Calculation of the extended attribute

Similar Questions

• Determine the GLU selected on the calculated extended attribute

  The computation of the results based on values with different units of measurement (UDM), how can I know the unit of measure defined on a calculated digital extended attribute? For example, to get the values target in inches, if I calculate volume length * width * height will produce a value in cubic inches. If the extended attribute GLU has cubic feet, then I need to covert the returned results in inches cubic to cubic feet. The question is, I can determine the unit of measurement for the digital extended attribute computed in the calculation script so that I can calculate the value of the correct unit of MEASURE, or do I have to use a custom calculation class?

  The calculated environmental assessment can have a specified unit of MEASUREMENT, which means that if your calculated EA is Volume, configure you it with a specific unit of MEASURE (for example, cubic feet). Therefore, your JScript can ask values EA of the length, the width and height to return to the unit of MEASURE you need (feet)

  length of var @ GetCellInMyRowByColumnID ('LENGTH'). Value.GetNumericValue ("pi");
  var height @ GetCellInMyRowByColumnID ('HEIGHT'). Value.GetNumericValue ("pi");
  var width @ GetCellInMyRowByColumnID ('WIDTH'). Value.GetNumericValue ("pi");

• At the opening of the various programs I get the error message 'extended attributes are incompatible' and "Consent UI has stopped working" in windows vista.

  Original title: extended attributes

  I started getting the following errors with various programs "extended attributes are incompatible" and "Consent UI has stopped working". I tried to do a system restore but get error inconsistent attributes for 'rstrui.exe '. I also had the message to ShellExecuteEX.exe when you try to install an application and even trying to download the Windows 7 Upgrade advisor. Just to check, I tried to run msconfig from the start and even gives me the message attributes. I am running Vista Home Premium with Service Pack 2 installed. Advice please. Thank you, Roger P

  Hi Roger P.

  ·         When the issue started?

  ·         Remember to make any hardware or software comes to the computer before this problem?

  ·         What antivirus application is installed on your computer?

  Method 1:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I suggest you to follow these steps and check if that helps.

  Methoad 2: try to run the windows recovery option system restore.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  It could be useful!

• Custom section is sign - extended attributes

  Hi, I have a question.

  Anyone know how to get the size of the portion of the summary on a nutritional profile tab and put it in an extended attribute?  Is there a method I can use to get this attribute of data?

  What portions by packaging?  How would I read that in an extended attribute?

  Thank you

  You can use the name of the variable "AmountPerServing" or you can even skip pulling exactly by portion of value.   Or you can use our out of the box function "GetNutrientValuePerServing" to get the real value of the nutrients per serving.   You can see all the available variables and functions of the calculated Extended attribute the User Guide which is part of the Pack of extensibility.

  Mangement of agile product lifecycle for process scalability Pack v3.9

• That El Capitan 10.11.1 extended attributes are needed?

  That El Capitan 10.11.1 extended attributes are needed?

  Some of them seem to be causing many messages from the Console.  Root, /, I have:

  ls-l | grep-@.

  drwxr-xr-x 4 sbehling 136 admin November 23, 2010 @ Google Earth.app

  drwxr-xr-x @ 2 root wheel 68 30 Nov 17:27 network

  drwxr-xr-x @ 4 root wheel 136 30 Nov 17:13 system

  drwxrwxrwt @ 3 root admin 102 1 Dec 16:05 Volumes

  drwxr-xr-x @ 39 root wheel 1326 17 Oct 18:47 bin

  drwxrwxr-t @ 2 root admin 68 30 Nov 17:27 carrots

  lrwxr-xr-x 1 root wheel 11 Nov 30 @ 17:22 etc.-> private/etc.

  drwxrwxrwt @ wheel root 4 136 Sep 22 2013 lost + found

  drwxr-xr-x @ wheel root 3 102 3 November 2013 opt

  drwxr-xr-x @ 59 root wheel 30 Nov 2006 17:23 sbin

  lrwxr-xr-x 1 root wheel 11 Nov 30 @ 17:22-> private/tmp tmp

  drwxr-xr-x @ 10 root wheel 340 30 Nov 17:42 usr

  lrwxr-xr-x 1 root wheel 11 Nov 30 @ 17:23 var-> private/var

  Extended attributes are com.apple.FinderInfo or com.apple.rootless, or both.

  partnership also had an extended attribute FinderInfo, but I removed it with xattr d

  I don't want to 'fix' things unnecessarily, but I hate my console logs, filling too.

