Camera is connected to import pictures but will not load I can't see them on import it pictures and video module

Similar Questions

• Using a Vista laptop, connects to the internet, but will not load page. DNS problem.

  Hello.

  I use a Toshiba laptop with Windows Vista Home Premium 64-bit.

  I just have a modem and use a router. I have a network cable (cat 5) connected to my laptop and the modem. I have log-on internet and it connects. But when I open Google Chrome, IE9 or Firefox I can not load a web page. Google mentions something about the DNS cannot be found and DNS_Probe_Finished_No Internet.Frefox says server not found.

  I click on the Menu start - Connect To - I am logged in. I already typed my password in the command prompt and appropriate the pppoe connection/address (I use ADSL).

  I talked to my ISP and we tried to do certain things. But nothing works. On their end, it shows that I am connected. But I can't browse the internet. We tried to have the DNS and IP address for ipv4 set to obtain automatically and I put 2 numbers of DNS in manually once the settings have been changed to the favorite servers and DNS auxiliary, or worked.

  Using command prompt, the DNS has been emptied. It did not help. The modem has been reset the ISP location. I also recreated and set up a new network connection.

  My office is using the same pppoe information. I can freely browse the internet and I use Windows Vista Home Premium 32-bit. I was also shown to be connected simultaneously with both machines, but that the Office can go.

  I do not have Windows Update the laptop since on April 2016. It has not been used and the battery was empty. I tried to turn off the laptop several times, but nothing works.

  Y at - it suggestions to solve this problem? At that time perhaps a re - install will work.

  System Restore worked. I will run the updates and see what happens.

  I think it was a program that I uninstalled in programs and features.

  It's also useful information for this post: https://answers.microsoft.com/en-us/windows/forum/windows_7-networking/unable-to-connect-internet-dns-error-windows-7/72040e27-7a87-4f6f-88d6-9d158da38de8

  1.

  Note

  • You must open a command with elevated privileges prompt to complete the following steps. For more information, see command prompt: frequently asked questions

  1. Click the Start button.

  2. In the search box, type command prompt.

  3. In the list of results, right-click Guest, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. At the command prompt, type ipconfig/flushdns.

  2.

  Start - Search programs and files
  Type "Command Prompt".

  Right-click in the program file that appears above the run as administrator.

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

• Fire fox is slow and on a single website, it goes on the site but will not load the page

  Fire fox is slow. Also on a single Fire fox web site goes on the website but will not load the page
  Questions began Tuesday, June 16, 14. Website can be opened with other browsers.
  I am running windows XP sp2

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart

• HP Envy 4500: Printer connected to the router, but will not print wireless Macbook

  I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.

  Hey @miriamnimmo,

  Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.

  Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.

  See you soon!

• iPhone 5 s watch the load but will not load

  My iPhone 3 months 5 s done this time in ten days. When the charger is plugged in, it shows the loading sign. But the percentage has not increased and finally the battery gets drained. After that, it shows the screen below. I tried to charge the phone after that continuously for more than one day and not luck. Instead forge the phone for a day or two and plug the charger - it comes up with the apple logo. And behaves a good boy a week before the issue resurfaced surface again. Tried all the settings I found on the internet and no luck. It does not start in safe mode as well.

  

  I took it to the istore. They tried to Flash, check the battery performance. Everything was perfect reported. After a day with them, he would be back to normal and they return saying that the problem is solved. They seemed helpless. However, I managed to show them the question to live when he did not, and showed support. It has been three times I gave the phone to the istore and had back in the same State.

  I'm the only person who is faced with the question of all the lucky iphone owners?

  Should I ask for a replacement? I am facing this problem since the first week, I started to use the phone. The inconsistent behavior irritates more that guys istore says they will not be able to request a replacement. Ask a serious help in this. I don't think I can live with that.

  I think that this forum is noticed by the technicicians\officials of Apple. Any help on this would be much appreciated!

  Thank you!

  See you soon!

  Amandine

  Hello

  Back iPhone to store ask for a replacement.

  Your iPhone has had an intermittent fault

  See you soon

  Brian

• I tried to buy Let It Be the audiobook version and it will not download. Said that I bought it, but will not download. I made another purchase at the same time and had problem now.

  I just tried to buy the audio book of Let It Be version. ITunes says that I bought, but it will not download. I did purchase just before that Let It Be one and it downloaded without problem.

