Camera-gross after Win10 update system remains without connection to the CS6

Similar Questions

• 6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start?  What should do?

  6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start?  What should do?

  My computer is a PC with Windows 10.
  Everything worked well before the Update Adobe Lightroom 6.
  The software was purchased in a shop (FNAC) with software to download map, it is saved in my account (Adobe) with its serial number. Why is this so difficult thing to reinstall Adobe software?
  

  
  

  I apologize for the inconvenience.

  Since it appears and disappears from the Task Manager, it seems that Lightroom crashes.

  We have seen this kind of problem on Windows 10 when Visual C++ Reditsributable 2012 update 4 is not installed correctly, it is necessary to run certain programs. You might have encountered until now Adobe programs that require it.

  Otherwise, there could be another cause of this accident and if C++ installation does not help, then you need to share the event viewer crash logs. See this article for in crash logs: Photoshop Elements Editor Help. How to find the crash logs on to Windows

• WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium

  WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium. It works continuously with a cycle detection, connection, loss of connection; detection, connection, loss of connection, etc... The router works through this cycle, basically acting as if I disconnected and then reconnected to the power to reset, it disrupts my Internet connection to my Wired iMac and wireless, another office to the floor. Paid for Linksys support today and through remote access, he put up a new network on my desktop (iMac). After finishing, the problem still exists. When I told him that the problem had not been corrected, he said just wait an hour or two and it should work itself. She, of course, did not himself. Any ideas out there?

  Nevermind - I seem to have solved the problem with a simple firmware. Funny how the Linksys technician support don't think to ask what version of the router I have or suggest that I should try to upgrade firmware first. However, he is quite good at trying to upsell me for a new router instead of trying to help me solve the problem I had. It makes me want to go buy Netgear next time, thanks a lot!

• Using my laptop without connection to the internet.

  I tried to get on my computer to work on a document. There is no Wi - Fi, hotspots or land lines around so I can get on my PC. What can I do to get to my documents without connecting to the internet to open up my PC?

  Oops... Problem solved. I turned off airplane Mode.

• CC so that he was trying to install updates is unable to connect to the server.  What should I do?

  CC so that he was trying to install updates is unable to connect to the server.  What should I do?   This is what it looks like.

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• How to get the ORACLE_HOME without connecting to the unix Server

  Hi all!
  
  DOE anyone have an idea how to retrieve the ORACLE_HOME value directly from the database (connection to SQL only), without connecting to the server?
  I need to check that the solution works in all types of configurations Oracle - for example, I can find it by running:

  SQL > show spfile parameters
  
  VALUE OF TYPE NAME
  SPFile chain C:\ORACLE\PRODUCT\10.2.0\DB_1\DBS\SPFILERGDB. ORA

  and cut this string "C:\ORACLE\PRODUCT\10.2.0\DB_1\DBS\SPFILERGDB. ORA'-> 'C:\ORACLE\PRODUCT\10.2.0\DB_1', to get the value of ORACLE_HOME, BUT - this will not work on configurations ALL Oracle (most of them, but not all) as the DBA can change the path.
  
  So, you may have a better idea?
  
  Thank you!
  Maayan

  Maybe you can use something like this

  SQL> select file_spec from dba_libraries where library_name='ORDIMLIBS';
  
  FILE_SPEC
  ------------------------------------------------------------
  /u01/app/oracle/product/1110/dbhome/lib/libordim11.so
  

• CS6ServiceManager.exe [after Win10 update] application error

  CS6 Master Collection has worked very well since the purchase a month ago Windows 10 updating forced on my system.  Since then, I have experienced many problems of the internet and now feel of countless failures of product Adobe.  Photoshop launches without giving me the CS6ServiceManager.exe - error message Application over and over again.  Premiere Pro will not launch at all, just finally stops telling me it doesn't "work".  I have rolled back and updated the drivers, I have uninstalled and reinstalled Adobe Master Collection CS6, I deleted the .exe and replaced by the installation, I copied and pasted files .dll from one place to another, I did everything in my power to get this thing started, but now is nothing else than to the useless icons on my screen.  If someone could help, let me know.  I lost a day and a half devoted to trying to fix what wasn't a problem a month ago.

  Your note dll MAY mean a corrupt time

  Win10 DURATION https://www.microsoft.com/en-au/download/confirmation.aspx?id=30679 reinstall MAY help

• WiFi disconnection common in note K4 vibe after first update system

  Will have some problem with my WiFi in note K4. My WiFi automatically disconnect after a few minutes and plug back in, face this problem that my home but another network with my devices works very well with my home WiFi. And this problem occurred after the first update system. Am not facing any problem when connecting to another mobile WiFi hotspot.
  If someone got problem like me then please know me and all those who had the solution please answer...

  Hey friends I have resolve my problem by resetting just wifi router. There is no problem now with WiFi.its works very well.

• After the launch of an updated Firefox tries to connect to the server to update for hours, but can't, even if I am connected to the internet. How can I update in this case?

