Camera integrated, not in connection with an application

Similar Questions

• Vista not recognize / connect with any Bluetooth device

  Vista not recognize / connect with any Bluetooth device. I have the Bluetooth dongle into a good usb port, the computer recognizes it, but it doesn't show up

  Bluetooth devices when the device will attempt to connect.

  Is that what you would please stand out my answer as the answer to your problem.

  Marked as answer questions don't get a lot of people looking at them.

  Sorry that he had not helped you.

  Once you disable the my answer option, others will look at your problem and we hope to help you.

  See you soon.

• Re: Portege Z30: Fingerprint software does not, the connection with the sensor fails

  Hello to you all,.

  I have a great fun for you guys. If you're curious, it's here...

  I just bougt garage a portege Toshiba Portege Z30t-A-126 PT24CE-01400HFR
  Nice machine but SSD is too small, so I changed the original SSD 256 to a 512.

  Reinstalled Win7 completely without any pb.

  Just a pb in fact: the footprint software does not work.
  When I hliant, it fails and says "unable to connect with the sensor.

  In french "fingerprint recognition."
  Unable connect the sensor.

  But when I check the Device Manager computor it says that everything is in place and ongoing execution, validity (WBF) (PID = 0010) sensors works very well and the latest version of the driver is installed.
  (I downloaded the form driver toshiba Web site.) The name of the driver is fp - sw - 20140115084521.zip)

  Then? What's not?

  I spent hours searching the web and tried everything I could. Reinstalled a thousand times the drivers, software, tried other drivers... But there is no way that I can fix it.
  It's really annoying...

  Can someone help me please? Have you an idea? I'm stuck...

  Thanks in advance. :-)

  Hello

  This issue of the fingerprint has been described in another thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=81261

  You should be able to solve the problem installing the chipset driver.
  Another user said, an installation of Proset Ethernet drivers/software was necessary to get the problem resolved. But to be honest that I put t think that missing Proset utility would cause the question

  However, check it out.

  Your comments would be appreciated

• BlackBerry Smartphones suddenly unable to use a Wi - Fi connection with any application

  Hello

  This morning, I wad able to download podcasts on Wi - Fi using an application called PodTrapper. Since his return from work and Wi - Fi connection, I can't use any application to access the internet. Twitter, Podtrapper, BlackBerry App World, Evernote, DropBox, all indicate, I can't connect to the internet. However, the browser works very well and I'm typing this message forum about this.

  When I turn on Wi - Fi, I turn off my cell radio, but I enable data and also roaming Services. I don't have a data plan. I did not go to software update on my phone today (I have experience on my Torch 9860)

  Would be great if someone could point me in the right direction to solve this problem.

  Thank you!

  I tried this time to the office.

  He did not work at first, then I started to do a battery pull and it seems to work. I can download podcasts via PodTrapper and connection via Evernote.

  I will try to access the internet at home and I hope that this problem will be solved.

• 4500 envy: Envy 4500 not WiFi connection with numere end

  (Same problem with my other laptop running Windows 7)

  through Wifi or with a USB cable (drivers custom ' settle)

  Installed with disc or by download, same problem

  Can not install printer on laptop computers.  Get to the final stage, the last time I did all the things someone did on the same issue in type - uninstalled software, reset wifi on printer, router disconnected, boot etc... did not fix it.

  Error message: 0 x 00000643 by using the control panel, add the printer on Vista method

  Install the software,

  Ask me to add a new printer

  It found the printer on the network

  Network printer installation begins

  Error message - on two laptop computers, regardless of the method, never cross here

  -Unsuccessful network installation, this printer could not be installed on the network-

  Try searching for thing need that opens.  It does not solve it...

  Everyone?

  Hey @CandyCaneLane,

  Thanks for getting back to me on this subject.

  Because you get the message "the driver for WDF device Print is not installed" under the heading adding printer, it would seem that the packet driver HP full software functionality is not used, even if you have already attempted an install disk with the download. Can I please you follow the steps below.

  Please make sure that the USB cable is disconnected from your printer to your computer.

  Step 1: Remove the device:

  It is crucial for the repairs we have a clean slate to work with. So, I'm going you have to make sure every trace of your HP Envy have been removed from your computer, before installation. Perform the following steps on your computer Windows Vista and Windows 7.

