Camileo H20: How to save white balance settings

Similar Questions

• How to save custom color settings?

  Adobe Photoshop CC 2015 release (June 2016, November 2015 and June 2015)

  How to save custom color settings?

  The savings is only victory. environment!

  

  This is how save you it - but the default path is C > users > (your name) > AppData > Roaming > Adobe > color > settings.

  No matter where you save it, as long as you know where to look when you need to load them. But the default location is as good as no matter what.

• any1 know how correct color for white balance/color category?

  Hey what's up guys just finished my 1st clip now I need 2 correct color & color grade. I willl be doing black and white video so told me I need 2 get rid of any color in my images. I 4got 2 set the the white balance on my 7 d when I was shooting sceens sum I can use any help possible as what is the best color to use checker or how my images white balance any help is greatly appreciated thank you.

  Check the basics and do a Google search. The first three listed will be videos, link following points to the Adobe Help files.

  The basic tools are the same as in Photoshop, but there are a bunch of 3 plug-ins third out there that make the job easier. If run you one of the tutorials found in your Google search and you're stuck back to us.

• Canon 5 d Mark ii Images with the value of the white balance fixed. When they are imported into Lightroom, the value is different.

  If I take a shot with the fixed value of 5200K WB (5 d Mark ii) and import into LR 2015.2.1, happens to 4850K. No presets or applied adjustments.

  No idea why? How can I solve this problem?

  Rich

  All raw converters use four multipliers of white balance RGGB tinted and embedded in the raw file EXIF data to set the white balance and 'calculate' the temperature values displayed inside the module development LR WB.

  Scroll down to the "White Balance" section of the DCRAW tutorial PDF here: GUILLERMO LUIJK > TUTORIALS > DCRAW TUTORIAL it's all so raw converters all the rest of the white raw file and 'calculate' the temperature and tint values.

  Here is a Canon 5 d MKII CR2 file with the White Balance adjustment 'in the know' behind closed doors:

  (Data EXIF Maker Notes)

  

  The setting "As Shot" WB in LR shows a Temp of 4800 reading, which should produce a slight visual difference that the planned in-camera closed 5134 parameter, correct?

  

  However, with the LR settings file, "As Shot" above the white balance CR2 is the JPEG file in camera perfectly on my Canon 5 d MKII (raw + JPEG file format). It's just that Temp readings do not, because they are "calculated" four RGGB multipliers. Each raw (LR, opening, C1) converter will probably show the values of temperature and tint different, since they are derived by using "reverse engineering" of the manufacturer of exclusive camera raw data structure and camera sensor response file.

  Keep in mind that the spectral response of the camera is affected by changes in batch. A Canon 5 d MKII body can produce slightly different WB as one another using the same exact settings. Rather than depend on private clos or LR presets use a good white balance card or the ColorChecker Passport to 'calibrate' LR white balance settings standard shooting conditions (daylight, cloudy, Flash, etc.). For critical projects draw card of the white balance at least once for each unique lighting condition. You can then determine the correct inside the LR setting and settings of synchronization of the World Bank through all the images taken with this specific lighting.

• in Kelvin white balance

  Can someone please explain the difference between adobe camera raw settings white balance (temperature and tint) and the in-camera white balance which is measured in kelvins.

  Let's say I like 5350 for temperature and -8 for the shade white balance settings. How would that be in Kelvin on my camera?

  Thank you

  Temperature = degrees Kelvin. It is the blue-yellow axis , which refers to the black body radiation as it gets warmer ( http://en.wikipedia.org/wiki/Black-body_radiation ).

  Tint is just another axis 90 degrees to that. The axis of the color is Green/magenta.

  
  

  You set (refine) along two axes in the D800, same by moving the point vertically or horizontally. But the camera and the CAB will not necessarily agree because they interpret things a little differently. In any case: If you shoot in raw, there is no need to make fine adjustments to it in camera. Do it in ACR. The setting of white balance the camera affects not the sensor data, or the file itself. ACR reads just the setting of the device to get a rough starting point.

