HP 8500 first dead

Similar Questions

• The yellow cartridge leaves print on my Officejet 8500 first printer - error line failure

  Middle yellow document pali and ceased print on my Officejet printer 8500 first. The ink cartridge is full and I tried a new cartridge. I tried to clean the print heads with no result. When I tried to align the print heads I have an error message "align the failure." There is no change of any kind.

  I had previously tried everything listed in the proposed link without result. I replaced the printhead and it solved the problem.

• HP OfficeJet Pro 8500 first print and mirror for treadmill mouse and t shirt

  HP OfficeJet Pro 8500 first concerns.  I tried to figure out where the printer setting is for printing in mirror.  It is usually in the Advanced Settings tab.  I called HP and was told by 2 different tech, then supervisor that HP does not include this option in this printer.  I tried to explain how I felt it was hard to believe and I was told that it is most likely was an option that was no longer necessary.  I have his name and the file number.  I asked this bump up the level immediately above, because I felt strongly HP has not intentionaly left this option.  I digress.

  Can anyone suggest anything.

  Thank you

  Joe

  Thank you all

  Got it to work.

  990 has not worked, 5600 had mirror but does not print correctly.

  I went to the HP site and downloaded different drivers until I could get to work.

  Thanks again

  Joe

• HP Officejet Pro 8500 first: Feeder does not

  Hello:

  I use a HP Officejet Pro 8500 first all-in-one printer, and recently I started having problems with the document feeder. It always saves when a document is sitting there, but when I choose "Scan" it makes a really loud grinding noise, short and says that I need to reload the document, and then try again. I also noticed that the roller is demeaning not himself, he is already lowered when I place documents in now. I think that maybe that's the problem.

  I also have the error 'Pump motor Stall' when I restart the device.

  No idea how can I fix? I scan a large number of documents in the office and the document feeder is quite crucial for time management.

  Thank you!

  Hello @ddehner523and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have questions about your feed paper.  I would like to help!

  I recommend to remove printer ink cartridges and reset the power supply.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I would also turn on the power of the printer into a different wall outlet.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP Office Pro 8500 first and Mac OS Lion. Software problem

  I have a HP Office Pro 8500 first and recently, I upgraded my Mac OS Lion. Now the printer is not recognized by my Mac OS Lion. I understand there are required HP upgrade. Please notify.

  We will restore the printing system

  -Sys Prefs, print Fa
  -Right (control) click inside the box that lists your printers and select Reset Printing System
  WARNING - This will remove ALL your printers
  -Select the sign + to add again. Search for the printer, select it, and wait for the theAd element button becomes available. Click it

• HP Officejet Pro 8500 first: Printers that HP Business will scan for OneDrive (SkyDrive)?

  Hello:

  The first part of this isn't really the problem, it's just to explain why we are looking for a replacement for this printer.

  Our office is currently using an HP all-in-one Officejet 8500 Pro Premier Series. The charger only really works when he wants (regardless of the resolution of the problems) and we arrived recently on an error message "pump" engine to a standstill at startup (which does not seem to impact, printing, scanning or copying that much). However, our new issue is one that many other experience with this particular model, and it's cyan not print do not at all. I cleaned the heads and blue printing, still does not want to show everyone. Yes, the cartridges are full; No, we don't want to pay $70 to replace part of the printer, when it has enough problems as it is.

  Now, we are looking for a new printer, and my controller wishes to be a brand of HP or a Brother brand printer. We still want an all-in-one, which a lot of HP, however, I need to know which ones will scan actually OneDrive cloud service. I see on e-print and other stuff, but I have no idea what this is. We want just to make sure that our scanner will be useful to our business, and we do a lot of scan-to-OneDrive, but it's a lot of time when the charger does not work all the time.

  You have any suggestions for HP printers? Do you know what models or do not Scan-to-Cloud services offer? I had a very difficult time trying to find one who has had this in the description and specifications.

  Thank you!

  EDIT: Sorry, I had to fix the title to 'scan' instead of 'print '.

  Hello

  Scan to OneDrive is much easier, just set up your printer (any web connected printer) or normal so that your computer is connected to scan to a location (Destination). For Windows 8.1, new printer can take OneDrive during the installation process.

  

  You can see on the image above, I did a test before the answer of your question (previous answer - print for OneDrive).

