values of VO transitional passive get lost after call to sub - taskflow

Similar Questions

• WebCenter content get lost after the redeployment of the application

  Hi all

  We have a portal web Center running application to our company. After it has been deployed in the production environment, a member of the admin team added some content on some pages using the Oracle WebCenter Portal administration Console. Now, there are a few requests of change that we are working on the same application. Every time we complete the change and it is deployed to the integration and Production environment, content published by the administration team is lost. They are having to redo this content on this page on any redeployment of the application. It always happens in integration / prod environment. Is there a way, that when redeploy us the application, we do not replace the content already added to the pages of the application?

  Or do we need to perform the same content in the Jdeveloper environment and produce some deployable for this be packed with deployment files? Please let us how we can resolve this situation. Thank you.

  Kind regards

  Anitha

  Hi all

  We found what was the problem that was causing the above behavior. According to the guidelines of this doc (WebCenter portal deployment: Applications Framework - 11 g Release 1 (11.1.1.6.0)), all content added to the pages, should be retained even after the redeployment. Only changes made to the navigation model must "round-trip on development." Added content on the pages after that initial deployment runtime does not "round-trip on development."

  The question was essentially in the way in which the application has been deployed. Each time, the new version was to be deployed we were not deployment out the version of the application and the deployment of the new version. Now, we have used "Redeploy" option to deploy the release. This fixed our problem. The content is now kept after the new deployment version too. It was also important to use the same MDS and Partition repository for deployment after the addition of the duration of the content to the pages.

  Kind regards

  Anitha

• Is it possible a 0 is displayed after the decimal point when the value is rounded? (I get: 20-20, 1;) "I need 20, 0-20, 1).

  Using the effect of text "cursor", I am able to view replace "30 ° C" "35.5 ° C". My question is: is it possible a 0 is displayed after the decimal point when the value is rounded? (I get: 20-20, 1;) "I need 20, 0-20, 1). I use this code:

  Temp = effect ("Slider Control") ("Slider");

  sliderValue = Math.round(temp*10)/10;

  [sliderValue + ' ° C ' "']

  Here is the solution:

  numDecimals = 1;

  Temp = effect ("Slider Control") ("Slider");

  sliderValue = (Math.round(temp*10)/10).toFixed(numDecimals);

  sliderValue + "° C";

• How to recover email files lost after compressing files

  I am using windows XP sp3, two days ago, I performed an outlook express file compression process, after only a quick jump

  and asked me to do. Unfortunately, a part of the e-mail files (year 2011) were found missing in the outmail storage box after file compression.

  I think that they were deleted automatically during file compression. Although I found a backup file in the trash, I can't yet recover

  the e-mails lost after recovery.

  For your information: before compressing files - size storage box outmail - abt, 1.2 GB / after compression 827 MB

  MY mailbox: * address email is removed from the privacy *

  It is a common problem with OE because if we let the dbx files grow beyond a few hundred megabytes, they are subject to corruption.  You should do an immediate backup of your messages in the event of further loss.  So, if you have bak files in the trash or in the message store directory, you can try to recover them.

  For references, see points 2, 3, 4 and 6 here: www.oehelp.com/OETips.aspx#2 and import the bak files see here: www.oehelp.com/backup.aspx#imp1 and if you were unable to recover what was lost, then see here: www.oehelp.com/DBXpress/ the latter is able to scan the entire drive for messages and bypassing the file system and if something can get back them It can.

  Steve

• Why the index are lost after recovering from a REPLICATE_PERSISTENT region?

  GemFire Version V7.0.1.3 for region below specifications. java.lang.String com.foo.bar.Positon after recovery of the store persistent it is no markings on the region. All indexes are lost. CacheFactory cacheFactory = new CacheFactory(); cache = cacheFactory.create (); Ins ByteArrayInputStream = new ByteArrayInputStream (cachexmlstring); cache.loadCacheXml (ins);

  OK I understood why the index get lost. Is that the way cache is initialized.

  CacheFactory cacheFactory = new CacheFactory();

  cache = cacheFactory.create (); Cache is created here without consideration of persistence pdx

  Ins ByteArrayInputStream = new ByteArrayInputStream (cachexmlstring);

  cache.loadCacheXml (ins); Now loading data it has no definition pdx index data.

  So now even if I get the data loaded in the regions, when I probe through gfsh, there's no index.

  I just changed the code of

  FileOutputStream ops = new FileOutputStream ("cache.xml");

  OPS. Write (cachexmlstring. GetBytes());

  CacheFactory cacheFactory = new CacheFactory();

  cache = cacheFactory.create ();

  The indexes are coming fine...

