Call local program library unit

Similar Questions

• Typical call for CM flow / unit / Fax without obtaining additional?

  Configuration:

  Centralize the VMO unit / Call Manager / fax server in the data center. Routers SRST supporting all offices. Of Fax Server supported for the unit, such as RightFax or others on the approved list.

  What would the typical call flow if we wish to have the DID numbers subscribed to do double-duty as their fax number (so that we don't need to get all the new lines DID new business cards, etc.)

  Is it still possible? How would an incoming fax call get routed to the fax server automatically rather than as an incomprehensible series of fax tones in the voice mail box?

  What happens if the user is in fact on their phone and hear the fax tone? Is it possible to Call Manager program to generate a soft button on the 7960 that says 'Send fax'?

  Thank you.

  Short story is there is no way to achieve smooth - for reasons that you kind of point in your question (i.e., what to do if the user is on their phone?). Correctly do gateways would have generated fax tone detection (in some cases, the sender Server/fax won't that until he hears a fax tone on the side response - even if it has a hole in it) and spend an event upstairs that is supplied to the unit via CM - us would then is a fax call and send it to the fax server as well as information on the phone number and number composed as the fax ended up being routed to the right area.

  There was people who tried to do things moderately awkward IVR on gateways (i.e. the caller hears "if it is a voice call, press 1" which has then passes the call via as usual or he will send the call to a port on the fax)-not an ideal interface at all and the location of is not possible among other problems.

  Is really the only way to go about it.

• How to call external programs?

  I've seen people to call external programs through LabVIEW and was curious to know what functions you could use to do this.

  I'm sure that his works using one of the ActiveX or maybe 'open application reference .vi.

  Can someone tell me (or show me) a small example of how to open an external program (that is to say, excellent, Notepad, etc.) by programming

  HI Cory,.

  Take a look using the > examples > communicate with external Applications > ActiveX > Excel > Table write to XL.vi

  To take a step back and answer your Q in General.

  Required or possible methods to interact with external applications depends on of the external application and that she supported mechanisms.

  SysExec

  Used for tha programs can be called from a DOS command line.

  DCOM

  The app was to support this and that you are working with him to of peeks and pokes.

  ActiveX

  Only available on Windows, methods, and properties that depend on all of the app.

  .NET

  New version to interact with applications.

  Have fun!

  Ben

• Reject a call by program

  Hello

  Is there another way to reject a call by programming using injection of strike?

  Rgds,

  Siva

  Try this code.

  class IncomingCallListener2 extends AbstractPhoneListener
  {
      int callId;
      PhoneCall phoneCall;
      String incomingCallPhoneNumber;
  
      public static final long NOTIFICATIONS_ID_1 = 0xdc5bf2f81374095L; 
  
      IncomingCallListener2()
      {
          Phone.addPhoneListener(this);
      }
  
      public void callIncoming(int callId)
      {
  
          phoneCall = Phone.getCall(callId);
          incomingCallPhoneNumber = phoneCall.getDisplayPhoneNumber();
          //incomingCallPhoneNumber = incomingCallPhoneNumber.substring(7);    
  
              NotificationsManager.registerSource(NOTIFICATIONS_ID_1,
              new Object()
              {
                  public String toString()
                  {
                      return "Profile 1";
                  }
              }
              ,NotificationsConstants.FORCED);
  
              System.out.println("After Firing event1");
              NotificationsManager.registerConsequence(ConsequenceImpl.ID, new ConsequenceImpl());
              System.out.println("After Firing event 2");
              NotificationsManager.triggerImmediateEvent(NOTIFICATIONS_ID_1, 0, this, null);
              System.out.println("After Firing event 3");           
  
          }  
  
          //Event e = new Event(0xbd2350c0dfda2a51L, ++_eventIdGenerator, 500, -1, NotificationsConstants.OUT_OF_HOLSTER_TRIGGER);
          //e.fire();
                 */
      }
  
      }
  
      private static final class ConsequenceImpl implements Consequence, SyncConverter
      {
          public static final long ID = 0xbd2350c0dfda2a51L; //net.rim.samples.device.notificationsdemo.NotificationsDemo.ConsequenceImpl
          private static final int TYPE = 'n' << 24 | 'o' << 16 | 't' << 8 | 'd'; //notd for NotificationsDemo
          private static final byte[] DATA = new byte[] {'m', 'y', '-', 'c', 'o', 'n', 'f', 'i', 'g', '-', 'o', 'b', 'j', 'e', 'c', 't'};
          private static final Configuration CONFIG = new Configuration(DATA);
          Player p = null;
          private static final int VOLUME = 80; //% volume
  
