Call Multi ViewController TaskFlows

Similar Questions

• How to call a default taskflow on school activity

  I have a taskflow TF A with two fragments of the page page B, page C where page B is the default activity and page C is called from the page B. I have created a link 'Enter' to invoke the TF A dynamically.  'Enter' link and taskflow region are separated by the group separator. When I first click on the link, I see page B and then clicked action "details" it displayed page C. Now, when I click on the link "Enter" in the group separator again, it takes me to a landing page which is page B, instead he remains in the page C. How to ensure that clicking on the link takes me to the default activity again?

  I use ADF 11.1.1.7.0

  Thank you.

  1. modify the parameters of the taskflow to accept a string, say "refreshThis.

  2. on your home page, set the property of refreshing liaison taskflow with "ifNeeded.

  3. a variable pageflowscope refreshThis, for example "currentTimeM" parameter value

  4. click on the link, the pageflowscope current time milliseconds value variable.

  This will refresh the taskflow whenever you click on the link, as the pageflowscope variable will change and therefore your area will get updated.

• values of VO transitional passive get lost after call to sub - taskflow

  Hello

  I have a taskflow (topflow) which has a

  (1) activity of the initial method (a line is created in a transient VO and set the current row, as few attributes of the line are defined)

  (2) an activity of views that display the transient as VO form, it also has a button

  (3) and a subtaskflow (innerflow)

  When topflow is called the activity of the first method is called and the view is displayed and click on the button for inside taskflow is shown

  Internal flow has

  (1) an activity view with a button and

  (2) a return activity with food-Save-Point set to true

  When internal taskflow is called it displays a page with a button and clicking the button invokes the activity back-(bringing the user to view the topflow activity.)

  And there is a page that has topflow added as a region.

  I followed the following steps:

  (1) run the page - the activity of the initial topflow method is called and activity in the workflow view appears with the values of the transient VO.

  (2) click the button - the innerflow is called and shown.

  (3) click button taskflow internally - the user is taken to view the activity in topflow

  But after step 3, I see that the values in the transient VO are lost. (It shows as if there is no current line).

  I 'State of passivation' checkboxes 'Include all transitory values' in the selected transitional vo, also I put an attribute in the VO as a key attribute.

  But when I run the piece of code:

  Am = (AppModuleImpl) Configuration.createRootApplicationModule AppModuleImpl ("model. AppModule', 'AppModuleLocal');

  ViewObjectImpl vo = am.getTestTRVO ();

  Line = vo.createRow ();

  row.setAttribute ("Dept", "Math");

  row.setAttribute ("DeptId", "1");

  vo.insertRow (row);

  vo.setCurrentRow (row);

  The ID of the string = am.passivateStateForUndo (null, null, PASSIVATE_UNDO_FLAG);

  am.activateStateForUndo (id, ACTIVATE_UNDO_FLAG);

  Line = vo.getCurrentRow ();

  System.out.println ("Dept:" + row.getAttribute ("Dept"));

  Configuration.releaseRootApplicationModule (am, true);

  It prints the values correctly.

  No idea why this is happening? I use JDev version 11.1.2.2.0

  Thank you

  Anil

  Is - that the VO has "No. Rows" option set.

  > On the general page of the presentation Editor, expand the Tuning section and in the recovery of the database group box, select the option lines No..

  Other guidelines for transient VO are listed here Application state management

  In case if you still see the question, can you please share a test case where the problem can be reproduced?

• Call taskflow ADF with parameters using POST

  Hello

  Can you give an example or point me to an example describing citing taskflow adf with settings?

  The requirement is to have the parameters passed using the POST method and not by passing the parameters in the url.

  Jdev: 11.1.1.4.0

  Thank you!

  Thanks Frank!

  My use case was to invoke a jspx (using the POST form) that has a taskflow for the region.

  I was able to invoke the jspx via POST and move the jspx attributes to the taskflow using the #{param. PARAM_NAME} (where PARAM_NAME is defined in form invoking the jspx).

  I was able to invoke the taskflow adf of external application without adding parameters in the url. By calling jspx and taskflow not directly, I was able to avoid transmitting the taskflow id and location.

• How can I call a support bean taskflow method?

  Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
  
  I like to call a method (taskflow) back bean!
  
  my bean code:

      public void imageLinkActionListner(ActionEvent actionEvent) {
          String              id      = actionEvent.getComponent().getId();
          int                 linkID  = Integer.parseInt(id.substring(4));
          DCBindingContainer  bc      = (DCBindingContainer)ADFUtils.getBindingContainer();
          DCTaskFlowBinding   tf      = null;
          
          System.out.println("Region Change...."+id+" INT "+linkID);
          switch (linkID) {
              case LINK_CALENDAR_REGION:
                  tf = (DCTaskFlowBinding)bc.findExecutableBinding("calendartaskflowPage");                    
              break;
              case LINK_MAIL_REGION:
                  tf = (DCTaskFlowBinding)bc.findExecutableBinding("mailtaskflowPage");                    
              break;
            case LINK_ADDRESS_REGION:
                tf = (DCTaskFlowBinding)bc.findExecutableBinding("addresstaskflowPage");                    
            break;
            case LINK_BLOGS_REGION:
                tf = (DCTaskFlowBinding)bc.findExecutableBinding("blogstaskflowPage");                    
            break;
            case LINK_MAPS_REGION:
                tf = (DCTaskFlowBinding)bc.findExecutableBinding("mapstaskflowPage");                    
            break;
          default:
              return;
          }
          if (tf != null){
              uiMainRegion.setRegionModel(tf.getRegionModel());
              uiMainRegion.setValue(tf.getRegionModel());
              tf.getExecutableBindings();
              AdfFacesContext.getCurrentInstance().addPartialTarget(uiMainRegion);
          }
          
      }

  I like to call * #{backingBeanScope.mapBean.initMap} *.
  My taskflow source

  <?xml version="1.0" encoding="windows-1252" ?>
  <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
    <task-flow-definition id="map-task-flow">
      <default-activity id="__1">map</default-activity>
      <view id="map">
        <page>/map/map.jsff</page>
      </view>
      <method-call id="initMap">
        <method>#{backingBeanScope.mapBean.initMap}</method>
        <outcome id="__7">
          <fixed-outcome>init</fixed-outcome>
        </outcome>
      </method-call>
      <control-flow-rule id="__2">
        <from-activity-id id="__3">initMap</from-activity-id>
        <control-flow-case id="__5">
          <from-outcome id="__6">init</from-outcome>
          <to-activity-id id="__4">map</to-activity-id>
        </control-flow-case>
      </control-flow-rule>
      <use-page-fragments/>
    </task-flow-definition>
  </adfc-config>

  Hello

  call the bean, the EL in Java using #{backingBeanScope.mapBean.initMap} as an expression of the reference method. If you try and go directly to the bean then chances are that the instance is unavailable. EL in Java using always ensures that

  Frank

• passing the parameter to bounded taskflow

  jdev 11.1.1.7

  I call a taskflow 1 with parameters as:

  < taskFlow id = "OrgRegistrationTF1".

  taskFlowId="/WEB-INF/OrgRegistrationTF.xml#OrgRegistrationTF".

  Activation = "deferred."

                xmlns=" http://xmlns.Oracle.com/ADF/controller/binding "> "

  < Parameters >

  < parameter id = "OrgId" value = "#{pageFlowScope.OrgId}" / >

  < / Parameter >

  < / taskFlow >

  Now this taskflow calls internally the taskflow(taskflow 2) another and I need to pass the same parameter that I got while watching taskflow1.

  How can I change the setting to a taskflow which is called from a taskflow?

  Sorry for this question!

  It's simple

  When you set the parameters of taskflow were suppased to be be designated as:

  /Web-INF/OrgRegSubTF.XML

  OrgRegSubTF

  OrgId

  #{pageFlowScope.OrgId}

• Import a file XML Multi camera hangs in the first

  Hello.  I'm working with an imported FCP XML file which is a multi camera edit or as PCF called multi clip.  I'm only using 3 cameras.  Whenever I will select no changes on the timeline inside the first, I get the following error and then crashes the first: [/ Whitfield/MediaCore/Backend/Make/Mac /... /.. / Src/Sequence/TrackItemSelection.cpp-156]

  I use first 4.0.1.  I am running OS 10.5.8.

  Does anyone have any ideas?

  The first thing to try is to upgrade to version 4.1 of the Pr CS4.

