Call the Dashboard Editor

Similar Questions

• call the template editor

  Hi all!

  I have been using NI editor for a long time. It is a program very useful, and it can be called form WILL / VBA. That is why it is so useful. I would like to know how to use this feature or the program from my own code. (call parameterized editor e.g. my program to match pattern as in VBA form / VA - for the current Image).
  I used the system run vi - running standard, but in this case, the image file *.exe files must be selected.

  I would like to know how can I use T.E. in my own program, as flexible as possible, GO / VBA - for the current image.

  Thank you very much!!!

  Hi Durnek,

  As far as I understand it, you want to develop an application in LV that does Pattern Matching.

  To do this, you need a model that you define in the template editor.

  In delopyed applications, the templates are predefined, in which case Editor is a great tool, but didn't need to be called at every race.

  Yet, we met with similar requests, and we also have a product suggestion to Board editor in LV, similar to going

  We hope that this feature will be available in the future.

  Until then, here is a few parameters that could be described

  / Newsath - pm - gpm-gpm2 d
  starts Publisher and opens the image located at the specified location.

  Settings - pm - gpm-gpm2 d are optional and allows to create a corresponding model type model, geometric matching (inheritance), geometric new correspondent and vice inspection respectively.
  You can combine these parameters to create a model of the desired type. Only the specified tabs will be activated. If you don't specify any optional parameter, all tabs are available.

  / editath
  change model that is at the specified location.

  It is the responsibility of the user to save the model manually in the interface, since the training interface is called by the command line and has no way of the calling application whether the user OKs or cancels the editor.

  An important point in what concerns the appeal of the model by using a command line: If the path contains a space, you must use quotation marks, so that the exec knows that there is only one parameter.
  For example:

  'Path to the Editor\NI Vision template Model Editor.exe' "/ new: \Images\8 bit\image.tif '-pm - gpm d.

  Please answer if this meets your application requirements

  Best regards

  Mircea

• Complex of acceleration without the motion Editor?

  Now that the query editor is obsolete, how can we mitigate the complexes in our animations?

  Hi all

  Flash Pro CC 2014 (v 14.0.0.110) is now available for download through the creative application of cloud.

  We have included a whole new motion editor and several other new features with this release of Flash Pro. The new query editor is completely redesigned, intuitive and easy to use while retaining the basic features and backward compatibility with Flash CS6

  To call the query editor, just double-click on your motion tweens on the timeline (or right click and select "Refine the Motion") and the motion Editor opens in the context of the scenario itself. Double click again to collapse once you have made your adjustments.

  Complete list of the new features of Flash Pro CC 2014 is available at these links:

  Overview: https://www.adobe.com/in/products/flash.html

  What's new: https://helpx.adobe.com/flash/using/whats-new.html

  Release notes: https://helpx.adobe.com/flash/release-note/flash-professional-cc-2014.html

  Videos: https://helpx.adobe.com/in/flash.html

  Thank you

  Mabrouk

• When in my wordpress dashboard, the Visual Editor does not work?

  Regularly when I'm in my wordpress dashboard, the Visual Editor does not work. Sometimes, not all the time. I tried the following:
  Disabled individual plug-ins
  Theme modified
  cache cleared
  uninstalled, then reinstalled Firefox
  'disable the Visual Editor' unchecked

  Thanks a lot for any help

  When this happens, you are totally unable to type/edit in the edit box, or are there limited functionality? The toolbar appear?

• find if in the sequence editor API call

  I swear that I found this somewhere once but can't find it now.  What is the API call (or another mechanism) to determine if I am running out of sequence with respect to a user interface editor?

  What I want to do is if running the sequence editor, make a call, but if running the user interface, make another.

  Thank you.

  RunState.IsEditor

  Thank you

  PH

• Error when calling model sup in the XML editor

  Hi friends,
  For the part of the header of my report, I create a template void and I try to call it.
  I called the sub model by using the following commands: -.
  <? call@inlines:header? >
  <? end call? >
  Then in the body, I'm importing this file using the <? import:file:///C:\sreekanth\Header.RTF? >
  When I run the report I get the following error
  Due to: java.io.FileNotFoundException: /C:\sreekanth\Header.rtf (no such file or directory)
  Please help me.
  I can't find the reason for the error.
  But when I run it on the spot, it works fine.
  Is no problem when I create the submodel? What are the steps to create a sub termplate?

  Hello

  the BI Publisher Forum may be a better place for you to get a response than the reports Forum.

