Unable to access the hidden administrator account to install programs
original title: passwords and security
Uncle installation the computer for us and put a lot of security, now the anti-virus is out of stock and we cannot install anything because admin settings, the admin account is also hidden but tried to reappear on the command line but it does not allow me to do. My uncle is gone for that and how to get help, I tried a lot of things, but the same is displayed on the screen, whenever I want to download something, it appears a box asking me to insert the administrator password, but there is no type in the box where I can type not I know the password of course... What can I do?
Hello
Better cases are to contact your uncle and get the password. If the antivirus has expired, you should be able to renew it without having to install a new.
Jim
Tags: Windows
Similar Questions
-
How can I reset passwords using the hidden administrator account?
Original title: hidden admin account
How can you reset pass using the hidden account dmin. ? That can make the admin account hidden?
I have windows vista and I am the only administrator and user of my laptop.
Hello
You cannot use the hidden administrator account to reset the password. If you forget your only means of password to reset using the password reset disk. See the article below for further assistance.
What to do if you forget your Windows password
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-passwordActivate hidden administrator account gives you access to the files or the privileges if you are denied access in some cases.
Hope this information helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
original title: Hidden Administrator
Hi, the hidden administrator account is hidden by default, must it be left enabled and protected by password? or must it be left empty without password as default. It is advisable to use this every day as the previous version of windows that you are running as an administrator, or another account should be created?
These two methods are the same and have the same effect and the same security protection, but which is better?
Hi, the hidden administrator account is hidden by default, must it be left enabled and protected by password? or must it be left empty without password as default. It is advisable to use this every day as the previous version of windows that you are running as an administrator, or another account should be created?
These two methods are the same and have the same effect and the same security protection, but which is better?
If the built-in administrator should be enabled or disabled is really your choice.
If you decide to keep activated:
1. give it a password (make a written copy and not to lose).
2. it MUST not be used on a daily basis.
3. should your emergency backup Administrator account ONLY.
4. you must create an account admin with you as an administrator.
5. the choice is yours. Others will say that you must open a regular user account and use it for every day. If you agree, do.t-4-2
t-4-2
-
Program runs in the hidden administrator account, but not the administrator account
I have been using Altium Designer for about 5 months. One day, I tried Eun and got the error "dxp.exe has stopped working. So, after trying a re-boot. I have reinstalled the software. At the end of installation, I get the message "the system administrator has set policies that prevent this facility." The installation then said that the installation has been completed successfully. I tried: unlock all files in the installation directory, run the installation as an administrator, the installation running on the hidden administrator account. Turn off UAC.
The installation leaves me with a program which runs in hidden administrator but not nromal administrator. Even if the install ation was made as normal anministrator.
I am running Windows 7 Home premium, so the control of local security is not available.
Thank you for your help ITKnowledge24. Your post helped me to find parts of the program that I would never know that existed.
It turns out that my problem was in two parts. First what killed the software is primarily a print unrelated dirver. (go figure) Installation errors were caused because I downloaded the version recient most of the manufacturer's Web site. When I reinstalled using the old version, the installation was without error. The software starts to run correctly when the printer driver has been removed. It seems that windows security was only a Kipper.
-
Cannot disable the hidden administrator account
Am running Windows 7 Home Premium. I activated the hidden administrator account and renames and added a password via an elevated command prompt. Now using the same elevated command prompt cannot disable the account. Error name is not found.
What is the exact command that allows you to disable the account?
What account names you see when you type this command:
net users -
MBSA bows 3 Directors, with xp home sp3 how to access the hidden administrator files?
MBSA has identified three Directors on my computer. One is my account, one is built in Administrator account, but a third, called S-1-5-21-... 2805738209 1003 isn't in my folder of user accounts. I'm not managing the computer files of users like xp home does not support this. How can I access this hidden user account and no idea what it is?
Hi Sledgee72,
Your computer is connected to the server or domain?
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:
http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
Hope the helps of information.
-
BlackBerry Bold 9700 smartphones - unable to access the e-mail account configuration
9700 OS 6 on ATT
The problem: the email accounts through the icon of the installer cannot access. Configuration - mail accounts. I can highlight the e-mail accounts in the Setup menu, but can't open it. I can open all other options in the Setup menu
I had this 9700 for 2 years and my configuration of e-mail account and operational full-time. My email has been hacked and I fixed that on my desktop CPU but my 9700 will still not receive or send emails. I did the following:
- Reset the battery removal
- Deleted service books
Everything I could find on correcting my email on the 9700 account is that I have to reset my email from my 9700 account information. Unfortunately, I can not access account configuration menu email form. Help please.
Hello Marshall
Welcome to the Forums of the BlackBerry Support
This is the KB that deals with this error:
KB33220 : cannot access the configuration of Messaging Application or connect to BlackBerry ID on a BlackBerry Smartphone services.
Or you can use your BIS Carrier site to add / modify your e-mail account or use your BlackBerry browser, go to www.blackberry.com/integrate to add / change an e-mail account.
-
Cannot delete some records even with the hidden administrator account.
I am trying to delete some files from the registry on USB devices but I can't seem to do anything.
So far, I've changed ownership of regedit.exe to the administrator and also the folder to administrator approval, but I still get the "error when deleting the keys".I have read several forums on this subject, but the only response I've read is to allow approval (full control) to the folder in question, then delete. It works for others, but I always get "error when deleting key".
I also disabled the UAC.
All solutions?
Just found a solution that has helped me remove these keys for unplugged HW.