  Suggestions?

  Just because it shows in the Console does not mean that it is a problem. The log messages are not normally intended for the user. Developers use them to monitor the activity of an application. It existence does not indicate a problem either.

  What are the messages and they repeat too?

• APPCRASH error - then "extended attributes are incompatible" when I try to do something

  My laptop started to lose connection problems and I kept resetting linksys and it would work and then quit again. I had a mistake some time ago when the download of Norton, but it works very well since their. I then downloaded PC health and scanned and do add on errors. Today I really can't do much. I scan with Spyware Doctor and it said no infections, but still I can't do anything. Every error I get says APPCRASH or BXE and I cannot download anything to try to scan or system restore even the computer I only errors. I had to download Perfect Optimizer, but it will not work... just says everything has stopped working, Windows incident reports even stopped working... APPCRASH wermgr.exe said then C:\Program Optimzer/PerfectOptimizer.exe perfect - extended attributes are incompatible... said that whenever I try to do something? Any ideas?

  Hello
   
  
  It is not recommended to install several security software at the same time. Remove the additional security software, then check. Make sure you have at least a software installed.
   
  Method 1.
  Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
  b. run the malware removal tool from Microsoft.
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
  
  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows

  Vista, Troubleshooting in safe mode problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

   

  We can use the approach 50 / 50 to narrow down the root cause of the problem.

  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• System hangs and displays that Windows has stopped working with a dialog 'extended attributes are incompatible. "

  original title: Mr

  Since the installation of Spyware Doctor, I've known crashes & Windows problem report has stopped working.

  and a dialog box "extended attributes are incompatible."

  I can't access features, etc., programs and support, help window. Y at - it an easy fix or should I

  request Spyware Doctor? Also cannot access the microsoft games.

  Robarm

  Hello

  try a system restore before the installation of spyware doctor

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

• Extended attributes are incompatible - need help urgent please!

