OJ j6480 all in one. : printer connected to the network, but will not print.

Similar Questions

• WRT54G will connect to the network but will not connect to internet

  Guys, I installed an older Linksys CM100 cable modem and when I did I lost the connection to the internet using the WRT54G Router. I can connect fine net when I go to right fromt the modem cable to the pc. I can use my home network very well. I did a firmware upgrade, does not. I'm losing my mind. It worked fine before the new cable modem. Does make sense to anyone? BTW, I can't connect to the internet via wired or wireless connections and ping www.google.com gives 100% packet loss. Ditto for a ping to 192.168.1.100 (cable modem) when the router is connected.

  Dear God please help me

  -Jacob

  Thus, because no one here was able to offer all the help, I called tech support and was very surprised. I was able to get a tech immediately and without going through the 1 million on the phone buttons. The service is in India, but I could communicate well enough with him, even though I usually have people of understanding of handful who speak English as a second language. The issue that I had was that the default IP of the modem cable (192.168.1.100) and ip address of the router (192.168.1.1) were too similar. Apparently, the fact that the 3rd number 1 for both series was the cause of the problem. We changed the IP address of the router to 192.168.5.1, power cycling it and unfortunately it worked.

• WIFI on my C850 Satellite can detect the network but will not connect

  I just bought a satellite C850 - PSKCCA-02D00M

  The connection to the LAN works fine however the Realtek RTL8723AE without wireless/Bluetooth will not connect to the network. It can can detect them just does not connect. I used the troubleshooting, and he cannot sort.

  All other devices connect very well as Iphones and Kindle

  In the config is doctor says that the adapter is enabled in a domain and in the adapter another status is down.

  I took back to the initial power and installing and unistalling and reinstalling the adapter using the driver on the website.

  Any help is welcome. I don't want to have to take back just for this issue

  See you soon

  Your WLAN is locked? Can you connect WIFI if you delete the WIFI password for two minutes?
  Have you tried to reboot your router?

• Windows Vista Business ed. reformat - my computer detects the network but will not connect to Internet

  Can someone help me, I can't reformat a laptop compact with a windows vista Business edition OS. I was wondering if I could use the recovery partition or do I have to use an installation CD. And by the way, just to give you a head I'm just a beginner and badly needs help. the problem I had is I get a strong signal for my WiFi, but again it is not connect to the internet it connects sometimes but then after I reboot my phone it comes back with the same problem, it connects to the internet, but I detect my network, someone told me to just reformat the entire system. I hope someone can give me a help step by step on how to do it. and also I do not see the product key for my system. your help would be greatly appreciated thanks

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Formatting/reinstalling is overkill. A bit like buying a new car because you have a flat tire.

  To reinstall, you can use either the volume of recovery or the recovery disc, both should work pretty much the same. In general, the product key is located on the system like a sticker (on laptops usually on the bottom). If you can't find yours, you should contact the provider or your network administrator (and in fact, if there is a working system, you should contact them before doing anything).

  Before you do this right, you can try this: click Start and type CMD. Right click on the menu entry that appears and choose "Run as Administrator". Click on continue in the UAC prompt. From the command line, run:

  ipconfig/release

  ipconfig/flushdns

  ipconfig / renew

  Allow everyone to finish (return to the command line) before proceeding to the next. When you are finished, close the command prompt. See if that helps with your problems of connection.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• HP Envy 4500: Printer connected to the router, but will not print wireless Macbook

  I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.

  Hey @miriamnimmo,

  Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.

  Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.

  See you soon!

• Restarted my WRT160N, now my laptop connects to my network but will not connect to internet

  I forgot my password to the original network so I restarted my WiFi router, now my computer reconizes my home wireless network and connects (accepted the new password and all), but when I open my browser, it cannot connect to the internet. My internet connection still works when I plug my laptop directly into my cable modem, and my laptop says that I'm connected to my wireless network, so I don't know what the problem is here.

  I was pulling out my hair for the last few hours trying to find a way to solve this problem, so any help would be greatly appreciated.

  Thank you

  Go here to check your cable configuration.

• S3100 says it is connected to the Internet but will not play Netflix.

  I read where everyone seems to have a problem that they can not connect to video services.

  I think it's sad that an update makes your unusable.  Never had a problem with my Panasonic TV boxes.

  I don't really know how to make a network connection to the hand.  Why are told that it is connected?

  YOU MUST DO AN UPDATE TO FIX THIS!

  Hi MichaelJohn and lhendricks,

  Try to initialize the player requests by going to settings > reset > initialize personal information > OK, and then click on and select Internet videos then agree and on the following end user license agreement.

  The issue only happens on Netflix, how about other apps?

  Do you receive an error message?

  If my post answered your question, please mark it as "accept as a Solution.

• HP 20 Pavilion all-in-one: 4500 DESIRE CONNECTS to THE WIFI, BUT will not be PRINTED

  Hello

  I have problems printing from my PC.

  I'm connected wireless and the PC can see the printer and recognizes that it is ready.

  I'll then to print the document, including the States of PC is printing and printed, but nothing happens, no document is printed.

  I have two portable mac I can print from without any problem at all, but not my HP PC family.

  Help, please

  Thank you

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• Using a Vista laptop, connects to the internet, but will not load page. DNS problem.

  Hello.

  I use a Toshiba laptop with Windows Vista Home Premium 64-bit.

  I just have a modem and use a router. I have a network cable (cat 5) connected to my laptop and the modem. I have log-on internet and it connects. But when I open Google Chrome, IE9 or Firefox I can not load a web page. Google mentions something about the DNS cannot be found and DNS_Probe_Finished_No Internet.Frefox says server not found.

