callforward busy/no answer to voicemail CCM / unit

Similar Questions

• CCM & IPCCX routing redundancy

  Type of emergency centar, I create

  for technical support and it was essential to be available "25 hours of the day" mission I CCM 4.1.3 cluster with a 4.0.1 IPCCX

  I configured routing CSQ, but want to have backup option routing in the event of failure IPCCX, is it possible to integrate (have some sort of to the front) CSQ with fighter pilot, list and group attacking backup, or staff busy no answer

  Or is it better to have a hunt as first option routing

  What can I do to have these options type of redundant

  Thank you!!

  Vlad

  You're on target, if you only on IPCCX server, you can create a list/Fighter/fighter pilot group online that lists the extensions, and under the CTI Route Point pointing to the Application IPCCX in the cover/Destination towards the front of the non-response and the default enter the DN fighter pilot. Make sure that the CSS of the ITC RP has access to the Partition of fighter pilot, if not then assign correct CSS under the calling search space is filed next to the call before extensions.

  The rate of all messages to the usefult!

  Chris

• Messaging with Nortel PBX unit

  I am currently under a double integration in my transition to IP telephony. In my current sitiation, we run a Nortel Meridian 1 Option 81C PBX as well as Cisco CallManager 4.0. They are both integrated with Cisco Unity 4.0. Our problem is that our IP phones are able to dial * then the extension and leave a message without ringing the phone. PBX users, however, are not able to do. This becomes a growing problem that we're driving on the conversion of the voicemail. A local Cisco engineer hold me it is possible to install it for the for the PBX numbering plan, but opposed our PBX technician. Can anyone send me an example of how to get this feature for all phones. Thanks in addvance.

  Nortel phones have a similar feature with the old voicemail system? Or users see this as a new feature that comes with the migration? On the side of CCM unit, it's really a feature of the telephone system. Unit is not something special for her. From the point of view of unity, calls by * [ext] exactly the same as a call that has been transferred [ext].

  If you can't similar functionality of a Nortel PBX, then here is the closest thing I can think of... define a driver that allows users of PBX to call in the greeting of the opening of the unit (instead of the sign - in conversation). From there they compose [ext] #2. This will take them directly to the greeting [Ext.] without ringing the phone.

  -Eric

• After setting up voicemail on 5 new successfully it has stopped working.  I now get mssg. "setting up voicemail" when I press its icon.  Nor can I change password through settings.  Any ideas?

  After setting up voicemail on 5 new successfully, he stopped after only 1 day.  I now have the message "set up voicemail" when I press the icon of the virtual machine.  Nor, if I can change the password via the parameters, any ideas?

  dukie1 wrote:

  After setting up voicemail on 5 new successfully, he stopped after only 1 day.  I now have the message "set up voicemail" when I press the icon of the virtual machine.  Nor, if I can change the password via the parameters, any ideas?

  You want to communicate with your carrier. Your means of troubleshooting access to your voicemail only unit is extremely limited because it is a managed function of carrier.

  You can try to reboot your iPhone or resetting network settings through settings > general > reset, but I doubt he will bare much fruit. It is more than likely that's going to be a conversation with the carrier that suits him.

• Configuration of business groups

  Hello
  
  In R12, I can't find my business group while creating the operational unit.
  
  1) created a legal entity
  (2) book for elementary school created with currency settings and Options of subledger accounting.
  (3) business group created (with map and Type as "Business Group")
  (4) define Options profile like; HR: Business Group, HR: security profile, HR: User Type
  (5) now when I try to create an operating unit, here I need to pass Business Group whose default value of legal context. Here, I can not find my name of Group of companies that I created and assign the profile options.
  
  Am I missing any installation or I'm in the wrong order?
  
  Imran.

  "Have you added ' free WILL / morals" in your BG. If so check the Identification of the employer. "If you do not add then add ' WILL / morals" in your BG and add the Identification of the employer as well in other functions.

  I hope this will help you.

  Kind regards
  Khan,
  http://moreapps4u.blogspot.com/

• Satellite M60: Display flickers in hibernation in Vista

  All plans when released drivers vista for this laptop? I have installed all the latest drivers for ati x 700 all the last e.t.c of updates but cannot get the standby mode extended and sleep at work.

  Under the hibernation display is flickering as he went crazy, and under sleep it just freezes and never comes out.

