Call the Disconnect event problem

Similar Questions

• Make the new field by calling the onchange event

  I have a drop drop-down list in a form. The value of this area consists of two values, say 'A' and 'B '. I want the situation as follows:

  For example, when the page is loaded in the default for drop down box is 'A '.

  When I change the value in 'B', I want one, or more new field appear in the form. Then when I changed the value in 'A' again, the field who have appeared before, become disappeared.

  Y at - it no reference sample or the code to solve this problem?

  Thanks in advance

  There is nothing server-side in everything that you have described here.

  --

  Adam

• Screen pushing problem in the incoming call disconnected event

  When a phone call disconnects I would push a screen containing some information about the appellant

  In the call disconnected event I'm doing this:

  UiApplication.getUiApplication () .requestForeground ();

  UiApplication.getUiApplication () .pushScreen (new CustomScreen());

  It works most of the time.

  But when I close this screen the phone keypad.

  And sometimes my screen does not get pushed and the keypad appears.

  I could be wrong, but I guess that my screen is pushed in the wrong context?

  Can someone point me in the right direction?

  See you soon

  I have a slightly different take on this problem.

  I think that you run this code:

  UiApplication.getUiApplication () .requestForeground ();

  UiApplication.getUiApplication () .pushScreen (new CustomScreen());

  at your disposal, and if you run in the context of phone, not your application.

  The treatment of changes to it it context moves to your application - the best way to proceed is to use a Global event.  Search for informaiton on world events so this is new to you.

• I have a problem in my iPhone 5 s while I call someone when on-call time at 1 hour of the call is disconnected and say call failed can help you me in this problem.

  I have a problem in my iPhone 5 s while I call someone when on-call time at 1 hour of the call is disconnected and say call failed can help you me in this problem.

  What iOS version you are running. I've heard of it, but I heard no talk for a long time... You can update to iOS.

• How do I know if a call is disconnected by the user or by the appellant?

  When there is an incoming call, the phone user can log out by clicking on the red button, or it can be cut by the appellant. I must say that out of these two types.

  But no matter how the call is interrupted, the system continues to produce a callDisconnected event.

  Also, I tried to save an event key listener to monitor the events of the red button. But as the system have consumed the event, the system will not send this event of red button at my request.

  Do you have an idea how know if a call to imcomming is disconnected by the user or by the appellant?

  I tried, although the keydown event of the red button has been consumed by the system, but the keyup event is still distributed, so that the application can listen to the event keyup to know if the call is interrupted by the appellant or by user.

• Problem with the disconnection of the customer

  Hello, I installed vmware ESX 3.5.0 server build 158874 a vcenter 2.5.0 build 174768 2and vmware view 4.0.

  every day the client disconnect server vdm. I see this error on the vdm server:

  Event of VMware View ID 104

  (F69B60DFEE328A0C22DC2BF98D8970DF) Carrier 1 IOException. Remote address is zero: an existing connection was to be closed by the remote host

  I control the network for problem but nothig is false.

  any idea or suggestion to determine what is the probem?

  Thank you very much

  Hello

  Please look under Server connection

  -Configuration

  -Global Settings

  Here is the Session timeout point.

  Default value is 600 minutes, and after that the connection will be closed.

  So carry on thr time as you need.

  MCP, VCP

• How can I check if a function is or is not called the event listener? in Flash CS4 (AS3)

  Hello

  I ran into a small problem.

  I put an event listener inside a loop for and the loop inside a function.

  I want the loop for to end as soon as the listener of events inside the for loop calls the function.

  Here is the general code for a better image.

  Code:

  this.addEventListener(Event.ENTER_FRAME, function#1);
  function function#1(event:Event):void{
            if(something is true){
                      for(var i = 0; i < numOfmy_mcs; i++){
                                this["my_mc_"+String(i)].addEventListener(MouseEvent.CLICK, function#2);
                      }
            }
  }
  function function#2(e:Event):void{
  //do something cool here
  } 
  

  Thanks for any help!

  You can determine what the event object dispatched using e.target and e.currentTarget.  and it is not supposed to return anything to a listener.

  everything you try to do?  Click on one of a large number of objects and make and/or determine what?

• voice call blocking the g motorcycle problem

  voice of incoming and outgoing call is blocked in bike G. This problem occurs frequently. You need to restart the phone again and again to rectify the problem. It is a very serious issue with bike G. Please suggest its permanent attachment.

  have you tried factory reset

  I also had the same problem since upgrading to 4.4.2

  so I called the helpline they suggest me to factory reset

  and yes the method worked for me you should try this

  but the problem is not resolved correctly connection losses a few times

  but now I'm able to make a voice call

• I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem. Help, please

  I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem.  Help, please

  1. Windows Mail.  But he argued that email account for more than a year without problem.

  2 here is the full error message:

  "Are subject: how pumpkin pies are made ', account: 'pop3.live.com', server: 'smtp.live.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, error number: 0x800CCC19.

