Camera Sync Start does not

Platform: TestStand 4.2, LabVIEW 8.6.1 (also on LabVIEW 2010).

We have a system doing vision tests.  It is currently deployed on both (Japan and Europe) customer sites for DUT tests and our Australian Office (my site) for development.  It worked well (apparently) a month or two before (before my colleague on the left), but has now stopped working - almost certainly because of something I've done in the meantime.  Unfortunately, there has been a lot of changes and I need some ideas where I should probably be looking.

Systems have tasks of synchronizing two cameras, one at 15 Hz to 200 Hz.  If I start with MAX, images can come the cameras without any apparent problem.

However, when we run from TestStand, sync pulse start (as evidenced by a CRO) but some images are from the cameras.

During the initialization sequence, for each task, I call the VI referenced in the first attachment as "Initialize Camera Sync".  (This VI has not changed since February 2010).  The cases are running.  Initialize the camera Sync then calls the VI "Start Sync camera" as shown in the second attachment.  (This VI has changed in August this year - the poster said "Screw recompiled" and the previous comment of June said "Disabled debug".) The first sub - VI in this clause is attached like «Get the name of Terminal»  (This VI has also not been changed since February 2010.)

At the end of the initialization sequence (76th step of it), we start the CAN system, which will also begin data acquisition tasks - at least, it's supposed to.  The CRO shows that the camera synchronization pulses begin.  However, our vision system receives nothing from the cameras.  If I pause TestStand and use our other utilities of vision, no image appears.

If I start the tasks using MAX, then run the sequence, I get an error during initialization (as one would expect), but the images appear.

If someone is still with me here, I would appreciate any ideas or advice.  I don't have enough hair left to tear most...

Thank you

Geoff

Problem solved:

In Australia and the Japan, it was a wrong configuration file. (Our calibration utility had written strings with misleading quotes.)

In Europe, the problem was due to the configuration of trigger in buses from their largest PXI backplane.

Tags: NI Software

Similar Questions

  • After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

    Original title: screen saver does not start because MSVCR100.dll was not found

    After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

    ScreenSaver: Photo screensaver.scr - unable to locate component.

    This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

    The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

    Help, please. Thank you.

    Hello

    It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

    But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

  • Camera RAW plugin does not

    Hello

    I recently downloaded the update to Camera RAW 5.6 to 8 items, but even after follow the instructions carefully and verfigying that the card has been added that I can not open a RAW file in photoshop. I don't know what the problem is and am hoping that someone with more experience in this area can help.

    Help?

    Thank you

    Cara

    Yes, we haven't started supporting the D3100 to the 6.3 version of the camera raw plugin (Source: Camera Raw plugin |) Compatible cameras). This version of the camera raw plugin does not work with Photoshop Elements 8 (Source: applications camera Raw compatible Adobe). To ensure the native support of the D3100, you need Photoshop Elements 9 or later version (10 is the current version). The other option is to convert your raw NEF files to DNG (a universal raw format) using the DNG Converter: Mac| Windows.

  • Sync symbol does not appear in the tab header

    In the version of Android, Firefox, I configured my e-mail address of synchronization, but the sync symbol does not appear where it should (except the symbol of private browsing). The desktop version of Firefox is properly set up with my account, so I have no idea what I can do now to make it work? Thank you.

    Hi snoreau, the tabs sync on android have moved into their own group of experts on the home screen (also known as awesomescreen).

  • information store service Exchange starts does not automatically

    information store service Exchange starts does not automatically

    Post in the Forums of Exchange Server:
    http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

  • Microsoft camera codec pack does not

    Built a new computer and I use sp 1 Swedish version 64-bit W7 on it. But the camera codec pack does not work. It worked fine on my old computer. First of all, I have installed the Sony raw pack but it din't work and after that I installed the 64 bit version of the Microsoft package but that didn't work either. Don't know what to do.

    Well I installed it again and this time it worked. Strange but I'm happy

  • My ORB start does not, he will have all the features and the icon disappear, just to the left of the word it

    My ORB start does not, he will have all the features and the icon disappear, just to the left of the word it

    even using restore window can not solve the problem, I use windows 7 pro, this happen after the update I have install on September 24, 2012

    Hello

    1. What is the KB (Knowledge Base) number associated with the update?

    2. the problem persists only with ORB start?

    Method 1: Make the SFC (System File Checker) scan and see if the problem occurs.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Method 2: Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.

    Microsoft safety scanner

    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

    Hope this information helps.

  • camera - fuji finepix - does not show as a connected

    Why my camera - fuji finepix - does not show as a device connected on mac OS 10.11?  Photos of Mac sees the camera, so cables etc are good.

    Hi jtucker,.

    If talk you about your Lightroom software does not detect the camera, please update your Lightroom 6.4/2015.4 update.

    Reference: Lightroom CC 2015.4 / 6.4 available

    Let us know if that helps.

    Kind regards

    Mohit

  • I have CS5 and a d-600. I would like to use camera raw, but does not. I downloaded CR 7.3 and still does not. What I need to upgrade to CS6... or just throw everything out the window and get rid of my d-600?

    I have CS5 and a d-600. I would like to use camera raw, but does not. I downloaded CR 7.3 and still does not. What I need to upgrade to CS6... or just throw everything out the window and get rid of my d-600?

    It allows you to use your RC files, Adobe - Adobe Camera Raw and DNG Converter: for Windows

    Camera Raw: How to use Adobe DNG Converter - YouTube

  • Last camera raw update does not work. Bridge no longer recognizes my raw files.

