAILING NULLCOLS

  ('RTRIM (LTRIM (:dhcp_token))' dhcp_token,

  dhcp_ip ' RTRIM (LTRIM(:dhcp_ip)) ")". "

  for link -.

  DOWNLOAD THE DATA

  INFILE 'link_data.csv '.

  ADD

  IN THE STG_LINK_DATA TABLE

  When (dhcp_token! = ") AND (dhcp_token! = 'NULL') AND (dhcp_token! = 'null')

  and (cmts_to_add! = ") AND (cmts_to_add! = 'NULL') AND (cmts_to_add! = 'null')

  FIELDS TERMINATED BY ' |' SURROUNDED OF POSSIBLY "" "

  TRAILING NULLCOLS

  ('RTRIM (LTRIM (:dhcp_token))' dhcp_token,

  cmts_to_add TANK (4000) RTRIM (LTRIM(:cmts_to_add)) ")" ""

  SHELL SCRIPT-

  If [!-d / log]

  then

  Mkdir log

  FI

  If [!-d / finished]

  then

  mkdir makes

  FI

  If [!-d / bad]

  then

  bad mkdir

  FI

  nohup time sqlldr username/password@SID CONTROL = load_cmts_data.ctl LOG = log/ldr_cmts_data.log = log/ldr_cmts_data.bad DISCARD log/ldr_cmts_data.reject ERRORS = BAD = 100000 LIVE = TRUE PARALLEL = TRUE &

  nohup time username/password@SID @load_cmts.sql

  nohup time sqlldr username/password@SID CONTROL = load_dhcp_data.ctl LOG = log/ldr_dhcp_data.log = log/ldr_dhcp_data.bad DISCARD log/ldr_dhcp_data.reject ERRORS = BAD = 100000 LIVE = TRUE PARALLEL = TRUE &

  time nohup sqlplus username/password@SID @load_dhcp.sql

  nohup time sqlldr username/password@SID CONTROL = load_link_data.ctl LOG = log/ldr_link_data.log = log/ldr_link_data.bad DISCARD log/ldr_link_data.reject ERRORS = BAD = 100000 LIVE = TRUE PARALLEL = TRUE &

  time nohup sqlplus username/password@SID @load_link.sql

  MV *.log. / log

  If the problem I encounter is here for loading data in the link table that I check if DHCP is present in the subntwk table, then continue to another mistake of the newspaper. If CMTS then left create link to another error in the newspaper.

  Now that we can here multiple CMTS are associated with unique DHCP.

  So here in the table links to create the link, but for the last iteration of the loop, where I get separated by commas separate CMTS table stg_link_data it gives me log as not found CMTS.

  for example

  DHCP-1-1-1. WNLB-CMTS-01-1,WNLB-CMTS-02-2

  Here, I guess to link the dhcp-1-1-1 with balancing-CMTS-01-1 and wnlb-CMTS-02-2

  Theses all the data present in the subntwk table, but still it gives me journal wnlb-CMTS-02-2 could not be FOUND, but we have already loaded into the subntwk table.

  same thing is happening with all the CMTS table stg_link_data who are in the last (I think here you got what I'm trying to explain).

  But when I run the SQL scripts in the SQL Developer separately then it inserts all valid links in the table of links.

  Here, she should create 9 lines in the table of links, whereas now he creates only 5 rows.

  I use COMMIT in my script also but it only does not help me.

  Run these scripts in your machine let me know if you also get the same behavior I get.

  and please give me a solution I tried many thing from yesterday, but it's always the same.

  It is the table of link log

  link is already present: dhcp-1-1-1_TO_wnlb-cmts-01-1

  NOT FOUND CMTS for device to create the link: wnlb-CMTS-02-2

  link is already present: dhcp-1-1-2_TO_wnlb-cmts-03-3
  link is already present: dhcp-1-1-2_TO_wnlb-cmts-04-4

  NOT FOUND CMTS for device to create the link: wnlb-CMTS-05-5

  NOT FOUND CMTS for device to create the link: wnlb-CMTS-01-1

  NOT FOUND CMTS for device to create the link: wnlb-CMTS-05-8
  NOT FOUND CMTS for device to create the link: wnlb-CMTS-05-6
  NOT FOUND CMTS for device to create the link: wnlb-CMTS-05-0

