call the template editor

Similar Questions

• Need urgent help! In my Vision Application, how to extract the parameters of the geometric model specified curve was generated by the template editor OR?

  I have an application of machine vision, in which the geometric pattern match technique was used to find the target in the images of type variant.

  as we know, we do a geometric model by model OR editor in the editor we can adjust the parameters of the curve specified settings to get the desired curves and we derive the custom box to ignore during the match. then we save the use of the same model in our application of vision.

  Now my question is coming. When I program my request for the geometric game. I have specified the parameters of the curve for the entrance of the IMAQ Advanced Setup learn ringtone 2, of course, I have to adjust this identical to the model, but I don't know how we extract the geometric model. I tried all the methods, for example, I can read data custom, IMAQ get characteristics of the geometric model(it's just for the basic functionality? so is there even a VI based edge?), even at anasys PNG file formats! But I can't read the info of the geometric model by myself!

  It is also illogical to adjust the CURVE SETTINGS manually again for the " IMAQ Advanced Setup Learn Pattern 2" after that I already have in the template editor OR!

  Hello

  Why do you need to specify the curve settings once again, if you have already built a model using the template editor? You don't need to use "IMAQ Advanced Setup learn geometric model 2 VI" to find games (see the attached example).

  You can wire the 'curve settings' control to 'IMAQ configuration geometrical game model 2 VI', but the values are not used if wire you a Boolean true to the node "use learning curve settings" (it's like that by default). To prove it, I enclose a small program with pre-created model (using the template editor) for a geometrical alignment. The model and the test of three images are also included.

  Try changing the settings of the curve with the 'use know curve settings' enabled, and you will see the corresponding score remains the same. Disable the Boolean control, then try to change the curve settings.

  Also take a look at the detailed help for "IMAQ configuration geometrical game model 2 VI", specifically the "learning curve parameters of use."

  I hope this helps.

  Best regards

  K

• Call the Dashboard Editor

  I'll need to open the report BI Publisher dashboard BI without header.
  When I use the URL of my report with the parameter '_xmode = 2' I see the report? but I need the user and the password.
  It is difficult to use.
  
  Help me.
  1. How can I send a user name and password is report URL
  or
  2 How can I call without header of BI dashboard report.
  
  
  Thank you.

  Bad Forum

• Complex of acceleration without the motion Editor?

  Now that the query editor is obsolete, how can we mitigate the complexes in our animations?

  Hi all

  Flash Pro CC 2014 (v 14.0.0.110) is now available for download through the creative application of cloud.

  We have included a whole new motion editor and several other new features with this release of Flash Pro. The new query editor is completely redesigned, intuitive and easy to use while retaining the basic features and backward compatibility with Flash CS6

  To call the query editor, just double-click on your motion tweens on the timeline (or right click and select "Refine the Motion") and the motion Editor opens in the context of the scenario itself. Double click again to collapse once you have made your adjustments.

  Complete list of the new features of Flash Pro CC 2014 is available at these links:

  Overview: https://www.adobe.com/in/products/flash.html

  What's new: https://helpx.adobe.com/flash/using/whats-new.html

  Release notes: https://helpx.adobe.com/flash/release-note/flash-professional-cc-2014.html

  Videos: https://helpx.adobe.com/in/flash.html

  Thank you

  Mabrouk

• find if in the sequence editor API call

  I swear that I found this somewhere once but can't find it now.  What is the API call (or another mechanism) to determine if I am running out of sequence with respect to a user interface editor?

  What I want to do is if running the sequence editor, make a call, but if running the user interface, make another.

  Thank you.

  RunState.IsEditor

  Thank you

  PH

• How you change the HTML to a template that you created in the great editor? E10

  Hello-

  
  

  I have a template that I created in the great editor but I can't enter the HTML code to make a few small changes, but I can't find anything in the action menu you or in the area of the Toolbox that would allow me to do. Is this possible or only if I downloaded HTML from outside the system?

  
  

  Thanks in advance!

  You can access the source of the individual items on the canvas by selecting it and then right click. There will be a "View Source" option in the context menu. However, if you need access to the source for the container itself (rather than just what is inside), which unfortunately is not possible.

• How to fix: Page Template styles do not respond to changes in CSS files in the text editor of 'Developing' Admin Console

  I bought a model site.  It has a css file, /styles/screen.css

  It also has a template page 'home' with the link to the style sheet within the < head > section:

  "< link href="/styles/screen.css "rel ="stylesheet"type =" text/css"media ="screen"> < / link >

  I am tempted to change screen.css, by editing the file in the 'Develop' administration Console and pressing the 'Save' button on the file when changes are made.

  However, the changes do not appear in the preview of the Page template.

  However, if I do a < style > section in the head <>of the page template and put the change, it displays correctly.

  It's like the Page template does not recognize changes to the screen.css.