  I get requests to update for firefox 7.01: if I try Firefox shows me a screen in which it tries to connect to the server to update (during business hours) even if I am connected to the internet: I am able to browse with firefox. I also downloaded firefox 9 but first I can't open it: "there is already a version of firefox open. Second: This version also asked me to update, but still the same problem. I'm new with mac, please help...

  Greetz

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data if you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• KB 915597 Def 1.71.26.0 updated - immediate problem of connection to the network; Intel WiFi Link 5100 AGN is present, "working properly", but "there is no network to connect to."

  My "update journal" indicates that this definition has been installed at 05:47 (Saturday 111/21), the same moment where pages failed to load and the small icon of net showed no link. (I had fortunately been web surfing until - filled bars.)

  This is an update "cannot be uninstalled." I did a restore of the system to the previous Thursday, and then to the previous week, without change in condition. . I powered completely off and on again several times, without success.

  There is a note on the update for http://go.microsoft.com/fwlink/?LinkId=52261 - who takes me to a page with a bunch of stuff on the installation of a BizTalk adapter. (snippet below included) This is way beyond my ability to understand... I DON'T know how to edit the registry, but I don't know what to change, if this ' even common sense.

  The update could have messed with the IP addresses?

  I tried net diagnostics ("no network to connect to"); I tried to add a new network - the 'check' the devices window just sits there...

  (Yes, my other devices connected wireless - works perfectly.) The computer has not been moved from its site)

  (This is a piece of the message I get from the url above)
  "You can use the BizTalk for MSMQ adapter and adapter BizTalk Message Queuing on the same computer. However, given that these two adapters use the same port, you must add an IP address to your computer as BizTalk adapt for MSMQ can use. »

  [1] I bought the Dell in August as 64-bit extensible and Dell sent me a Win7 disc...

  [2] indeed, McAfee came with the machine as a trial version...

  [3] I think I might start by reinstalling the Win7 update...

  A1. The Dell computer came with Vista 64-bit SP1 edition? [Yes/No]

  A2. Your current McAfee application is supported in Windows 7 64 bit? [Yes/No]

  If the free trial version of McAfee is always installed, when the free trial period expire?

  If you have purchased McAfee application, did you do before the expiration of the free trial period?  [Yes/No]

  You never downloaded & run a utility named McAfee Consumer Product Removal Tool? [Yes/No]

  A3. Please do not confuse the upgrade your version of Windows with 'update your computer' (e.g. Windows Update), especially in these forums.

  If you've upgraded to Win7 64-bit, you can't "start over by reinstalling the Win7 [upgrade]." If you want to reinstall Windows, you need to reinstall Vista SP1, and then reapply the upgrade to Win7.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Firefox beta 9, coming continuous update window, click on update, but it nevers connects to the server, the link 'click here for more information' is dead.

  I go about Firefox and click on the updates button control the browser downloads the update, I restart Firefox and behind the browser window is a window that says: it is strongly recommended that update Firefox. It is also a link to get more information about this update. The link is not responding, so I click on 'Next' and connect to the server and it never connects. I let it run all night and it connects. I get this window even after that I updated to Firefox. How can I do that, go away? Is this a legitimate Update window or something try to redirect to a malicious site?

  In fact, the window just jumped upward once again, as I was typing this message.

  If there are problems with the implementation at day then best is to download the full version and uninstall the currently installed version and remove the Firefox program folder to remove all remaining files.

  Download a new copy of Firefox and save the file to the desktop.

  • http://www.Mozilla.com/en-us/Firefox/all-beta.html

  Uninstall your current version of Firefox if possible and delete the folder of Firefox beta program to remove all remaining files.

  • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Boxes wireless printer work without connection to the modem HP 6700 printer

  My printer is located on the second floor of our House. It is connected to our network with the modem and the router to the first floor where my wife's computer. This connection works fine.

  My problem is that my printer only works if connected to my computer with a USB cable. This limits the use of a number of functions of the printer. Print the test pages that I myself say the printer is connected to the home network, but the printer will not work without the USB cable that turns off the Wireless function.

  Most of the instructions I've read show that I need to be connected to the modem downstairs to work. It is not possible that I can tell.

  Is there a way to fix this? or is a wireless connection to my printer not possible with this configuration?

  Thanks for your help

  Bill6700

  Bill,

  Welcome to the HP Forum.

  You don't mention what kind of computer of mystery that you have and try to use the printer.

  Assuming that the full feature software is available for the operating system of your computer, this may solve the problem - multiple computers can print once installed wireless printing software.  I hope that your computer is among the supported systems.

  General instructions to install the printer software

  Reminder:

  1. In most cases, the Solution Center has been replaced by the wizard of the printer.
  2. Shortcuts to the Printer Wizard must be installed on your desktop during the last part of the installation.

  Windows operating system:

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  • Open printer HP Officejet 6700 Premium e-All-in-One - H711n drivers
  • Enter your operating system the menu drop-down
  • Click NEXT and scroll down
  • Find the driver - product Installation software category
  • Select the driver of base, e-print, or full software functionality
  • Save the package *.exe Setup on your computer

  The files will probably save in the "folder"downloads. "

  Don't forget to search for updates as necessary for your installation. If available, you can download print and scan doctor and / or other programs of category - utilities.