  1. Click on the Start menu
  2. Select all programs
  3. Click the HP folder
  4. Select your HP Envy
  5. Select Uninstall
  6. Please follow the prompts on the screen to complete the uninstall
  7. Click on the Start menu
  8. Select the devices and printers
  9. If you see your HP Envy listed, please right click top and select "remove device' or 'Remove'.
  10. Once the device HP Officejet was deleted please click left once on any device used to indicate the heading Printers and fax machines . You just want to highlight the device
  11. Then click on the print server properties at the top
  12. Under the print server properties, click the drivers tab
  13. If you see your HP Envy pilot showing under the list please click on it. Then, click Remove. Click remove the pilot from the box pop up
  14. Click OK
  15. On the print server properties window, click apply and OK
  16. Close Devices and printers

  Step 2: Remove temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Install the device:

  1. Please click here to download the latest package Full Feature Software and Driver for your HP Envy
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. Choose the installation by the network
  4. Once the installation is complete on your Vista and Windows 7 computers please test print and scan to confirm functionality

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• MacBook Pro FaceTime camera does not.

  Good day to all.

  First of all, I want to wish everyone a Happy Easter!

  I am having trouble with my FaceTime on my Macbook Pro retina camera (end of 2013). I have never use the camera for nothing because I use FaceTime on my iPad and iPhone, but when I open the camera and tried to use it, the green light flashes and is not solid. And photos on Photo Booth look like this:

  

  And of course, which should not happen. It is also better to say I got my screen repaired by Apple now for more than a year (24/03/15) where my anti anti-glare came out. I never tried my FaceTime camera since that because, as I say, I do not use.

  Y at - it all sorts of things to try to make it work? I tried to put on with the MagSafe in and holding D at the same time and that has not worked. Of course, I don't want to pay £282 for a new retina display just for a camera, I do not use. But also its obviously better to have everything working as it should in the first place.

  Thanks for reading and any suggestions are welcome.

  Thank you

  Mitch

  xGrimzz wrote:... I got my screen repaired by Apple now for more than a year... I've never tried my FaceTime camera since...

  On your screenshot, yours is most likely a hardware problem.  Contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired.  When the repairs are finished, this time, ask the Apple tech to show you that the camera works before paying for the work and take the Mac home.

  Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

  xGrimzz wrote:... Y at - it all sorts of things to try to make it work?

  I would be surprised if your problem is correctable user because there is no serviceable parts by the user of the equipment.  However, if you wish, you can try these three additional things before seeking professional help:

  (1) If your Mac restart does not solve the problem,

  (2) use http://support.apple.com/kb/HT2090 from Apple.

  (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

  Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

  A 'Standard' user account is all you need for the tests.

  (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

  xGrimzz wrote:... I don't want to pay £282 for a new retina screen just for a camera I use... suggestions... Welcome.

  If you use not the camera, and if you experience any other problems with your Mac, it is certainly your option to use the Mac without repair.

  If you want to be able to use a webcam without spending the money for a whole new view, a compatible external webcam Mac might be a cheaper solution.  Be aware, however, that it is possible that the problem of your Mac can also prevent an external camera work.  Therefore, you might want to take your Mac with you and shop on-site.  Ask the retailer to let you try any webcam of interest to see if it will work with your MBP before buying.  If a known-working external cam will not work with your Mac, the material compensation is your only option to leave the uncorrected problem.

  Post edited by: Jim EZ

  Mac OSX 10.11.4

• 10.9.5 security Update 2015-008 installed yesterday and the camera does not work

  Hello

  Updated with security update 2015-008 yesterday on 10.9.5 and iMac 27 (end of 2013 - iMac14, 2 Intel Core i7 3.5 GHz) camera (UVC camera VendorID_1452 ProductID_34065) no longer works in Skype, FaceTime, or photo booth...

  It is most annoying. Thank you for advice or guidance.

  Tarkan

  One of them will solve your problem of camera:

  (1) If your Mac restart does not solve the problem,

  (2) use http://support.apple.com/kb/HT2090 from Apple.

  (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

  Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

  A 'Standard' user account is all you need for the tests.

  (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

  (4) If none of the suggestions above resolve your issue, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

  Post edited by: Jim EZ

  Mac OSX 10.11.2

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• When I try to connect to hotmail and received the following message ' sorry, there's a problem with Hotmail right now Hotmail was not able to complete this application.

  Hi, I try to connect to hotmail and received the following message ' sorry, there's a problem with Hotmail right now Hotmail was not able to complete this application. Microsoft may contact you about any matter that you declare "what steps should I take as I have urgent e-mail to check." THX

  Hello

  Looks like a temporary problem.

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My creative application of cloud does not load then I'm connected with my Adobe all identification code suggestions?

  My creative application of cloud does not load then I'm connected with my Adobe all identification code suggestions? The icon in the menu remains grey...

  

  Please check the steps mentioned in: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesn ' t - open.html

• I have a request, I am able to work with all applications, even if I am offline, not having no internet connection?