• Bridge CS5 applies wrong white balance during extraction of thumbnails (only for raw files)

  Hello to all the assistants of Adobe,

  Photographer welder here. I use a Canon T2i and I've been shooting raw with automatic white balance.

  After I downloaded the CR2 files to the bridge, bridge starts thumbnail extraction. It is then that the problem begins: I watch bridge thumbnail extraction photo after photo, turning them into white balance bad one by one. After the bridge is done, I open one of these photos in Camera Raw, it shows the picture in the "custom white balance". I could go back to "As Shot". But now, each Bridge photo has custom white balance and is difficult to bridge. This screenshot shows what looks like my bridge after thumbnail extraction...

  Yesterday, just out of curiosity, I took a few photos with the settings of the different on the camera white balance. I downloaded their bridge and bridge too wrote all the white balance settings. Then I imported the same pictures (from the same files) to iPhoto, they appear with writing correct balance. Please see the second screenshot.

  The third screenshot shows a unique photo that I opened the bridge to Camera Raw and the same photo, as it appears in iPhoto, the original two.

  

  Again, this only happens to CR2 files. All TIF, jpeg files are fine.

  Any ideas?

  Thank you!

  -Wolfie

  Any ideas?

  First of all, taken of view Raw has the advantage of the evolution of the color temperature (balance of Pentecost) to what ever you like everything you shot in camera.

  It seems once you have registered a custom default setting white balance and it is applied to each new file because you said bridge to do. The best way out of this is to open a raw file in ACR and the basic right tab you see a small icon (next to the base word) submenu. Click on it and the line select "Reset Camera Raw defaults" downstairs.

  Also decide if you want to stay in 16-bit mode (you're now as shown in the blue line under the preview). If you want the chance it to 8 bits, just click on this blue line and choose your options in this menu. Just do it once for that same camera files, ACR remembers the settings for you.

  Using 16-bit mode has advantages when the color corrections using critical (but you should also replace the ProPhoto color mode in my opinion). The downside is that the 16 bit doubles compared to 8-bit file size

  Having put default ACR should immediately make your thumbs by building of new inches and previews, but if not, you must choose purge the cache for the file from the menu Tools / cache / purge the cache for the file. Now the new settings will apply.

  It may take a while so let bridge do its job properly before starting other jobs in bridge (see the activity bar downstairs left to check if the bridge is still cached).

• Camileo H10 - White Balancing does not work

  I bought this recorder in December 2008. I tested some records inside, outside and I found, that White Balancing does not work.
  I can put it in automatic or manual, but all videos are little pink. Is this a firmware problem or is it a bad piece? Where can I get the new firmware?

  Thanks for the reply

  Hello Bunak

  Toshiba has released the new update and you can find it on Toshiba support and download page under http://eu.computers.toshiba-europe.com > support & downloads
  On the drivers download page please choose the criteria for follow-up:

  Product type options
  Family digital Imagin
  Range of digital video cameras
  Camileo H10 model
  OS operating system practice
  Type of driver Firmware update

  So here you can find the update to Firmware version 1.1. Last modification date is 12/02/08.

  In order to provide the best quality, update Firmware for Camileo H10 results with feature upgrade as follows him.

  1 give input MIC (improve the volume of MIC)
  2. set the focus window (improve the AF)
  3 tune AE to avoid exposure
  4 tune matrix color and saturation (performance of color)
  5. set the noise filter (improve the noise level)
  6. grant WB (improve the AWB)
  7 change the string from the user interface in CZ

  Here the steps how to upgrade the F/W (Firmware):

  First of all, there are two different language version of the UI (User Interface) of the EU & UK and EEMEA version. Please select the appropriate according to your language file instead.