  Kind regards.

• OfficeJet Pro 8500 first, working to the new router. Menu locked up now, wireless

  Printer is HP73053C (Office Jet Pro 8500 A909n first) converted from DSL to cable modem.  Now wireless cannot find printer and lost top buttons (Tools, ink level and help) features.  Windows 7 pro 64-bit.  HP support intervened during the WEB search and told me I was out of warranty for them to help me.  Reconnected printer on USB, reinstalled the drivers, (OJP8500VA909_Full_14.exe) thin printer on USB but still can not find way to unlock lock-up wireless.  Still no access tools, ink (try to get to the wireless configuration) or menus help, no answer on the softscreen buttons.

  Please, can anyone help?  Is it possible to perform a "hard reset" on the printer?

  OK, you can try a reset more mild # and 6 keys.

  If this does not work, can you get it to a stable State where you can load the firmware update?

• OfficeJet Pro 8500 first wired referee

  I have a first OfficeJet Pro 8500 all-in-in-one installed on a home network. It is wired ethernet to a Linksys router. I have two computers on the network - a running XP and a Windows 7. Solution Center works very well from the XP computer. On the Windows 7 computer, I just downloaded and installed the latest version of the software from the HP website. I can print to it and he ping the computer 7, but the center of Solution does not work. When I try to open the solution Center, I get the following error message: "HP Solution Center cannot work because your installation of the device is not complete." I have downloaded and run HP Print and Scan doctor, and we found no problem. I hope someone can help. Thank you.

  JP

  Hi jpilegg,

  The message indicates that the installation has failed to complete.

  Please download the uninstall utility and remove the whole driver using level 4.  There are instruction download page.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-98744-3&cc=US&DLC=en&LC=en&os=4063&Product=3752462&sw_lang=

• OfficeJet Pro 8500 first stopped scanning

  My Officejet Pro 8500 has stopped scanning.  The message window says it is not connected to the network.

  I changed my DSL provided by the local cable company to ATT U verse a few months ago, but the problem does not seem to be related to this change.  I say this because when I ran the diagnostics, the printed page says that my problem is "the wireless radio does not work. Contact HP support. »

  HP support offered advice tech for $29) warranty, or sell me a new all-in-one.

  The wireless radio can be fixed? Is it a software problem.  I have to buy a new all-in-one?

  Hello JessicaD,

  I see that you have a problem with the wireless radio fails on your Officejet 8500. To inform you in this regard, if the radio has failed, it is not a replaceable part by customer, but I'll try to help you with the problem.

  Start as a result of this document: printer does not maintain the wireless connection.
  With this document, I would like to track:
  (1) restore your default settings of network on the printer.
  Go to setup (can be a wrench), network, and then restore the default settings of the network. After that the power on the printer.

  (2) turn off the wireless radio.
  Go to Configuration > network > wireless radio, you must have the option to turn it off.

  (3) hard reset of the printer.
  While the printer power cable for 30 seconds, while the cable is unplugged, press and hold the power button for 15 seconds. It's draining the printer of all power. Reconnect the cable.

  (4) turn on the wireless radio and reconnect.
  Go to Configuration > network > wireless radio - on. Then, go to Configuration > network > wireless are running the configuration wizard.

  If it was not successful in entering you connected to the network and or print wireless. You still have another option with the printer to try before replacing.
  If you have an Ethernet cable, you can set a wired network connection. Plug the Ethernet (cat5 cable) cable into the printer and the router. It will be assigned the printer a new IP, which means that you will need to add the printer to the computer. This will still allow the printer on the network and communicate with a wireless device.

  Please try all above and I would like to know how everything goes. Thanks for posting on the HP Forums.

• OEM Windows 7 installation on another computer after the first dead

  I recently bought a laptop computer without an operating system, and the seller I sold separately an OEM Windows 7 Professional version. I installed and activated this version of Windows. I must return this laptop because I was not satisfied with it. The seller will refund me the price of the laptop, but not Windows. Can I use this version of Windows, or do I have to just eat the cost?

  OEM cannot be moved to a new computer. You will need to buy another copy to install Windows on another computer.

