How to connect a MAC via RDP machine

Similar Questions

• D1100 HP all in one wireless connection for Mac via wire

  Can my hp d1100 connect via cable instead of wireless? I often have problems with wireless. I see a stain on the printer to connect a wire. Tried to use a thread 4200 hp, they show no results.

  HI AGMorrow2,

  Here is a link that will show you how to configure your printer for a USB Wired connection using Mac OS.

  Your printer can certainly do that. Let me know if you have problems with the steps in the document.

• Satellite L650-11F - how to connect to LCD via an HDMI cable?

  Hello world

  I have the Satellite L650-11F with ATI 5650 and HDMI port and I want to connect the laptop via HDMI lcd screen so that I have some office using 2 * ATI Catalyst * and * software HydraVision, but ATI sites said that Toshiba notebook is not supported (Please check with your mobile phone OEM for support of the drivers for these laptops).

  So, how can I connect my laptop to LCD screen to get 2 workstation?

  Sorry for my bad English :)

  Hi thebluewriter,

  I think you need to check only the other discussions of the forum on the connection for laptop LCD screen. You will find enough about it!

  In any case, most recent display driver you can download on the official website of Toshiba, but usually it s preinstalled on your laptop.
  If you are using a HDMI cable, use just FN + F5 key combination to switch between monitors. All that s! :)

• Connection to Win7 via RDP, using only 2 monitors with monitor 3

  Hello

  I have a computer in my office that is running 3 monitors, I want to connect to my home computer using two monitors via RDP. Unfortunately when I check "use all my monitors" he wants to use all three. I just want to use two of my monitors on my desktop computer to view my session at home. And let an open monitor for work

  So, I tried to change Local Group Policy on my home computer and set "computer ordinateur\modeles to Windows\Services Office userconfiguration\administrative to number of Desktop Session Host\Remote Session Environment\ limit Maximum of monitors ' activate and 2»» When I do this it only allows RDP to use a monitor on my customer's computer. When I set this value to 3 it uses all three monitors.

  I also tried RDP file and using "Use Multimon:i:2" without success as well.
  In short, I want only two screens showing my home office and one of my current desktop display screen.
  Thank you
  -Matt

  Hi Matt,

  This is not possible, that if chosen to use all monitors, it will use what is available.

• How to connect my PC via a cable net to my digibox in my homegroup?

  Original title: how I conect my Pc via elecktric netcabel to my digibox in my homegrop? (I speak Finnish, German, Swedish, English, but not God.

  I want to conect all my /PC/ TV and other things via Wlan Homeworkgroup/Home-net togeter and send and get fiedback form these things.

  (example: Voise and photo bitween PC and TV black exploitation TV thru PC and ect... so with objekts remove direction.)

  Tell to me how I do this automatioseyson abdellah?

  .

  Hello

  I suggest you follow the links below and check the issue:

  Connect your computer to a TV:

  http://Windows.Microsoft.com/en-PK/Windows7/connect-your-computer-to-a-TV

   

  The following links will help you decide if you can use a host group:

  Home Sweet homegroup:
  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

   

  Homegroup: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  If the computers in the House are not having the same operating system, then see the link below:

  Networking of computers running different versions of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  A good source of information on the use of Windows Media Player and Windows Media Center:

  Of Windows and home entertainment logged:
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/default.aspx

   

  I hope this helps.

• How to connect to internet via WiFi network?

  Can someone help me please? I'm desperate to be connected to the internet with my toshiba satellite pro wireless free.
  I had it up and working before but then I lost my connection, I'm normally very good with that sort of thing. Is there a helpful soul out there who could give me a step by step idiots guide how to connect my laptop without cables, etc.

  Any help would be appreciated as I want to use my laptop to its full potential.

  Thank you very much

  Hello

  First of all, you need to know if the wireless network adapter is installed on your laptop or not.
  Also check device manager if the Wlan card driver is installed correctly.
  Then you must configure your WLan router.
  In this case, you should check your manual for the router WLan configuration of this device.

  If you want to connect to the laptop to the router WLan so you must enable the wireless network adapter. Usually the WLan switch on the side of the laptop must be turned on (LIT)
  Then, you go to the WLan antenna with the FN + F8 key combination.

  If everything is on then you should go to network connections, it you have available WLan network properties. Go to wireless networks and select view wireless networks button. You should see your WLan.

  If you have set up the WLan encryption on the router, then you must first set the password to connect to the WLan.

• Satellite P100: How to connect to internet via WiFi?

  I read a post above that says that the sticker on the bottom of the laptop ' wireless network: no w/l ' means that there are no installed wireless.
  I'm fairly certain that my Satellite P100 has installed. I customized my phone, ensuring that I have added wireless for the school.