  I click on the Menu start - Connect To - I am logged in. I already typed my password in the command prompt and appropriate the pppoe connection/address (I use ADSL).

  I talked to my ISP and we tried to do certain things. But nothing works. On their end, it shows that I am connected. But I can't browse the internet. We tried to have the DNS and IP address for ipv4 set to obtain automatically and I put 2 numbers of DNS in manually once the settings have been changed to the favorite servers and DNS auxiliary, or worked.

  Using command prompt, the DNS has been emptied. It did not help. The modem has been reset the ISP location. I also recreated and set up a new network connection.

  My office is using the same pppoe information. I can freely browse the internet and I use Windows Vista Home Premium 32-bit. I was also shown to be connected simultaneously with both machines, but that the Office can go.

  I do not have Windows Update the laptop since on April 2016. It has not been used and the battery was empty. I tried to turn off the laptop several times, but nothing works.

  Y at - it suggestions to solve this problem? At that time perhaps a re - install will work.

  System Restore worked. I will run the updates and see what happens.

  I think it was a program that I uninstalled in programs and features.

  It's also useful information for this post: https://answers.microsoft.com/en-us/windows/forum/windows_7-networking/unable-to-connect-internet-dns-error-windows-7/72040e27-7a87-4f6f-88d6-9d158da38de8

  1.

  Note

  • You must open a command with elevated privileges prompt to complete the following steps. For more information, see command prompt: frequently asked questions

  1. Click the Start button.

  2. In the search box, type command prompt.

  3. In the list of results, right-click Guest, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. At the command prompt, type ipconfig/flushdns.

  2.

  Start - Search programs and files
  Type "Command Prompt".

  Right-click in the program file that appears above the run as administrator.

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• filDans: I am connected to the network, but I can travel and how do I share my document folders

  I am connected to the network, but I can travel and how do I share my document folders

  Here is the procedure or file and printer sharing in Vista: http://technet.microsoft.com/en-us/library/bb727037.aspx.   After that you have Setup sharing in general, then you just need to select the files/folders to share besides than the public folders that will be automatically shared.

  Did you mean to say you can "Browse t?  Here are a few articles on the setting up of networks, configuration and troubleshooting of wireless networks, dealing with the networking between different operating systems and many other subjects that may or may not apply to your situation as you didn "t explain anything on the network.  Even if the subject does not apply, please see the article anyway because many contain information that applies to more than just the given situation (for example, article on networks that Vista with Windows 7 covers a lot about networking in general which can help yoo.  If you are not wireless, or if you encounter any problems with the internet, you can skip the articles dealing with these issues.

  Here are the procedures for Vista with Windows7 network layout that can help:http://www.windowsnetworking.com/articles_tutorials/Windows-7-Understanding-Network-Administration-Configuration.html.

  Here is another article on home networks (with several links to related articles which must all be considered - as well as others, you will find in the related articles) to help you better understand the home networks: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.  If it's for Vista, much of it applies to Windows7 (although there may be some differences that should be addressed in the previous article).

  Here is an article on the networking of the different versions of Windows:http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows.

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  I hope this helps.  If that is not the case, then please describe your network, the types of computers involved, and their HSE, how it is connected, which is exactly your problem, what version of Vista you are using and everything imagine you could help me understand what is happening.  At this point, I'm quite confused on the problems you are having and what you are trying to reach.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• Microsoft Office 2007 (Word, Excel, Outlook) slow when connected to the network, but fast when not. with windwos vista

  Microsoft Office (Word, Excel, Outlook) and printer slow when connected to the network, but quickly when not. with windwos vista, I have reintall the operating system, but still the same. Environment Network (Win server)

  Hello

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in Windows Vista IT Pro Technet Forums network.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro/

  I hope this helps.

• Computer connects to the network, but not to the Internet, connect to the only local

  Hello world

  OK, so I have a HP computer with the installed version of Windows Vista Home Premium 32-bit. I've had it for almost 2 years now and have had no problems connecting to Internet... until now.

  I can connect to networks... both wireless and cable, but I can not get Internet. I used the IP, subnet mask, gateway and server settings DNS to another computer that works with this specific local network just to see what happens... my computer has failed.
  Until recently, I could connect to this WiFi connection in a coffee shop, but the last time I tried it didn't work. I've connected to the network but not the Internet. He told me that the DNS server did not. I'm starting to think that something is wrong with my computer.

  I saw that the solution for some people running the Norton removal tool, however I had uninstalled Norton almost as soon as I got my computer 2 years ago and ran McAfee instead. I don't think that Norton should have an impact on me more.

  Is there a solution to this problem... or I'll just have to try everything that is out there?

  Thanks for your help!

  Hi MomPlaysBass,

  Finally, my problem has been resolved - it wasn't my computer after all. The modem may only be connected to a computer. If you want to connect to another computer, you can connect the computer to the modem and then put it back. My computer worked fine after that. Whenever we want to switch between computers, even if I have to reset the modem.

  I don't think you have the same problem, but just in case, you can try to reset your modem - it's a button on the back or a small hole that you can reach with a pen... Hold the stylus for about 5 sec or maybe a bit more and then let go. That should reset your modem and might help you with your problem. Your computer should also have created a restore point... If all else fails maybe you can try to get back to the final point where your computer worked.

• My computer guard give up a connection to the network but the other computers in the House are connected

  My computer said at the outset that it is correctly connected to the network but then immediately lose the connection. Sometimes it will say that I limited the connection, but the strength of the network is always excellent. Computers are my roommates are working properly. Initially, he says that TataraTmp is the network of choice. I tried to delete this network that I am still unable to connect.

  Hello

  I guess that it is a wireless computer.
  ------------------------------------

  Maybe this can help.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.