  Concerning
  Rainer

• I want that thunderbird to run in the background when I call the default mail client

  I have a software which sends emails for reports. The software calls the default mail client (Thunderbird) and sends the e-mail. However, this open Thunderbird and gets in the way. Is there anyway this could send the email without opening Thunderbird? Can it run in the background like outlook express? It should be closed after the e-mail was sent.

  http://KB.mozillazine.org/Thunderbird_3.0_-_New_Features_and_Changes#Send_in_Background

  Open Tools(or AppMenu/Options)/Options/Advanced/general/Config. Editor, paste mailnews.sendInBackground into the search box, and then double-click the preference to set it to true.

• Unable connect to the sequence editor of

  Hello

  I seem to have something broken in my version of TestStand 4.2. When I run the sequence Editor starts in the logged out State.  When I click on Login... nothing happens.

  I think this may have something to do with process templates - I had installed a updated the SequenceModel.seq which has been altered by a co-developer and re-installed the original on it back because the updated process template wanted to access the components that I don't have on my computer (which is a sql database).  Anyway, since I did it, I can't have the logon dialog box to display.

  TIA

  Ron

  It is the reminder of the frontend, not the process model, which is responsible for implementing the connection/disconnection process.

  There should be two versions of the FrontEndCallbacks.seq file on your computer as follows:

  (1) in \TestStand 2010\Components\Callbacks\FrontEnd, this version here must have a sequence called LoginLogout

  (2) in \Components\Callbacks\FrontEnd, this version must be an empty sequence file.

  In addition, make sure that you do not have the station defined option to automatically open a session to the user of Windows System.

  Hope this helps,

  -Doug

• I want to use the expression editor control in a DLL VC ++ how?

  Hello

  as mentioned I want to use the expression editor control in my DLL written with VSC ++ 2005 MFC. But I came across some problems:

  If I simply add the ExpressionEdit control in the toolbar to my dialog box then the dialog box will appear not during execution. As soon as I remove the control from the dialog box appears.

  In the examples of TS is a called "TCL" (...) Instruments\TestStand national 4.1.1\Examples\Tcl\source\EditSubstep). It is programmed in C++ and uses the expression editor control.

  The original dll works fine, but as soon as I compile the editsubstep with my VS 2005 I get a runtime error (see image).

  What should I do to be able to use this control?

  Does anyone have an example of a job for me?

  Frank has soon

  Hi, I found the solution and now it works fine.

  I just had to enable support for OLE controls in my dll.

  Nevertheless, thanks for your help!

  BOOL CMyDLLApp:: InitInstance()

  {

  CWinApp:: InitInstance();

  AfxEnableControlContainer();  enable support for OLE controls

  Return TRUE;

  }

  Frank has soon

• How to unlock "snap to grid" in the symbol Editor?

  I am trying to edit a section symbol (found in the database of Multisim) and the resolution of the grid in the symbol Editor is too coarse. I tried to disable 'snap to grid', but the ease of doing this seems to be inactive.  There is an icon called 'snap to grid', but there seems to be no State 'disable snap to grid', available.

  Please notify. Thank you, Todc.18

  Hello

  In the Multisim symbol editor Select display > draw grid > grid no., within the limits of drawign, you should now be able to work in mode works.

• Cannot invoke the picture editor

  I'm calling the standard image editor, but but failed. I use 10.3.2 API and testing my application on the Simulator.

  Here is my code:

  Inside the .pro file, I added libs:

  LIBS += -lbbsystem
  

  Inside the .bar file, I added the following permissions:

  access_shared
  

  hand. QML:

  import bb.cascades 1.4
  import bb.cascades.pickers 1.0
  import bb.system 1.2
  
  Page {
      ImageView {
          id: imageView
          scalingMethod: ScalingMethod.AspectFill
      }
  
      attachedObjects: [
          FilePicker {
              id: filePicker
              type: FileType.Picture
  
              onFileSelected: {
                  invocation.query.uri = "file://" + selectedFiles[0];
                  invocation.trigger("bb.action.EDIT");
              }
          },
  
          Invocation {
              id: invocation
  
              query {
                  invokeTargetId: "sys.pictureeditor.cardeditor"
  
              }
          }
      ]
  
      actions: [
          ActionItem {
              title: "Select Picture"
              ActionBar.placement: ActionBarPlacement.OnBar
  
              onTriggered: {
                  filePicker.open();
              }
          }
      ]
  }
  

  Debug gives me the next exit to start the application:

  InvocationWrapper::onQueryFinished: menu service population failed
    query mimeType=""
    query uri=""
    query data=""
    query metadata=QMap()
    query action= ""
    query target= "sys.pictureeditor.cardeditor"
    query perimeter= 0
  InvocationPrivate::onQueryResolved: query failed, no armed signal sent.
  

  What's wrong?