  I press "Save draft" and "Update" before you press 'Preview' to check for changes.

  My question is how to fix the Page Template styles that do not respond to changes in CSS files in the text editor of 'Developing' administration Console.

  I am a new user of BC and I agree it is likely a result of not knowing how the css BC.

  Thanks in advance for any assistance with my issue!

  Hello

  I think that you too complicate the thinking problem that BC is a non-standard way of processing applications to a css file. This looks more like a cache or perhaps a code problem. However, I would be happy to take a look at your code and see if I can remember where is the problem. Try Skype me and screen-sharing and I'll see what I can do. It is probably fixed quickly :-) My ID:s 'noviumdesign '.

  Anton

• Error when calling model sup in the XML editor

  Hi friends,
  For the part of the header of my report, I create a template void and I try to call it.
  I called the sub model by using the following commands: -.
  <? call@inlines:header? >
  <? end call? >
  Then in the body, I'm importing this file using the <? import:file:///C:\sreekanth\Header.RTF? >
  When I run the report I get the following error
  Due to: java.io.FileNotFoundException: /C:\sreekanth\Header.rtf (no such file or directory)
  Please help me.
  I can't find the reason for the error.
  But when I run it on the spot, it works fine.
  Is no problem when I create the submodel? What are the steps to create a sub termplate?

  Hello

  the BI Publisher Forum may be a better place for you to get a response than the reports Forum.

  Concerning
  Rainer

• Unable connect to the sequence editor of

  Hello

  I seem to have something broken in my version of TestStand 4.2. When I run the sequence Editor starts in the logged out State.  When I click on Login... nothing happens.

  I think this may have something to do with process templates - I had installed a updated the SequenceModel.seq which has been altered by a co-developer and re-installed the original on it back because the updated process template wanted to access the components that I don't have on my computer (which is a sql database).  Anyway, since I did it, I can't have the logon dialog box to display.

  TIA

  Ron

  It is the reminder of the frontend, not the process model, which is responsible for implementing the connection/disconnection process.

  There should be two versions of the FrontEndCallbacks.seq file on your computer as follows:

  (1) in \TestStand 2010\Components\Callbacks\FrontEnd, this version here must have a sequence called LoginLogout

  (2) in \Components\Callbacks\FrontEnd, this version must be an empty sequence file.

  In addition, make sure that you do not have the station defined option to automatically open a session to the user of Windows System.

  Hope this helps,

  -Doug

• I want that thunderbird to run in the background when I call the default mail client

  I have a software which sends emails for reports. The software calls the default mail client (Thunderbird) and sends the e-mail. However, this open Thunderbird and gets in the way. Is there anyway this could send the email without opening Thunderbird? Can it run in the background like outlook express? It should be closed after the e-mail was sent.

  http://KB.mozillazine.org/Thunderbird_3.0_-_New_Features_and_Changes#Send_in_Background

  Open Tools(or AppMenu/Options)/Options/Advanced/general/Config. Editor, paste mailnews.sendInBackground into the search box, and then double-click the preference to set it to true.

• I want to use the expression editor control in a DLL VC ++ how?

  Hello

  as mentioned I want to use the expression editor control in my DLL written with VSC ++ 2005 MFC. But I came across some problems:

  If I simply add the ExpressionEdit control in the toolbar to my dialog box then the dialog box will appear not during execution. As soon as I remove the control from the dialog box appears.

  In the examples of TS is a called "TCL" (...) Instruments\TestStand national 4.1.1\Examples\Tcl\source\EditSubstep). It is programmed in C++ and uses the expression editor control.

  The original dll works fine, but as soon as I compile the editsubstep with my VS 2005 I get a runtime error (see image).

  What should I do to be able to use this control?

  Does anyone have an example of a job for me?

  Frank has soon

  Hi, I found the solution and now it works fine.

  I just had to enable support for OLE controls in my dll.

  Nevertheless, thanks for your help!

  BOOL CMyDLLApp:: InitInstance()

  {

  CWinApp:: InitInstance();

  AfxEnableControlContainer();  enable support for OLE controls

  Return TRUE;

  }

  Frank has soon

• call the owner VI several times

  Hi all

  I try to call the owner VI several times and was not sure if it's possible. I try to call the same VI in a VI with different condition.

  I have this VI as active with reentrant template (VI_1), and inside the loop, he calls another instance of this model (let's call it VI_2) and wait for the completion called VI (VI_2) and proceed to the next action. The problem, it's wait until done does not wait even if I set it to True. Can someone tell me what I am doing wrong? or even if this is possible.

  Thank you in advance.

  So the VI calls himself?

  If so, you can drop the VI to its own diagram if it is defined in the version of LabVIEW 2009 neres and later.

  Tone

• How to unlock "snap to grid" in the symbol Editor?