• Develop settings lost after re - import the DNG files folder

  I use LR for several months and - after having used to his peculiararities - love the program.

  Tonight, I have re-imported one file to DNG files that I had previously withdrawn from the LR - using the import option 'Add '. When the develop module, I noticed that my original develop settings have been applied is no longer.

  These settings are not incorporated into the DNG files? How could they get lost? They wrote, too, when re - import files?

  I always back up my catalog before closing. The backup of the catalog contain the original developing parameters for these DNG files?

  I know I must have done something wrong! Please inform and explain. Thank you.

  The development parameters are only in the catalog, unless you have autowrite to xmp enabled in the settings of catalog or if you have selected the image files and saved the data to develop with Cmd/Ctrl-S to the selected files.

  When you delete the files from the catalog data to develop will too after a short period (allows cancellations) so if you have a catalog of backup with files until they have been removed you could open that save develop settings and then open your catalog of work and read the metadata,.

  I keep all my files in Lightroom, as it is my rather than the operating system file manager. Then I know (I hope) where everything is and what happens to my images.

  Your type of error has been made by many, including myself and is part of the learning curve for digital imaging!

• Aftertouch message get lost?

  I have a Yamaha Motif Rack ES of Nektar Panorama P6 and iLok connected via a hub ("HooToo") USB3 generic port USB3 on my MBP.  The Mac USB2 port is connected to the Focusrite Scarlett 18i20, and another keyboard (old Korg N1) is connected to the midi in port of the Focusrite.

  I have several patches where I play the Motif Rack ES with the nectar, with Aftertouch keyboard mapped to the Modulation of the motive... setting to bring in the vibrato with aftertouch. Many times it seems that aftertouch messages get lost... Modulation will come as planned when I press harder the nectar, but often doesn't come back down again... Vibrato stays on until I have pressure and then release again. My vibe all the loot.

  Did someone else had a problem like that and maybe found a solution or workaround? I suspect that the USB hub can be a bottleneck, but I don't see any way around that.  Maybe it's the ground itself? I didn't notice messages are lost during playback of the soft synths, but I'm not sure about this.

  Try to connect the Motif Rack ES MIDI to the Focusrite.  If it solves the problem, using a USB cable on the ground by midday. It seems that I remember reading about the problems of USB communication with that of patterns and MO6s time on the Yamaha forum. USB hub is powered? Try another USB cable and a powered hub.

• HP Pavilion Notebook - 15-p206: WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10

  Hello
  
  WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10.

  Update driver BIOS update effective system is rebooted and the wifi does not.
  
  Please help me.

  In the box to Ask Me whatever it is next to the Windows icon, type in "Installed updates", and then click view installed updates.

  Select the update that is dated from when you had the question.

  Click it to uninstall.

  You have to restart the laptop afterwards.

• I forgot my security question answer on my account and I get lost email address of relief

  I forgot my security question answer on my account and I get lost rescue address, how do I get my new security question?

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• WiFi lost after winning 10 improvement on Satellite P745-S4217

  Help! WiFi lost after upgrading to windows on my SATELLITE of P745-S4217 10

  Drivers have installed successfully but when I troubleshoot, windows tells me wireless capability is turned off

  I search on the net, but still no solution to my wireless connection interruption

  Any help will be appreciated thanks

  Hello

  In the past, you need to turn on the WiFi using the FN keys, but I think that this should not be necessary to help to win 10.

  In any case, I think that you must connect to the laptop to the internet using LAN cable.
  Then, you must uninstall the WLan Device Manager driver.
  After that, restart the laptop in order to win 10 to select the Wlan driver automatically.

  As far as I know that Win 10 must check for new drivers available WLan and in the best of cases after the update, the WiFi connection should work again.

• If I use different, the same computer, but an iCloud account will be my projects get lost?

  If I use different, the same computer, but an iCloud account will be my projects get lost? I downloaded the trial version to my friend with her iCloud computer and now it is expired and my project was not yet ready. If I connect with my iCloud on my friend's computer and buy FCPX, my project will be there? And if not, if I buy the program with my friend iCloud account, is it possible I could move my computer later? I would not buy an app €300 just for my friend...

  LLA libraries are separate from the application. That you have subscribed to the trial is quite distinct from what you use to connect to the purchase. However, once you bought with an Apple ID it is that you always have to sign in with to receive updates. The application and the Barrie similar don't really care what you signed in in iCloud.

