Calculation of the costs rail tab disabled

Similar Questions

• Calculation of the costs of the project will allow GST inventory for purchase order

  I have a module for the calculation of project costs and a project is created

  I can add the cost of the inventory to the project?

  Yes you can create movements of stock as long as your tasks are charged.

  FYI, you can start using project - EBS (MOSC) that is the community of MOS and have more users so give you faster responses and more general public.

  Thank you

  Gene

• Calculation of the cost of a product in stores using OPA

  Hello
  
  I worked on POC which must come back together to store names and lower cost for the list of products available in different stores. I m the following challenges in development.
  
  1. How do I return the names of several stores in OPA since an attribute retains a unique value.
  2. calculation of lower cost according to the availability in shops. How do this declaratively?
  3. how to design the entity model in the OPA.
  
  An example of the problem, it's an order for products A, B and C with each unit 1,2,2 quantities. Suppose P, Q, R, S and T of stores that offer products A, B and C. Each Bank maintains its own inventory/stock of each product. The challenge is to meet the demands of order according to the offered less cost as per a store with units available in the inventory of the product.
  
  It would be very useful if no response is validated from the beginning.

  If you try to send several stores, you will need to deduce a strictly ordered list (i.e. a single store is preferred, each subsequent store is the "next most favorite", etc.). A sorted list strictly require something unique to use as a "switch" when two or more stores have the same price. In general, an ID or other unique attribute is used.

  Directly to answer your question choose a store... the simplest approach is to make something similar given that policies and rules are supposed to be deterministic, selection "randomly" from a store would prove to be problematic in the long term (e.g. predictable test cases, etc.)

  Instead of using InstanceValueIf to identify the price the less expensive, use InstanceMinimum to get the lowest price, regardless of the number of stores have this award. To identify a single store, decide what attribute will be used as a switch (e.g. a digital ID attribute on the entity price would work in your case). You can then use conditions that are used to identify the price to use as one that has the minimum ID among those whose minimum price.

• Calculation of the costs of process execution results

  I am trying to view my costing process using view > payroll result process
  = Monthly salary payroll
  
  Action type = cost
  
  and I click on find I can see the date of costing in March 31, 2010. I then click on the process button and then I click on the employee that I want to display the details of costs and I click on the button of the costs
  Need me a screen where I enter the encrypted carry information IE should I select a date in the lov and then I click the detail section under the name of the item that I can display the employee details for each element and entry of debit and credit for each of the elements.
  
  Can someone tell me the name of the table to this form that I want to display using the select sql command.
  
  
  Appreciate all your help!

  Try this query...
  Select pet.element_name ' Element', 'Value' pc.costed_value, pc.debit_or_credit ' "debit / Credit", pc.balance_or_cost «Scale / Cost", ppa1.date_earned, paa1.assignment_id»»»
  from pay_costs
  pay_cost_allocation_keyflex pcak,
  pay_input_values_f piv,
  animal pay_element_types_f,
  pay_assignment_actions AAP,
  pay_payroll_actions App,
  Pai pay_action_interlocks,
  pay_assignment_actions paa1,
  pay_payroll_actions ppa1
  where pc.cost_allocation_keyflex_id = pcak.cost_allocation_keyflex_id
  and pc.assignment_action_id = paa.assignment_action_id
  and paa.payroll_action_id = ppa.payroll_action_id
  and pc.input_value_id = piv.input_value_id
  and piv. ELEMENT_TYPE_ID = pet.element_type_id
  and ppa.action_type = 'C '.
  and paa.assignment_action_id = pai.locking_action_id
  and pai.locked_action_id = paa1.assignment_action_id
  and paa1.payroll_action_id = ppa1.payroll_action_id
  and ppa1.action_type IN ('R', 'Q')
  and paa1.source_action_id IS NULL
  and paa1.assignment_id =: pAssignmentId
  and ppa1.date_earned =: update
  order by 1

• Standard reports - calculation of the costs of the project and project billing

  Someone at - it a document that they can share that lists the standard flow into establishing project costs and project billing, as well as descrptions.
  
  Thank you!