  I am trying to edit a section symbol (found in the database of Multisim) and the resolution of the grid in the symbol Editor is too coarse. I tried to disable 'snap to grid', but the ease of doing this seems to be inactive.  There is an icon called 'snap to grid', but there seems to be no State 'disable snap to grid', available.

  Please notify. Thank you, Todc.18

  Hello

  In the Multisim symbol editor Select display > draw grid > grid no., within the limits of drawign, you should now be able to work in mode works.

• Cannot invoke the picture editor

  I'm calling the standard image editor, but but failed. I use 10.3.2 API and testing my application on the Simulator.

  Here is my code:

  Inside the .pro file, I added libs:

  LIBS += -lbbsystem
  

  Inside the .bar file, I added the following permissions:

  access_shared
  

  hand. QML:

  import bb.cascades 1.4
  import bb.cascades.pickers 1.0
  import bb.system 1.2
  
  Page {
      ImageView {
          id: imageView
          scalingMethod: ScalingMethod.AspectFill
      }
  
      attachedObjects: [
          FilePicker {
              id: filePicker
              type: FileType.Picture
  
              onFileSelected: {
                  invocation.query.uri = "file://" + selectedFiles[0];
                  invocation.trigger("bb.action.EDIT");
              }
          },
  
          Invocation {
              id: invocation
  
              query {
                  invokeTargetId: "sys.pictureeditor.cardeditor"
  
              }
          }
      ]
  
      actions: [
          ActionItem {
              title: "Select Picture"
              ActionBar.placement: ActionBarPlacement.OnBar
  
              onTriggered: {
                  filePicker.open();
              }
          }
      ]
  }
  

  Debug gives me the next exit to start the application:

  InvocationWrapper::onQueryFinished: menu service population failed
    query mimeType=""
    query uri=""
    query data=""
    query metadata=QMap()
    query action= ""
    query target= "sys.pictureeditor.cardeditor"
    query perimeter= 0
  InvocationPrivate::onQueryResolved: query failed, no armed signal sent.
  

  What's wrong?

  After some tests, I can confirm that this call does not work in QML, it will work only in C++.

  Here is a code snippet

  applicationui.cpp

  void ApplicationUI::invoke(const QString& targetId, const QString& actionId, const QString& mimeType, const QString& uri, const QString& data) {
      qDebug() << "Invoke:" << targetId << actionId << mimeType << uri << data;
  
      InvokeRequest request;
      request.setTarget(targetId);
      request.setAction(actionId);
      request.setMimeType(mimeType);
      request.setUri(uri);
      request.setData(data.toAscii());
  
      // Start the invocation
      InvokeManager* invokeManager = new InvokeManager(this);
      invokeManager->invoke(request);
  }
  

  hand. QML

  onFileSelected: {
      _app.invoke("sys.pictureeditor.cardeditor", "bb.action.EDIT", "", "file://" + selectedFiles[0], "")
  }
  

• How to call the function cascade BlackBerry

  I begineer in blackberry c ++.

  I do two class is testobject and second in test .i call the onther text function average () and nexttext();

  so please how to call this function.

  // Default empty project template
  #include "TestObect.hpp"
  
  #include 
  #include 
  #include 
  
  using namespace bb::cascades;
  
  TestObect::TestObect(bb::cascades::Application *app)
  : QObject(app)
  {
      // create scene document from main.qml asset
      // set parent to created document to ensure it exists for the whole application lifetime
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
      // create root object for the UI
      AbstractPane *root = qml->createRootObject();
  
      // set created root object as a scene
      app->setScene(root);
  }
  
  void TestObect::test(){
  
      qDebug()<< "****************Naveen";
  }
  

  I insert also declared in the header file.

  Q_INVOKABLE Sub test();

  then I create another test class.

  /*
   * test.cpp
   *
   *  Created on: Apr 2, 2013
   *      Author: nksharma
   */
  
  #include "test.h"
  
  test::test() {
      // TODO Auto-generated constructor stub
  
  }
  
  void test:: nexttest(){
      qDebug()<<"***********Next test*********"
  
  }
  test::~test() {
      // TODO Auto-generated destructor stub
  }
  

  error in the file namespace,

  here in file herder

  the namespace error

  /*
   * test.h
   *
   *  Created on: Apr 2, 2013
   *      Author: nksharma
   */
  
  #ifndef TEST_H_
  #define TEST_H_
  
  class test {
  public:
      test();
      virtual ~test();
       Q_INVOKABLE void nexttest();
  };
  
  #endif /* TEST_H_ */
  

  You have a space between the colon and the n in:

  void test:: nexttest()
  

  Another thiing, if you are using Q_INVOKABLE, you must declare Q_OBJECT in your front header file public:

   

  
  If you're still having problems, try to clean up the project with Project > clean...