(Kudos to Sc_si here on MSA)Open a cmd window:
Enter: set devmgr_show_nonpresent_devices = 1
then start devmgmt.msc (do not use compmgmt.msc)
go to discover that select Show hiden devices
You can see the list of all material never pluged into the computer (gray color), then just uninstall
to hide the Ribbon of unplugged material set devmgr_show_nonpresent_devices = 0
-
I forgot the password of the only administrator account on Vista
I forgot the password for the administrator account only on Vista and the hidden administrator account does not appear in safe mode. What are my options?
Hello
If this is not applicable, you must reinstall the operating system.
"What to do if you forget your Windows password"
http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
"If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
See you soon.
-
I need help for activation of the real administrator account.
I have a problem with Adobe reader 9 standard, Adobe customer service asked the unhide real administrator account before you can continue to help me.
I need help for that.
http://www.Vistax64.com/tutorials/67567-administrator-account.html
Read the above info.
See you soon. Mick Murphy - Microsoft partner
-
How can know you if someone has consulted and used the default Administrator account in Vista?
I was not aware that the default Administrator account is so easily accessible if there is no password on it. In my view, a standard user has accessed this and it seems that the computer is having a lot of problems now. Is there a way to tell? Needless to say I care that much personal info could acceded as well as commercial information. Security, 3 administartors (users) appears in some of the boxes, and I only know 2 of them, myself and the default admin? I'm a recruit of the computer and the other person is somewhat a geek so I could really use some help. I am the system administrator, but don't really know what to look for. I would really appreciate if some wiz could help me.
Thank you
Hello
You can't find if someone has consulted and used the default Administrator account in Vista. You will need to set up a password so that no one will be able to access the admin account.
-
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config
The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.
ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.Hello
Looking at the configuration, there is an access list this nat exemption: -.
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
But it is not applied in the States of nat.
Send the following command to the nat exemption to apply: -.
NAT (inside) 0 access-list sheep
Kind regards
Dinesh Moudgil
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
Unable to access the store using the proxy server.
I'm in Windows 8. I'm unable to access the app Store. He said:-"we were not able to connect to the Store.This could not have come because of a problem with the server or the connection network has expired. Please, wait a few minutes and try again.and some other applications also. I use a 1.1 proxyserver (squid) that requires basic authentication.
However I m able to use some of them as weather, maps, etc.I read solutions who suggested to temporary disable firewall and antivirus for test, I even try it but fails again.
Other suggestions where has been going for windows 8.1 upgrade level, but how can I get this update, as it is downloaded in store that I can't access. Help, please.
Hi Anand,
Your computer is connected to a domain?
Using a proxy server can allow the administrator to limit access to the Internet.
You can reduce the effect of these problems by allowing unauthenticated through your proxy server access. We recommend that you enable unauthenticated access only for connections to URLs used by each application that has a problem. Some proxy servers may suggest that you create a list of URLs (also known as the 'white list') permissions.
Please refer to the article to address these issues that relate to the use of Windows Store apps or use of Microsoft applications that are included with Windows Update or Windows 8, you can include the addresses mentioned in the article in a list of permissions ('white list') on your proxy server and enable HTTP and HTTPS access for them :
The use of proxies authenticated with Windows 8
For more information, see the article:
Using the Proxy selection and Proxy bypass lists
You can also consult the steps by Rajesh Govind, Support Engineer, may 4, 2013 and check.
Windows 8 apps not able to detect the proxy for my machine settings.
Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.
-
Edit and delete the DEP administrator account
I have questions concerning registration of devices program.
Q1: When administrators retired and changed role in the Organization, is it possible to modify or delete the DEP administrator account?
Q2: What details of Directors has changed (name, phone number), is it possible to replace this information? How?
I have this same exact question. I would like to change, and delete accounts.
I was not able to edit all the details of the existing account, only edit / delete permissions.
-
Firefox is unable to access the internet
Hello
Firefox is unable to access the Internet. Internet in the phone works, because all applications in my phone are able to access the Internet. I tried to access several different web pages. Their work. The screen is all black, no error messages appear. The strange thing is that Firefox Sync seems to be able to connect to the server, and I can download plugins.
Best regards
Joel HedestigYou can try using the beta version of firefox mobile?
https://play.Google.com/store/apps/details?ID=org.Mozilla.firefox_beta
Maybe you are looking for
-
Calculate the average per slot?
Hi Chaps, I am a beginner on numbers (almost everything on Mac I would say) and I need help to calculate average values. These are calculated values (column 2) taken on a specific time of the day (column 1).I managed to create a third using a built-i
-
Firefox has started to freeze on the opening and hangs / freezes frequently during use.
Firefox has begun to open very slowly [very]!, as well as to crashing and freezing during use. What's happening on all my three machines, two running Win 7 and the other win 8.I tried refreshing and disabling, but to no avail hardware acceleration.No
-
Photos does not work in the new Apple TV 4
Hi all I got a new Apple TV (A1625 - 32 GB) and it's a great device, apart from a problem. The 'Photos' doesn't work at all. When I go in the Photos, it is showing empty white vignettes with the cloud icon. When you open an image, is to show the rota
-
LaserJet 300 pro M375 - Central of keys does not work
Hello I have a HP LaserJet Pro 300 M375wn with a non-functional touchpad. When I try to press any central icons, nothing happens. If I press the side '? ', 'Cancel', 'return' or ' origin' icons that they work properly. Tried the combination arrow rig
-
Failed to add a logo to Live.ca account like a signature
* Original title: I can't announce a logo for my Live.ca account signature Hello I tried to ad my company logo to my live.ca account. I have youtubed this google without success. There is no photo icon in my box of signature for me to do, and the c