called before loading info

Similar Questions

• after updat to the latest version, the peak before the Favorites have disappeared. I think it is called the identity info...

  after update to the last version, the metal spike before that favorites have disappeared. I think it is called the identity info...
  When I go on the site, they will appear on tap, but when I go into my favorites, they are not there, usually they are known after the first visit.
  What bothers me...

  Hi endless121,

  You should take a look at this article which discusses some of the problems with the latest version of Firefox.

  There is some information here that should help you solve your problem. Fortunately, this is a very easy solution.

  Hope this helps!

• Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Hello

  It can help to cancel your iPhone in a Bluetooth headset pairing, if it is currently associated with it.

  -On your iPhone, go to: settings > Bluetooth > tap the info "i" beside your headset > tap Forget this device.

• How can I determine the type of image to be used before loading an image?

  I'm developing an application using VB 2005 which measures two 8-bit or 16-bit image files. When I saw the picture, I find that I have to set the type of image the image buffer before playback of the image in it. For example, if I read a 16-bit image in a buffer of 8 bits, the image is truncated. I guess I could read the image in a 16-bit buffer and retype it if the pixel values are less than 255.

  Is there a better way to do it? Can I determine the number of bits of an image before loading in a buffer?

  Thank you!

  Hi Steverino,

  Olivia is incorrect... VDM has a function called GetFileInfo which does just what you want. It only reads the header of the image but does not load the entire image in memory. It will give you various properties such as the bit depth.

  I think that on the new .NET support, there can exist here: NationalInstruments.Vision.Analysis.Algorithms.GetFileInformation.

  Thanks to the ICB and our legacy of .NET support, it's probably a similar name.

  Eric

• Is it possible to edit photos on a media on my iMac SDHC card before loading on my iMac

  Is it possible to edit photos on a SDHC card using my iMac, before loading the pictures changed on the iMac?

  Yes but it depends on no doubt what application you use photo editing I guess. I use Adobe Photoshop Elements and I can edit directly on the map of the camera if I want and download images to the iMac or elsewhere. I just did as a test on the card from the camera, but normally I upload the images on my desktop first and then go from there.

  Rick

• delay 10s ~ when clicking on links before loading starts

  I have a delay of 10 seconds after clicking on links before loading starts. On some sites, it's worse than on others, the worst being on reddit.com. I tried to reset firefox but that did not help. Thanks in advance for any help.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables some settings and disables most Add-ons (extensions and themes).

  (If you are using an additional theme, place you in default theme.)

  If Firefox is open, you can restart in Mode without failure of Firefox in the Help menu by clicking on the restart with the disabled... modules menu item:

  

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

  Thank you.

• call setup, load or unload the vi in memory

  Hi everyone, I need your help!

  I tried to call sub-vis in different ways:

  Sub1.VI call for installation - load with callers (normally)

  Sub2.VI call setup - refill for each call

  SUB3.VI call setup - load and keep on first convocation

  SUB4.VI call dynamically with "open reference vi.

  in main.vi, a structure of the event and a while loop are used to call sub-vis

  one another while loop (a node inside application property) is used for checking, that vi is in memory

  After having main.vi runs, sub1 and sub2, sub3 are in memory. Is not only sub4. but I think it's a mistake.

  in my mind, sub2 and sub3 must not in memory, because they are not yet called.

  can explain you it? Thank you.

  my English is terrible, I hope, you will understand what I mean.

  
  

• Windows XP has entered a loop, it stops just before "loading personal settings" then restarts so far again and again.

  Windows XP has entered a loop, it stops just before "loading personal settings" then restarts so far again and again.

  It won't let me choose a mode which worked well, it is stuck on "Start windows normally" for 20 seconds.

  Hello

  Restore the system from the recovery console and check.

• Black screen before loading windows

  I watched videos and all of a sudden my computer crashes. I had similar to freeze in the past and I restarted my pc, and that she would go to advanced boot settings, so I was able to start windows. This time I rebooted and the motherboard splash screen came, but before loading Windows logo appears, the screen goes all black, boot advanced settings does not appear this time. The only shot that turned out to do anything is Ctrl + Alt + Delete, which just restart the computer and the same thing happens. I can't get into my bios. I am running Windows Vista 32bit.i do not have a RAID array. Any help will be greatly appreciated and sorry for my bad English.

  There are many possible methods to try to resolve the problem without using Safe Mode. However
  Keep your eyes on it that sometimes get you lucky and something works partially allowing
  Safe mode, and then those that can be completed and access Windows.

  Also use Google search. Black screens are extremely difficult to manage.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Call before all with phone linksys not updated of CUCM online.

  Hello

  We have CUCM 9.1.2 and there is mixture of phones Cisco and linksys.

