Dependent on model MWI signal of translation

Similar Questions

• HOWTO: Translation Live in C++ similar to re-translate in QML

  WARNING: To come long post!

  If you've built (or building) your apps BlackBerry 10 Aboriginal stunts with internationalization in mind, then you have probably dotted with QML qsTr() calls and macros tr() C++ code. When your application starts the text wrapped in qsTr() or tr() is replaced by the localized text for the local unit and the language (if defined, otherwise default text is used). This works fine unless you change the language setting on your device while your application is running. Unless you take measures to propagate the change to the language through your live webcam app, the text displayed in your application will not match the settting of language new device only when your application is restarted. QML provides this translation of 'direct' with the re-translation class, which can be used with qsTr() update of translations that soon the language setting of the device is changed:

  Page {   Container {      Label {         id: label01
  
           // ---This label's text will be live translated         text: qsTr("Label 1") + Retranslate.onLanguageChanged      }      Label {         id: label02
  
           // ---This label's text will be static translated         text: qsTr("Label 2")      }   }}
  

  In this example, label01 will be his attribute of translated text live as it is updated as soon as the device language is changed. However, label02 will have only his attribute of text translated when the software is first started and the language changes following while the application is running will not update to it.

  With the help of the re-translation with QML class makes direct translation as simple as the addition of a small amount of code just after each use of qsTr(), but C++ does provide no such convenience. To implement the translation directly in C++ code, it is necessary to call setXXX() for a string with the macro tr() attribute slot once to do the initial translation and then connect the setXXX() slot to an instance of LocaleHandler that emits a signal every time the language (or locale) changes. It's complicated by the fact that the LocaleHandler knows that the language has changed, but he doesn't know which key text to provide openings, it is attached to the then must fix the LocaleHandler signal to an intermediate location that knows what translation of key to use for this attribute, and then emits a different signal with the key as a parameter that must be connected to the slot machine control setXXX() . This means that, for every single control attribute you want live, translate you'll need a separate intermediate location set somewhere, a signal linked to this site and two calls QObject::connect(). For EACH attribute that we want to live translation. Of course, this becomes very ugly, very fast.

  I prefer to use C++ with QML little or not to expose my app pages so I was determined to find a solution that was easier to use than retranslating in QML (or almost) and after some trial and error I came up with a solution that I am very satisfied. The core of this technique is a C++ class called LiveTranslator. The syntax to use is a bit more complicated to use QML re-translation, but as re-translation you only need to add a line of code for each attribute that you want to translate live. Here is the header for LiveTranslator:

  #ifndef LIVETRANSLATOR_HPP_
  #define LIVETRANSLATOR_HPP_
  
  #include 
  
  using namespace bb::cascades;
  
  class LiveTranslator: public QObject {
      Q_OBJECT
  
      QString _key;
      QString _context;
  
      static LocaleHandler* _localeHandler;
  
  public:
      LiveTranslator( const QString& context, const QString& key, QObject* target, const char* slot );
      static void setLocaleHandler( LocaleHandler* localeHandler );
  
  private slots:
      void localeOrLanguageChangedHandler();
  
  signals:
      void translate( const QString& string );
  };
  
  #endif /* LIVETRANSLATOR_HPP_ */
  

  .. .and the body...

  #include "LiveTranslator.hpp"
  
  // ---Initialize the locale handler pointer on app startup so we can tell if it has been set properly later
  LocaleHandler* LiveTranslator::_localeHandler = 0;
  
  // ---Note that the target control is also used as the parent so the live translator dies when the control does
  LiveTranslator::LiveTranslator( const QString& context, const QString& key, QObject* target, const char* slot ) :
          QObject( target ) {
  
      bool success;
      Q_UNUSED( success );
  
      // ---Save the context and key string
      this->_key = key;
      this->_context = context;
  
      // ---Die (during debug) if the locale handler hasn't been set properly before use
      Q_ASSERT( LiveTranslator::_localeHandler );
  
