CallManager connected to Alcatel via SIP

Similar Questions

• is it possible, end point of video recorded in CUCM call standalon SX10 via SIP Trunk?

  Dear all,

  Need help :)

  1.

  is it possible, end point of video recorded in CUCM call standalon SX10 via SIP Trunk?

  my customers will not buy TP - lic :)

  Topology:

  8900 (jabber) - CUCM-(SIP) - SX10

  2.

  Customer, have MCU machine.

  If not possible. is it possible, meeting point of MCU use?

  Topology:

  8900 (jabber) - CUCM - MCU - SX10

  1. Yes, but it is not that simple and straightforward that the SX10 can be reached by calling is the public IP address and CUCM does not support the IP address numbering is not a SIP address format...

  2. Yes, using the MCU would be much simpler, easier and, in my opinion, a better solution to be implemented. Here is an example of how a stand-alone SX10 could dial the IP address of the MCU standard automatic.

  You can also assign a SIP URI address to the meeting point which the SX10 can connect to.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• cannot connect to iCloud via IMAP

  cannot connect to iCloud via IMAP

  so, cannot send or receive e-mail

  iCloud Mail and Notes are in decline, at least for some users: https://www.apple.com/support/systemstatus/

• Satellite Pro P100 - unable to connect to Internet via LAN

  I have a Toshiba Satellite Pro P100. Model no SPSA4A-005002

  I used my recovery disc and erased from my computer, because of a virus and now I can't connect to internet via cable but my wireless internet works perfectly.
  Its quite dead there is no lights on the back of the laptop where I plug in the cable.

  Hello

  Your network card is properly recognized in Device Manager?
  In your case, I would try to update the LAN driver. You can get the latest version here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In addition, you check the version of the BIOS. The most recent version must be installed and load default settings here.

  In the worst case, it s only a hardware problem and must exchange the motherboard together :(

• Satellite L650-11F - how to connect to LCD via an HDMI cable?

  Hello world

  I have the Satellite L650-11F with ATI 5650 and HDMI port and I want to connect the laptop via HDMI lcd screen so that I have some office using 2 * ATI Catalyst * and * software HydraVision, but ATI sites said that Toshiba notebook is not supported (Please check with your mobile phone OEM for support of the drivers for these laptops).

  So, how can I connect my laptop to LCD screen to get 2 workstation?

  Sorry for my bad English :)

  Hi thebluewriter,

  I think you need to check only the other discussions of the forum on the connection for laptop LCD screen. You will find enough about it!

  In any case, most recent display driver you can download on the official website of Toshiba, but usually it s preinstalled on your laptop.
  If you are using a HDMI cable, use just FN + F5 key combination to switch between monitors. All that s! :)

• connect two vi via internet

  Hello

  I have these screws and I need to make a connection between them via internet. the data is sent in the LAN. but I do not know how to connect these internet screws.

  any help please and thank you very much.

  I have a static ip:80.81.xx.xxx

  khaled377 wrote:

  Hello

  Thanks for your reply. for the remote panel connection manager, it seems like a good solution, but not in my case.

  and for the static ip address: Yes, it is the ip of the server. and the client must connect to send data (signal dmm---> dynamic signals). someone tell me try the command ping sataic ip of the client computer? and the result is request expire. I think that's the problem and I'll solve it so wish me good luck gd

  It was good adice you received. Non-routage IP are available only on the local network. Your IT Department will have to help with the IP settings and router.

  Ben

• problem with express mini pci wireless lan card. I can't connect to internet via wifi but I can connect to the internet via cable.

  Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!

  Hello

  Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 2: Troubleshoot wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference: http://forums.lenovo.com/t5/R-and-L-Series-ThinkPad-Laptops/L412-Wireless-Automatically-Disables/td-p/264447

  You can also post your question in the forum of Lenovo to get help:

  http://forums.Lenovo.com/

• How to connect a MAC via RDP machine

  How to connect a MAC via RDP machine from a Windows machine.

  Hello

  I found the solution, you can use VNC viewer to access MAC machine to Windows.

  Steps to activate allow the connection to the MAC

  Go to the system preferences - click Sharing - select Remote management, click Computer Configuration

  Check these two options

  -Any person may request permission to control system

  -VNC viewers may control screen with password (enter password)

  Now the system of windows one can connect using MAC machine IP and the password

  Kind regards

  Durga

• Error: "no connection is available via USB" when you try to synchronize Palm Tungste E.

  original title: problems with my Palm Tungste E and Windows XP

  I have a Palm Tungsten E PDA. I can't synchronize Ho. The Palm shows that no connections are available via the USB port. Palm software only has a connection available in the Installer (Com 1) series. How can I cofigure system to allow me to Hotsync? Thank you very much.

  Hello

  Follow the steps in the following link and check if that helps.

  http://KB.hpwebos.com/wps/portal/KB/common/article/2630_en.html

  Also check the following link for more information.

  http://KB.hpwebos.com/wps/portal/KB/common/article/8594_en.HTML#4

• Computer laptop ThinkPad X4F-not not connect to internet via wifi

  I only am not computer savvy so please keep answers dummied down if possible. I used this laptop last Friday and it starts today and cannot connect to internet via wifi. No problem whatsoever before that. Checked with other computers and devices in the home and the wireless network and internet are working properly.