  NOT FOUND CMTS for device to create the link: wnlb-CMTS-03-3

  link is already present: dhcp-1-1-5_TO_wnlb-cmts-02-2
  link is already present: dhcp-1-1-5_TO_wnlb-cmts-04-4

  NOT FOUND CMTS for device to create the link: wnlb-CMTS-05-7

  Device not found: wnlb-dhcp-1-13

  IF NEED MORE INFORMATION PLEASE LET ME KNOW

  Thank you

  I felt later in the night that during the loading in the staging table using UNIX machine he created the new line for each line. That is why the last CMTS is not found, for this I use the UNIX 2 BACK conversion and it starts to work perfectly.

  It was the dos2unix error!

  Thank you all for your interest and I may learn new things, as I have almost 10 months of experience in (PLSQL, SQL)

• Building xml in oracle without unnecessary tags using sql

  I wanted to build XML in oracle using sql, I found a way to construction using sql functions after a little research, I am completely unaware of any XML. My query is

  
  

  SELECT XMLELEMENT("orderwave",
  XMLAGG(XMLELEMENT("order_header",
   -- XMLATTRIBUTES(t2.l_name AS "order_number"),
  XMLFOREST(
  nvl(t2.l_name,' ') as "order_number",
   (
  SELECT XMLAGG(XMLELEMENT("order_line",
  XMLFOREST( nvl(t1.l_name,' ') AS "label_type",
  nvl(t1.l_num,0) AS "lpn",
  nvl(t1.l_num,0) AS "sku"
   )
   )
   ) 
  FROM test_table t1
  WHERE UPPER(t1.record_type)='D'  
   ) AS sap
   )
   )
   )
   ) AS HEADER
  FROM test_table t2
  WHERE UPPER(t2.record_type) ='H';

  
  

  My problem is for using xmlforest, I had to use alias name 'sap' in my query to work and to get xml output. If i am using that, I am getting an unwanted tag 'SAP' around my data which I have to later cut it, which is unacceptable. Is there a way I can get rid of this extra 'SAP' tag without having to cut. The output data is

  
  

  <orderwave>
   <order_header>
   <order_number>order1</order_number>
   <SAP>
   <order_line>
   <label_type>test1</label_type>
   <lpn>1</lpn>
   <sku>1</sku>
   </order_line>
   <order_line>
   <label_type>test2</label_type>
   <lpn>2</lpn>
   <sku>2</sku>
   </order_line>
   <order_line>
   <label_type />
   <lpn>0</lpn>
   <sku>0</sku>
   </order_line>
   </SAP>
   </order_header>
   <order_header>
   <order_number>order2</order_number>
   <SAP>
   <order_line>
   <label_type>test1</label_type>
   <lpn>1</lpn>
   <sku>1</sku>
   </order_line>
   <order_line>
   <label_type>test2</label_type>
   <lpn>2</lpn>
   <sku>2</sku>
   </order_line>
   <order_line>
   <label_type />
   <lpn>0</lpn>
   <sku>0</sku>
   </order_line>
   </SAP>
   </order_header>
</orderwave>

  


    Any help is really appreciated and thanks in advance.

  -- sample data
  with test_table
  as
  (
      select 'H' record_type, 'order1' l_name, 0 l_num from dual
      union all
      select 'H' record_type, 'order2' l_name, 0 l_num from dual
      union all
      select 'D' record_type, 'test1'  l_name, 1 l_num from dual
      union all
      select 'D' record_type, 'test2'  l_name, 2 l_num from dual
  )
  -- end of sample data
  select xmlelement
         (
            "order_wave"
          , xmlagg
            (
              xmlelement
              (
                  "order_header"
                , xmlelement("order_number", t1.l_name)
                , xmlagg
                  (
                    xmlelement
                    (
                       "order_line"
                     , xmlelement("label_type", t2.l_name)
                     , xmlelement("lpn", t2.l_num)
                     , xmlelement("sku", t2.l_num)
                    )
                  )
              )
            )
         ) xml_data
    from test_table t1
   cross
    join test_table t2
   where t1.record_type = 'H'
     and t2.record_type = 'D'
   group
      by t1.l_name;
  
  -- output
  /*
  
          
                  order1
                  
                          test1
                          1
                          1
                  
                  
                          test2
                          2
                          2
                  
          
          
                  order2
                  
                          test1
                          1
                          1
                  
                  
                          test2
                          2
                          2
                  
          
  
  */
  

• How to get the full DDL using SQL developer

  Hi all

  I need get the full DDL a table with the details of the index partitions, synonyms, comments (if any) and give information if given any role, use SQL developer. We can achieve the same thing using shortcut F4 on name of the table into a frog, then selecting tab DDL. Is it possible to get the same in SQL Developer also?