      // ---Watch for locale or language changes
      success = QObject::connect( LiveTranslator::_localeHandler, SIGNAL( localeOrLanguageChanged() ), SLOT( localeOrLanguageChangedHandler() ) );
      Q_ASSERT( success );
  
      // ---Trigger specified slot when locale or language changes
      success = QObject::connect( this, SIGNAL( translate( const QString& ) ), target, slot );
      Q_ASSERT( success );
  }
  
  void LiveTranslator::localeOrLanguageChangedHandler() {
      // ---Use the specified slot on the target to update the appropriate string attribute with the translated key
      emit translate( QCoreApplication::translate( this->_context.toLocal8Bit().constData(), this->_key.toLocal8Bit().constData() ) );
  }
  
  // ---This function MUST be called once with a valid LocaleHandler before any LiveTranslator classes are instantiated
  void LiveTranslator::setLocaleHandler( LocaleHandler* localeHandler ) {
      LiveTranslator::_localeHandler = localeHandler;
  }
  

  LiveTranslator encapsulates all the ugly stuff, including remembering the key to the translation, the intermediate signal/slot, and all signal/slot connections necessary for direct translation. Use is as simple as creating an instance of LiveTranslator, passing the constructor the translation for the attribute key (and the context, but more on that later), the Visual control of the target and the location on the control that accepts the update of translation. Note that tr() only works with static keys chains...

  // ---This is valid
  QString str1 = tr("string one");
  
  // ---This is not!
  Qstring str1 = "string one";
  QString str2 = tr(str1);
  

  .. .so instead tr(), LiveTranslator must use QCoreApplication translate() internally.

  An example of use of LiveTranslator :

  MyClass::MyClass() {
      Label* label = Label::create().text( tr("Label one") );
      new LiveTranslator( "MyClass", "Label one", label, SLOT(setText(const QString&)));
  
      Option* option = Option::create().text( tr("Option one") ).description( tr("Option one description") );
      new LiveTranslator( "MyClass", "Option one", option, SLOT(setText(const QString&)));
      new LiveTranslator( "MyClass", "Option one description", option, SLOT(setDescription(const QString&)));
  
      ActionItem* actionItem = Option::create().title( tr("Action one") );
      new LiveTranslator( "MyClass", "Action one", actionItem, SLOT(setTitle(const QString&)));
  }
  

  Note that there is no need to save a reference to the new instance LiveTranslator since the constructor sets the 'target' as a parent control. When the control is destroyed by your app the LiveTranslator will go with him. The first parameter to the constructor LiveTranslator is the 'context' where the translation key. When you use the macro tr() (or function qsTr() QML) the code parser mentions of where he found the key and stores it in the translation file. This way you can use the same key for translation on different pages, and if the context is different, you could have them translated differently. The parser doesn't know anything about the LiveTranslator class but it must indicate the context explicitly. For C++, the context is always the name of the class containing the code that you are translating. In addition, in case it is not obvious, the "key" parameter must be the same value used with tr() on the input line.

  There is one thing that you must do before using LiveTranslator in your C++ code and that is to give it a LocaleHandler to work with. Rather than force you to spend a LocaleHandler for each instance of LiveTranslator, you tell LiveTranslator that one to use only once with a static function call. If you created your application from one of the Momentics models then you already have a Manager, you can use:

  ApplicationUI::ApplicationUI() : QObject() {
      // prepare the localization
      m_pTranslator = new QTranslator( this );
      m_pLocaleHandler = new LocaleHandler( this );
  
      // Use this locale handler for all the live translations too
      LiveTranslator::setLocaleHandler( m_pLocaleHandler );
  
      ...
      ...
      ...
  }
  

  I enclose the source for LiveTranslator so all you need to do to get the direct translation working in your BB10 native C++ code is extract the zip in your src directory, add a call to LiveTranslator::setLocaleHandler() in your main application class constructor, and then call new LiveTranslator (...) with the appropriate settings for each attribute of the control you want to be living translated. I hope that is useful to the native BlackBerry 10 development community wonderful (and long-suffering).

