Camera with iOS 10 problema

Similar Questions

• I just bought a new air of IPad.  It came with IOS 9.1 and I can't restore it from the cloud until I have upgrade to 9.2.1 How can I do this since I can't access my settings?

  I just bought a new air of IPad.  It came with IOS 9.1 and I can't restore it from the cloud until I have upgrade to 9.2.1 How can I do this since I can't access my settings until the IPad is set up?

  Set up as a new device, the Update 9.2.1 the restore to original settings and then load the backup.

  (139893)

• Digital camera with Satellite L30 problems

  Recently bought a Pentax digital camera.

  When I try to view pictures taken with a camera on my L30, a message appears "locate and install driver software.
  I click Yes, another message appears - insert disc that came with your Pentax camera, what I'm doing.
  Finally another message - cannot install Pentax Optio M40, Windows is not found software driver for your device. I visited the Pentax site and contacted them and they told me that if I (preloaded) OEM of Windows I have to contact my computer manufacturer because the OEM versions are adapted to the computer on which it is installed.

  Where is can this question - anyone help?

  I'm really confused and I have to say that Johnny is quite right. Part 3 producers of software must adapt own software for the most used operating system. Hardware manufacturer has nothing to do with these programs.

• How to remove places the iphone with IOS 10 album

  HOW TO REMOVE PLACES AND PEOPLETOP ALBUMS SINCE IPHONE RUNNING IOS 10?

  lwwfromohio wrote:

  HOW TO REMOVE PLACES AND PEOPLETOP ALBUMS SINCE IPHONE RUNNING IOS 10?

  First, turn off your hats of all the...

  You can not as these files came with ios 10.

  don't like it use the contact us link below to notify Apple.

• with IOS 10.0.2 - 5s iphone Bluetooth problems

  Since upgrading ISO 10.0.2 my M50 from PLT Plantronics (helmet unique headset) do not reliably connects with my iPhone 5 more. I have to go to the settings, activate bluetooth turned off/turned on, touch the device on the bluetooth page, etc. Once it connects successfully, it will reconnect (if I turn off the headset and turn it back on) for a short period. The next day he does not connect itself but I play with bluetooth on the iPhone again.

  It has always worked perfectly before the 10th of IOS.

  And, as I noticed others mentioning, the volume is much lower with IOS 10. The maximum volume is much lower. I can barely hear it now, more normal background noise, while driving.

  I did:

  Forget this device for the PLT M50 and paired again (several times)

  I did a Reset Network Settings

  I don't know what else to do - but it's a 10.0.2 IOS issue.

  Hello AppleUser2k,

  Please ask questions about your problems of connection between your iPhone and your Plantronics headset since you upgraded to iOS 10. I understand how important it is to have your Bluetooth devices connect with your iPhone with reliability. Here's what I recommend.

  The first thing we want to make sure is that all your data is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try the troubleshooting steps in this article to help: get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device should also check with the manufacturer that the device has all the drivers and firmware to work with the new version of iOS.

  If you have checked everything and that you have installed the latest firmware or driver and always are problems, please be aware of your surroundings when you encounter these problems. If you can isolate the time or location, you see the problems, you can isolate the cause. You can even see this help article to ensure that you are not affected by outside interference: the potential sources of Wi-Fi and Bluetooth.

  Thanks again and have a great rest of your day.

• I have problems with ios 9.3.5

  my ipod says it's still Friday, September 23 when it is Monday 26 and is stuck in the 04:00 time when I change the time, the screen turns off a color at random, then restarts then both will and I have to change but rest later if it changes at all used to date will not change anything and it runs still works when it wants to and it doesn't stay connected to WiFi , I have the ipod 5th generation and am not elligible for ios 10 Please if you can solve this problem with ios 9.3.5 I would be very grateful as I use my ipod for almost everything. Thanks - René

  It is a community based on the user. You do not speak to Apple directly. You can contact the Apple Support here: http://www.apple.com/ca/contact/

• Apple Configurator - ios 10 - applications are allowed with a composition problem

  Hello

  We use apple configurator to generate configuration profiles imported into MDM and install remotely to iphones.