          /**
           * A static inner class, describing the Configuration information for this consequence
           * 
  This implementst the SyncObject interface, although returns a fixed value.
           */
          private static final class Configuration implements SyncObject, Persistable
          {
              public byte[] _data;
  
              public Configuration(byte[] data)
              {
                  _data = data;
              }
  
              public int getUID()
              {
                  return 0; //we're not actually doing any synchronization (vs backup/restore) so we don't care about this value
              }
          }
  
          public void startNotification(long consequenceID, long sourceID, long eventID, Object configuration, Object context)
          {
  
              EventInjector.KeyCodeEvent ev = new EventInjector.KeyCodeEvent(EventInjector.KeyCodeEvent.KEY_DOWN, ((char)Keypad.KEY_END), KeypadListener.STATUS_ALT,5000);
          EventInjector.invokeEvent(ev);
  
          }
  
          public void stopNotification(long consequenceID, long sourceID, long eventID, Object configuration, Object context)
          {
  
          }
  
          /**
           * It is likely that the following call will return a separate config object for each SourceID, such as data
           * that describes user set notification settings. However, for this example, we a trivial, arbitrary conifg object
           */
          public Object newConfiguration(long consequenceID, long sourceID, byte profileIndex, int level, Object context)
          {
              System.out.println("in newconfiguration method()");
              return CONFIG;
          }
  
          /**
           * Called when there is inbound (from the desktop) data to be converted to object form
           */
          public SyncObject convert(DataBuffer data, int version, int UID)
          {
              //it's up to us to write and read the data. we apply a four byte type and a 4 byte length, and then the raw data
              try
              {
                  int type = data.readInt();
                  int length = data.readCompressedInt();
                  if ( type == TYPE )
                  {
                      byte[] rawdata = new byte[length];
                      data.readFully(rawdata);
                      return new Configuration(rawdata);
                  }
              } catch (EOFException e) { //we've prematurely reached the end of the DataBuffer
                  System.err.println(e);
              }
              return null;
          }
  
          public boolean convert(SyncObject object, DataBuffer buffer, int version)
          {
              boolean retval = false;
              if ( object instanceof Configuration )
              {
                  Configuration c = (Configuration)object;
                  buffer.writeInt(TYPE);
                  buffer.writeCompressedInt(c._data.length);
                  buffer.write(c._data);
                  retval = true;
              }
              return retval;
          }
  }
  

• is there any MS software to program microcontroller unit

  is there any MS software to program microcontroller unit

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on MSDN. Please ask your question in the MSDN Windows native development Forums. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/category/windevgeneral

• There is a file or a folder called "c:\Program" which could cause some applications will not work correctly. Rename it to "c:\Program1" would solve this problem

  Original title: message 'warning of file name '.

  In the last week or so, I get a warning box appears on my desktop (from Windows 8) whenever I start.  He said "there is a file or a folder called"c:\Program"that could cause some applications don't work does not correctly."  Rename it to "c:\Program1" would solve this problem.  You want to rename now? "and there are 2 options:"Rename"or"ignore ".  I have "Binged", and there are a few very old discussions about it (like 5 + years ago) and the consensus seems to be that it is a matter of Windows.  What should I do to get rid of him?

  OK, so here is how I SOLVED this problem.

  In my case while studying this on a device of clients, I found that a VOIP program caused this problem and the error message popped up, and rename the folder won't work because the program is running.

  Then I found the voip program (in the taskbar in this case) and closed. I then found the file that needed change of name, "c:\program" and renamed to 'c:\program1 '.

  Then restarted the computer and... Don't pop up.

  I hope this helps.

• When you access all tasks of merger Applications home page, "an error has been received for the task manage worker research of goal setting." This task is identified by the HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS code that calls the program/WEB-INF/oracle/

  We have installed version of the Application from merger 11.1.7 HCM and CRM modules.

  It is 2 node architecture IDM IE components installed in a single node and Fusion components installed in another node.

  We are able to start the components of IDM and Fusion successfully, but when users try to access any task of merger application home page, they receive the below error

  
  

  A consumer of portlet error has been received for research of parameter task manage worker objective. Report the error details to the product owner next goal management.
  
  An error has been received for research of parameter task manage worker objective. This task is identified by the HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS code that calls the program module code fndSetup /WEB-INF/oracle/apps/fnd/applcore/lookups/publicUi/flow/ManageCommonLookupsTF.xml#ManageCommonLookupsTF. Review logs consumer and producer for details about this error.

  
  

  
  

  This may be related to your other question about "FUSION_APPS_WSM_APPID-KEY" as newspapers contains exceptions such as:

  oracle.wsm.policymanager.PolicyManagerException: WSM-02081: failed to logon to perform the requested action.

  Please refer to the document Fusion Service account password Expiration causes Portlet producer errors of Application (1486388.1) to learn how to check and set the password. There is also exception:

  javax.security.auth.login.FailedLoginException: [Security: 090302] authentication failure: User FUSION_APPS_PROV_PATCH_APPID refused

  This is probably caused by an expired password, please see Fusion applications servers are not in - password policy error: 9000: GSL_PWDEXPIRED_EXCP: your password has expired (1629927.1).