  IMPORTANT!

  The instructions posted above have been extended and improved to work with some additional user interface controls such as SystemDialog and SystemUiButton. It was published with a link to a sample application on GitHub as an guest article on the Blog of Dev of BlackBerry. Additional functionality has been added to the original code shown above, then the blog article and GitHub example now consider the definitive description of this technique.

  See you soon.

• Veristand Simulink model initialization

  VeriStand 2013 has now the ability to initialize the settings of the Simulink model (reference: signals and initial Conditions in a Simulink model mapping).

  The question is: is it possible via API in LabVIEW calls?  I would like the user to be able to select the name of the initialization file in my host code.

  I have a temporary workaround to have the file name selected by the user copied to a temporary location / name defined in VeriStand System Explorer, but it is certainly not an elegant solution.

  Currently, the only way to change the parameter values by default for a system definition is:

  1. update the system definition to point to a different file.

  2. switch to update the contents of the file that is already stated in the system definition.

  #2 looks like the simpler approach recommended for your use case.

  One thing that might make your solution a little easier would be to use the index function in the template parameter initialization file. What you can do is the following:

  1. (optional) create. that various pattern files of calibration in advance you want to test. Name them sub1.txt, sub2.txt, etc. (or name them as you wish).

  2 configure your system definition to point to a calibration of empty template file named Main.txt.

  3. prior to deploying your system definition, change the main.txt file to add the following line (assuming that commas here because it's hard to type tabs in a web browser):

  Subscript,c:\whatever\sub1.txt

  You can also have multiple index files if you want to mix and match. Simply add extra lines.

  The advantages of this approach are:

  (a) you can easily use the pre-established model calibration files.

  (b) you don't have to copy the files autour

  (c) the write file you need to do before you deploy is very very simple.

• Detect a noisy signal

  Hi all

  That is the most effective method to differentiate a noisy signal of normal. The application receives signals and it should be able to determine if the signal is disturbed or not pragmatic. There also a value of threshold for spikes in noise that it must consider.

  Thanks for your time in advance.

  Concerning

  IB...

  I agree that the answer depends on what your signal looks like, but it wouldn't be difficult to determine if a signal is noisy. If your signal of interest is sinusoidal, you could do a FFT, then threshold levels other than your target, as a basis for comparison of noise signal. It is quite effective. If you have something that changes a little, like audio or data, here again, you might look at the spectrum, but look outside a frequency band and not only a single frequency. If you have a reference signal, you could subtract the received signal reference signal and the result would be your noise and you could measure it. This all happens to determine the quality of the signal, using filtering will help you clean it up, but not tell you how noisy, it is first of all.

  Hope that helps.

  Chris

• XLF file for Excel BI Publisher 10.1.3.4.2 models

  Hi all

  Can someone explain how we generate the translation file of Excel in BI Publisher 10.1.3.4.2 models.

  Best regards

  gt1942

  Please note that only the following types of models are supported for translations

  RTF models

  RTF models

  Style RTF models

  BI Publisher model (.xpt)

• Why substitution strings are now old value in application translated even after seed/publish?

  Hello

  Recently, I noticed a small, but from the perspective of our customer "big" issue. We defined in our application, some chains of substitution to keep more detailed information about the version of the application. Later, they are used in page templates to display information to end users. Recently I had to update the value of one of the chains of substitution. The change is immediately visible in the main application. Unfortunately, it is not the case for the translated application. For some reason the old value is retained. Even after doing the "seed"-> "Apply translation file"-> "publish." It is keeping the old value. I tried to use the "Translatable" checkbox in the model. In the translation file, is to show correctly the substitution in the 'source' and the tags string 'target', but still he is resolved to the old value.

  We use the APEX 4.2.2.00.11 running on 11g.