  Hello Microsoft Forum,

  I want to keep this short, as I now have serious problems.
  I have Windows 8 Pro, with each update installed.
  I was looking through the net by chance, then the messaging with a friend.
  My friend has design a logo, which he sent via Skype in a .png format.
  When I double click on the logo, the problems started. Everything has become very slow.
  The image does not open and only after 5 minutes of waiting Windows Picture Viewer began to appear.
  The strange thing is, open Windows image viewer my file .wav file music stored elsewhere, not on my desk (the photo was about all this on my desk).
  Image viewer of course could not open the music file.
  So I decided to open the Task Manager, but the error described in the title, "Taskmgr.exe - extended attributes are incompatible" error came, does not let me to open the Manager.
  This also occurs with most of my programs. I get the same error with Regedit, MSconfig and other configuration utilities, and also some programs starts, as Mumble (Murmur Server can, however).
  In fact, all system tools and, more generally, all in need of Admin privilege does not work. Some of these programs give the error message, some simply do nothing at all.
  I'm the admin user and UAC is set to the last row (no notification).
  In safe mode, everything is normal. In addition, disabling antivirus (ESET Smart Security 6) does not solve the problem.
  I followed a few articles I found, which describes the fix from my sound theme on None or default Windows Setup.
  I have, however, never changed anything with my theme, the sound was enabled by default.
  Setting the sound theme "None" did nothing, just like the definition of the theme options.
  Opening to the top of anything with sound (once again a left-click on the icon in the taskbar to bring up the small volume) literally takes ages.
  Right click on the sound opening in the bar of tasks and sounds to change the theme, then takes forever.
  With forever, I hear, I see the labels and buttons to come with 5 second delay between each.
  This is a high end machine with an i7 - 3770K and a Corsair SSD ForceGS, 16 GB @ 1600 MHz RAM and a GPU GTX 670, so normally everything happens at the moment.
  The sound is the only part affected the slow opening of Chrome, Explorer, and some programs that do not work, are at the moment.
  I'm now writing this getting messages of "program does not" and "Incident at sending information" certain programs, in fact utility built into Windows.
  I wish I had of emergency aid, as this is my main work computer
  . I'm missing a few hours of serious work because of this bug, which was published in a 'stable' of Windows version.
  Edit 1: I forgot to mention that I already tried cmd as Admin ' sfc/scannow' option in Mode safe mode (with or without network, cmd does nothing when open as Administrator without mode safe, does not yet show upward) and in the Advanced Restart public services
  Edit 2: I have not installed new hardware or software when this happened in the same State as everything worked.
  I really want to reinstall everything, I hope that a solution to this.
  Edit 3: One of the programs, which frequently closed (I received a message '(program) stopped working' him) is the host of Console window.
  Edit 4: I have disabled all the codecs to start in safe mode, nothing has changed (an article describes install codecs Audacity caused the same problem).
  Edit 5: Now after a second attempt in SafeMode as administrator cmd, command "sfc/scannow" reported an error that the problems have been found, but could not be repaired.
  Edit 6: I also tried (Cmd as administrator in safe mode with network) repair DISM, could not complete because of an error.
  Edit 7: Tomorrow, if I can not find a solution, I'm going to take drastic measures, like restoring to a previous safe point, using the options of recovery and if necessary, even refresh/powerwash/reinstall everything. However, I hope that these measures are not necessary, because they require a lot of time.
  I hope that my question is understandable
  . Excuse me for my arrogant desire to answer, I normally invite people in the forums, but this made my computer unusable work, resulting in some (financial) problems.
  Kind regards
  Richard

  Hi Richard,

  Since the problem started happening when you tried to open the image file that has been sent to you on Skype. There might be a chance that the image file would be infected by the virus, due to which your computer is facing this problem.

  I suggest to run the Microsoft of Networking in Safe Mode Security Scanner and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Group of system cache emptied auto Extended attributes/Custom Sections (prodikaadmin) account

  
  We knew that person logged in as that of our prodikaadmin system account, but in the regular Cache Flush line waiting, it shows empty prodikaadmin the cache of extended attributes/Custom Sections. I want to check if this could be automatically triggered if you rinse manually or we have concern for safety.

  I think it started with 6.1 or 6.11 but yes, the Portal do, Admin and expanded Sections attributes/Custom auto-cache hunting now.

  Hope that helps.

• Extended attributes / Custom Sections and features multilingual

  As we look to move the platform of analytical properties deprecated to recreate in the ext attributes / custom sections, we do not see the possibility of creating these for multilingual data entry.  Analytical properties allow multilingual data entry.  If the plan is to remove this feature of Agile in the future versions we will not be able to upgrade until this feature is present.  Prevents us today to use EA / CS for this data in the form of text must be in the local language for sellers.  Is there a plan to make these multilingual data, or did I miss a feature that I have not yet found?  THX

  Custom data does not support values multilingual for EA/CS, qualitative elements and lines/columns names, but we do not offer an extended attribute free-content multilingual.  For the capture of free text data cannot contain more than one language at a time.  So if you rely on a free translatable analytical property you will not be able to provide the same functionality with extended attributes.  We'll add a text attribute free multilingual in our next major release so you will have to wait the release to completely migrate your analytical properties.

• How to deform using the higher-level object without the borders of the image (which is clipped) taken in the calculation of the chain?

  I have a smart object photoshop image whose boundaries extend beyond art. The image is in a clipping mask, but the curvature with higher object takes the entire area of the image in its calculation of the chain to give me an incorrect result.

  Someone knows how to get to only distort what is inside the clipping mask?

  You can only fix this if cut out you the image in Photoshop and place in Illustrator without a clipping mask

• 1013: the private attribute may be used only on class property definitions.