  Hello

  I can't give you an exact answer, but if your unit doesn't have Vista capable sticker I think it will be supported for Vista.

• I am interested in the predator AG3-605-UR1H. I have a few questions about it.

  My first question is whether it is possible to buy this model without the graphics card in it. I have a friend who has the same graphics card on his pc and is willing to sell me half price he can pass to a better graphics card.

  My second question is he the same motherboard as the fact of this model: http://us.acer.com/ac/en/US/content/model/DT.SPXAA.022 I would like to know because I think that a few years on the road, I would upgrade to the graphics card.

  I was also interested in this model: http://us.acer.com/ac/en/US/content/model/DT.SPXAA.017

  Why is not available for online purchase? It will be available in the near future?

  inspectorlunge,

  Good questions, let's see if we can get good answers.

  The units in question:

  AG3-605-UR11 / DT. SPXAA.022

  AG3-605-UR1H / DT. SPXAA.021

  AG3-605-UR2F / DT. SPXAA.017

  All our AG3-605 series models come with an adapter installed in them. If you find one of our units that use the same video card you want to get your friend you could use the two together, your overall experience growing.

  Insofar as the same motherboard, Yes, the card mother in all three are the same.

  We have a unit AG3-605 on our Acer store for purchase, Predator G-AG3 - 605 - UR1H Gaming Desktop, if it's where you were looking.

• Activate a call forward with a third party SIP device or an analog device

  Hello

  In a CUCMv9, how do I activate a call forward (all, not busy, no answer...) with third party SIP device or an analog device, connected to a fxs?

  I want to activate call forward like an Alcatel or Aastra PBX with a code.

  For example, I pick up the phone, with the code * 95 followed by the destination number and hang up the phone. And use the #95 to desactivate the call forward.

  Is it possible?

  Thank you.

  No codes for 3rd not part of SIP phones, no way to do it. Or for that matter, not even for Cisco phones, other than the CFA.

  Something other than CFA must be done via CCMadmin or CCMuser to any type of phone.

  For FXS which is not feasible if you run SCCP

  http://www.Cisco.com/en/us/partner/docs/iOS/voice/FXS/configuration/guide/fxssccpsplmft.html

  HTH

  Java

  If it helps, please note

  www.Cisco.com/go/pdihelpdesk

• Administrator of greetings

  The right 4.0.4 Voicemail.There unit seems to be no administrator account on greetings built. Am I correct to assume it must be a generated default account when the unit has been charged as the administrator of the example account? Can it be added through AD? I need the account to administer call them Handlers.Thanks

  Any Subscriber with administrator COS can admin the CallHandlers via SaWeb. For the admin of ACJS phone you EF a subscriber of the unit to be the owner of a call handler and it would be the admin of this Callhandler

  Implementation of greetings Cisco Unity administrator

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_administration_guide_chapter09186a008022d1ca.html#wp1141288

• Deployment of high availability of the IPCC 4.5

  In a future HD architecture implementation, the voice service will provide CallManager 5.0, that will integrate with 4.5 of the IPCC. 4.5 (required with 5.0 CM) IPCC does implement a high availability. How can we ensure that technical support continues to operate if the IPCC goes down? One possibility might be to configure CM such that if the IPCC goes down, all the number of help desk calls are automatically and immediately headed to a group (which includes all extensions help desk). This redirection can be configured in CM? Is there a better option?

  Thanks in advance,

  SB

  This is your best bet. On the road Points for your call center just put the call before busy, no answer and failure to the fighter pilot. Thus, when the IPCC Express Server is down it will sent to your fighter pilot.

  Please evaluate the useful messages.

  adignan - berbee

• Dependent on model MWI signal of translation

  I have overlapping 4-digit DNs, so I created XLate models to allow 4 digits to dial within cities, but the composition between with site specific codes assigned to each city 6-digit. I'm having is with MWIs. I can get the unit to send the string I want, but CCM does not pass through the analysis of numbers with all signs intact. See the attachment for more details.

  CCM = 4.0 (2A) SR2c (cluster of 2 servers)

  The unit = 4,0000 SR1 (unified w/failover)

  If there is a better way to maintain the composition in a DN 4-digit defined unoverlapping the area and use the composition for between 6-digit sites...

  In my view, there is a service parameter in CCM called MultiTenantMWIMode that you must enable. This is mentioned in the guides for the integration of the CCM unit. It is part of the process "To Set Up the Voice Mail Service settings of the server" in the section "programming of the Cisco CallManager phone system.