  I have a request, I am able to work with all applications, even if I am offline, not having no internet connection?

  Yes.

  You must be connected via the internet to install your programs cc, then at least once every 30 (monthly) or 91 days (sous-annuelle).

• Camera does not show the extent and automation with Legacy 1394 drivers

  Hello

  I have a Guppy AVT Firewire camera and try to get this camera working on a new Windows 7 PC, I have here.  The PC is running Windows 7 Professional 32 - bit.  When I connect the camera to the computer, it installs the driver NOR-IMAQdx IIDC, the camera appears in the studio of measurement and automation (version 4.6.2) under the heading "devices OR-IMAQdx", and everything seems to work great.  However, I need to use the legacy driver.  When I select the "Legacy IMAQ IEEE 1394 IIDC" driver, the device disappears from measurement and Automation Studio.  Reboot of the camera or to disconnect and reconnect the camera do not help.  In the Windows Device Manager, the la camera camera shows that the use of inheritance OR IMAQ IEEE 1394 driver (11/10/2006, version 2.0.5.0 that day), and windows reports it as working properly.  However, it is not always on display of the measurement and Automation and my application cannot see the camera.

  Here is what I tried:

  * Update the NI Vision Acquisition version 2009.11 software.

  * Make the legacy NOR-IMAQ for cameras 1394 2.0.5 is installed

  * A tried the same device with the same software on an old PC running Windows XP and found everything works as expected it.

  * A tried a card PCI IMAQ 1405 in the Windows 7 PC, which works very well.

  * Search in the forums.  I found several references to this document which refers to issues where disappear from the camera of measurement and Automation Explorer:

  http://digital.NI.com/public.nsf/allkb/22AD45D8A5B053AF86256EB5003B2811?OpenDocument

  It seems that it might apply to my situation, however, the link is dead for me.

  Thanks for any help!

  I suggest you to install the bus driver 1394 AVT on your PC.

  This replaces the microsoft implementation of the 1394 Protocol and is better suited to the activities of the vision.

  You always can choose IMAQdx or old drivers.

  http://www.alliedvisiontec.com/EMEA/products/software/Windows/AVT-1394-busdriverpackage.html

  However, I'm not sure if it will work on windows 7

  Ben Engelen

• Does anyone know how to connect a Garmin GPS to the EOS 7 d? The camera does not see.

  When I plug in my Garmin GPS on my EOS 7 d and go into the GPS settings in the menu. The camera does not see all I get is "GPS not connected indication." The GPS turned on and functional. Someone at - it ideas?

  Once I had an application that you had photographed the display of a GPS device (the type that a rider could use because they observe "breadcrumbs" trail of your itinerary) on #1 chassis (they wanted to just make sure that you have a picture of the time on the GPS display.

  You then go about your day taking photos with the GPS running indepdently.

  At the end of the day, you import the images and it asks you to enter the time displayed on the first photo.  It uses the display of GPS time and calculates the offset of the time, the camera recorded in the EXIF data (just in case the clocks were not perfectly synchronized).  Then she uses the breadcrumbs on the GPS track and apply the GPS position, data for each photo from your camera roll.

  It was a bit complicated and app tried to take over your App "photo management" (which I didn't... "I wanted just the position data added to the existing images), but it worked.

  The fact is... I was able to add correction of position information to each photo and it did not require actually integrate the GPS to the camera (it was quite after the fact).

  Today, I own the module GPS Canon (MUCH more convenient), so I don't deal with that more.

  hikeray2 wrote:

  When I plug in my Garmin GPS on my EOS 7 d and go into the GPS settings in the menu. The camera does not see all I get is "GPS not connected indication." The GPS turned on and functional. Someone at - it ideas?

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.

• Application of my camera does not work

  Application of my camera does not work, it tells me that something went wrong, whenever I try to take a picture, I don't know what's the problem with him. I built in camera on my laptop, and the app is updated. How can I fix?

  Hello

  It is clear from the description that you have problems with the camera application

  Here are a few things you can try

  Method 1: Download and run the troubleshooter app and check.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2: Synchronize the application license and check.

  To synchronize your licenses app, follow these steps:

  a. on the Start screen, tap or click on Store to open the Windows store.

  b. drag from the right edge of the screenand then tap settings.

  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click settings.)

  c. press or click App updates. If you have not connected to the Windows store, sign in using your Microsoft account.

  d. press or click on Sync licensing.

  For more information, see the link.

  What to do if you have problems with a soft

  Method 3: reinstall

  Finally, if all else fails, you may need to reinstall the application. Just right click and click on uninstall. Then install it on the app store

  If the problem persists or you want to help, reply to this message

  Ashwin0