  
  

  Also how I see existing procedures using SQL developer?  A toad, we were able to achieve using the schema browser.
  

  Hi all

  I reached by - right click on connection - diagram open... and any browser will even...

• To use SQL Developer 4.0.1 (4.0.1.14.48) on the operation of Win7 32-bit; but no JDK provided with the 32-bit download?

  For some reason, my IT Department installed a 32-bit Win7 on a laptop capable of 64-bit (HP ProBook 6460 b).

  I want to download and use SQL Developer 4.0.1 but see there is no 32 - bit download of it delivered with a suitable JDK.

  What are my options here

  (1) anyone can provide a download link for the appropriate JDK, and then what I do with it? I can place it in the same folder as the SQL Developer? I don't have administrative rights on my laptop by the way...

  (2) can I ask my IT dept to reimage my machine with Win7 64 bit rather than the 32-bit Win7?

  Here are the specifications of my laptop. Because it seems to be able to address up to 16 GB of RAM, I suspect 32 bit Win7 was installed as the laptop has only 4G of RAM in it. And without having to address more than 4 GB of RAM, it was perhaps the deciding factor to install a 32-bit version on Win7. Frankly, had not realized, he had nothing, but a 64 bit version of Windows 7:

  What is the least disruptive option / path of least resistance here?

  http://h10010.www1.HP.com/wwpc/pscmisc/VAC/us/product_pdfs/HP_ProBook_6460b_Notebook_PC_Datasheet.PDF

  You must inform your IT Department, you want a 64 bit OS.

  Then tell them you want to double your RAM.

  Trust me on this one.

  If they say no, then ask them to install Java 32 bit 7 on your machine, and you'll be ready to go.

• Problem with migration SQL Server Oracle 11.2 2012 DB using SQL Developer Migration workbench

  Hello

  I have a problem when migrating SQL Server Oracle 11.2 2012 using SQL Developer Migration workbench, hope that someone had the same problem before and can give same advide...

  I use SQL Developer Version 4.0.1.14 and Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0. and last jtds - 1.3.

  I created the schema migration_repo, privileges, connected to the third part of Db (SQL Server) and begin a trial with assistant. In the first step of the model to Capture, I get the message from the:

  "Company Capture Capture failed.  Refer to the table MIGRLOG in the repository for more details ".

  But MIGRLOG is empty.

  Here is my log:

  <? XML version = "1.0" encoding = "windows-1252" standalone = 'no '? >

  < Log >

  account <>

  < date > 2014-03-16T 20: 49:17 < / date >

  oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle < recorder > < / recorder >

  < level > SEVERE < / level >

  oracle.dbtools.migration.workbench.core.logging.MigrationLogUtil < class > < / class >

  < message > Capture

  Capture Enterprise

  Capture failure.  Refer to the MIGRLOG table in the repository for more details < / message >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doOnlineEnterpriseCapture(FullMigrateTask.java:758) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doCapture(FullMigrateTask.java:601) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doMaskBasedActions(FullMigrateTask.java:400) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:314) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:147) < param > < / param >

  oracle.dbtools.raptor.backgroundTask.RaptorTask.call(RaptorTask.java:193) < param > < / param >

  java.util.concurrent.FutureTask.run(FutureTask.java:262) < param > < / param >

  oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$ (RaptorTaskManager.java:554) < param > RaptorFutureTask.run < / param >

  java.util.concurrent.Executors$ (Executors.java:471) < param > RunnableAdapter.call < / param >

  java.util.concurrent.FutureTask.run(FutureTask.java:262) < param > < / param >

  java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145) < param > < / param >

  java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:615) < param > < / param >

  java.lang.Thread.run(Thread.java:744) < param > < / param >

  oracle.dbtools.migration.workbench.core.logging.LogInfo@68e69a < param > < / param >