    I use CS 6 and last camera raw update does not work. Bridge no longer recognizes my raw files.

    If all else fails, try this:

    Plugin Raw camera setup

  • Satellite A205-S5804 - after installing Microsoft sync, it does not start

    Hello

    This model uses by me. I downloaded it from Vista to XP.

    After installing Microsoft Sync, you need to restart and my laptop does not start after that. HD is indicated and known on the BIOS.

    Any help please?
    BR

    Hello

    > After installing Microsoft Sync it requires a reboot and after that my laptop does not start.
    And it does n average boot t?
    You get an error message? The laptop freezes on start up? Do you get a BSOD?

    I put t know how you can solve this problem, but can you go into the advanced boot menu? You can start in safe mode?

    In my opinion Microsoft installation synchronization destroyed something in Windows and in the worst case, reinstall the whole OS.
    :(

  • camera started does not

    Hi yall. I have hp envy6-1113tx and, first of all, everything was good and after some time cyberlink, that is the camera show, had updated after that it stopped working and when I go to the camera, it's just empty. What should I do? Incidentally, I tried to reinstall cyberlink, but by a mistake, it can not be installed or it uninstalled itself

    Hi Sylvie,.

    Something to try / consider:

    • First, reset the laptop; It's a deliberate break and reconnect all drivers of material.  The forced is possible that webcam with the rest of the material.  Resetting does not affect your data or programs.

    Laptops - forced Reset to solve Hardware and Software issues-battery not removable

    OR

    Laptops - use Hard Reset to solve Hardware and Software issues - removable battery

    • Then, open the Control Panel > programs and features , and ensure that the Cyberlink software is actually "gone".  If it's still linger on, close the programs and features and remove the Cyberlink software with this program:

    FixIt - Solve problems with programs that cannot be installed or uninstalled

    • Reboot the laptop and connect...
    • Check and make sure that the Cyberlink software has finally disappeared.
    • Then, try to the Cyberlink software installation:

    sp59986 Cyberlink YouCam software V3.5.5.5811

    • Assuming that the Cyberlink installs:

    Another reboot might be nice - Windows love a good restart.

    • See if the device works.

    =================================================================================

    Webcam troubleshooting - Windows 7

    Webcam troubleshooting (Windows 8)

    Good luck!

  • Qosmio G30: Cam Sony MV does not work with port IEEE 1394

    Qosmio G30-117 does not support my Sony DCR-IP5E (a micro video camera) port ieee 1394. I tried to use pinnaccle studio 9 and video ulead studio 10, but I could not see my cam because of these programs.

    There is no problem if I install a new win xp media center edition (retail pack) and CDTOOLS drivers. But I want to use my setup of the Qosmio factory, I don't want to buy a new win xp media center edition.

    How can I solve this problem?

    Thank you all.

    Hello Amon

    I tested it with Qosmio G20 and my Sony camcorder using the same port.
    I tested it with Windows movie maker, WinDVD Creator, Adobe Premiere and Ulead Media studio Pro 8.

    You may believe, but each application was able to see my cam and I copied movies on the HARD drive, edited and created DVDs. I don't really know what is happening in your case, but when you connect your switch cam on game mode, and the cam must be recognized as new hardware and listed in Device Manager.

    When it works well to start the applications and check again.

  • Satellite P200-199: Chicony Camera assistant software does not

    OK, that makes me crazy. I read all the papers that came with my new computer. I have been using / computers in construction since 1994. The camera on the P200-199 does not work, the drivers are not recognized on my vista operating system. I tried other select USB driver it, didn't work. Research on the cd of restoration for more than an hour - was not found.

    I've not seen anything listed at pages 4-8-4-9. There is NO Camera Assistant Software"located 5 research for it on my computer. Tried yahoo, aol, msn all who have web applications cam - none of those who built it in camera.

    Yes, with this in mind, where I can d/l the software for this camera to work?

    Hello Dave

    Before starting any discussion please can you follow me thing: has your laptop or you factory settings installed your own OS?

    By the way: I'm really confused you with as much experience PC don't know what is the recovery image?

  • Sync system does not recognize the device

    original title: synchronize the system used to recognize my device. Now it is not. Device driver indicates that it works correctly, but I can't download songs or videos.

    My system to Sync Windows Media Player does not recognize when my Samsung Captivate phone is connected.  When I got him on the phone, all worked fine, but now it doesn't.  I would like to transfer new songs and videos to my phone, but the system doesn't seem to know that the phone is connected.  All drivers are in good working condition.  Computer knows the phone is plugged into the screen of pilots, but not on the generic details screen.

    Hi michie75,

    1. you remember to make changes to the computer before this problem?

    Step 1:

    You can run the fixit available in the link below and

    Equipment and devices not getting not detected

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Step 2:

    Check if the sync settings are correct. To do this, follow these steps.

    a. open Windows Media Player.

    b. click the arrow below the Sync tab, point to the device and then click Advanced Options.

    c. the Properties dialog box for your device is displayed. Tab sync, box start sync when device connects checkbox.

    d. restart the media player.

    e. the next time you want to sync, connect the device to your computer, click the Sync tab, and then click Start synchronization.

    For more information, please visit the links below:

    Set up a device to sync in Windows Media Player

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

    "Windows Media Player sync: frequently asked questions.

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for