  Waiting for suggestions that maybe it's me forget somewhere extra time "checkbox. Thank you in advance.

  Greetings,

  kempiak

  It was my mistake. Value of the substitution string is included in the translation file. I changed it it and it works perfectly.

  Greetings,

  kempiak

• SQL Datamodeler: engineer to the relational model: the column names

  Hello
  Suppose I have an attribute called DAY OF BIRTH. Is there a way I can préconcevoir this attribute to a name column DAY_OF_BIRTH?
  
  (I know you might have a column name 'birth day' but is not what I want)
  
  Best regards Erik

  Hi Erik,

  (1) you should check the separation settings in general options > Naming Standard - it should be 'space' for the logic model and "underscore" for the relational model;
  (2) ' apply the translation of the names of "must be selected in the technical dialogue

  Best regards
  Philippe

• Qosmio X 770-107 - 3D transmitter must be installed to get 3D

  I have a Toshiba x 770-107 and nvidia 3D Vision 2 glasses.
  I've had this laptop before and all I had to do was turn on the glasses and they worked.
  Now, with this new laptop, I had to install and connect this transmitter via USB to get 3d to work.

  Why can I not connect the glasses without it, as I have before?
  Are there templates within the 770-107 x models, and I bought an older one? Or do all 770 x built in transmitters. Would be - this associated screen? I have a dead pixel?

  I also suffers from the gpu limitation by playing video games.
  How can I fix?

  Thank you.

  > Also I suffer the gpu limitation by playing video games.

  The BIOS update would solve this problem, as already reported in this forum.

  > Are there patterns within patterns of the 770-107 x, and I bought an older one? Or do all 770 x built in transmitters.

  It depends on model of laptop that you bought.
  Some 770 X supports an internal IR transmitter.
  As far as I know the infrared transmitter Interior 3D vision must be placed on the right side near the internal webcam built as part of the screen. The infrared transmitter sends the signal to wireless 3D glasses.

  By the way: the 3D glasses can be used to approximately 40hours. Then, the battery is empty and must be loaded. The USB cable supplied with glasses allows you to recharge the battery of lenses. (light flashes orange during charging)

• Max RAM decision-making supported on the HP 250 G3

  Hi all!

  I intend to 'upgrade' to Windows 64 - bit of the current 32 bits that I use. The reason is that I need more RAM.

  However, I do not understand the maximum RAM supported by my laptop. Can you please translate this for me:

  MEMORY
  Standard
  DDR3L SDRAM (1600 MHz/1333 MHz)*
  One SODIMM slot supporting single channel* SODIMMs
  Standard memory up to 8192MB
  Maximum
  Upgradeable to 8192 MB with optional 8192 MB* SODIMM in slot 1
  * Maximum memory speed supported is 1600 MHz, but it will be downgraded to 1066 MHz for systems running the Celeron
  N2815 processor.
  NOTE: Due to the non-industry standard nature of some third-party memory modules, we recommend HP branded memory to
  ensure compatibility. If you mix memory speeds, the system will perform at the lower memory speed.
  *Maximum memory capacities assume Windows 64-bit operating systems or Linux.
  

  I can't really say if 8 GB is the maximum. or if I put 8 Gb in each slot.

  Thank you!

  Hello

  The information is for MANY models or products and according to the REAL product/model of your laptop specs. Repair says:

  housing for customer memory module accessible/upgradable 1 or 2 (depending on model)
  Support of the DDR3L-1600-MHz dual channel
  DDR3L 1333 MHz Dual Channel Support (downgrade DDR3-1333 DDR3-1600)
  DDR3L-1066-MHz Dual Channel Support (DDR3-1600 downgrade of DDR3-1066)
  Supports up to 8 GB of RAM in the following configurations:
  ● System total of 8192 MB memory (8192 × 1.) or (4096 x 2)
  System memory total 6144 ● MB (4096 × 1 + 2 048 × 1)
  ● System total of 4096 MB memory (4096 × 1.) or (2048 x 2)
  ● total 2048 MB system memory (2 048 × 1).