  ("How pumpkin pies are doing it" the subject of an email I tried to answer to and it does not work)

  I get another message when sending email: "your POP2 server has not responded in 60 seconds.  You want to wait 60 seconds for the server to respond? »

  And I'm waiting for 60 seconds, several times and it does not send

  It was 1 year there, not more. Not sure when it started.
  Read this article from Microsoft Help Support &:

  http://support.Microsoft.com/default.aspx/KB/926374

  t-4-2

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The program called WiFi radar installation problems

  I am trying to install a program called easy WiFi radar with and without admin and it will not install or tell me the problem. What should I try?

  I think that if the application only problems with Easy WiFi Radar (and just the installation of it) the chances are low that it is caused by a virus.

• name of the event problem - blue screen

  problem Signature;

  Name of the event problem - blue screen
  Version de l’OS-6.0.6002.0.0.0.768.3
  Local ID - 1033

  Additional information:
  Collection 116 BC
  BCP1 87601008
  8C208D80 BCP2
  BCP3 00000000
  BCP4 00000002

  6_0_6002 OS version
  ServicePack 2_0
  Product 768_1

  Files that describe the problem

  C:\Windows\Minidump\Mini022810-01.dump
  C:\Users\User\AppData\Local\Temp\WER-167170-0.SysData.XML
  C:\\Users\User\AppData\Local\Temp\WER8FA1.tmp.version.txt

  How can I fix it

  Hello

  It's my generic how updates of appropriate driver: (update your video/display driver).

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd
  evening with their own software and drivers and all other main drivers you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable driver facilities in
  Windows updates, that leaves about Windows updates but it won't install drivers
  who will be generally older and cause problems. If updates offers a new driver can
  HIDE (right click on it) and then go get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows connection problems and "Windows could not log in the Windows Event Service.

  September 14, 2014, I installed the hotfix for Windows (KB2590550).

  When I try to log on to a standard user account (not Admin), I would get an error that might say something like "Windows could not connect to the Windows Service Service event".  I click OK and then get a totally blank screen showing on the arrow of the mouse (which can be moved).

  Around this same time, when I was able to connect, I got a "not genuine Windows" pop up.  My windows 7 came factory-installed by Dell (Dec. 2011) and I got no re-imaging, re - install or repair since I got the computer.  I've also been running Symantec Endpoint Protection (version DoD) for 2011 as well.

  When I login as administrator (different account), I get an error "Failed to connect to the Windows Event Service" or something like it in a control bar bubble popup.

  I studied the Knowledge Base, and he said to apply the patch to KB2590550.

  Since then, the question is still common and works (sometimes) when I reset the password for the standard user.  In addition, all updates of the operating system, patches, etc. have failed since then.

  Now, I get occasional blue screens immediately as windows starts to load (just after the initial windows graphics) which triggers a reboot.

  Service Pack 1 is installed.

  Help, please!

  Hello

  Thank you for the update on the issue.

  If the problem still persists I suggest to run the SFC scan to check the integrity of the system and see what it finds.

   

  The sfc/scannow (System File Checker) command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  We can check & repair missing and corrupt files by the following article in the Microsoft Knowledge Base.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:

  sfc/scannow

  
  

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Get back to us with the result of the analysis so that we can offer you additional troubleshooting steps.

  Kind regards.

• Problem of the KeyDown event

  Hi I have a problem using the keyDown event, I want to get the values of the virtual keyboard using keyDown in my custom field, but the screen takes the event when I tried to bypass the keyDown on-screen and return false that it still does not pass through the my CustomField keyDown. Is anyway to do this? Thanks in advance

  I believe that this assertion is not correct:

  «The main methods all the bubble upwards from the field that has the focus...»

  Actually, I think not the screen receives the keyChar first method and will move down as the case may be.  You usually do with a super.keyChar (...);

  So in your code, you would do the following:

  On the screen:

  {} protected Boolean keyChar (character char, int status, int time)
  System.out.println ("KeyChar in the form");
  Return super.keyChar (character, status, time);

  }

  This should mean that he gets on the ground in short, which I assume to be your area.  To make sure that it is Focusable, you would do this:

  public MyFields() {}
  Super. (Field.FOCUSABLE);
  }

  Let us know how you go with it.

• When you try to log on, get error - "the system event notification service has no logon. the remote procedure call failed and did not execute. »

  My netbook will not open a session because it can not find a certain file. She won't tell me the file. and when I try to go to safe mode it freezes... is there anyway I can just read another account another point? the message I get is "the system event notification service does not log. the remote procedure call failed and did not execute. "tips anyone? I care is no longer the files it contains. If I could wipe it off somehow to factory settings then would be too cool. his windows 7 starter edition

  
  Original title: hp netbook to log issue

  You have two options:

  • Perform a factory restore. Check the homepage of the manufacturer for instructions.
  • Start the computer with your Windows XP installation CD, and then follow the prompts. You will have to find the different drivers to match your hardware, for example a driver for SATA hard drive.