  When I come to call on the Cisco IP phone, number CFA is updated on line phone CUCM configuration.

  But when I do call before all on Linksys SPA942/SPA962 phones, number CFA is not enforced CUCM phone line configuration up-to-date.

  A feedback?

  Rgds

  Rajesh Kumar

  I can't find documentation to prove this, but I believe that it will not work as you wish. The mechanism that the use of phones IP Cisco to communicate information to the CFA is an owner for the SIP extension, which is blocked on the third-party SIP devices. In other words, RFC3261 does not provide a mechanism to do this. Most likely, the way in which the phone deals with CFA is issuing a REFER message when it receives the INVITATION of CUCM. The easiest way is to be sure of all just take a capture of the two packages the user to CFA and an incoming call while it is on. If she actually uses SEE, you must set the component search space the rerouting on the device in CUCM in a CSS which includes some CFA should be allowed to reach destinations.

  Please remember useful frequency responses and identify useful or correct answers.

• black screen shown before loading an html file big bb10

  Hello

  I have a problem here,

  I'm loading 2 in HTML format as part of my application.

  1 index.html with a video that plays first.

  2. after index.html I load on end of video game home.html.

  problem is here, before index.html load I use rim: splash in bb10

  After index.html, before home.html loading I get a black screen, because it takes time to load home.html as home.html as many sections and loading js files.

  How to avoid this black screen before loading my home.html.

  Please help me.

  by moving the video as a topic home.html tag you can solve this problem :-)

• natviely reading video mp4 using the rim: splash before loading an application webworks

  Hello

  in my application, before loading my home.html, I need to play a video.

  from now on, I use rim: splash, supported in bb10 webworks, that shows a picture of statci prior to loading content home.html.

  but now a new requirement came to play a video before loading the content of home.html.

  but rim: splash supports only, gif, png etc. but not video MP4.

  How to achieve this, please let me know.

  You have to manage in the logic of your application, and not in the built-in splash screen.

  I usually use some sort of overlay as a viewer, and I add some elements, like video, etc.

• TC7 SX20 manually select the Protocol to call before dialing the remote

  Hi, I found that after upgrading my sx20 to TC7.1.1, I couldn't select protocol to call before dialing. If I select recent calls, there is an option called "edit before call", however, when I click on it with remote control, it simply allows for me to change the composition of number but not allow me to choose which protocol to use. I can select protocol to call before dialing on the web interface. How can I choose the Protocol to call during a call with the remote control? Thank you

  Hmm, you're absolutely right, never noticed this before us does not normally use the remote control to call connections. Anyway, been playing with it for a while this morning and not, the memorandum of appeal cannot be specified or changed, only the rate of appeal using the tab at the bottom of the screen. (It's using TC7.2.1).

  Guess the system configuration to use 'Auto' as the default calling Protocol and let the system decide what to use will be your best option.

  Otherwise, you will need to create entries in the local directory through the web gui and specify the protocols etc it.

  Suggest you to contact your local Cisco representative and submit a feature request to make this option available.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Can not boot from my DVD to a format before loading Win 7

  I tried to start my (professional) win7 updated my dvd player, so I can format my C: drive before loading Win7.

  I did the necessary bios change for boot order, I get the message "press any key to boot...". ', but a touch usually takes me to my C: drive boot upward.

  I should mention that I installed win7 on my C: drive but was never an option to format the drive, and now there are still all my old files and the background image that I don't want. Otherwise, the installation went great.

  There is another thread where I was getting help and some good ideas, but he seems to have died.

  See Win7 XP update not did me not the ability to format the C: drive or delete all the old files on this drive on this link for further details.  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Win7-upgrade-from-XP-did-not-give-me-the-option-to/4ca764c3-2f45-4B2F-84b9-808ce96476c4

  Basically, what I want to know is, are SATA drives "to hot' I think the term is.

  In other words do I can unplug the SATA connection on my C: drive, see him if I can then boot in my reader DVD, then in case of success, taking the C: drive in and move forward with the formatting and reinstalling from there?

  Thank you

  You need the C: drive to the DVD player work. I tried this before. Your Windows 7 CD may be corrupted. I recommend you to speak with Microsoft by phone on this problem. Here is ther number (800) MICROSOFT (642-7676).

  Hope this helps!

  Sammy J. Of SammyShane Tech-Center Inc.

• ERROR file binary content get called before writing file site to stream site

  This message in Adobe Muse during the export of the page: error called SiteFile.GetBinaryContent called before SiteFile.WriteToStream

  What is c? I can't export the document and I don't know what to do.

  Help please

  This problem has been resolved with 2015.2.1. You are on the last update? Select help > everything in the application of Muse to find your version number.