  Cofusion more isn't. Please use the following site to scan your machine. It will tell you exactly what you need and where to buy, or you can also use the information to buy elsewhere:

  http://www.crucial.com/USA/en/systemscanner

  Kind regards.

• Wireless mouse works intermittently

  My mouse, intermittently, works, or it, glitches and does not at all.  I have a NEW mouse to see if this corrects the problem.  No, he didn't.

  My NEW mouse: Blackweb Bluetooth wireless mouse, model number: BWB15HOo213, S/N: PRDMU36.

  My OLD mouse: Logitech M310, P / N: 810-004004, S/N: 1501LZ6ELA8

  My old mouse glitched, as described, and so I decided to get the NEW mouse.  SAME QUESTION for the new.

  What is the problem?

  Wireless mice are more trouble that it be put in place with.  First recommendation is of use a cable.

  Wireless mice are common problems, because they depend on a radio signal between it and a receiving device.  If a device has a low battery, you will have a problem.  The radio signal between devices is very low and depends on being close enough and especially no radio no signal interference.  The signal interference can come from many sources, but the computer itself can be the worst offender.  Try to move the receiver close enough (a few inches) with the mouse and see if that helps.

  In your case, it looks like interference.

• iPhone battery draining fast

  My iPhone of 6 battery go down 1% all ~ 15 seconds. After 67% it as abandoned and goes up to 20%. At first, I thought it was the beta, so I restored it to the last public update (10.0.2) I restored my iPhone 2 times now and my battery still drains like crazy. I don't think it's a battery problem because it turns off whenever it wants. I noticed something weird however. Whenever I try to reset soft, a deformed glitchy screen opens before he died. Whenever I do this it changes color (red, gray, green). Please help because it is impossible to use my iPhone for more than 3 hours.

  Hello mannycavs123,

  Thank you to raise your iPhone battery here questions in Apple Support communities. I understand how it is important to have the power and portability. I'll be more than happy to offer some things for you to check.

  The first thing we want to make sure that all of your data on your device is safe. You can have a backup, but please do a recent experience before you start troubleshooting. You can perform a backup in iCloud or iTunes using this article: the backup of your iPhone, iPad and iPod touch

  Once you know that your data is safe, I recommend that you check two things that can help extend your battery life. Is first called Wi - Fi help. When you encounter low signal strength time when you are connected to a wireless network, this feature allows your device jumping to the cellular signal so that your data will not be interrupted. With the switching signal, you will use more data, and depending on your cellular signal, it can also use more autonomy. This Help article talks about WiFi help: Help on Wi - Fi. I am personally in a great wireless signal box almost everyday, so I have this setting disabled. It can help to increase the autonomy of the battery you want to do.

  The second recommendation, I can offer is to disable any applications using cell phone that you should absolutely not. This Help article discusses this: on the cellular data settings and usage on your iPhone / iPad. For example, I do not personally that I've never used the compass. Disable this access to cell data. Because he needs to send and receive data to keep the data when you open it, this will use the cellular data more. A signal, or whatever it is using cellular data more cost more autonomy. The best part of this is, if I'm in an area without wireless and suddenly need my compass, I can go back to these settings and turn it back on. This is why I personally most of these applications disabled except things like phone, mail, Messages, cards, and everything I need to use on a daily basis, even if I go to a wireless network. This can also increase your battery life.

  In addition, you can take a look at what applications use the most out of your battery and adjust its use accordingly.  Take a look at this link for more information:

  On the use of the battery on your iPhone, iPad and iPod touch

  Thanks again for checking out Apple Support communities and have a great rest of your day.

• Is it possible to change the default channel strip settings?

  Is it possible to change the default channel strip without having to depend on models?