  -Jeff

• Satellite ALPS touchpad without normal scrolling only reverse

  I have my new laptop for 1 week and 1 thing guard bothers me:
  It is only possible to inverted 2-finger scrolling which feels very natural to me. I want to be able to scroll normally: down to bottom and vice versa

  I tried to replace the driver with the most recent and also a few other drivers but no work or same result.
  pls advice because they are a deal breaker for me!

  I don't know what version of ALPS using you but, as far as I know, there are more options for scrolling. You can use one or two finger scrolling options and they separately can be enabled or disabled.
  On some versions of software, this option is called multi finger scroll or distinct option called "edge scrolling.

  Have you checked all the options available?

• My Satellite L750D went from a dual core to core single processor

  In may, I noticed that my laptop is running slowly. I asked for help from another forum and they suggested that I downloaded a program called Speccy. After the execution of this program, I have used before, I noticed that the CPU was only using a kernel. This could be great for a regular user, however, I need my laptop for the work of the University that I am a networker.

  I had to change Windows 7 settings easier to get a decent performance from him. I'm used to be able to watch videos full HD from my hard drive on my laptop with worries. Now, he hardly plays the same movies.

  Someone at - it ideas? I have also disappeared in msconfig and cannot specify how many processors are set to run.

  Hello

  S core CPU multiprocessing can be enabled and disabled in the BIOS.

  The option can be found in the BIOS-> power management tab and it is called multi-Processing CPU
  If it s activated, all the processor cores will be used.

  In addition, don't forget that dynamic CPU frequency mode is switched to the dynamic switch

  If this option is enabled, the consumption of power of processors and automatic clock speed switching functions are active.

• "Graph - Simple" change issues to include several axes

  I'm changing the workspace "Graph - Simple" object to allow several axes. However, I was do unexpected behavior and I can't find a way to restore the configuration when the next load.

  1. Is there a way I can use the "Custom Data" variant in the Item.Data cluster to store the configuration?
  
  
  2. If not, is there another way I can do this work within VeriStand without having to re - develop a full graphical object (based on the free label template) just to add this feature?

  I am currently using VeriStand 2014, but I can be updated until 2015, if there is a new feature that would help.

  Thank you!

  You're very close to having the right answer, but what you call won't work, unfortunately. Overall, it would be nice to put data in the custom as attributes of variant data field, as long as you crush all VeriStand attributes can be expected otherwise. Even if you do this, however, there is no way to save this copy of the cluster of the top-level VI item data. I can't in any way you can get this to work.

  However, you do have to start from scratch. It is an available add-on here called Multi-Y chart with channels calculated. It has multiple scales are natively, but this is a graph open source with a superset of the features in the chart - simple. Here you could probably change to have two or more axes and find a good way of saving data so that it persists on the next load.

  I did not write this control and never used personally, but it might be a more open alternative to watch before thinking to start over from scratch.

• Generation and acquisition of analog signals simultaneously on USB-6212

  Hello, I am novice programmer DAQ trying to create (what I think is) something very simple.

  I use a box NI USB-6212 and LabVIEW 8.5 is trying to generate a pulse train analog while recording a simultaneous analog input.

  My first question is, is it possible?

  Since I'm new to this, I use the DAQ assistant in LabVIEW.  I can acquire a signal, I can also generate the desired signal, but I can't seem to operate simultaneously.

  I have been successful in obtaining my program to work with both USB-6212, but I have to be able to do this with a single.

  I have attached the block diagram and vi, I hope that's easy to answer the question, even if my research so far has left me empty handed.

  Any help would be greatly appreciated!

  Jon L

  Hi Jon,

  Well, first of all welcome to the DAQ programming! I took a peek at your code and published it with a device simulation very well, so I ran with the PCI 6251 card in my computer and he did not also get errors.  Could you post the error code you get?

  If I could figure out what is your error, I would say you encounter errors of buffer because it is too much overhead in the DAQ to wizards in the face of data rates.  My suggestion would be to use the example called "Multi-Function Synch AI - AO.vi.  This program can be found in the Finder for example of NOR (see Help"find examples in LabVIEW).  "" It appears in the input and output material"DAQmx ' synchronization ' Multi-Function.

  Can you give that a try and let me know how it goes?  Thank you!

• Error 1031 with VI Server

  Hello

  I'm working on a project that uses a VI server to control a piece of hardware constantly between several DLL calls. I have several remote calls that simply enter the main server reference and call a version of a function remote.

  It works for about half of the functions, the other half are back error 1031. All functions remotely are similar Open Application references-> full class name to search for distance VI functions exported-> reference application is open with a type of entry that is-->--> call multi-function remote control using nearby.