  Hello

  See project Fundamandals User Guide Page 459: http://download.oracle.com/docs/cd/B53825_08/current/acrobat/121pjfug.pdf

  Thank you
  Govind

• Stock Items on the work of the costing of the project

  Hello

  When my company uses project manufacturing with EAM.  When they build capital assets, they enter Oracle EAM and create work orders.  On work, without share capital or the description of the basic elements are entered.   On the PO, they have a destination type of the "workshop".    When received, there will be no any transaction mtl_material_transactions and if I understand correctly, they will not be collected cost and therefore do not appear in the calculation of the costs of the project.

  It is a problem that we need these fees to be transferred to the calculation of the cost of the project so that they can be assigned to an asset in the establishment costs of the project and eventually transferred to assets of the Oracle.

  Anyone has any suggestions on how to manage this?

  Thank you

  Scott

  I solved this problem and project costs will BE received interface PO in which distribution IN. had a destination type of the factory.

• Automatic calculation of the budgetary cost

  Hello
  
  In projects approved oracle budget cost can take hours and hourly resources the calculation of rates based on the employee's employment to manipulate himself to prepare the budget?
  
  Is it possible to Oracle project? If so, can any 1 help me on the process?
  
  Thanks in advance much n...

  Hello

  You may want to consider Project Management User Guide, there is a chapter on the budgeting and forecasting.
  This text says:
  You can set budgets and forecasts of projects Oracle to calculate the gross cost, ployez under the burden of costs and revenues for each line in your budget or forecast. Projects Oracle calculates the amounts based on the quantities and amounts that you enter and from the fee that you specify for the costs and income in your budget or the planned rate to plan the scheduling options...
  .
  Note the extended functionality described here is relevant if you enable financial plans and use HTML pages.
  If you use the budgeting forms you will enter the quantity, but need Extension customer Budget to calculate the cost of crude and loaded automatically. You need to develop for these calculations in the extension code.

  Dina

• How can I disable the Switch-to-Tab function? -I need to open multiple tabs in the same place...

  I need to keep several versions of the same site opened at the same time, and then switch between them... Apparently the Switch-to-Tab function will not allow this and keep my duplicated tabs become other Web pages...

  You can turn it off by using the switch to tab no Add on more - https://addons.mozilla.org/firefox/addon/switch-to-tab-no-more

• How Oracle calclutes the cost for table analysis with non-voltage costs CPU.

  If the CPU costing are disabled and the column of blocks shown 1000 for a table in the user_tables and DB a DB_BLOCK_SIXE = 8KB and DB_FILE_MULTIBLOCK_READ_COUNT = 8.
  
  What will be the cost of a complete analysis of the table? How it will be calculated.

  user445775 wrote:
  Thanks Randolf,

  Infact I'm reading the same book and I was confused with the "adjusted" way MBRC is calculated?
  is it remain static in the database if I don't change MBRC? If not what are the factors can change the MBRC "adjusted".

  I recommend to download the code repository and run the script 'calc_mbrc.sql '. For each MBRC, it will show you the corresponding MBRC "amended". This looks like an adjustment factor "coded", static, built-in that simply depends on the defined MBRC, so for example if you use MBRC = 16, 10.40 is used as MBRC "adjusted", if you use a 64 MBRC a MBRC "adjusted" 25,84 will be used for the calculation (note how the largest EEG MBRCs and a more pessimistic "adjusted" value) etc.

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• When the tabs are open the random icon tabs go funky (varies)

  the icons in tabs that are related to different Web sites go funky (fluctuate randomly). It does'nt seem to matter how much is open.
  It's hard to describe, but it seems that the icon multiplies itself and block the verbage in the tab. It seems back to normal if clicking on a different tab.

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Have just updated of FF37 to FF38. The value default tabs - file, help, etc., is no longer open properly. Advice, please?

  When I click on the 'Help' tab, all I get is a partial outline of the drop - usually the bottom and one side. I had once a text, but no plan the menu. With this exception, attempt to use the DDMs provide no text - by clicking on the area where appears 'Options' is useless, and clicking on the tab 'Edit' to copy stuff does nothing either.

  I have dozens of tabs open in FF and they work perfectly well - the problem is with File, Edit, View, history, Favorites, tools, and help.

  Previous versions of FF were sometimes slow let the DDMs appears, but it's the first time, none of them have worked at all.

  Could you try disabling the use of Firefox hardware acceleration:

  "3-bar" menu button (or tools) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  This takes effect the next time you exit Firefox and start it again. Any difference?

• How can I solve this problem of 'Two versions of Adobe', then only the most recent version remains activated, the old version remains DISABLED, and/or uninstall the old version?