  Checked this notebook and the wifi is enabled (airplane mode), says its connected to the router (in the connections) but the Scrolls right and said "identification" tray icon Using the LAN works fine. Looked at the wireless card and it says device is working properly and is fully updated.

  This computer is running windows 8, which I still have a problem navigate through the.

  FOR INFO. Lenovo has solved the problem. They refreshed / reset my computer to factory settings and then flashed the video card to install a firmware update.

  It seems that this should be done before they sent me this computer three weeks ago...

• Connecting two routers via a static route

  I have a relatively simple configuration involving a Wireless-N Router and a wireless-B router (several years).  The N wireless router is connected to the internet (via DSL modem) and accepts several DHCP clients without problem.  Wireless - b router is connected to the Wireless-N router.  To do this, I connected the WAN port on the router wireless - b to a port on the router Wireless N ethernet (did not use the uplink). I have a PC connected to the router wireless - b, so I want him to be able to hit the internet, but also be accessible to DHCP clients on the Wireless N router.  The PC connects to the internet successfully, but it does not find clients on the network supported by the Wireless-N router.  It's about my setup:

  B 192.168.55.1 wireless router (LAN) 192.168.56.102 (WAN)

  PC 192.168.55.10 (active dhcp)

  Wireless N 192.168.56.1 (LAN) x.x.x.x (internet)

  (several clients dhcp... 192.168.56.100...)

  I've added a static route in the hope that a computer on the network of the Wireless N router would be able to hit the PC, but nothing helped. I've added a static route as such, on the Wireless-N router, which was the only way that that would enable the web interface:

  Destination LAN 192.168.55.0

  Subnet mask 255.255.255.0

  Gateway 192.168.56.102

  I tried to place the router without wireless - B gateway mode, then router and changed mode, then return.  I can connect to the web interface of the router wireless - b from the PC, and I can connect to the internet from the PC.  Also, the PC is able to reach customers on Wireless N, but the reverse is not true, i.e. clients on Wireless N can't find clients on the wireless - B network. Also, I turned on the port forwarding on the router wireless - B so that it points to the PC, in the hope he would lead all traffic to the PC, but still cannot access PC.  How to configure both routers (or both set up as access point?) so that clients on the Wireless N Router can talk to customers on the wireless router - B?  For now, all customers are on DHCP, but finally, I would like to create static entries for at least two or three of them.

  Thanks in advance

  Are Linksys routers teas? If so what model is router B? It may not supported for a DHCP client port forwarding. Even if you can get the port forwarding to work for a client on router B, it will not work for several clients.

  In addition, if you have the option in router B, disable the SPI Firewall. It is the cause of the problem, in my opinion. If you do this, you should port forward.

  Is there a reason that you connect the routers via the WAN port on the router B? You could uplink using an ethernet port on the B to an ethernet port on the N and avoid all this... You can always configure router B as a point of wireless access for specific customers.

• Cannot connect LGUX300 phone via blue tooth laptop notebook g70 - 257 cl of HG.

  Cannot connect LGUX300 phone via blue tooth laptop notebook g70 - 257 cl of HG.

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  If the above does not correct it contact the phone manufacturer

• Change the line key notify labels via sip

  Hi, I was wondering if anyone knew if the following text was possible. Is it possible to change any part of the config of the series phone Cisco SPA via a SIP notify or similar method. I have an asterisk server, where we have created a system to move a device for extensions without requiring a reconfiguration/reset (in the most anticipated cases for the function, the new phones or complete swaps may or may not require commissioning). The problem with this so that when you move Extension A of device 1 device 2, clearly labels don't update unless you change the configuration via the web gui or commissioning.

  I was looking for a way to change the line key labels without having to reboot via a SIP notify message similar to how you can tell a SPA phone to resync notify its config via sip.

  Research on google seems not to show many results, so I tend to think that's not likely to be possible. So I asked here as one of the last resorts before the redesign on the part of the idea.

  The web GUI is not an option for me due to some phones may be behind various firewalls, proxy or the webgui unaccessable.

  Thanks in advance

  Avoid you SIP inform as well as changing the configuration. But the buttons on the phone are mislabeled.

  I call it serious bug, you have no system for deployment.

  But it seems that you accept such behavior as characteristic of the system that you designed.

  It's your system - your opinion is decisive.

• Cannot connect to Facebook via browser blackBerry smartphones

  I am unable to connect to Facebook via the browser. This problem just started a few days ago that I was able to get on the front page on Facebook. When I go to facebook.com on the browser, I get the error message "a network error occurred. Please try again later. »

  Someone else has this problem? Any ideas on what could be the cause? I tried several reboots my 9700 but the problem remains.

  Thank you

  He solved. I deleted the navigation data and now I am able to connect again.

  See you soon,.

• I have a question, I'm trying to connect my phone via bluetooth with my laptop, but I can not connect, I can not find my phone bluetooth device is a photon with sprint 4g

  I have a question, I'm trying to connect my phone via bluetooth with my laptop, but I can not connect, I can not find my phone bluetooth device is a photon 4g with sprint, if anyone can help me I appreciate it.

  Check with the manufacturer of your celllphone or Sprint to make sure your phone has this feature, and if so, what is needed to get there.  It should be in the documentation for the phone manufacturer or Sprint web site.