  -EU & UK F/W version 1.1 include: English, Deutsch, Español, Português, Italiano and French, Dutch
  -EAST F/W version 1.1 include: English, Czech, Greek, Hungarian, Polish, Russian, Turkish, Slovak

  * Files of F/W 1.Copy to an SD card *.
  -Format SD card. Make sure that the FAT file system is selected before formatting.
  -Copy the F/W (zburnT_C10.run.elf and DCIM folder) files in the root directory of the SD card
  (PS: there is another folder and file in the DCIM folder, please, do not change the content of this)
  DCIM folder)

  * 2. Firmware Update (Please make sure of course he didn't is no battery inside the unit and the power adapter is not connected to the camera) *.
  -Open the Panel first
  -Insert the SD card which has the F/W files
  -Insert the battery (make sure that the battery is full), then plug the power adapter to the camera.
  -Press the shutter button when the message press shutter to update to start the update process. During the F/W update of the LED will keep flashing. Do not remove the battery or disconnect the AC adapter during this operation, otherwise the camera will be damaged.

  * 3. Update has been completed *.
  -The LED will stop flashing once the firmware update completed (Please make sure that the flashing stop light)
  -Restart the unit remove before adapter, the battery and the SD card in camera in order to avoid the firmware update again.
  -Upgrade of the F/W was over.

  Please follow these steps and let me know if everything is Ok now.

  Good luck!

• How to define the details of the White Balance metadata Bridge Cs6 shot with 5 d MarkIII?

  Is it possible to get detailed information of the White Balance setting in the bridge metadata?  I get only "custom"; My instructor at the College needs more detail in my contacts boards.

  Thanks for any imput

  Is it possible to get detailed information of the White Balance setting in the bridge metadata?  I get only "custom"; My instructor at the College needs more detail in my contacts boards.

  Thanks for any imput

  You can't get this info in a Board-contact, nor is it easy to get other then look at the setting of the device you used to shoot files. Maybe it's somewhere hidden deep in the exif data, but I can't find it with the exact number.

  Shooting Raw these WB figures do not apply because you can adjust the color temperature and tint to what you want. Taken jpeg, your options are limited due to the fact that the raw data is already processed and the evolution of the effects of temperature and color of the entire image.

  Try to shoot a Raw and jpeg together from the same scene. The one with the light of day and the other with artificial light conditions. (personally, I put my WB set closed at 5,500 but with the auto settings, you can also see the difference) Try to fix the jpeg and Raw file in ACR and see what I mean.

  And to be honest, if your instructor at the College would like to have what he should tell you also why he wants to and how you can put it back...

• How can I get my settings to save a window opening in Middle normal and maximized.

  Original title: cannot get windows size to save.

  How can I get my settings to record with respect to the windows that open in normal and maximized parameters.

  I did the right click on Solution Explorer icons and maximized value, but they open into small windows.

  Thank you

  Here are some instructions I've done for people who have this error message and are sometimes a little nervous about editing the registry:

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines in bold text into the new Notepad file:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\system\currentcontrolset\control\windows]
  "ErrorMode" =: 00000002

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  fix13.reg

  After you save the file, close Notepad.

  Locate the file fix13.reg on your desktop and double-click it.

  Alternatively, you can right-click on the fix13.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the fix13.reg file when you are finished.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:

  http://support.Microsoft.com/kb/124873

• How can I save the page settings in the Notepad. I wish to record the size of A4 paper but just default to 'Letter' every time that I re - open Notepad.

  I can't save the page settings in the Notepad. I wish to record the size of A4 paper but just default to 'Letter' every time that I re - open Notepad.

  Hello

  Included with Windows Notepad text editor allows you to configure the layout including headers, footers and margins. These options are normally not saved between sessions, but with this Notepad tweak can be done to save the changes. Please try this method and answer us.

  Open your registry database and find or create the key below.

  A. go to start and regedit and press ENTER.

  B. HKEY_CURRENT_USER\Software\Microsoft\Notepad

  C. create a new DWORD value called "fSavePageSettings" and there the value '1' to save the settings page.
  D. create a new DWORD value called "fSaveWindowPositions" and it "1" to record the position of the window.
  E. restart Windows for the change to take effect.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows

• How to save the settings of the application (variables)?