  For example, I always wish to have:

  • Follow the value Name = 3 lines instead of the default line 1.
  • 'Follow the icons' checkbox deselected
  • Always follow box color
  • Control surface Bars always deselected

  Stuff like that... This apples to any screen that is affected by the Configuration of channel strip window. (View mixer or titles).

  Thank you!

  Is it possible to change the default channel strip without having to depend on models?

  NO.

  But why not use a template? You use a template of this moment anyway, the default value of project. Just change and set the Start Action that you configured

  

  Fact

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Pro Tips: Troubleshooting scan to E-mail questions in e-all-in-one printers and ePrint

  Hello e-all-in-one printer users,.

  If you're reading this, chances are you have a problem of webservices in your HP e-all-in-one printer. If you can not scan to e-mail, use ePrint, or get a code application, this post is for you.

  Many of later vintage (2010 and beyond) Photosmart, ENVY and Officejet series e-all-in-one printers share the same Web services and Wireless features. Within these series printer, you can enable wireless and Web services (ePrint, scan to e-mail, printable sheets) connectivity of the façade do their installation for use with Android, Windows, iOS, Macand Chrome OS much simpler than the old printer models. Of course, when things go wrong or there is confusion about the use of the printer and features such as printing and scanning to e-mail stop working, the correction of these problems is the same in most of the models.

  WebServices are not connected: what affects?

  When the webservices connectivity is lost ePrint, scan to e-mailand pads features will stop working. If you are just getting started with the installation of your printer, the inability to generate a code application (to add your connected HP printer or sign in to Instant ink) can be attributed to not being able to afford Web services. If you are affected by any of these questions, read on. I have some suggestions that might help.

  Ordinary remedies

  • Before set you Web services, make sure that your printer is connected to a network, either via an ethernet cable or Wirelessconnection. Print a report of Network Configuration of your printer front panel (usually this is located under Tools / reports) to confirm an active ethernet connection.
  • If you are connected wireless, touch the wireless icon printer . If you see as connected and there is an IP addresses starting with 192.168... or, 10 grand. If this isn't the case, run the Wireless Setup Wizard to connect you with your network name (SSID) and enter the password wireless you are prompted.
  • Ensure that the date and time your printer settings are correct. You can check and adjust this via the front panel of the printer in most cases and trivia: the printer Web server integrated.
  • Now, with network connectivity guaranteed webservices icon or (depending on model) and try to activate Web services.
  • If you have managed to connect and a leaflet printed, or at the very least, an [email protected] address is displayed on the front panel of the printer, perfect, Web services are now functional. This means that you can now ask your HP printer connected , or use one of the above characteristics *.

  Note that ePrint and scan to e-mail feature are addressed later in this post if you still need help with these functions.

  • If the webservices are always not, try your printer restore default*.

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom @hpeprint.com address that it will be permanently deleted. For more information on custom addresses ePrint, click here.

  Here's how:

  • The printer's front panel, press the Setup/key icon and then tap tools
  • Select Restore to factory settings
  • Note this new printer may contain this setting under the heading maintenance of the printer instead of tools.

  Then, to reconnect to your network (wired or wireless) and try to set a manual DNS:

  Make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer), and then press Enter to go directly to this page. This should take you to your built-in Web server (EWS) printer.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.
  • Note that menu above EWS items can vary in overall models of printers. If you do not see the exact topics that I've listed here, the subtopic you should always appear on the Networking tab.

  Then, press the icon of Webservices or and reactivate your webservices (required for scanning to E-mail, ePrint , and other functions).

  Then, if a scan to e-mail question has led you to this position, tap the scan icon and enter the email address that you want to scan to.  Then, recover the PIN code that you should automatically receive by e-mail and complete your scan to E-mail setup by entering this PIN code in your printer.  Ideally, if you are able to get this good service will be fully functional.

  Alternatively, if ePrint is your main problem and all the above (except for scanning to E-mail steps) suggestions worked, try emailing your printer a print job. If it prints correctly, ePrint is back online. If you are a user of HP ePrint app, the app did automatically detect your printer? If not, go to the application settings and manually add your printer to the app using either ask you code or IP address of the printer. Finally, if you're a printable, user use your favorite applications on the front panel of the printer, or via HP connected.