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  • Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
  • Scroll through the list of videos back until you find the video that best fits your situation.
  • If you use a USB connection: download and install the driver software before connecting a USB cable.
  • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
  • Once the initial installation is complete and functional, check / install category - updated

  There is valuable information about the Web site, including your Manual, sections for Troubleshooting > How-to's, Troubleshooting > solving a problemand alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• 24.7.0 update link does not connect to the update server

  FirefoxESR 24.4.0 was packaged with Debian. For several days, I got a pop-up message to install update security, 24.7.0. The link from Firefox Mozilla says that I have the most up to date version (24.4.0). Manager software apper said that everything is up-to-date. Whenever I click on the link to install on the context menu, the download window stays on the screen «connection to a server to update...» "indefinitely, never connect. Firefox and everything works fine, there is no apparent end this reason why connection should not take place.

  I will close the loop on this issue because I found a simple solution and it seems that a number of other people have the same problem. The essence of this method appears on a number of sites. I extract the key pieces of superuser.com . Linux Mint is a version based on Debian and this deposit has Firefox V32. This method loads and installs from there with a few commands.

  First of all, you keep the current profile and remove the current version of Firefox. Use the file manager to temporarily rename the profile directory home/.mozilla/firefox to something like home/.mozilla/firefoxsave. Use the software Manager to uninstall Firefox 24.4 and he will ask all of the associated files can also be deleted. Theoretically, you can do this with a terminal command, but my installation had trouble with a kind of confusion of name with Iceweazel even if that has not been installed.

  Use the file manager to open/etc/apt/sources.list. There is a provision under the other software to add a repository. In this box, paste:

     deb http://packages.linuxmint.com debian import
  

  and close the file. From the terminal:

  get the public key (paste these lines):

     sudo gpg --keyserver pgp.mit.edu --recv-keys 3EE67F3D0FF405B2
     sudo gpg --export 3EE67F3D0FF405B2 > 3EE67F3D0FF405B2.gpg
     sudo apt-key add ./3EE67F3D0FF405B2.gpg
     sudo rm ./3EE67F3D0FF405B2.gpg
  

  Then:

     sudo apt-get update
  

  Now you can install Firefox either with another command:

     apt-get install firefox
  

  Or use the software Manager. Research on Firefox. The V32 now appears with the 24.4.

  After installation, return to the Firefox profile directory. There will be a new named a firefox created by the installation. Rename or delete this one. Then rename the original back to firefox directory. Use the file manager to go back and open /etc/apt/sources.list and uncheck the entries in Linux Mint. Then restart.

• HP Pavilion Notebook 15-p119: Windows 10: since the execution of Windows update, I can't connect to the wireless network

  Hello, HP assistance.

  I'm having a problem with the connection to my home Wi - Fi network. I am sure the problem has nothing to do with my material and is a problem of Windows only.

  Here's the story: I was fortunately with the Internet from the network before and Windows was connecting automatically every time. But since the Windows Update recently it does not connect. Sometimes it says "unable to connect to this network" and then sometimes it comes up with a box asking me to enter a user name and a password. The thing is... I've never set up a password in Windows for Internet access, so I do not know why he was asking me now. I looked around the Internet via my Tablet (which is connected to the same Wi - Fi network fine, with my phone) and found that it is a common problem. And yet, none of the solutions work for me.

  I wonder if the solution is somehow change the settings so that a password is not required to connect to a network. Or maybe enter a default user name and password when the box appears again. That said, the box did not come for a while.

  Help, please!

  Thank you for your query.

  I understand that your mobile phone works well and you didn't have any problems with your wireless connection. After the upgrade to Windows 10, your wireless network is intermittent and will prompt you for a user name and password.

  The guest is not the Internet, but rather to join your network. He is looking for the network name and password.

  When I did a search for HP laptop 15-p119, I was unable to locate this model. Would you please check your model? How can I find my model number or product number?

  After the upgrade to Windows 10 did you all your Windows updates?

  Sometimes it fails to be installed automatically, if you can try running the Troubleshooting of windows update. to maybe gain others.

  You run the HP Support Assistant since the upgrade?

  If the problem persists, once you have established a test of Wi - Fi automatically update drivers Device Manager wireless.

  • Right click on the Windows button in the bottom left corner, then choose Device Manager

  • Click network to expand the list

  • Right click on the wireless adapter and choose put updated driver

  Select "Automatically search for updated driver software" this month may start a download to install a newer driver.

  Here is a link that can also help. HP PC - troubleshooting wireless network and Internet (Windows 10) 

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to resolve your problem as " ""Accept as Solution"" " to help other members of the community!

  "To show recognition for my efforts, please click on the" ","inch Up Icon " below.

• After installing winows xp SP3, cannot connect to the network wireless at home

  My daughter has an old windows xp pc. I have a USB wireless adapter attached to it to our wireless here at home. When I install SP3, the network card does not connect to the network.  I have uninstall xp3 to make it work. I even reinstalled the software for the card after xp3 installs, and it still does not work. What can I do about this problem?

  Go wireless adapter manufacturer and obtain an updated driver, then it should work. If the manufacturer does not, for a search on the Web.