  Kind regards

  Eric

• Can I define an element of Promotion (BOGO) w/c is the formula in the price list?

  Hello!

  We anticipate using (BOGO) promotion in Advanced Pricing in our requirement business in sales. My question is can I define a free item in Promotion in which the unit price in the price list is using formula? Here is an example of our business requirements:

  Promo A - list Unit 30

  Free items (Get): Point A1, A2 of the element, element A3

  sold

  individual class

  Point A1 - 10 unit list 0

  The point A2 - unit list 20 0

  The point A3 - 30 10 unit list

  * Unit list must be calculated using the formula based on the table above.

  When we create a command line client for A Promo, the Advanced engine Pricing SHOULD calculate the price of every free item according to the formula defined for these elements of the price list (point A1 = 0, point A2 = 0, point A3 = 10).

  Is this possible? Are there other options available?

  The new price in modifier I think will just allow you to specify the new price to be used instead of the price from the price list. I read that I can not specify modifier form of Promotion, I understand it correctly? This should be the best place for calculate us the price of our requirement.

  Thank you.

  I checked this and read the user Oracle Advanced Pricing Guide. I can't use the formula if the type modifier is promotional voucher and line level. I create right now of the workaround is to create line Discount that uses a formula and within the formula, do the manipulation and then pass a new price for each item.

• WITH COUNT and GROUP BY

  I'm counting how many people have registered and COMPLETED a SPECIFIC set of units

  Must have completed all 2 units on the line

  Business - UNITS = ISR and DSW

  Physiology or medicine: UNITS = DFC and XFG

  Accounting - UNITS = DF and FGR

  1 ID enlisted in the operational units and two units of medicine so I would count this ID for each line

  ID 2 made only 1 of each line, so I won't count the ID. Want to only count who have completed all THE 2 units for each line

  ID3 enlisted in two business units then count

  4 ID was enrolled in two business units but fell on a count THAT as long as it isn't BOTH

  CREATE TABLE DAN_PATH
  (VARCHAR2 (12) ID,)
  UNIT VARCHAR2 (12),
  STATUS varchar2 (12),
  LINE VARCHAR2 (12));

  
  insert into DAN_PATH (id, UNIT, STATUS, LINE) values ('1', 'SRI', 'Registered ', ' BUSINESS');
  insert into DAN_PATH (id, UNIT, STATUS, LINE) values ('1', 'WA', 'Registered', 'ACCOUNTING');
  insert into DAN_PATH (id, UNIT, STATUS, LINE) values ('1', 'DSW', 'Registered ', ' BUSINESS');
  insert into DAN_PATH (id, UNIT, STATUS, LINE) values ('1', 'DFC', 'Registered', 'MEDICINE');
  insert into DAN_PATH (id, UNIT, STATUS, LINE) values ('1', 'XCV', ' registered', 'GENIUS');
  insert into DAN_PATH (id, UNIT, STATUS, LINE) values ('1', 'XFG", 'Followed', 'MEDICINE');
  insert into DAN_PATH (id, UNIT, STATUS, LINE) values ('2', 'SRI', 'Registered ', ' BUSINESS');
  insert into DAN_PATH (id, UNIT, STATUS, LINE) values ('2', 'FD', ' registered', 'GENIUS');
  insert into DAN_PATH (id, UNIT, STATUS, LINE) values ('2', 'FGR', 'Registered', 'ACCOUNTING');
  insert into DAN_PATH (id, UNIT, STATUS, LINE) values ('3', 'SRI', 'Registered ', ' BUSINESS');
  insert into DAN_PATH (id, UNIT, STATUS, LINE) values ('3', 'DSW', 'Registered ', ' BUSINESS');
  insert into DAN_PATH (id, UNIT, STATUS, LINE) values ('4', 'DF', 'Registered', 'ACCOUNTING');
  insert into DAN_PATH (id, UNIT, STATUS, LINE) values ('4', 'SRI', 'Coward', 'BUSINESS');
  insert into DAN_PATH (id, UNIT, STATUS, LINE) values ('4', 'DSW', 'Registered ', ' BUSINESS');

  GIVES:

  ID	UNIT	STATUS	LINE
  1	SRI	Registrants	COMPANY
  1	DRF	Dropped	ACCOUNTING
  1	DSW	Registrants	COMPANY
  1	DFC	Dropped	MEDICINE
  1	XCV	Registrants	ENGINEERING
  1	XFG	Registrants	MEDICINE
  2	SRI	Registrants	COMPANY
  2	FDS	Registrants	ENGINEERING
  2	FGR	Registrants	ACCOUNTING
  3	SRI	Registrants	COMPANY
  3	DSW	Registrants	COMPANY
  4	DF	Registrants	ACCOUNTING
  4	SRI	Dropped	COMPANY
  4	DSW	Registrants	COMPANY

  I would like to get 2 queries that to me the line and the County of ID and the other to get me the ID

  LINE	STUDENTS
  BUSINES	2
  MEDICINE	1
  ENGINEERING	0
  ACCOUNTING	0

  LINE	ID
  COMPANY	1
  COMPANY	3
  MEDICINE	1

  Hello

  Let's start with 2 of the application; It's a little easier, and a solution for question 1 can be built on this subject:

  WITH units AS

  (

  SELECT 'SRI' AS Unit, 'BUSINESS' AS a dual UNION ALL

  SELECT 'DSW', 'BUSINESS' FROM dual UNION ALL

  SELECT 'DFC', 'MEDICINE' IN UNION double, ALL

  SELECT "XFG", 'MEDICINE' IN UNION double, ALL

  SELECT 'DF', 'ACCOUNTING' FROM dual UNION ALL

  SELECT 'FGR', 'ACCOUNTING' FROM dual UNION ALL

  SÉLECTIONNEZ « FUBAR », « GÉNIE » DE la double

  )

  SELECT u.line

  d.id

  U units

  JOIN dan_path d.unit d = u.unit

  AND d.line = u.line

  GROUP BY u.line

  d.id

  After HAVING COUNT (DISTINCT of CASE WHEN d.status = 'Registered' THEN d.unit END) = 2

  COUNT (CASE WHEN d.status = 'Loose' THEN d.unit END) = 0

  ORDER BY u.line

  d.id

  ;

  You can create a regular and permanent table for units, rather than use a WITH clause.

  You can get the results desired for the application 1 by a GROUP BY on the results of the query 2, with the exception of a few things.

  Quiz 1 must include all lines, even if no students not completed all units.  To get these numbers 0, we can do an OUTER JOIN.

  In addition, the HAVING of a query 2 clause eliminates the rows of the result set.  We do not want to eliminate lines that fail under these conditions, we just want to know if they do not arrive or not.  To do this, we have the same conditions inside a CASE, not a HAVING clause expression:

  WITH units AS

  (

  SELECT 'SRI' AS Unit, 'BUSINESS' AS a dual UNION ALL

  SELECT 'DSW', 'BUSINESS' FROM dual UNION ALL

  SELECT 'DFC', 'MEDICINE' IN UNION double, ALL

  SELECT "XFG", 'MEDICINE' IN UNION double, ALL

  SELECT 'DF', 'ACCOUNTING' FROM dual UNION ALL

  SELECT 'FGR', 'ACCOUNTING' FROM dual UNION ALL

  SÉLECTIONNEZ « FUBAR », « GÉNIE » DE la double

  )

  query_2_results AS

  (

  SELECT u.line

  d.id

  CASE

  WHEN COUNT (DISTINCT of CASE WHEN d.status = 'Registered' THEN d.unit END) = 2

  COUNT (CASE WHEN d.status = 'Loose' THEN d.unit END) = 0

  THEN 1

  END as finished

  U units

  LEFT OUTER JOIN dan_path d.unit d = u.unit

  AND d.line = u.line

  GROUP BY u.line

  d.id

  )

  SELECT line

  COUNTY (completed) as students

  OF query_2_results

  GROUP BY line

  ;

  I guess just some of your needs.

• MissingResourceException for xliff bundle, same configuration works for the bundle properties

  Hello

  It is seems very little problem but I am not able to understand.