  Is it is not currently downloaded from iBooks on your iPhone app, then it shows on the purchase tab in the download application?

• software and star driver hp psc 1315xi all-in-One extracts full but will not load on xp sp3

  Can not find a way to get this to install. After extracting I finally found it in running %Temp%. Searching through all files and folders, trying to find the exe file. to get it to autorun, but was unsuccessful. I tried to install this on 2 different PC with xp pro sp3 but no luck.

  The solution below is from michael323 here in the Forums of HP's Support.  Make sure that you send Bravo!

  I think I have solved this problem.

  I have a PC Windows XP Pro (SP3) who has been affected by this problem.

  Immediately after that the window of 'extraction' went to 100% and closed, nothing happened.  The windows install/never display software.

  Whenever I tried it creates a log file that started with this:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  # GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "

  System LangID = 1033.  mapped to ENU

  # The system language is ENU, but is not on our CD!

  There was other error messages after that, but they all come from lines 3 and 5.

  Something she prevented the installation program to recognize the language ENU files ARE present in this download.

  Comparing two PCs, a problem, and one that works perfectly, I saw that one who was not was AutoRun disabled through a registry setting.  I temporarily deleted this registry on the PC that wasn't and Setup launched and ran like he was supposed to.  Here are the first of this log from the same PC, a few minutes later, where the only difference was that I had removed the registry setting criminalized:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  System LangID = 1033.  mapped to ENU

  We use the system of language = FRA, which is located on our CD!

  As you can see, the message "(LanguagesInthisCD) failed" (line 3) disappeared, and the line 5 (now line 4) shows that it has to recognize that the language ENU installation files are present.

  So if you encounter this problem, and you are comfortable with the system registry, here is how I got it to work on my PC:

  Start regedit
  Navigate to the bottom of this tree
  -HKEY_LOCAL_MACHINE
  -SOFTWARE
  -Microsoft
  -Windows NT
  -CurrentVersion
  -IniFileMapping
  Below, find out if there is a key named "Autorun.inf".
  On my PC (the one with this problem) the value of this key has been "@SYS: nexistepas".
  If your registry database also has this, it may be the cause of your problem.
  In the left pane of regedit, do a right click on Autorun.inf and select "Rename" from the context menu.
  Change the name to something like "Autorun.inf.hold".
  Close regedit
  At this point, I restarted my PC, but I don't know if it is really necessary.
  I ran the downloaded driver file.  It extracted, and the Installer started out as it was supposed to.

  When it was done, I returned in regedit and renamed "Autorun.inf.hold" to "Autorun.inf".

  It is extremely frustrating for me, and (if you need it), I hope that this solution works for you.

• Since El captain of loading, I can't open Photoshop &amp; Lightroom 2015 CC all it gives an error of '1 '. Have reinstalled, vacuum cleaner used, but will not load showing only error

  Since the El Captain on MacPro 2.8 Ghz Tower loading, I can't open Photoshop and Lightroom 2015 CC all it gives an error of '1 '. Have reinstalled, vacuum used but still does not load only showing error '1' someone to solve?

  See you soon,.

  John Frost

  Error code 1: "unable to install". Creative Cloud Desktop: https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

  https://forums.Adobe.com/message/7533806

• July 24, 2010, firefox will not load a Web page. I uninstalled 3.6.8 and you want to re - install 3.6.2. How can I do this?

  My firefox updated version will not work. I uninstalled and want to return to my previous version that still worked. I have Microsoft Vista. Please help as soon as possible.

  This has happened

  Each time Firefox opened

  July 24, 2010

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 6.0; Chrome/5.0.375.99 en-US) AppleWebKit/533.4 (KHTML, like Gecko) Safari/533.4

  This can be caused by a firewall blocking internet access to Firefox. See that configure the firewall so that Firefox can access the Internet. This link has a list of popular firewall and how to configure it to work with Firefox.

  See also Firefox cannot load websites but other browsers may

  If you need to install an earlier version, see install an older version of Firefox.

• Restarted my WRT160N, now my laptop connects to my network but will not connect to internet

  I forgot my password to the original network so I restarted my WiFi router, now my computer reconizes my home wireless network and connects (accepted the new password and all), but when I open my browser, it cannot connect to the internet. My internet connection still works when I plug my laptop directly into my cable modem, and my laptop says that I'm connected to my wireless network, so I don't know what the problem is here.