  There are advanced troubleshooting steps beyond what I posted here and you can find them in the Forum such as displayed by the employees, Experts and members of the community. Start with the basics and if you still can't not to take advantage of Web services from your printer don't be shy to reach out - HP Support Forum's is a great place to exchange ideas and help each other to get the most out of our products.

  Thank you for taking the time to read. If you have any questions or comments do not hesitate to answer.

  All the best,

  Greetings,

  All new users to check in this thread, the first and the main post is a practical resource for webservices connectivity solutions.

  Try all the steps to recommend, as appropriate - if you encounter any problems apart from this I'll be happy to help you.

  Kind regards

• HP OEM Vista restore disks work after installing Windows 7 RC?

  The title of the post pretty much everything says. I would like to try the Windows 7 RC, but I also wish I could go back to Vista, at some point. It seemed that the restore disks did not have a complete reinstall the last time (it resets windows pretty quickly). If I load Windows 7 RC, I'll be able to use my restore disks from HP to postpone Vista on my system?

  Thank you

  Pete

  If your specific working set of restore disks really depends on if they were created successfully; However, a set of disks of restoration work should certainly work. At least with my CL Pavillion DV-4-1287, Recovery Manager also continued to work after an upgrade to Windows 7, then a reinstallation via clean install without shaped.  Initially, he works with none of the additional steps, in the second, I just need to copy the application on of c:windows.old\program files (x 86) \sminst.  Unless you have reason to do so, while a clean install is the best route, I wouldn't do a format with a clean install, since all your drivers are stored in the Windows.old folder and (dependent on model) the swsetup folder.  Windows 7 can not find the drivers for all devices (five in my case) but on my machine all drivers Vista has of worked - just needed to point the manual driver update function to the appropriate folded equal windows.old or swsetup. BTW, while drivers Vista came with my laptop running Windows 7, the same is not true for some recent updates on the website.

  Oh, one last thing would be to update the BIOS before installing Windows 7 from the Flash of the bios Setup program is not yet certified for Windows 7 (no surprise since it's always a BONE development)...

  Stephen

  Message edited by SWY on 01/06/2009 17:45

• Toshiba 40L3453DB does not recognize the hard drive Seagate Wireless Plus

  Hello

  I recently bought a hard drive Seagate Wireless Plus. When I connect the hard drive to my computer, it recognizes it's ok and I downloaded movies, music, etc. on him. However when I connect said HDD on my TV and select the media browser, it comes up with the message "no removable disk is connected.

  I looked online but I could not find an answer for my problem, but I noticed a lot of people talking about the format of the hard drive. The hard drive is underway in the Windows NT file system format.

  Any help is greatly appreciated.

  Gary

  Originally posted by Y44KCM
  

  Hello

  I recently bought a hard drive Seagate Wireless Plus. When I connect the hard drive to my computer, it recognizes it's ok and I downloaded movies, music, etc. on him. However when I connect said HDD on my TV and select the media browser, it comes up with the message "no removable disk is connected.

  I looked online but I could not find an answer for my problem, but I noticed a lot of people talking about the format of the hard drive. The hard drive is underway in the Windows NT file system format.

  Any help is greatly appreciated.

  Gary

  There are known limitations when connecting TVs USB hard drives:
  -HDD format is one of them: FAT/FAT32 should work, NFTS (depending on model) probably not
  -in the manual for this model, only the USB keys are hard disks mentioned, none (which require an external power supply).
  USB drives are USB - bus-powered and therefore does not usually cause trouble, while external power supply used by hard drives can lead to problems, this device is not recognized.

  In short: there is not that you can do, in addition to changing the USB device. You can try with the FAT32 format first, but with some probability that also won't work, except for the fact that FAT32 is supported only up to a certain size of drive.