• All my tabs are lost after downloading an add on. The tabs start showing my default homepage.

  All my tabs are lost after you download an add-on. The tabs start showing my default homepage. Do I have to have all closed tabs before you download an add-on Firefox? Even the site of add-on Firefox restarts as my default homepage. Is there an add-on to prevent that from happening?

  This has happened

  Each time Firefox opened

  Is always

  Diito. Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6. en-US; RV:1.9.2.6) Gecko/20100625 Firefox/3.6.6

• Network is lost after stanby mode - Satellite M40

  I'm from Holland
  I have a Dug Satalite M40 - 170 for several times that the network connection is lost after sleep.
  What is the sollusion. OS = Windows XP prof.

  [Edited by: admin November 23 05 07:07]

  Hello

  My unit is also connected to the company LAN. You use very often stand-by and hibernation mode, but after the awakening of procedure the connection is establish again shortly after.

  Try disabling the network card for a just a few seconds and turn it back on. This option that you can find in tool ConfigFree.

  Good bye

• lost after upgrade to El capitan photos

  Help

  I lost priceless pictures of a loved one lost after updating my old OS to El Capitan.

  I now try to revive photos, hold the option key and select another photo library to see if this will bring my photos.

  I was using an old OS and when my iphone 5s was stollen over the weekend, I bought an iphone 6 when I plugged the new phone to put all of my previous settings and data on it said I have to upgrade my operating system to synchronize this phone.

  I hesitate to update the system, but did it anyway.

  then, when she opened the only pictures that remained on the computer are those that have been taken with my iphone or photos that come from the internet or social networks.

  I lost all my albums of photos taken with a canon ios device.

  These photos are not in time machine.

  How can the computer just delete the photos on its own... How does he choose what to keep and what to delete.

  Please help... I refuse to give up and accept that the computer can simply delete photos and videos.

  Take a look in your images folder and see if there is an iPhoto library.

  What OS did you spend.

• Port resets the value after calling DAQmxStopTask.

  Hello? My device is PCI-6025E and I used to reset by sending 0x00 on #0 with DAQ digital output port. It must be reset if the VC software button power ++ is pressed.

  But after a trial of DAQmx, even after that I sent 0x00, it will be set the value of 0x00 to 0xFF after calling DAQmxStopTask. I want to know how do I know it's 0x00, ahead of DAQmxStopTask.

  I tried to read the port #0 when writing of 0x00 in this regard, but it hangs or it returns error; He said that the port is reserved and can not read the port until the task (in writing) is completed.

  Here is the code that I tested.

  error int = 0;
  TaskHandle taskHandle = 0;
  TaskHandle DItaskHandle = 0;
  uInt8 data = 0 x 00;
  char errBuff [2048] = {'\0'};
  Int32 wrote;
  Int32 read;
  uInt8 dataToRead;
  bool32 bTaskStatus;

  DAQmxErrChk (DAQmxWriteDigitalU8(taskHandle,1,1,10.0,DAQmx_Val_GroupByChannel,&data,&written,)); creaded the 6.5.2009
  DAQmxErrChk (DAQmxIsTaskDone (taskHandle & bTaskStatus));
  DAQmxErrChk (DAQmxWaitUntilTaskDone (taskHandle, 1.5)); 6.5.2009

  {if (bTaskStatus)}
  Reading test - DI on written port0-/ / / 6.5.2009
  DAQmxErrChk (DAQmxCreateTask("",&DItaskHandle));  6.5.2009
  DAQmxErrChk (DAQmxCreateDIChan (DItaskHandle, "port0/Dev1", "", DAQmx_Val_ChanForAllLines)); 6.5.2009
  DAQmxErrChk (DAQmxStartTask (DItaskHandle)); 6.5.2009
  DAQmxErrChk (DAQmxReadDigitalU32(DItaskHandle,1,10.0,DAQmx_Val_GroupByChannel,&dataToRead,1,&read,)); 6.5.2009
  printf ("acquired data: 0x%X\n",dataToRead "); 6.5.2009

  }

  Try to use the node property DAQmx to reverse digital lines.

  According to the that you configure DI / use the following

  Int32 __CFUNC DAQmxSetDOInvertLines (TaskHandle taskHandle, const char [channel], data bool32);

  Int32 __CFUNC DAQmxSetDIInvertLines (TaskHandle taskHandle, const char [channel], data bool32);

  Kind regards

  Glenn

  Technical sales engineer

  National Instruments