  It is all within a class on LV2012 and running on windows XP sp2. It was developed in Windows 7 LV2012 and seems to be a behavior, but the material was not available for a complete test.

  Thank you

  / r

  James

  Fix nothing has changed. Although I have discovered that the error didn't exist under Windows 7 but in the functions I was using to test.

  I managed to solve my problem. It turns out that when I was pulling the full name of VI in the exported list VI, all the failed screw was pulled with: Instance.0 attached to them. The solution was to ensure what I called just className.lvclass:viName.vi without the qualifier to Instance.

  Thank you

  / r

  James

• waveform acquisition and an average of

  Hello!

  I need to acquire signals of samples N M and their average. Waveforms are started by external trigger, internal clock. Repetition rate is maximum 5 kHz. The wavelength must be close to the reverse of this (preferably in 95%, for example, 0.95 * 0.2 ms). No trigger must be lost. M is (preferably) of the order of thousands. N is (preferably) as temporal resolution allows. After receiving the data, any time can be spent on whatever the task. What will be the right strategy to deal with this problem?

  M - and E-series, C-interface for NIDAQmx DLL maps (I'll also undestand v8.2 example labview)

  Thank you!

  Boris

  Hi Boris,.

  If you have a 6289, there is no average capabilities of equipment, but performing the calculation of the average in the software is not a problem. If I understand your requests, all requests are achievable.

  You are limited by the number of channels for the number of playback channels on your 6289, but if it's ok, you're all set.

  External triggers and internal clock are quite feasible. Have you looked into the Finder of example of NOR? There are many examples which will do almost everything of what you specify. ; If you can work with LabVIEW 8.2 I open your finder example and discover two examples in particular. The first is called Acq & Clk of the NTI tension of Graph - Dig Start.vi. This can be found in the Finder example under the following folder path. Material input and output > DAQmx > Analog measures > tension. The second example though, I might help you is called Multi-multifunction-Ctr-Retrigg Pulse Train generation to HAVE sample Clock.vi. This example is located in the path of the material Input and Output > DAQmx > synchronization > multifunctional. This example uses a meter (which is triggered at the material time) as the sample for your task to acquire analog clock.

  Essentially, these examples can be translated directly into C programs, with the accompaniment of installation and definitions, etc. which are used in C. If you are curious about the C functions that relate to a DAQmx function, see Help reference DAQmx C, located in the start menu > programs > National Instruments > NOR-DAQ > Documentation. There are also examples of C who install if you install support for the CVI when you install DAQmx and they install the the following location: C:\Documents and Settings\All Users\Shared Documents\National Instruments\NI DAQ...

  Chris W

• HP HDX16t-1200

  I tried to restore my system.  After the backup is complete, I started the restoration, only to be informed that the BOOTmgr was missing.  I've been invited to hit ctrl/alt/del to restart.  Now, it's the only message I get EVERY TIME I start it.  Get the initial windows logo on a black screen.  Then who disappears and I get the message about the BOOTmgr and ctrl/alt/del.  Very frustrating.  I have the restore disks that did nothing.  And try to do it by installation manager got me to this point.

  SOMEONE HELP ME PLEASE! (I use another computer to do this)

  Jenni - Jenni

  Hi, Jenni:

  See if you can get the recovery disks to work by inserting the first disc in the DVD player.

  Then restart the PC and at the beginning of the HP welcome screen, press the F9 key to access the one time boot menu.

  Select the DVD drive (could be called multi-baies) and press the Enter key. You should get a message on your screen that says in essence... Try to boot from DVD... Press a key to boot from the DVD.

  Press a key and I hope that the recovery disc starts.

  Paul

• WMP and super Audio CD

  I bought a super audio CD, in effect of Deep Purple's Machine head. The disc has two parts. First part is stereo PCM DSD &, including seven originals of 1972. Second part is called multi-channel DSD, which contains ten tracks. The problem is that only seven securities in part one are displayed in Explorer Windows and WMP11. WMP supports the super audio CD?
  Furthermore, I use Windows Vista Home Premium SP1.

  Leonard

  The Super Audio CD require specific devices to be able to play their return, these are stereo units usually home and so you will not be able to play such a disk on any computer device currently. See http://en.wikipedia.org/wiki/Super_Audio_CD Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.