  I have an on-off switch for the wireless on the case. Also, when I entered a zone wireless for the first time, a program (Q-Connect) came.
  I reinstalled Windows XP and wonder if it is a software that is missing (which has been the case with other similar programs audio).

  This could be the operator error?
  I don't know anything wireless.
  How to connect to wireless internet?

  Hello

  First, you must be sure that your laptop has WLan card to 100%. Go to the Device Manager and check the network adapters section. If you will see card WLan (intel or atheros) then you unit definitely has the Wlan card.
  To use the WiFi network, you must configure your Wlan router. Consult the manual.
  You must then activate the Wlan switch on the side of the laptop and use the combination FN + F8 to select the WiFi network.

  For the other steps, you can also check this forum wireless. Here you will find a lot of descriptions.

• How to connect my laptop via HDMI port to my TV + VGA of Propjector port

  Product number: C6K18EA #ABU, Windows8,.

  I need to connect laptop new mu via its HDMI port to a VGA port on my TV and a projector (at different times),

  I have a cable that connects the VGA port and HDMI port, but the computer does not see the TV or projector.

  Kind regards

  Stewart

  I understand now.

  I'm sorry.

  You must purchase a digital receiver.

  HDMI to VGA.

  This link show how to knit.

  http://www.YouTube.com/watch?v=PCFYSB0g-I8

  A picture of this cable.

  http://cdn100.iofferphoto.com/img3/item/509/259/340/HDMI-male-to-VGA-female-adapter-cable-HDMI-cable-2980.jpg?visavale

  att Cristian.

  If this answer help you click in congratulations to the tanks.

  If you have further questions click Accept as a Solution to close this case.

  Tank you.

• How to connect two computers via HDMI cable?

  Hello

  I need to connect my computer by another via HDMI cable to share files.

  1. are there available for this software?

  2. can I connect a Windows PC with Macbook via HDMI?

  HDMI for the video output, not to transfer files...

  See here for transfer files between a PC and a Mac.

  http://support.Apple.com/en-us/HT1408

• I had upgraded from mac to 10.11.3 & now my printer wireless HP Photosmart D110 All in One Printer is disconnected because of having Mac sleep for a long period of time.   How to connect the mac to the printer wireless?  I have the apple extreme route

  I have a HP Photosmart D110 printer got Mac upgrade to El Capitan 10.11.3.   As I had sleep mac for a long period of time, it seems the printer and computer (Wi - Fi) has been disconnected.   Now I can't print.  Need help reconnecting the mac with the HP wireless printer.

  What happens when you reboot both machines.

• How to connect four counters via Terminal block SC-2345

  Given

  • Acquisition of data USB-6361 mass-termination (Factsheet)
  
  
  • SC-2345 carrier (Manual)
  
  
  • 2 counter inputs: 2 X 4 rotary encoders
  
  
  • 2 counter outputs: 2 PWM signals that modulate the power of benchtop power supply for electromagnets

  I connected 1 Encoder and 2 PWM signals to my acquisition of data via Terminal block of the carrier (see diagram on page 28 of the PDF carrier).

  The encoder requires A, B, Z, 5V and GND terminals, while each PWM output requires a 'signal' and GND line.

  1. Encoder 1:
     Device - terminal A37/PFI 8 sc - DAQ PFI 8 / CTR0 A
     Unit B - terminal C45/PFI 10 - DAQ PFI 10/CTR0 B sc
     System Z - sc terminal C3/PFI 9 - DAQ PFI 9/CTR0 Z
  
  
  2. PWM 1
     signal - terminal sc C40/PFI 13 - OUT PFI 13/CTR1 DAQ
  
  
  3. PWM 2
     signal - sc Terminal A1/PFI 14 - OUT PFI 13/CTR2 DAQ

  Food and mass are connected to the single power supply and several terminals on the ground in the carrier.

  Problem

  I need to connect another Rotary button. I tried to change my setup for the following configuration:

  1 = CTR Encoder 0, Encoder 2 = CTR 1, PWM 1 = CTR 2, 2 PWM = CTR 3

  1. Encoder 1:
     Device - terminal A37/PFI 8 sc - DAQ PFI 8 / CTR0 A
     Unit B - terminal C45/PFI 10 - DAQ PFI 10/CTR0 B sc
     System Z - sc terminal C3/PFI 9 - DAQ PFI 9/CTR0 Z
  
  
  2. econder 2:
     Device - terminal C42/PFI 3 sc - DAQ PFI 3 / CTR1 A
     Unit B - terminal C46/PFI 11 - DAQ PFI 11/CTR1 B sc
     System Z - sc terminal C41/PFI 4 - DAQ PFI 4/CTR1 Z
  
  
  3. PWM 1
     signal - sc Terminal A1/PFI 14 - OUT PFI 14/CTR2 DAQ
  
  
  4. PWM 2
     signal - terminal ? sc / 15 - DAQ OUT 15/CTR3 PFI PFI

  But the carrier Terminal has not I/O additional meter terminals. What can I do?