  If I use the resource bundle file properties, I do following:

  1. create the PortalBundle.properties file in the portal package

  2. in the Project Properties, specify the resource bundle properties file as type

  3. in faces - config.xml, add after the entry:

  <>resources-bundle

  Portal base < name >. PortalBundle < / base-name >

  portalBundle < var > < / var >

  < / resource-bundle >

  <>regional-config settings

  en < default locale > - < / default locale >

  < / regional-config settings >

  4. in jspx, I can now use this set of resources:

  < f: loadBundle basename = 'portal. PortalBundle"var ="portalBundle"/ >

  < af:goLink text = "#{portalBundle.YOUR_COMPANY}" id = "pt_ot4" destination = ' / ' "

  inlineStyle = "do-size: x-large;" color: white; "/ >

  everything works very well.

  but I want to use the resource of type xliff (xlf file) group, I made a similar setup:

  1. create the PortalBundle.xlf file in the portal package. It contained the following:

  <? XML version = "1.0" encoding = "UTF-8"? >

  < xliff version = "1.1" xmlns = "urn: oasis: names: tc: xliff: " document: 1.1 ">

  < file = 'in' original source language = 'portal. PortalBundle ".

  DataType = "x-oracle-adf" >

  < body >

  < trans-unite id = "Helpdesk" >

  < source > your business < / source >

  < target / >

  < / trans-unit >

  < / body >

  < / file >

  < / xliff >

  2. in the properties for the project, specified type bundle as xliff.

  3rd and 4th stages are same as above.

  However, I'm surprisingly lack of resource exception:

  java.util.MissingResourceException: can't find bundle for base name portal. PortalBundle, in local

  at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1427)

  at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1250)

  I'm confused what else is necessary for xliff bundle?

  Thank you.

  Check if you have performed the steps below or not?

  Properties-> select Resource Bundle Type of project: like 'Xliff Resource Bundle.

  And the location of Bundle on 'by default the name of the Bundle of project'.

  In my application it works fine.

  Here are the following details:

  In JSPX

  http://Java.Sun.com/JSP/page"version ="2.1 ".

  "xmlns:f ="http://java.sun.com/jsf/core"

  "xmlns:h ="http://java.sun.com/jsf/html"

  "xmlns:AF ="http://xmlns.oracle.com/adf/faces/rich"

  xmlns ="http://java.sun.com/jsp/jstl/core" >. "

  value = "#{adfBundle ['hoque.]}" {[View.ViewControllerBundle']} "/ >"

  In faces-config. XML

  The reference-

  hoque.view.ViewControllerBundle

  var

  For your case, the location is important. is not find the file you want.

  Hope that will solve your problem.

  Kind regards

  Hoque.

• The correct configuration on the redundancy help

  Hello

  We have a VMware ESXi 3 hosts 4.1 with two Equallogic ps4000 infrastructuer, an AIRLOCK and one with SATA drives.

  It is connected with 2 switches, where everything is connected, so redundancy "should" work.

  On ESXi server, we have 8 network ports, in vCenter, we used 2 NICs for the management and vmotion, 2 for iScsi traffic and 2 for network access VLAN.

  Some time ago, one of our switches failed, and all the VM rebooted because they lose the connection, 2-3 minutes later they came back on the use of the other switch, but it should not happen. I did a little research and discovered that perhaps consolidation of NETWORK cards has not been configured no doubt.

  On vSwitch 2 where will my Iscsi traffic, I used a VMkernel port on both network adapters, it should work, right? What have I done wrong? Someone has an idea, what configuration should be placed on the consolidation of NETWORK cards to do this work.

  After a bit of trouble, I clicked on change properties on vSwitch 2, clicked VMkernel port ISCSi, hget to exepotions political in nic teaming configuration. Failover detection network: Link status notification only, switches: Yes, the failback: No.

  When I disconnected the cable, vmwares worked, when I unplugged the swich, RM of vm. I heard when using network cards, should I create the vmkernel ports on this vswitch using redundancy, is this true? I also thought that the ISCSI port group traffic would inherit the rights of the nicteaming, but this happens for some reason any. Someone has an idea of this network which is the best practice, when you configure the redundancy with multiple cards in vCenter?

  Thx for all the help.

  Bit of an old thread, but in the possibility it has not been resolved, here's your answer:

  With Equallogic units, you will need to configure a vmkernel by physical uplink port.

  1 vSwitch

  2 unique physical network (vmnic3, for example vmnic4) cards

  2 vmkernel ports

  -vmk1-> override set failover of vmnic3 active and vmnic4 unused

  -vmk2-> override unused vmnic4 set failover active and vmnic3

  Bind the vmkernel ports to the iscsi hba software and configure storage.  To improve the performance set up frames on all vswitches, switches and vmk.