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  Can move you to a new Windows 7 computer

  If it's a full license or upgrade retail - Yes. You can move it to another computer as long as it is installed on a single computer at a time (and if it's a Windows 7 Upgrade version the new computer must have its own XP/Vista license qualification). The previous installation of Windows 7 on the old computer must be formatted or deleted. You will have to perhaps call Microsoft and explain what happened to complete activation. Turning it on the second computer will automatically be in effect 'disable' the license for the first computer. The key works with 32 and 64 bit, but can only be installed at a time.

  If it's an OEM license - don't. OEM licenses, including Windows preinstalled on a computer before purchase and Windows purchased separately, are related to the first computer, they are installed on and cannot be transferred to another computer. To install Windows on another computer, you will need to buy another copy.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• must my HP Officejet Pro 8500 first select correct tray based on the size of the documents

  The Prime Minister has 8500, two bins for paper, one for 8.5 x 11 and the default tray handles 8.5 x 14.

  I need to change the printer settings to get it to use the correct paper tray whenever I want to use 8.5 x 14.

  There is a configuration that allows the printer to select the correct tray according to the size of the document sent to the printer?

  OK, unfortunately the printer will do that automatically. However, if you go into your printing preferences, you can configure a print shortcut that makes switching back MUCH easier. If you need help on how to do that let me know.

  I hope this helps!

• HP 8500 first: Printer is low on ink message - but I just replaced the magenta cartridge with a new one.

  When I click on the icon of supply levels it shows magenta is 100%, but beneatht the screen, it says "the following ink cartridges are low on ink: Magenta.  How do I overcome this?

  Hi igloodweller,

  There are some possible solutions to this problem, including performing a hard reset, clean the contacts of the cartridge and the firmware update.

  This guide covers all of these solutions, and it offers also some details on the maintenance of the printer with HP if they do not resolve your problem. LINK

• HP Officejet Pro 8500 first Scan to E-mail Setup

  I would like to know if someone has been able to get this option to work and if so it only works for a mail SMTP server or can set you it to an HTTP e-mail server IE; Windows Live Mail.  Any input would be greatly appreciated.  Thank you.

  GEORGE!  I thought about it.  For those who want to define this feature using Windows Live Mail and who use Qwest and hotmail, here is a link to discover this little bit of info I was looking so hard for.  http://www.Qwest.com/InternetHelp/QA/email/pop_smtp_qa.html use the name of the outgoing server and instructions including activation of SSL, require authentication, etc.  Use your complete username i.e. [email protected] and password for authentication.  Hopefully this might help someone else in the future and thank you for your help.

• HP OFFICEJET PRO 8500 FIRST

  THE PERSON WHO INSTALLED MY COMPUTER INSTALLED MY PRINTER/FAX.  HE HAS NOT USED THE DISC THAT COMES WITH IT.  I NEED TO KNOW IF I PUT THE INSTALLATION DISC IN WILL IT ERASE EVERYTHING THAT IS NOW RUNNING NOW OR DO ANY STATE OF LEGIBILITY.  I NEED TO BE ABLE TO ACCESS THE HISTORY OF FAXES I SENT AND HAVE NO WAY TO DO IT.  CAN SOMEONE HELP WITH THIS KIND OF PROBLEM?  Thank you very much

  No, it will not WIPE anything. If you have already the FULL FEATURES of software and downloaded drivers, it is not necessary for the drive. It's the same thing. Is nothing useful on the drive, unless you happen to have a computer problem and your computer deletes the printer drivers. You can then use the disk to re - download the software.

• OfficeJet Pro 8500 first - how I can print without color cartridges?

  Despite a set up preferably default in 'Black and white' print only, to avoid misuse of color ink, color ink cartridges are running out constantly and then the printer will not print.  I have same need print in color, I just wanted to the all-in-one functionality.  Does anyone know how I can print just without color cartridges?  I'm happy to remove them and finish with color.  Help!

  Hello

  I'm afraid that cannot be done, as a device color-all-in-one color ink is required and used.

  You can use black ink only redce using ink and do not use it for printing, however the color cartridge will BE used during the maintnace of tasks such as cleaning the print head and of alignment.

  You can find more info on the use of ink that are explained in the section "some color ink may be used when printing graphics or black text" below:

  http://h10060.www1.HP.com/pageyield/en-150/articles/howInkIsUsed.html?cCode=us

  Shlomi