  In the following code, I get an error. How to solve this problem?

  Line 30

  1013: the private attribute may be used only on class property definitions.

  package

  {

  import flash.display.MovieClip;

  import flash.events.Event;

  Caesar/public class extends MovieClip

  {

  var speed: Number;

  public void Caesar()

  {

  addEventListener ("enterFrame"), move;

  }

  public void move(e:Event)

  {

  This.x = mouseX;

  This.y = mouseY;

  If (caesar.hitTestObject (MainClip.instance.enemyList [i]))

  {

  trace ('Caesar should');

  removeSelf();

  MainClip.instance.finishedMainClip ();

  }

  }

  }

  private function removeSelf (): void

  {

  removeEventListener (Event.ENTER_FRAME, move);

  If (stage.contains (this))

  {

  this.parent.removeChild (this);

  }

  }

  }

  Check your dash... Your removeSelf function is outside the definition of the class... that closing brace entered should be after him.

• Automatic calculation of the budgetary cost

  Hello
  
  In projects approved oracle budget cost can take hours and hourly resources the calculation of rates based on the employee's employment to manipulate himself to prepare the budget?
  
  Is it possible to Oracle project? If so, can any 1 help me on the process?
  
  Thanks in advance much n...

  Hello

  You may want to consider Project Management User Guide, there is a chapter on the budgeting and forecasting.
  This text says:
  You can set budgets and forecasts of projects Oracle to calculate the gross cost, ployez under the burden of costs and revenues for each line in your budget or forecast. Projects Oracle calculates the amounts based on the quantities and amounts that you enter and from the fee that you specify for the costs and income in your budget or the planned rate to plan the scheduling options...
  .
  Note the extended functionality described here is relevant if you enable financial plans and use HTML pages.
  If you use the budgeting forms you will enter the quantity, but need Extension customer Budget to calculate the cost of crude and loaded automatically. You need to develop for these calculations in the extension code.

  Dina

• No data is recovered to add the Dimension attribute in Excel

  Hi Experts,
  
  IAM facing the question below when retrieving values for an attribute dimension in excel, add in.
  
  We have three types of regime, namely AAAA/BBBB/CCCC, which have been refreshed to Essbase. BENAMER will get data on YYYY revenues and employee data of the CCBC through an XREF function.
  
  While recovery data on revenues for the attribute ATTRI1 to the size of the merge attribute member, if we collect of AAAA, he has no problem while when pull us the BENAMER, at the business unit level parent values extracted successfully, but when we drill down to a profit of level 0 Center then values are not recovered. Attributes are associated with level 0 of the dimension of the base members. The above works fine when extract us data from a data form by using the connection of planning.
  
  Any help is appreciated on the above.
  
  Thank you.

  So your fragmented senior level members are dynamically calculated?

  I wonder if it is interacting with the order of the attribute size calc and not rewarding as you wish.

  The SER60 has a lot of good things about the attributes: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_dbag/dattrib.htm

  You can think of to senior level members in the function stored/never share and see if you get the result you're looking for. If the function is sparse, I should think long and seriously if I really want these members to be calculated dynamically due to the impact on retrieval performance.

  Kind regards

  Cameron Lackpour

• Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  Hello I am trying to download an episode of my Podcast podcast connect and get this error?

  Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  my diet is validated? http://beprovidedhealthradio.libsyn.com/RSS

  It worked for my first episode? I don't know why it doesn't work for the second episode. I also use Libsyn if that helps.

  Your show is already in iTunes.

  https://iTunes.Apple.com/podcast/id1151562400?MT=2 & ls = 1

  And everything seems fine with it and your diet.  You ONLY SUBMIT YOUR FEED ONCE.

  That's it - better to stay outside of your podcast connect account - only bad things happen to go there and play with things.  Once again, your show is very well and is in iTunes and your flow is good with it.

  Both episodes show when you subscribe - and your most recent episode appears on the page of the iTunes, general store with in 24 hours from when you posted it.

  Rob W

  https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2 https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2