  Suddenly, we have a strange problem with configuration and 10 of IOS. In the configuration, we use "Allow only certain applications" and with this settings, we cannot make outgoing call. Nothing happens... (nothing is happen hit the button risk, nothing will happen if select contact and select the phone number and click the call button). Receive works fine... If the configuration profile published and enable the allow all apps restriction, the call works again...

  No idea what has happened in the new IOS? There is a new application of system that we should include in the list of allowed applications?

  Concerning

  Hello

  We have exactly the same problem. We use Apple configurator to generate profiles and import to MDM.

  Suddenly once updated to iOS 10 and assistance to only allow applications in the section - whitelistedAppBundleIDs - we cannot make outgoing calls. Tapping the green button does not work.

  Any ideas what happened after updating to iOS 10?

  Same behavior with iOS 10.0.2 and in the whitelist BundleID com.apple.mobilephone

• Unfortunately I can't move my watch to watch OS 2.2! Why! Is there a problem with IOS 9.3.1 really no advice did not work

  Unfortunately I can't move my watch to watch OS 2.2! Why! Is there a problem with IOS 9.3.1 really no advice did not work

  Hello

  If you have already installed a beta seed or a developer, first remove all beta profiles.

  Instructions are available here:

  Update the software on your Apple Watch - Apple Support

• I have an iPhone with IOS 9.2.1 6.  It does not open jpg files attached to e-mail. The type of computer that sold it to me has no idea what the problem is.  I never had this problem with my iPhone 4 or iPhone 5. Any suggestions?

  I have an iPhone with IOS 9.2.1 6.  It does not open the jpg files attached to an email, although it opens the jpg files before a recent update of IOS.  My wife 4 IPhone opens the jpg files attached to our email.  I never had this problem with my iPhone 4, iPhone 5 or my iPhone 6 until a recent update, but I do not know what update caused the blackout.  The mobile phone seller did a search on the web and not found any reference to it.  A hard reboot was not helpful.  Any suggestions?

  What email provider? What happens when you try to open the JPG file?

• Anyone having problems with iOS 9.2.1? Storage problems, apps not working?

  Anyone having problems with iOS 9.2.1? Storage problems, apps not working?

  No, not at all. Maybe if your were to describe the issues a little more in detail, someone might be able to help.

• Will there be new touch ID problems with iOS 7.1 measures?

  I have an iPhone with iOS installed 9.0.2 6. I was hesitant to go to iOS 9.1 because of problems with the Touch ID reported about 4 weeks ago. Thereafter, who had been an interim update (? iOS 9, 1.1), but I have seen no recent comments. Are there developments in this issue? I note tha iOS 9.2 beta 3 has been released; However, the overview of comments I've seen of the 'new' address for the iPhone elements, but says nothing about the contact ID. Any news?

  I used each publication IOS 9 so far. Never had a problem with TouchID. And I have not seen much on this forum about people with problems so, whatever it is, it probably wasn't terrible together.

• Compaq Presario desktop XP-problems connecting / came with the settings and files of the previous owner

  My Director ex-chorale of the Church and his wife (was his computer) moved to Minnesota and gave me this Compaq Tower and the monitor speakers.  She cleaned me all of hers off the coast.  Well, she didn't.  She switched to the network connection and modem.  I'm low on memory.  Help support & the beginning, Compaq support and connections says "unable to connect to the server."  I have fast Internet with Comcast cable.  His modem is Gegere or something and the network connection is RealTek 97 Fast family and mine is Arris (modem).  Specifications of the computer:

  XP Edition family c. 2002 SP3

  Compaq Presario Intel inside Celeron (R)

  CPU 2.53 GHz

  248 MB of RAM

  CD player works but the DVD player does not open.  Connection is so slow that it takes 5-10 minutes to open anything.  IE8 gets constantly "stops responding."  Just like Firefox.  When you try to close a window or stop start, end the program box comes back and comes back again and again.

  Went to start-help & support-Compaq help and did some tests.  For Audio, etc. get: "Exception in DisplayRunMap.runmap.