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• How do to identify the documents called "models of library" using the RESTful API?

  How do to identify the documents called "models of library" using the RESTful API? Furthermore, what constitutes a document to be a "model of library"? I see nothing in the libraryDocuments RESTful documentation that describes this type of document, such as presented on the tab 'Manage' my developer account. Please see the screenshot below. There is a model of Document named "[DEMO ONLY] Test model" listed under "Library Templates" and I try to figure out which classifies that document to be included this way and how does produce a similar announcement by using the RESTful API.

  

  Thank you!

  Hello

  You can connect to access library models using the REST API, use 'GET /libraryDocuments' allowing to recover documents in library for a user. Models are created in the account of EchoSign, which later are accessible via the REST method mentioned above.

  Jat

• Building an application that uses all local program or library files

  I need to build an application that will not use any local or program files LabView libraries (although LabView is installed on the PC). I am also curious to know if anyone knows if there is a way to debug such a request (that he compiled state).

  Any help on these matters would be greatly appreciated.

  Hello

  I'm not clear on what you're trying to accomplish here. As the previous poster mentioned, if you enable debugging when you build your application, you can remotely connect and probe the block diagram of the executable running. Executables using the runtime engine, but could also access the driver or other time if you use a specialized tools/module box. All this depends on your application.

  -Zach

• HP50g - nested call local procedure - why does not work

  I am attaching the simple test program to illustrate the problem

  «
  "Ť N".
  "N N."
  »
  »
  '2 AA EVAL '.
  "AA BB Ť
  '3 AA BB EVAL EVAL '.
  »
  »

  (Ť means arrow to the right).

  Two local procedures are defined: the 1st (AA) makes the place of its setting and the 2nd (BB)

  calls AA.

  I expect 9 and 4 as the result (3 and 2 places). But the program gives:

  9

  2

  'AA '.

  Then call AA of BB does not work, why? How to make it work?

  Someone might he say?, thanks

  Resolved, solution was using local variables compiled, thanks anyway

• Try to call the number 0330 United Kingdom using Skype, will not connect

  Hi, can someone help me with this one? I am trying to call a number which is a line of technical assistance from outside of the United Kingdom, but it will not be connected, any ideas?

  Hello and welcome to the Skype community.

  Some owners of number UK 0330 accept calls from UK

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• How to call a program with a click of a button?

  Using LabVIEW, I want to create a function where a user just click a button to call a windows program.

  For example, the user clicks on the button "Solitaire" and poster the Solitaire game on the screen.

  Thank you.

  Hi fmpfmpf,

  You can use the 'SystemExec.vi '.

  Mike

• Is it possible call the program from the window a *.exe from a script

  I need to call program from a window, compiled into another language, from A Framemaker2015 script?

  I saw "shell.run ("file etc.) listed for other Java.

  bobsteamer,

  The file object has an execute() method that should work for you. For example:

  var file = new File("C:\\SomePath\\SomeApp.exe");

  leader. Execute();

  Russ

• local help library

  How to make a library of local help for Lightroom 5.4 on a pc that is not connected to the boarding school?

  Dear Rikk

  Thank you for your quick response.

  Kind regards

  Leif

• ThinApp + local program installed

  New on ThinApp but here's what I got so far:

  We have a large enough program installed on several PC that needs to be updated every week or so.  Breast of this program, it sends parameters to a locally installed scanning program which, in turn, uses a driver of scanner installed locally.  I've got our broad program thinapped to run off a network share, start the scanning program and work well; but when you try lauching the Analysis ToolPak for the 2nd time (never close the thinapp) errors in scanning program installed locally citing that it cannot load the driver for the scanner.  I made isolation merged with sandbox on the local user's PC.  In the sandbox, thinapp brings to scan program files and driver of the scanner in.

  It seems that once thinapp brings files in the bin to sand and use them once, do more work again unless I close the thinapp, remove the tray with sand and revive the thinapp.  I really think thinapp is where we need to go as far as application support but won't get it budget until it works.

  Any help is greatly appreciated!

  Yes, you must edit the file #Attributes.ini to merged to this place.

  The files present on your system will be drawn in the sandbox if your isolation mode is WriteCopy. WriteCopy allows the physical to be seen and used by the virtual application files. But if the application modifies the files protect us the system and to the actual change in the tray for sand.

  Please keep in mind that the logic behind where the files will be in sandbox sand or not is quite important. There are two ways that a file accessible from an application. Either with a read or write access. With read access, the application cannot modify the file and that's why us won't copy it to the sandbox. If the application opens the file with write access, we have everything first to copy the file into the sandbox and then put it back on demand. If your application cannot modify files in a normal way. It can only open files with write access, but do not change the content.