  After some tests, I can confirm that this call does not work in QML, it will work only in C++.

  Here is a code snippet

  applicationui.cpp

  void ApplicationUI::invoke(const QString& targetId, const QString& actionId, const QString& mimeType, const QString& uri, const QString& data) {
      qDebug() << "Invoke:" << targetId << actionId << mimeType << uri << data;
  
      InvokeRequest request;
      request.setTarget(targetId);
      request.setAction(actionId);
      request.setMimeType(mimeType);
      request.setUri(uri);
      request.setData(data.toAscii());
  
      // Start the invocation
      InvokeManager* invokeManager = new InvokeManager(this);
      invokeManager->invoke(request);
  }
  

  hand. QML

  onFileSelected: {
      _app.invoke("sys.pictureeditor.cardeditor", "bb.action.EDIT", "", "file://" + selectedFiles[0], "")
  }
  

• To an existing dashboard, how can I go back and discovers the source of data for the items in the dashboard? More precisely to determine why the data not displaying on the dashboard for a host where the agents seem to work fine.

  Here are the servers in the cluster.  The active cluster in the attached image is PrdERx2.  The zeros should have a count associated with them equal to zero.

  Thank you

  Barry

  Hi Barry -.

  If the dashboard in question was created with WCF (our Framework Web component that is included with the product), then using the tab design inspecting dashboard design suggested Bart is a good. WCF dashboard get much of their data by querying the Foglight data model so once you are in the editor of WCF, change views to queries drop-down list and see what queries can exist in this module WCF. Test if you find to make sure they return data. Also change the functions drop-down list and see if you can test as well.

  I hope this helps.

  Robert

• Unable to display the dashboard for tracking Session in Foglight

  Hi all

  We are unable to see the 'Application' at the Session followed by Fogligth 5.6.4 dashboard. There is something hindering this point of view, we checked in the Configuration, but has not found the cause.  Please suggest a solution that would help us to get this point across.

  Kind regards

  Guenoun.

  Gokuinath,

  To determine whether the configuration is bad, there is not enough information in the screen shot. The distribution of time seen request response expects as input a result of Application FxM (which represents the data of an FxM application definition).

  I noticed that your Applications dashboard is an iterator. I expect a different dashboard (created as a dashboard grid) to call the opinion of iterator Applications for each application of FxM result in a table.

  On the next page you sent, there is a tab Contaxt. If you click it, you will be able to tell if a result of Application FxM is passed to the request response downtime notice. If there is not transmitted to the data view no data will appear.

  David Mendoza

• HELP: Call card photo editor error

  Can I call core image change with this code

      bb::system::InvokeRequest cardRequest;
      cardRequest.setTarget("sys.pictureeditor.cardeditor"); //
      cardRequest.setAction("bb.action.EDIT");
      cardRequest.setUri(QUrl::fromLocalFile(fileName));
      cardRequest.setFileTransferMode(bb::system::FileTransferMode::CopyReadWrite);
      cardRequest.setMimeType("image/png");
      mInvokeManager->invoke(cardRequest);
  

  But there are a few errors:

  1. While the command "save under" not this editor was (at least once) - altered photo is not registered at all.

  2. If I try to edit any image gallery of base - editor called from my application will always crash during the recording of the file...

  Is it possible to solve this problems?

  Or maybe there is some other params for calling core editor?

  Invoking the image editor is not supported at this time. It should be soon in point 10.2.

• How to pass the time slot to the dashboard in URL parameters

  Hi all

  Does anyone have example on how to spend the time slot to the dashboard in URL parameters?

  That's what I tried. Normally, the dashboard has timeRange as a required context, I deleted and added "startTime" and "end" like required context, so that I can spend 2 timestamps in URL, and then I created a 'extra context' called "timeRange", which calls a WCF function to create a CustomTimeRange, it works pretty well. But the problem is if I have exploration down this dashboard to a different dashboard, the slot not transmitted properly. So I guess, I was not the right way. Does anyone have an example?

  Thank you

  Xiaoning

  1 re: timeRange not spent in drilldown pages

  Please confirm that you have defined one or more entries in context "Required". If you do not, please add a (like "hostName") and re - test. It work?

  2. with 'nologin' user URL redirects to the login screen

  Yes, what is expected. With nologin user, you should always use the form http://foglight_fms:80/console/foglight_ext?viewId=system:mywcfmodule.1?hostName=myhost of the URL rather than the

  form of http://foglight_fms:80/console/page/System:mywcfmodule.1?hostname=myhost .

  It would be great if you could post a brief description of your design dashboard once you have this work. That sounds like something that the other members of the Foglight community would be very interested!

  Kind regards

  Brian Wheeldon