  < exception >

  < message > oracle.dbtools.migration.workbench.core.ui.FullMigrateTask$ FullMigrateTaskException: Capture

  Capture Enterprise

  Capture failure.  Refer to the MIGRLOG table in the repository for more details < / message >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 758 < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 601 < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  line 400 > of < < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 314 < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 147 < / line >

  < / framework >

  < frame >

  oracle.dbtools.raptor.backgroundTask.RaptorTask < class > < / class >

  < line > 193 < / line >

  < / framework >

  < frame >

  java.util.concurrent.FutureTask < class > < / class >

  < line > 262 < / line >

  < / framework >

  < frame >

  oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$ RaptorFutureTask < class > < / class >

  < line > 554 < / line >

  < / framework >

  < frame >

  java.util.concurrent.Executors$ RunnableAdapter < class > < / class >

  < line > 471 < / line >

  < / framework >

  < frame >

  java.util.concurrent.FutureTask < class > < / class >

  < line > 262 < / line >

  < / framework >

  < frame >

  java.util.concurrent.ThreadPoolExecutor < class > < / class >

  < line > 1145 < / line >

  < / framework >

  < frame >

  java.util.concurrent.ThreadPoolExecutor$ Worker < class > < / class >

  < line > 615 < / line >

  < / framework >

  < frame >

  java.lang.Thread < class > < / class >

  < line > 744 < / line >

  < / framework >

  < / exception >

  < / recording >

  account <>

  < date > 2014-03-16T 20: 49:17 < / date >

  oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle < recorder > < / recorder >

  WARNING < level > < / level >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  <>error message: ORA-06550: line 1, column 14:

  PLS-00201: identifier ' SS2K5ALLPLATFORM. STAGECAPTURE' must be declared

  ORA-06550: line 1, column 7:

  PL/SQL: Statement ignored

  : FAILED: Database Migration: FAILURE < / message >

  oracle.dbtools.migration.workbench.core.logging.LogInfo@1e2c9b99 < param > < / param >

  < / recording >

  I try with model db (DB empty, just a single table), but the error is same. However, if I try to copy the acronym tabele from SQL Server to Oracle it works fine...

  I guess it's something with the configuration, but beacause I am new in Oracle still have no idea...

  Any help would be much appreciated

  I thank in advance

  Stefan

  Hello Stefan,

  did you create the repository Migration of your database to Oracle (Tools-> Migration-> repository management)?

  The SS2K5ALLPLATFORM package is usually created when you add the migration of the Oracle database repository and it contains the function StageCapture.

  So please make sure that you have created a repository of migration in an Oracle database and associate it with the first step of your migration.

  -Klaus

• MySQL-&gt; table using SQL Developer Oracle

  Greetings,

  Currently, I am a (student) temporary employee who is responsible for the migration of the MySQL database of a company to their new (gr 11, 2) Oracle database.

  So far, I use SQL Developer, because I learned a few minor techniques with this application.

  I have tried different methods for the migration, including those of the Oracle (Migration of MySQL) page

  I however got no positive results with most of the methods.

  -J' have established a connection to the MySQL database Oracle database aswell, within SQL Developer

  Now, so far, I've copied manually (right click on the table, copy to Oracle) 90% of the tables from the MySQL to Oracle database successfully.

  However, these tables contain only about 5% of the data. The problem is in the 2 tables that actually have a decent amount of records.

  FOR INFO:

  File 1: 75MB file .csv, ~150.000 records (individual records contain all select queries, where the size)

  File 02:50 MB of files .csv, ~2.200.000 records

  My previous attempts to use the same copy for Oracle option to right click on one of the two largest tables resulted in the following error:

  The table of queries down. Message: java.io.IOException: IO error: socket read timed out

  My first action to prevent this error has been to add a second file data to the current storage space, giving it 200M maxsize.

  Okay it's coming, my real questions!

  This could be a possible solution to avoid the error mentioned earlier to return?

  What other issues are possible in case of failure?

  Uses an external table to a faster and more effective method?

  (The reason for which I have not yet tried external tables is because I had no SYS (TEM) privileges, so anything that requires privileges, I first have to discuss with my superior).