  Only had this computer for 2 weeks and did nothing to save.  Can reinstall Norton Security Suite for Comcast and my Microsoft Professional 2007 from a cd.  Thought to do the system recovery.  This OS came with Compaq and recovery CD system recovery option and there is F - 10 System Recovery on initialize toward the top.  Are they the same?  I first have to install Windows XP on a bunch of CD?  Can't make a DVD if the drive does not open.  The button is loose and nothing happens.

  I am 63 and security social disability so can not afford a new computer, or to hire a technician.  Help, please!

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The above requested information on the side, back, or bottom of your computer. , Please do not include your serial number.

  The 'F10' and Compaq system recovery of Windows XP system recovery are the same thing. You don't need to create "HP recovery discs" before making a recovery, but you may need these disks at a later date. If a set of disks has already been created, you will not be able to create a second series and you may need to buy a game from a third-party vendor.  With the complete model number name and/or product will allow us to direct you to a place to buy these records, if necessary.

  Please click the White Star of KUDOS to show your appreciation

• "Error - a problem prevented the document under analysis. Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner"while trying to scan using HP G4050 on windows 7

  A problem prevented the document are analyzed. Windows 7 - HP G4050 scanner.
  I have a HP G4050 which worked fine with Vista.  After the upgrade to Windows 7, I get the following error when scanning:

  A problem prevented the document are analyzed.  Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner.

  I get a different error during an attempt of an overview.  It starts to get an overview of the page, gets about 2 inches to the bottom of the page and then I get the following error:

  An error occurred when you set the properties of the scanner.  If another program is scanning, please wait to complete, and then try again.

  I downloaded the latest driver (and reinstalled several times) of HP with no luck.  No errors are recorded in the Application events.

  I'm going nuts trying to figure out this one!  Thanks for your help.

  BT

  Update:

  I finally had time to unplug the scanner, wait 60 seconds and then plug it again.

  Problem solved.

  Scan of stupid...

  BT

• IOS IPSEC VPN with NAT - translation problem

  I'm having a problem with IOS IPSEC VPN configuration.

  /*

  crypto ISAKMP policy 10

  BA 3des

  preshared authentication

  Group 2

  ISAKMP crypto keys TEST123 address 205.xx.1.4

  !

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac CHAIN

  !

  !

  Map 10 CRYPTO map ipsec-isakmp crypto

  the value of 205.xx.1.4 peer

  transformation-CHAIN game

  match address 115

  !

  interface FastEthernet0/0

  Description FOR the EDGE ROUTER

  IP address 208.xx.xx.33 255.255.255.252

  NAT outside IP

  card crypto CRYPTO-map

  !

  interface FastEthernet0/1

  INTERNAL NETWORK description

  IP 10.15.2.4 255.255.255.0

  IP nat inside

  access-list 115 permit 192.xx.xx.128 0.0.0.3 ip 172.xx.1.0 0.0.0.3

  */

  (This configuration is incomplete / NAT configuration needed)

  Here is the solution that I'm looking for:

  When a session is initiated from the "internal network" to the "distance IPSEC - 172.xx.1.0/30 ' network I want the address scheme '10.15.0.0/16' NAT translation deals with '192.xx.xx.128/30' before forwarding via the IPSEC VPN Tunnel.

  For more information, see "SCHEMA ATTACHED".

  Any help is greatly appreciated!

  Thank you

  Clint Simmons

  Network engineer

  You can try the following NAT + route map approach (method 2 in this link)

  http://www.Cisco.com/en/us/Tech/tk648/tk361/technologies_tech_note09186a0080093fca.shtml

  Thank you

  Raja K

• Site to cause VPN - problem with IOS 12.4 of the site?

  I have a site with several VPN is configured. Sites with routers (Cisco all) running IOS 12.3 or down are fine. New routers with IOS 12.4 may establish the VPN connection and I can ping the remote networks. When I try to access the Intranet homepage from a remote site, the home page is displayed, but I am not able to access all pages. The same thing is happening with another application (SQL Server program). The clent (remote site) can connect to the SQL database and perform a task, and then get a connectivity error. Sites running IOS 12.3 not have these problems.

  ANY IDEAS please?

  Looks like an MTU problem.

  see if you can clear the df bit in the packet encrypted using the command

  Crypto ipsec df - bit clear

  or

  On the output interface, use the ip tcp adjust-mss command 1400.

  Let me know if it helps