  I went to my addons tab, and I have, in fact, have two versions of shockwave flash, a 11.9... version and a 13.9, which, if I'm not wrong, is the latest version. There is a 'request to activate, activate always, never activate' button for EACH module. I clicked on never turn on the old version and the closed tab. I then tried to play a video on the Web. He would not play, I tried another site with the same result, so I went back to my tab add-on, and the button for the old version had changed again to "always enable" in itself. He continues to repeat this, and WILL NOT stay on "never activate. Whenever I return to the page complementary modules, THE NEW VERSION IS DISABLED, SO THAT THE OLD ONE. I tried to uninstall the old version, but when I go into Control Panel and make the contents of the file, the old version is not yet there. I did start, search and typed in "Adobe", and the old version is NOT FOUND! The two versions to change back the turn on button and they both will disable themselves, no matter how many times I fix it! SMH!

  No worries, I was just starting.

  The Flash plugin is stored in this folder:

  C:\Windows\SysWOW64\Macromed\Flash
  

  The filenames for the plugin in Firefox have this model:

  NPSWF32_13_0_0_206.dll
  

  where the middle part (not in bold) is the version number of the plugin.

  Update from Adobe should normally remove older versions, but if they are actively used, it is possible that the update is not able to remove them.

  If you find the file, try to delete or move the temporary office.

  Firefox may not immediately realize that the file has disappeared, but hopefully that will detect only after the next time you're out and start it back up when it updates its scan plugins.

  A little luck?

• Some Web pages displays the text as tabs, and vertical separators

  I have this problem with Firefox where for some reason when I go to some random Web sites or even in my e-mails posted on the Web site is replaced by vertical and tab delimiters

  http://S29.postimg.org/r59ug5r1z/Firefox_Messed_Display.jpg

  But if I highlight the truncated text and then make a copy, I'll stick with success the original/propper text.

  I thought immediately that a plugin/addon to the culprit. So I reset Firefox (Firefox coming stock) and tried the same webpage (plain Firefox here) and got the same result!

  So I tried to run in Mode safe and all of a sudden, everything seemed ok. Then I tried standard mode (still plain vanilla) and yet again got the problem. So I guess that something is wrong with the default configurations in Firefox. Since then, I reinstalled a few plugins while Googling for a solution. No idea how to fix this?

  Try disabling Direct2D by setting the pref gfx.direct2d.disabled true on the subject: config page and leave hardware acceleration enabled otherwise.

  You can try to create a new Boolean pref on the topic: config page and set its value to true

  • Layout.paint_rects_separately = true
  • http://KB.mozillazine.org/about:config

  This way you still have the advantage of hardware acceleration, but can not suffer rendering problems.

  If this doesn't help then you can try to disable hardware acceleration in Firefox (you will need to close and restart Firefox).

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Firefox opens new tabs in the form of tabs first, then move on to the new windows

  I'm running FF 14.0.1 and the problem has persisted through a number of versions.

  Initially FF will open new tabs... CTRL + t work, do a right click to open in a tab etc all work fine. Sometimes the tabs are now question and I can get maybe 20 or open several tabs. And then other times we seem to be an arbitrary limit, say 5 tabs, and then each new tab opens a new window. No external link opens in a new window, a Ctrl + t opens in a new window, all new windows are the only image, for example, you can have a number of windows each tell 5 tabs, just the original (for example) window 5 and then a series of windows with only unique pages in each, and which Ctrl + t doesn't open a new window.

  A full restart sometimes heals things and I can go back to have different pages in different tabs and then something... without obvious motive... launch us in the "new window only" mode after what even if I reduce the number of tabs in the original window many tabs, Ctrl + t opens only new windows.

  He's really starting to happen to me... I have searched the technical support information and wonder about a full reset or even uninstall and reinstall. places.SQLite is verified as valid and I also, have it reindexed all to no effect.

  Try Firefox Safe mode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• How to turn off the "switch-to-tab" feature in the awesome bar?

  When I am a student I usually like to open several instances of a single page, and then direction out there, so the switch-to-tab function is incredibly annoying for me. I imagine that this solution is very simple, but I've been looking for quite some time now and just can't seem to understand.

  You can disable it by installing the switch for no tab no Add on more - https://addons.mozilla.org/firefox/addon/switch-to-tab-no-more/