  Any help is appreciated! Although my next answer is maybe not earlier that come Monday 17.

  Welcome, Brent

  Hello

  I just discovered there is a csv Import Wizard in sqldeveloper also - don't know if you tried?

  tables in the destination database (oracle) - right-click and choose Import data - this will bring you in a Wizard of csv.

  However, I think that due to the volumes of data it may have similar problems.

  sqlldr is probably your best choice - it's pretty simple once you find a decent example - it seems to cover the basics of ok - Oracle SQL Stuff (for example): SQL-Loader: the tutorial step by step - example 1 (CSV file)

  See you soon,.

  Rich

• Error loading data using SQL loader

  I get an error message like "SQL * Loader - 350 combination illegal syntax of non-alphanumeriques characters error during loading of a file using SQL loader in RHEL." The command used to run SQL * Loader is:

  Sqlldr userid = < user name > / < password > control = data.ctl

  The control file is data.ctl:

  DOWNLOAD the data

  INFILE ' / home/oraprod/data.txt'

  Add in the table test

  {

  EmpID completed by «,»,

  fname completed by «,»,

  lname completed by «,»,

  treatment is completed with a white space

  }

  The data.txt file is:

  1, Kaushal, Hamad, 5000

  2, Chetan, Hamad, 1000

  Hopefully, my question is clear.

  Please get back with the answer to my query.

  Concerning

  Replace "{" by "("dans votre fichier de contrôle) "

  DOWNLOAD the data

  INFILE 'c:\data.txt.

  Add the emp_t table

  (

  EmpID completed by «,»,

  fname completed by «,»,

  lname completed by «,»,

  treatment is completed with a white space

  )

  C:\>sqlldr user/pwd@database control = c.ctl

  SQL * Loader: release 10.2.0.3.0 - Production on Wed Nov 13 10:10:24 2013

  Copyright (c) 1982, 2005, Oracle.  All rights reserved.

  Commit the point reached - the number of logical records 1

  Commit the point reached - the number of logical records 2

  SQL > select * from emp_t;

  EMPID, FNAME LNAME SALARY

  ---------- -------------------- -------------------- ----------

  1 kone hamadi 5000

  2 Chetan Hamad 1000

  Best regards

  Mohamed Houri

• Demonstrating the PL/SQL using SQL Developer functions

  Good afternoon

  I started writing some PL/SQL functions to replace some of the SQL I use most often.  Some very simple examples would be:

  create or replace function func_test (p_1 number) return number
  
  is
  
  x number;
  y number;
  
  begin
  
  
  x :=1;
  y :=2;
  
  
  return p_1 * x * y;
  
  
  end func_test;
  
  

  create or replace function func_test2 (p_1 varchar2) return varchar2
  
  
  is
  
  
  return_val varchar2(10);
  
  
  begin
  
  
  select p_1 into return_val from dual;
  
  
  return return_val;
  
  
  end func_test2;
  

  However, on my place of work that I have not been granted created function privileges again until I can show some examples, which is understandable.

  For the moment, without these privileges, is there a way I can build/test functions in principle locally using SQL Developer without the need to write functions in our database? I.e. can demonstrate meanings in SQL Developer, but devoid of envelope to create or syntax of replace?

  I hope that's not too vague.

  Using Oracle 11 g 2 (not connected to the database of the workplace at this time for a specific version not.)

  3.4 SQL Developer

  Thank you

  TP

  Hello

  The obvious solution is to get privileges.  If your employer wants to do you something, they give you the necessary privileges to do so.  It's silly for them to tell you to do something, but refuses to let you do.

  Otherwise, you can install Oracle on your own machine, as suggested above.  It's free and legitimate, if you only use it for learning and development.  Oracle Express Edition is very easy to install.

  As a last resort, you can write functions and procedures that are local to an anonymous block, like this:

  SET SERVEROUTPUT ON

  DECLARE
  Function func_test (p_1 number) return number
  is
  x number;
  number of y;
  Start
  x: = 1;
  y: = 2;
  return p_1 * x y;
  end func_test;
  BEGIN
  dbms_output.put_line (func_test (3))
  || '= func_test results.
  );
  END;
  /

  You can only call this kind of function of the anonymous block in which it is defined.