  • Is there an easy way to reconfigure one of the terminals of the unused carrier in PFI 15/CTR 3 OUT?
  
  
  • Can I use one of the inputs/outputs analog or digital carrier of input/output meter?
    A quick Internet search reveals that this is possible and discouraged to control PWM power supply (which is what I do), so I would use this for encoder input.
  
  
  • If I have to resort to changing inputs/outputs analog or digital to counter i/o, that would recommend you - analog or digital?
    I think I would use a digital input clocked by the software. Is this correct?

  I would be grateful for any insight!

  -Farid

  Attached: photo of all the instrument pinout

  SC-2345 cannot have been made to manage 4 meters, OR helped to support 4 meters!

  It turns out that I could re - route output terminal of a channel by adding a simple 'channel node' block in my VI original, as seen in the example of ' Counter - continuous Output.vi "built-in LabVIEW VI.

  Using this method, I rerouted CTR03 OUT via PFI0 instead of PFI15 since the SC-2345 supports a line of PFI0.

• Office jet Pro 8610: how to connect Officejet Pro8610 via ethernet instead of wireless?

  Hello

  We recently bought Officejet Pro8610, but we can't use it yet.

  Our it team does not print wireless network.

  Thus, we tried to implement the officejet via ethernet with wireless turning-off.

  That's the problem.

  We have disabled Ethenet setting wireless and go-> advanced setting.

  We got a static IP for network printer and tried to manually enter the details and information, but nothing can be saved.

  We checked ehternet port is enabled.

  DHCP does not work either.

  Any suggestion?

  Thank you.

  Problem has been solved by replacing ethernet cable.

  It is curious that the faulty cable has worked with a laptop computer, but did not work with OfficeJet Pro.

  Therefore, conclusion to date.

  When the internet connection is having problems, there is a symptom that manual IP setting doesn't seem to work.

• How to connect a HP722C via Netgear PS101 to a Windows 7 PC?

  When I try to set up the Netgear PS101, laptop computer Windows 7 does not.

  A desktop computer Windows 2000 recognizes the server.
  I also suspect that the drivers for the HP722C may not be compatible Win 7.

  Hi Benin,

  1. What do you mean by "Windows 2000 desktop does recognize the server"?
  2. are you connected to the domain?

  To set up a wireless router, I suggest you try the following steps.
  
  Method 1:
  I suggest you try the steps from the following link on how to configure the wireless router.

  Set up a wireless router

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Method 2: HP722C is not compatible with Windows 7, that's why I suggest to download and install drivers in compatibility mode enemy Windows vista.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Download drivers link:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=14537&locale=en_US&TaskID=135&prodSeriesId=25400&prodTypeId=18972

  Post us the results once you try the steps above.

• How to connect a TV via hdmi on my hp Pavilion p6112p desktop running vista

  I have a sharp aquos TV plugged to my desktop hp p6 and cannot cross a signal to tv

  is there something I'm missing or do not know how to turn on?  I tried to play with the moniter settings and not chance it doesn't matter what kind of help would be greatly appreciated br

  Thanks for the info.  I crushed the computer somehow and ended up having last week get windows 8.   now everything works fine.  Thanks again for your help

• How to connect my iPhone via bluetooth with the mcd289 hi-fi sony

  Hi all

  I feel like this is a stupid question, but I can't for the life of understand me. I have an iPhone running iOS 9.1 5. I just bought a Sony CMT - X5CDB hi-fi Mcd289.

  It has built in bluetooth. I followed the instructions to associate my phone and listen to music from him, but he does not ever appears on the phone as a device for me to choose.

  Any ideas?

  Thank you

  Andrew

  Hi yuley95,

  Sorry to hear that you can't associate your iPhone with your Sony's Hi-Fi speaker. We'll see what can be done to get it paired.

  I would first start by taking a look at the troubleshooting below sketch. Start by making sure that your devices are close to each other, restart your iPhone and speaker ensure that your iPhone is updated to bring them to see each other.

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch
  https://support.Apple.com/en-us/HT201205

  First try these steps

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
  6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connectagain.

  Let me know if it helps.

  Nice day