  I was pulling out my hair for the last few hours trying to find a way to solve this problem, so any help would be greatly appreciated.

  Thank you

  Go here to check your cable configuration.

• WRT54G will connect to the network but will not connect to internet

  Guys, I installed an older Linksys CM100 cable modem and when I did I lost the connection to the internet using the WRT54G Router. I can connect fine net when I go to right fromt the modem cable to the pc. I can use my home network very well. I did a firmware upgrade, does not. I'm losing my mind. It worked fine before the new cable modem. Does make sense to anyone? BTW, I can't connect to the internet via wired or wireless connections and ping www.google.com gives 100% packet loss. Ditto for a ping to 192.168.1.100 (cable modem) when the router is connected.

  Dear God please help me

  -Jacob

  Thus, because no one here was able to offer all the help, I called tech support and was very surprised. I was able to get a tech immediately and without going through the 1 million on the phone buttons. The service is in India, but I could communicate well enough with him, even though I usually have people of understanding of handful who speak English as a second language. The issue that I had was that the default IP of the modem cable (192.168.1.100) and ip address of the router (192.168.1.1) were too similar. Apparently, the fact that the 3rd number 1 for both series was the cause of the problem. We changed the IP address of the router to 192.168.5.1, power cycling it and unfortunately it worked.

• OJ j6480 all in one. : printer connected to the network, but will not print.

  OfficeJet j6480 all-in-one Windows 8

  My printer configuration report show that the printer is connected to my home network. My Control Center shows that my HP printe (my only printer) is listed as the default printer. When I open it, it shows a document in the queue, and offline. When I click on 'offline' the document in queue is considered and when I click on "Printer" in this window, the drop-down list displays the default printer, but 'use printer offline' isn't not verified. Bottom line, it's that I can't print. Help much appreciated woutd.

  I found someone with a similar problem and a simple solution. I deleted my printer in the "devices" list and reinstalled

  It worked. I suspect that your suggestion about the IP was probably on the brand, it had not occurred to me.

  Thanks for the quick response.

• HP 20 Pavilion all-in-one: 4500 DESIRE CONNECTS to THE WIFI, BUT will not be PRINTED

  Hello

  I have problems printing from my PC.

  I'm connected wireless and the PC can see the printer and recognizes that it is ready.

  I'll then to print the document, including the States of PC is printing and printed, but nothing happens, no document is printed.

  I have two portable mac I can print from without any problem at all, but not my HP PC family.

  Help, please

  Thank you

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• S3100 says it is connected to the Internet but will not play Netflix.

  I read where everyone seems to have a problem that they can not connect to video services.

  I think it's sad that an update makes your unusable.  Never had a problem with my Panasonic TV boxes.

  I don't really know how to make a network connection to the hand.  Why are told that it is connected?

  YOU MUST DO AN UPDATE TO FIX THIS!

  Hi MichaelJohn and lhendricks,

  Try to initialize the player requests by going to settings > reset > initialize personal information > OK, and then click on and select Internet videos then agree and on the following end user license agreement.

  The issue only happens on Netflix, how about other apps?

  Do you receive an error message?

  If my post answered your question, please mark it as "accept as a Solution.

• Cannot connect to YouTube, the page will not load.

  I use version 28.0 and I cleared my cache, cookies and history of the browser. I can watch a video on Youtube, if a direct link and sometimes access to the site itself, but I can't log on my YouTube account. When I click on login, the page tries to load until I finally exit out of it and give up. After this point, I can not access the real YouTube website. I am able to connect to any other site, I've tried, including Facebook and my Gmail. I have no problem with this in my torch/Google Chrome or Opera browsers.

  I added Firefox on my programs that can both through Windows Firewall and have run Malwarebyte scans s, Windows Defender, and SuperAntiSpyware. What can I do to fix this? Y at - it a plugin that I missed resettlement, because I had to uninstall and reinstall Firefox from scratch recently, or is there something else I'm missing?

  The problem seems to have resolved itself somehow. I didn't do something different after trying to solve this problem, far backward at the beginning and running a couple of analysis between the two then and now you can find the usual cookies of my sites which had been cleared when I complained about this problem in the first place. I really hope that it does not start again.