  How can I save the application settings? I have a variable, which by default is 0. User can it set to 1 if it has something to do. How it save? It is possible without e/s?

  The best place to start is SharedObject.

• 2 How to save the settings for all users.

  I recently had to move the hearing to a vista machine.

  Now, the Setup is a slight pain in the * mainly because of Vista in Vista.

  But now that I put it in place under my profile how can I keep those settings for all users?

  When a new person connects to this computer, it goes to the built-in default material (which of course didn't is not connected to anything) and not to the sound card that is connected to the mixer.

  So what I'm after, is a way to save all settings (including workspaces) and their default for all users (including users)

  (Please tell me there's a way to do it...) Having to configure AA for each trainee or a guest is going to be an incredible pain in my *.)

  Thank you.

  Audition CS6 and later have the opportunity to create "Machine-specific device settings" that replace a users roaming profile preference files when you connect to jobs at random, but cela was not available in Audition 3.  There may be solutions workaround, depending on your network configuration, but nothing as nice and direct.

• How to save the slide show settings so when I press on Ctrl + enter only what I want?

  How to save the slide show settings so when I press on Ctrl + enter only what I want?

  huh?

  R

  I tested what you gave me there Rob. On my Mac, I have two monitors:

  -Blacken / display slide show on a monitor (the primary monitor, if I move LR in my secondary follow-up, the slide show is still on the first, but the second still works normal with LR just sitting there).

  -If I turn off slide durration I manually advance the slides with the right arrow.

  -I don't have 'Lightroom' (or with my settings current all) text on the screen.

  -Does not repeat itself.

  My Windows machine is not two monitors, but the others work properly...

  In other words, until I thought about it differently. As we seek to change the slideshow settings, I was naturally in the slideshow module. But I then remembered that the interest of the Impromtu Slideshow is that you can view the slide show playback from any module. Once I went back to the library and click Command / Ctrl + Enter, then I saw exactly what you're talking about. Both monitors are blackened, duration of the slide is ignored, etc.

  You know why? As the Impromptu slideshow uses one of the models outside the slideshow Module. Which one? Well, by default +, of course. How do change you that? Right-click (Cmde) slideshow model you prefer to use and select «Use for Impromptu slide show»

• How to turn off the sound recording on a Camileo H20?

  I just got a new VCR Camileo H20. Directly from the box.

  I use it for video road races to complement the photographs that I take with my Nikon digital camera.

  I am really satisfied with the short video clips that I record, whether they are clear and sharp (fingers crossed). They are very well received by the riders.

  * http://www.youtube.com/watch?v=_bNCKCKafCw *.

  The only problem I have is that I would like to turn the microphone off. Supporters cry comments that are usually fairly light, but recently one or two went over the top with comments derogatory offence.

  I know I can turn off the sound in the video editing software that I use, but as I said, I would like to turn the microphone off.

  I do not understand why, when I put the * sound * to * Off * in the Menu it still records the sound.

  Any help on this would be really appreciated.

  Thank you.

  > I do not understand why, when I put the sound on Off the menu it still sound recordings.

  I m H20 not owner but I have a Camielo: 30. But the two are very similar, the sound-> off the coast of the option that you can find in the menu does not sound recording via microphone, but the sound that appears by pressing the buttons by navigating through the menu.

  If you can not turn off the sound while you record a video.

• How fast on SD card to Camileo H20?

  That speed is the lowest speed to use with a Camileo H20 to ensure that registration is also smooth and fine as possible?

  Hi recman,.

  I checked the manual Camileo H20 and I could t find details the requirements SD card so I think you can use the SD/SDHC cards to recode movies in Full HD.

  These days are flash cards are very cheap, so I recommend a class 6 SDHC card. If you buy a 4 GB card for example, they should cost less than 10 euro.
  By the way: I have good experiences with flash SanDisk cards.

  I guess that a faster SD card will bring only a performance gain if you copy the video to your computer via the flash card reader, I think.